Common use of Provisioning of Line Sharing and Splitter Space Clause in Contracts

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of Ruddata’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata in a central office in which Ruddata is located, Ruddata shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata shall pay the electronic or manual ordering charges as applicable when Ruddata orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for Ruddata’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Solution Telecom with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Solution Telecom must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Solution Telecom may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataSolution Telecom’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Solution Telecom in a central office in which Ruddata Solution Telecom is located, Ruddata Solution Telecom shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Solution Telecom shall pay the electronic or manual ordering charges as applicable when Ruddata Solution Telecom orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataSolution Telecom’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Covista with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Covista must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Covista may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataCovista’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Covista in a central office in which Ruddata Covista is located, Ruddata Covista shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Covista shall pay the electronic or manual ordering charges as applicable when Ruddata Covista orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataCovista’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata AmTel with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata AmTel must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata AmTel may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataAmTel’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata AmTel in a central office in which Ruddata AmTel is located, Ruddata AmTel shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata AmTel shall pay the electronic or manual ordering charges as applicable when Ruddata AmTel orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataAmTel’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Newcomm with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Newcomm must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Newcomm may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataNewcomm’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Newcomm in a central office in which Ruddata Newcomm is located, Ruddata Newcomm shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata Newcomm shall pay the electronic or manual ordering charges as applicable when Ruddata Newcomm orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataNewcomm’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata SPARDI with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata SPARDI must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata SPARDI may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataSPARDI’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata SPARDI in a central office in which Ruddata SPARDI is located, Ruddata SPARDI shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata SPARDI shall pay the electronic or manual ordering charges as applicable when Ruddata SPARDI orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataSPARDI’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ACN with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ACN must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ACN may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataACN’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata ACN in a central office in which Ruddata ACN is located, Ruddata ACN shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata ACN shall pay the electronic or manual ordering charges as applicable when Ruddata ACN orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataACN’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata JCM with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata JCM must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata JCM may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataJCM’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata JCM in a central office in which Ruddata JCM is located, Ruddata JCM shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata JCM shall pay the electronic or manual ordering charges as applicable when Ruddata JCM orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataJCM’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Starlink with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Starlink must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Starlink may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataStarlink’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Starlink in a central office in which Ruddata Starlink is located, Ruddata Starlink shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Starlink shall pay the electronic or manual ordering charges as applicable when Ruddata Starlink orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataStarlink’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ▇▇▇▇ with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ▇▇▇▇ must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ▇▇▇▇ may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of Ruddata’s ▇▇▇▇’▇ submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata ▇▇▇▇ in a central office in which Ruddata ▇▇▇▇ is located, Ruddata ▇▇▇▇ shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata ▇▇▇▇ shall pay the electronic or manual ordering charges as applicable when Ruddata ▇▇▇▇ orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for Ruddata’s ▇▇▇▇’▇ data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata BAK with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata BAK must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata BAK may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataBAK’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata BAK in a central office in which Ruddata BAK is located, Ruddata BAK shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata BAK shall pay the electronic or manual ordering charges as applicable when Ruddata BAK orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataBAK’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Charter with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Charter must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Charter may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataCharter’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Charter in a central office in which Ruddata Charter is located, Ruddata Charter shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata Charter shall pay the electronic or manual ordering charges as applicable when Ruddata Charter orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataCharter’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Think 12 with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Think 12 must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Think 12 may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataThink 12’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Think 12 in a central office in which Ruddata Think 12 is located, Ruddata Think 12 shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Think 12 shall pay the electronic or manual ordering charges as applicable when Ruddata Think 12 orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataThink 12’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Sail Telecom with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Sail Telecom must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Sail Telecom may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataSail Telecom’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Sail Telecom in a central office in which Ruddata Sail Telecom is located, Ruddata Sail Telecom shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Sail Telecom shall pay the electronic or manual ordering charges as applicable when Ruddata Sail Telecom orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataSail Telecom’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ▇▇▇▇ with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ▇▇▇▇ must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ▇▇▇▇ may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of Ruddata’s ▇▇▇▇’▇ submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Reed in a central office in which Ruddata ▇▇▇▇ is located, Ruddata ▇▇▇▇ shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will bill and ▇▇▇▇ and Ruddata shall pay the electronic or manual ordering charges as applicable when Ruddata ▇▇▇▇ orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for Ruddata’s ▇▇▇▇’▇ data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata CCI with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata CCI must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata CCI may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataCCI’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata CCI in a central office in which Ruddata CCI is located, Ruddata CCI shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata CCI shall pay the electronic or manual ordering charges as applicable when Ruddata CCI orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataCCI’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ICG with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ICG must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ICG may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataICG’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata ICG in a central office in which Ruddata ICG is located, Ruddata ICG shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata ICG shall pay the electronic or manual ordering charges as applicable when Ruddata ICG orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataICG’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata INET with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata INET must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata INET may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataINET’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata INET in a central office in which Ruddata INET is located, Ruddata INET shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇▇▇▇▇▇ will bill and Ruddata INET shall pay the electronic or manual ordering charges as applicable when Ruddata INET orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataINET’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ACI with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ACI must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ACI may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataACI’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata ACI in a central office in which Ruddata ACI is located, Ruddata ACI shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata ACI shall pay the electronic or manual ordering charges as applicable when Ruddata ACI orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataACI’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Hotline with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Hotline must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Hotline may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataHotline’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Hotline in a central office in which Ruddata Hotline is located, Ruddata Hotline shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata Hotline shall pay the electronic or manual ordering charges as applicable when Ruddata Hotline orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataHotline’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Conextel with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Conextel must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Conextel may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataConextel’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Conextel in a central office in which Ruddata Conextel is located, Ruddata Conextel shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata Conextel shall pay the electronic or manual ordering charges as applicable when Ruddata Conextel orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataConextel’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata OnePoint with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata OnePoint must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata OnePoint may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataOnePoint’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata OnePoint in a central office in which Ruddata OnePoint is located, Ruddata OnePoint shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata OnePoint shall pay the electronic or manual ordering charges as applicable when Ruddata OnePoint orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataOnePoint’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata Vertex with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata Vertex must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata Vertex may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of RuddataVertex’s submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata Vertex in a central office in which Ruddata Vertex is located, Ruddata Vertex shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ bill and Ruddata Vertex shall pay the electronic or manual ordering charges as applicable when Ruddata Vertex orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for RuddataVertex’s data.

Provisioning of Line Sharing and Splitter Space. 3.2.1 BellSouth will provide Ruddata ONS with access to the High Frequency Spectrum as follows: 3.2.1.1 To order High Frequency Spectrum on a particular Loop, Ruddata ONS must have a Digital Subscriber Line Access Multiplexer (DSLAM) collocated in the central office that serves the End User of such Loop. 3.2.1.2 Ruddata ONS may provide its own splitters or may order splitters in a central office once it has installed its DSLAM in that central office. BellSouth will install splitters within thirty-six (36) calendar days of Ruddata’s ONS’ submission of an error free Line Splitter Ordering Document (LSOD) to the BellSouth Complex Resale Support Group. 3.2.1.3 Once a splitter is installed on behalf of Ruddata ONS in a central office in which Ruddata ONS is located, Ruddata ONS shall be entitled to order the High Frequency Spectrum on lines served out of that central office. BellSouth will ▇▇▇▇ and Ruddata ONS shall pay the electronic or manual ordering charges as applicable when Ruddata ONS orders High Frequency Spectrum for End User service. 3.2.1.4 BellSouth shall test the data portion of the Loop to ensure the continuity of the wiring for Ruddata’s ONS’ data.