Quality Assurance/Quality Control Plan Sample Clauses

Quality Assurance/Quality Control Plan. The QA/QCP shall be complete in all respects addressing all types of inspections/test for work covered by Final Documents submissions, and for the commissioning of the mechanical, electrical, and fire/life safety systems.
View SourceView Similar (2)
Quality Assurance/Quality Control Plan. The Design-Builder shall provide a draft final QA/QCP addressing all systems, equipment, materials and construction represented by the Design Development submission.
View SourceView Similar (2)
Quality Assurance/Quality Control Plan. The GEC shall update and maintain the existing program Quality Assurance / Quality Control (QA/QC) Plan to document the quality control program to be implemented by the project team. The GEC shall conduct Quality Control procedures under respective work tasks and sub-tasks. The GEC shall perform quarterly quality audits to ensure the QA/QC Plan is being implemented by the project team. The GEC shall conduct spot-check reviews to verify that the GEC team and others are submitting QC documentation and complete redlines by product (including milestones for design products). The GEC shall schedule and work with GEC Project and Subject Matter Leads to facilitate the completion of provider evaluation forms and documentation as needed to support the evaluations, at a general timing of at least every milestone submittal for design products and quarterly for non-design products. The GEC shall report upon the program’s progress in quality tracking and enforcement, schedule enforcement as documented in the provider evaluations, as well as proposed strategies for improvement in quality and schedule adherence at the GEC Quarterly Status Report. DocuSign Envelope ID: 3FC526E5-7650-4F1C-BCF1-67484E873D0D
View Source
Quality Assurance/Quality Control Plan. 2.20.1 Implementation of Quality Assurance Plan. Attached as Appendix R is a quality assurance/quality control procedure and plan and Supplier source inspection plan detailing Contractor’s system, including quality plans and procedures, to direct and control its organization with regard to quality (the “Quality Assurance Plan”). Contractor’s Quality Assurance Plan as set forth in Appendix R shall be consistent with Applicable Laws, ISO 9001 criteria, Applicable Codes and Standards and GECP. Contractor shall perform the Work in compliance with the Quality Assurance Plan and assume all costs associated with compliance therewith. Contractor shall cause each of its Suppliers to implement a quality assurance program that complies with the Quality Assurance Plan as applicable to the Work that such Supplier performs, including the implementation and maintenance of a rigorous inspection program, maintaining daily logs of inspections performed in compliance therewith, and the implementation and adherence to the “build it clean, build it tight” requirements of the Quality Assurance Plan.
View Source
Quality Assurance/Quality Control Plan. All quality control procedures for materials and workmanship will be in accordance with the contract provisions and Construction Manual. Project Materials Files ▇▇▇▇▇ ▇▇▇▇▇▇ Initial ROM HQ Materials Lab CM 9-1.5A ROM Maintenance ▇▇▇▇▇ ▇▇▇▇▇▇/▇▇▇▇ ▇▇▇▇ CM 9-1.5A Tester Qualification ▇▇▇▇▇ ▇▇▇▇▇▇▇ Acceptance Sampling As assigned CM 9-4, and Special Provisions Field Acceptance and Testing As assigned CM 9-4, and Special Provisions Lab Acceptance Testing Region Materials Lab CM 9-4, and Special Provisions Source Approval Varies CM 9-1.5B ▇▇▇▇ ▇▇▇▇▇▇▇ Field Verification of Materials ▇▇▇▇ ▇▇▇▇▇▇ CM 9-1.5C ▇▇▇▇ ▇▇▇▇▇▇▇ Others as Necessary WZTC Review (If Applicable) ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ Traffic Control Plans and MUTCD Maintenance Review ▇▇▇▇▇▇ ▇▇▇▇▇▇ IM 01.02 Management Review ▇▇▇▇▇ ▇▇▇▇▇▇▇▇ Engineering Manager Region Compliance Review ▇▇▇▇ ▇▇▇▇▇▇ CM 10-5 Materials Certification ▇▇▇ ▇▇▇▇▇▇ Facilitating action and making quality, timely project decisions is directly related to how well we communicate as a team. Effective communication requires sufficient, timely and accurate flow of information through the appropriate channels. The communication channels and protocol for various project activities are as follows: Prime Contractor: ▇▇▇▇▇▇ Construction & Management, Inc. (Office) 534-1030 1st Contact: ▇▇▇▇ ▇▇▇▇▇▇▇▇, TCM – ▇▇▇▇▇▇ Construction (Cell) ▇▇▇-▇▇▇▇ 2nd Contact: ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇, TCS – ▇▇▇▇▇▇ Construction (Cell) ▇▇▇-▇▇▇▇ 3rd Contact: TBA Project Manager (Interim): ▇▇▇▇ ▇▇▇▇▇▇ 475-4680 534-1030 SPCC Lead: ▇▇▇▇ ▇▇▇▇▇▇▇▇ 939-9464 534-1030 TESC Lead: ▇▇▇▇ ▇▇▇▇▇▇▇▇ 939-9464 534-1030 Project Superintendent: ▇▇▇▇ ▇▇▇▇▇▇▇▇ 939-9464 534-1030 WSDOT: ▇▇▇ ▇▇▇▇▇▇, Project Engineer Cell Home Office Project Inspector (Civil): ▇▇▇▇ ▇▇▇▇▇▇▇ 939-4250 324-6237 Project Inspector (Structures): ▇▇▇▇ ▇▇▇▇▇▇ 993-3548 324-6236 Project Inspector (Structures): ▇▇▇▇ ▇▇▇▇▇▇▇ 939-1822 324-6240 Project Manager: ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ 590-3732 487-4584 324-6235 Assistant Project Engineer: ▇▇▇▇ ▇▇▇▇▇ 209-7552 466-4368 324-6238 Project Engineer: ▇▇▇ ▇▇▇▇▇▇ 220-5347 467-6991 324-6232 Spokane Maintenance: ▇▇▇▇▇▇ ▇▇▇▇▇▇ 324-6586 Other Agencies: Emergency 911 Washington State Patrol 456-4101 Spokane County Sheriff 477-2240 Avista Utilities- ▇▇▇ ▇▇▇▇▇ (Power) 495-2305
View Source
Quality Assurance/Quality Control Plan. The CONSULTANT will provide a QA/QC Plan. The Plan will provide a written description of the intended actions to verify delivery of a high-quality product to the AGENCY.
View Source
Quality Assurance/Quality Control Plan. The GEC shall update and maintain the existing program Quality Assurance / Quality Control (QA/QC) Plan to document the quality control program to be implemented by the project team. The GEC shall conduct Quality Control procedures under respective work tasks and sub-tasks. The GEC shall perform bi-annual quality audits to ensure the QA/QC Plan is being implemented by the project team. The GEC shall conduct spot-check reviews to verify that the GEC team and others are submitting QC documentation and complete redlines by product (including milestones for design products). The GEC shall schedule and work with GEC Project and Subject Matter Leads to facilitate the completion of provider evaluation forms (as requested by TxDOT) and documentation as needed to support the evaluations, at a general timing of at least every milestone submittal for design products and quarterly for non-design products. The GEC shall report upon the program’s quality and enforcement in a quality briefing. DocuSign Envelope ID: CD7AC889-92AB-43FB-B747-828C4DC6138B Contract No. 14-6SDP5028 Supplemental Agreement No. 3 145.2.a Updates (as necessary) to GEC QA/QC Plan in electronic format, accessible to STATE and sub-consultants 145.2.b Bi-annual GEC quality audits and documentation of QA/QC implementation 145.2.c PDE Redlines Spot Check Log and Documentation 145.2.d PDE Provider Evaluation Log 145.2.e GEC and PDE Quality Status Summary and Recommendations Briefing
View Source
Quality Assurance/Quality Control Plan 
View SourceView Similar (3)

Related to Quality Assurance/Quality Control Plan

  • COUNTY’S QUALITY ASSURANCE PLAN The County or its agent will evaluate the Contractor’s performance under this Contract on not less than an annual basis. Such evaluation will include assessing the Contractor’s compliance with all Contract terms and conditions and performance standards. Contractor deficiencies which the County determines are severe or continuing and that may place performance of the Contract in jeopardy if not corrected will be reported to the Board of Supervisors. The report will include improvement/corrective action measures taken by the County and the Contractor. If improvement does not occur consistent with the corrective action measures, the County may terminate this Contract or impose other penalties as specified in this Contract.

  • Quality Assurance Program An employee shall be entitled to leave of absence without loss of earnings from her or his regularly scheduled working hours for the purpose of writing examinations required by the College of Nurses of Ontario arising out of the Quality Assurance Program.

  • Use; Quality Control a. Neither party may alter the other party’s trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party’s trademarks only in good faith and in a dignified manner consistent with such party’s use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated.

  • Quality Assurance The parties endorse the underlying principles of the Company’s Quality Management System, which seeks to ensure that its services are provided in a manner which best conforms to the requirements of the contract with its customer. This requires the Company to establish and maintain, implement, train and continuously improve its procedures and processes, and the employees to follow the procedures, document their compliance and participate in the improvement process. In particular, this will require employees to regularly and reliably fill out documentation and checklists to signify that work has been carried out in accordance with the customer’s specific requirements. Where necessary, training will be provided in these activities.