SAFETY ASPECT Sample Clauses

SAFETY ASPECT. Contractor shall observe all the safety and security rules and regulation of the GIPCL which are at present in force and which may come into force during the pendency of the contract. Any violation of any rules and regulations will entail immediate termination of the contract. When contractor moves his lifting tools and tackles to the plant area, required test certificates as per the Factory Act 1948 and the state factories rules has to be submitted to safety Deptt. Safety Deptt. will check the certificates and if found okay, then only materials will be allowed to enter inside the plant. Material inward gate pass will be made only after certification from Safety Deptt. Security Deptt. will inform to Safety Deptt., as & when such tools and tackles brought at the gate for making entry in the maintenance site. The contractor has to submit the list of required safety gears along with safety equipments available with him to safety Deptt. Safety Deptt will check for quantity and quality of the safety gears and then allowed permission of work. Poor quality material will not be allowed to take inside the Plant. If quantity of required safety equipments is not satisfactory, contractor will not be allowed to carry out the work using such safety gears inside the Plant for the work.
View SourceView Similar (12)
SAFETY ASPECT. Contractor shall observe all the safety and security rules and regulation of the GIPCL which are at present in force and which may come into force during the pendency of the contract. Any violation of any rules and regulations will entail immediate termination of the contract.
View SourceView Similar (4)
SAFETY ASPECT. Contractor shall observe all the safety and fire rules and regulation of the GIPCL which are at present in force and which may come into force during the pendency of the contract. Any violation of any rules and regulations will entail immediate termination of the contract. The contractor has to submit the list of required safety gears along with safety equipments available with him to safety Deptt. Safety Deptt will check for quantity and quality of the safety gears and then allowed permission of work. Poor quality material will not be allowed to take inside the Plant. If quantity of required safety equipments is not satisfactory, contractor will not be allowed to carry out the work using such safety gears inside the Plant for the work.
View Source
SAFETY ASPECT. Agency shall observe all the safety and security rules and regulation of the GIPCL which are at present in force and which may come into force during the pendency of the contract. Any violation of any rules and regulations will entail immediate termination of the contract.
View Source
SAFETY ASPECT. The primary premise that defines the safety aspect shall be that the services provided to the Customer by the Vendor under the Computer Services Outsourcing Contract cannot present any consequence or risk to the physical and logical safety of each and every one of the components involved in the provision of the same services, guaranteeing compliance with the safety criteria set forth by specific outside entities. The Vendor shall propose specific procedures to the Customer for the receipt of Customer Safety Audits, shall determine the Safety requirements of Customer applications, shall authorize actions that are requested under special circumstances outside of the specified policies or standards, shall monitor the progress of indicators, trends and Control Tables, including the request for Audits made to the Safety service provider, and shall manage responses to Official Entities and Entities representing the Customer. These actions shall be carried out jointly by the Customer and the Vendor. This Safety aspect shall also include Operational Risk Management that must establish policies and criteria intended to ensure the continuity of the service, include Risk Management in the provision of services and evaluate and propose actions based on their regulatory impact. Said Safety shall be provided to the Customer by the Vendor by means of Computer Safety Cross Support designed by the Vendor for all the services.
View Source

Related to SAFETY ASPECT

  • Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding ▇▇▇▇▇▇▇, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.

  • Safety Where an employee is prevented from working at the employee’s particular function as a result of unsafe conditions caused by the inclement weather, the employee may be transferred to other work in the employee’s classification on site, until the unsafe conditions are rectified. Where such alternative is not available and until the unsafe conditions are rectified, the employee shall remain on site. The employee shall be paid for such time without reduction of the employees’ inclement weather entitlement.

  • Safety Compliance Comply with Site safety programs, as they apply to RPR, and if required to do so by such safety programs, receive safety training specifically related to RPR’s own personal safety while at the Site.

  • Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87. 1. All employees who are required to wear safety glasses shall also be required to wear side ▇▇▇▇▇▇▇, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City. Section 2. The City agrees to pay the full cost of required prescription safety glasses, with frames not to exceed $75.00. This excludes the cost of the eye examination which will be the responsibility of the employee. The effected employees will be allowed one (1) replacement of safety glasses every two (2) years. In the event the safety glasses become lost, unserviceable, or broken on the job, the employee must present a written request for replacement to the Department Head and Human Resources Director. If the employee breaks his safety glasses while on the job, the Department shall replace the glasses at no cost to the employee. The replacement of lost glasses or glasses that are broken off the job will be at the discretion of the Department Head and Human Resources Director. If an employee has been provided safety glasses by the City, the employee shall be permitted to retain possession of the glasses after separation from the City without reimbursing the City for any costs associated with the glasses. Section 3. An employee who is required to wear prescription safety glasses must present a written request to his department head or designated representative. Section 4. The employee must obtain a current prescription and the employee is authorized the use of sick leave not to exceed two (2) hours to accomplish this examination. The employee will obtain a purchase order from the Department Head prior to ordering the safety glasses. The employee will present the purchase order to the appropriate vendor when ordering. The vendor will contact the appropriate Department Head when the glasses are ready for delivery. The Department Head will then notify the employee who will present himself at the vendor for fitting and pickup. Section 5. In the event a probationary employee has been issued safety glasses and terminates his employment with the City for any reason during the probationary period, he shall be required to reimburse the City for any expenses incurred in the purchase of safety glasses.

  • Workplace Safety The parties to this Agreement commit themselves to achieving the highest possible standards of occupational health and safety including adherence to the consultative and issue resolution processes included herein. Participation in and support for building and construction industry initiatives to improve construction industry standards in occupational health and safety will form an important part of this commitment. Observance of relevant Acts, Regulations, and Codes of Practice are the minimum level acceptable to enable employers and employees to meet their responsibilities and to work safely and follow health and safety rules in their workplace. On all sites there will be developed a site safety plan and job specific ‘job safety analysis’ to identify and manage the risks associated with work on each particular site. Such safety plan will include suitable procedures for personnel/material access, and site evacuation procedures. The Incolink Safety Handbook ‘SAFE’ (as amended) is endorsed by this Agreement as a proper guide and reference source for safety management and control of risks. 1) The parties agree that the WorkSafe Australia Guidance Notes on Material Safety Data Sheets shall be observed at all times. 2) Hearing tests: Audiometric tests should be conducted within two months of a person commencing employment, and thereafter at intervals of two years.