Safety and Reliability Sample Clauses

Safety and Reliability. As set out in Section 3.2.2 of this Agreement, NCPA or the MSSAA Members, as applicable, shall operate and maintain their respective portions of NCPA’s System in accordance with applicable safety standards and Reliability Standards, WECC and NERC requirements as applicable, regulatory requirements, operating guidelines, and Good Utility Practice so as to avoid any material unplanned-for adverse impact on the CAISO Controlled Grid. As set forth in Section 3.2.1 of this Agreement, the CAISO shall operate and maintain the CAISO Controlled Grid and the operation of the CAISO Balancing Authority Area in accordance with applicable Reliability Standards pursuant to WECC and NERC requirements as applicable, regulatory requirements, operating guidelines, and Good Utility Practice so as to avoid any material unplanned-for adverse impact on NCPA’s System. Without limiting the foregoing, NCPA or its MSSAA Members, as applicable, shall operate and maintain their respective portions of NCPA’s System, during normal and System Emergency conditions, in compliance with NCPA’s Emergency Action Plan (“EAP”) and the requirements applicable to Utility Distribution Companies in CAISO Operating Procedures and standards. In the event any such CAISO Operating Procedure or standard is revised to modify the requirements applicable to Utility Distribution Companies, the Parties shall comply with such revision. SVP’s comparable obligations are separately addressed in the SVP MSS Agreement.
View SourceView Similar (2)
Safety and Reliability. Since the systems are highly complex in nature, the philosophy and criteria to be adopted shall be highly safety- and-reliability-oriented for their systematic and proper functioning. The designs of the sub-systems, components, equipments to be carried out by the Contractor shall specifically address essential safety provisions both in-built and external. Reliability is a prime factor, which has to be embedded in the process of realization of the systems. To ensure that the sub-system design, development, selection of equipment, components, material, etc are in compliance with the standard engineering practices, it is necessary to follow established design codes and standards.
View Source

Related to Safety and Reliability

  • HEALTH, SAFETY AND ENVIRONMENT In the performance of this Contract, Contractor and Operator shall conduct Petroleum Operations with due regard to health, safety and the protection of the environment (“HSE”) and the conservation of natural resources, and shall in particular:

  • Safety and Protection Where applicable, the PERFORMING PARTY shall be responsible for requiring employees, contractors, and subcontractors to maintain and supervise all necessary safety precautions and programs in connection with the Grant Activities. The PERFORMING PARTY shall take all necessary precautions to protect the health and safety of the public during performance of the Grant Activities.

  • COMPLIANCE WITH HEALTH, SAFETY, AND ENVIRONMENTAL REGULATIONS The Contractor, it’s Subcontractors, and their respective employees, shall comply fully with all applicable federal, state, and local health, safety, and environmental laws, ordinances, rules and regulations in the performance of the services, including but not limited to those promulgated by the City and by the Occupational Safety and Health Administration (OSHA). In case of conflict, the most stringent safety requirement shall govern. The Contractor shall indemnify and hold the City harmless from and against all claims, demands, suits, actions, judgments, fines, penalties and liability of every kind arising from the breach of the Contractor’s obligations under this paragraph.

  • Fraud, Waste, and Abuse Contractor understands that HHS does not tolerate any type of fraud, waste, or abuse. Violations of law, agency policies, or standards of ethical conduct will be investigated, and appropriate actions will be taken. Pursuant to Texas Government Code, Section 321.022, if the administrative head of a department or entity that is subject to audit by the state auditor has reasonable cause to believe that money received from the state by the department or entity or by a client or contractor of the department or entity may have been lost, misappropriated, or misused, or that other fraudulent or unlawful conduct has occurred in relation to the operation of the department or entity, the administrative head shall report the reason and basis for the belief to the Texas State Auditor’s Office (SAO). All employees or contractors who have reasonable cause to believe that fraud, waste, or abuse has occurred (including misconduct by any HHS employee, Grantee officer, agent, employee, or subcontractor that would constitute fraud, waste, or abuse) are required to immediately report the questioned activity to the Health and Human Services Commission's Office of Inspector General. Contractor agrees to comply with all applicable laws, rules, regulations, and System Agency policies regarding fraud, waste, and abuse including, but not limited to, HHS Circular C-027. A report to the SAO must be made through one of the following avenues: ● SAO Toll Free Hotline: 1-800-TX-AUDIT ● SAO website: ▇▇▇▇://▇▇▇.▇▇▇▇▇.▇▇▇▇▇.▇▇.▇▇/ All reports made to the OIG must be made through one of the following avenues: ● OIG Toll Free Hotline ▇-▇▇▇-▇▇▇-▇▇▇▇ ● OIG Website: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ ● Internal Affairs Email: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇.▇▇▇▇▇.▇▇.▇▇ ● OIG Hotline Email: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇.▇▇▇▇▇.▇▇.▇▇. ● OIG Mailing Address: Office of Inspector General Attn: Fraud Hotline MC 1300 P.O. Box 85200 Austin, Texas 78708-5200

  • Health and Safety Standards Contractor shall abide by all health and safety standards set forth by the State of California and/or the County of ▇▇▇▇▇▇ pursuant to the Injury and Illness Prevention Program. If applicable, Contractor must receive all health and safety information and training from County.