Request in Good Order Sample Clauses

The "Request in Good Order" clause defines the requirement that any request or submission made under the agreement must meet specific criteria or standards to be considered valid and actionable. Typically, this means that all necessary forms must be completed accurately, supporting documentation provided, and any procedural steps followed as outlined by the agreement or relevant policies. This clause ensures that parties only need to act on requests that are properly prepared, reducing confusion, administrative errors, and delays caused by incomplete or incorrect submissions.
Request in Good Order. Any election or request you make to us under this Contract must be a Request in Good Order. A Request in Good Order is an election or request that is:
View SourceView Similar (11)
Request in Good Order. Any election or request you make to us under this Contract must be a Request in Good Order. A Request in Good Order is an election or request that is: 1) complete and satisfactory to us; 2) sent to us on our form or in a manner satisfactory to us, which may, at our discretion, be by telephone or electronic means; and 3) received by us at our Administrative Office. We are not bound by a request until we acknowledge it. We will deem a Request in Good Order to be a standing order. It may be modified or revoked only by a subsequent Request in Good Order, when permitted by the provisions of this Contract. You may be required to return this Contract to us in connection with a request. If a Request in Good Order is received by us on a day that is not a Market Day, or after the first Market Close of a Market Day, we will treat it as if it were received at the start of the next Market Day.
View SourceView Similar (2)
Request in Good Order. In the case of a surrender, this Contract terminates. The amount paid upon a surrender is the Surrender Value. Withdrawals You may take withdrawals from this Contract at any time before the earliest of: 1) the Annuity Payout Initiation Date; 2) a death for which a Death Benefit is payable; or 3) the date that this Contract is surrendered. A withdrawal must be made by a Request in Good Order. The amount of any withdrawal must be at least $500. No withdrawal may be made if it would reduce the Account Value to less than the Minimum Required Value. The Minimum Required Value is set out on the Contract Specifications page. A withdrawal will be taken: 1) first proportionally from funds that then qualify for a waiver of the Early Withdrawal Charge pursuant to the provisions of the Crediting Strategy endorsement; 2) then from the Purchase Payment Account; 3) then proportionally from Declared Rate Strategies having the shortest Term until all Declared Rate Strategies are exhausted; and 4) then proportionally from Indexed Strategies having the shortest Term. Exchanges, Transfers, and Rollovers An amount paid on a withdrawal or surrender may be paid to or for another annuity or tax-qualified account in a tax-free exchange, transfer, or rollover to the full extent allowed by federal tax law.
View SourceView Similar (2)

Related to Request in Good Order

  • Field Order A written order issued by Engineer which requires minor changes in the Work but does not change the Construction Contract Price or the Construction Contract Times.

  • Interconnection Request The Interconnection Customer’s request, in accordance with the Tariff, to interconnect a new Small Generating Facility, or to materially increase the capacity of, or make a material modification to the operating characteristics of, an existing Small Generating Facility that is interconnected with the New York State Transmission System or the Distribution System. For the purposes of this Agreement, this definition of Interconnection Request shall supersede the definition of Interconnection Request set out in Attachment X to the ISO OATT. Interconnection Study – Any study required to be performed under Sections 32.2 or 32.3 of the SGIP. Material Modification – A modification that has a material impact on the cost or timing of any Interconnection Request with a later queue priority date. New York State Transmission System – The entire New York State electric transmission system, which includes: (i) the Transmission Facilities under ISO Operational Control; (ii) the Transmission Facilities Requiring ISO Notification; and (iii) all remaining transmission facilities within the New York Control Area. NYISO Deliverability Interconnection Standard – The standard that must be met, unless otherwise provided for by Attachment S to the ISO OATT, by (i) any generation facility larger than 2MW in order for that facility to obtain ▇▇▇▇; (ii) any Class Year Transmission Project proposing to interconnect to the New York State Transmission System and receive Unforced Capacity Delivery Rights; (iii) any entity requesting External ▇▇▇▇ Rights, and (iv) any entity requesting a ▇▇▇▇ transfer pursuant to Section 25.9.5 of Attachment S to the ISO OATT. To meet the NYISO Deliverability Interconnection Standard, the Interconnection Customer must, in accordance with the rules in Attachment S to the ISO OATT, fund or commit to fund any System Deliverability Upgrades identified for its project in the Class Year Deliverability Study. NYISO Minimum Interconnection Standard – The reliability standard that must be met by any generation facility or Class Year Transmission Project that is subject to NYISO’s Large Facility Interconnection Procedures in Attachment X to the ISO OATT or the NYISO’s Small Generator Interconnection Procedures in this Attachment Z, that is proposing to connect to the New York State Transmission System or Distribution System, to obtain ERIS. The Minimum Interconnection Standard is designed to ensure reliable access by the proposed project to the New York State Transmission System or to the Distribution System. The Minimum Interconnection Standard does not impose any deliverability test or deliverability requirement on the proposed interconnection. Operating Requirements – Any operating and technical requirements that may be applicable due to Regional Transmission Organization, Independent System Operator, control area, or the Connecting Transmission Owner’s requirements, including those set forth in the Small Generator Interconnection Agreement. Operating Requirements shall include Applicable Reliability Standards. Party or Parties – The NYISO, Connecting Transmission Owner, Interconnection Customer or any combination of the above. Point of Interconnection – The point where the Interconnection Facilities connect with the New York State Transmission System or the Distribution System. Reasonable Efforts – With respect to an action required to be attempted or taken by a Party under this Agreement, efforts that are timely and consistent with Good Utility Practice and are otherwise substantially equivalent to those a Party would use to protect its own interests. Small Generating Facility – The Interconnection Customer’s facility, no larger than 20 MW for the production and/or storage for later injection of electricity identified in the Interconnection Request if proposing to interconnect to the New York State Transmission System or Distribution System, but shall not include (i) facilities proposing to simply receive power from the New York State Transmission System or the Distribution System; (ii) facilities proposing to interconnect to the New York State Transmission System or the Distribution System made solely for the purpose of generation with no wholesale sale for resale nor to net metering; (iii) facilities proposing to the New York State Transmission System or the Distribution System made solely for the purpose of net metering; (iv) facilities proposing to interconnect to LIPA’s distribution facilities; and (v) the Interconnection Customer’s Interconnection Facilities. A facility will be treated as a single Small Generating Facility if all units within the facility are behind a single facility meter, even if such units are different technology types. System Deliverability Upgrades – The least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard for Capacity Resource Interconnection Service. System Upgrade Facilities – The least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modification or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff – The NYISO’s Open Access Transmission Tariff, as filed with the FERC, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Interconnection Customer is engaged in on- site test operations and commissioning of the Small Generating Facility prior to Commercial Operation. Upgrades – The required additions and modifications to the Connecting Transmission Owner’s portion of the New York State Transmission System or the Distribution System at or beyond the Point of Interconnection. Upgrades may be System Upgrade Facilities or System Deliverability Upgrades Distribution Upgrades. Upgrades do not include Interconnection Facilities.

  • Sale Order The Sale Order shall, among other things, (a) approve, pursuant to sections 105, 363 and 365 of the Bankruptcy Code, (i) the execution, delivery and performance by Sellers of this Agreement, (ii) the sale of the Acquired Assets to Buyer on the terms set forth herein and free and clear of all Encumbrances (other than Permitted Encumbrances), and (iii) the performance by Sellers of their obligations under this Agreement, (b) authorize and empower Sellers to assume and assign to Buyer the Transferred Contracts, (c) find that Buyer is a “good faith” purchaser within the meaning of section 363(m) of the Bankruptcy Code, find that Buyer is not a successor to any Seller, and grant Buyer the protections of section 363(m) of the Bankruptcy Code, (d) find that Buyer shall have no Liability or responsibility for any Liability or other obligation of any Seller arising under or related to the Acquired Assets other than as expressly set forth in this Agreement, including successor or vicarious Liabilities of any kind or character, including any theory of antitrust, environmental, successor, or transferee Liability, labor law, de facto merger, or substantial continuity, (e) find that Buyer has provided adequate assurance (as that term is used in section 365 of the Bankruptcy Code) of future performance in connection with the assumption of the Transferred Contracts, (f) find that Buyer shall have no Liability for any Excluded Liability, (g) find that the consideration provided by Buyer pursuant to this Agreement constitutes reasonably equivalent value and fair consideration for the Acquired Assets, (h) find that Buyer and Sellers did not engage in any conduct which would allow this Agreement to be set aside pursuant to section 363(n) of the Bankruptcy Code and (i) order that, notwithstanding the provisions of the Federal Rules of Bankruptcy Procedures 6004(h) and 6006(d), the Sale Order is not stayed and is effective immediately upon entry. Buyer agrees that it will promptly take such actions as are reasonably requested by any Seller to assist in obtaining Bankruptcy Court approval of the Sale Order, including furnishing affidavits or other documents or information for filing with the Bankruptcy Court for purposes, among others, of (A) demonstrating that Buyer is a “good faith” purchaser under section 363(m) of the Bankruptcy Code and (B) establishing adequate assurance of future performance within the meaning of section 365 of the Bankruptcy Code.

  • Request for Hearing The employee must file a written request for hearing within fifteen calendar days of receipt of the Notice of Dismissal or Suspension. Filing means receipt in the office designated no later than regular close of business on the last day of the filing period. Failure to file such request in a timely manner shall be deemed a waiver of the right to a hearing and the proposed action shall be effective upon action by the Governing Board without notice or hearing except as may be required in a board meeting agenda.

  • Stop Order The Company will advise the Agent, promptly after it receives notice or obtains knowledge thereof, of the issuance or threatened issuance by the Commission of any stop order suspending the effectiveness of the Registration Statement, of the suspension of the qualification of the Shares for offering or sale in any jurisdiction, or of the initiation or threatening of any proceeding for any such purpose, and it will promptly use its commercially reasonable efforts to prevent the issuance of any stop order or to obtain its withdrawal if such a stop order should be issued.