Sampling Plans Clause Samples

The Sampling Plans clause defines the procedures and criteria for selecting and testing samples from a larger batch or lot of goods or materials. Typically, it outlines how samples are to be chosen, the frequency of sampling, and the standards or methods used for evaluation. For example, it may specify that a certain percentage of items from each shipment will be randomly tested for quality compliance. The core function of this clause is to ensure consistent quality control and to provide a systematic approach for detecting defects or non-conformities before full acceptance or use of the goods.
Sampling Plans. The Official Agency will: (a) comply with National Residue Control Programme and where required attend and participate in relevant cross-agency meetings relating to the programme. (b) Take samples for analysis as required in accordance with food legislation and in line with the Standard Operating Procedures of the Local Authority Veterinary Service and in accordance with sampling plans developed by the Authority and Cork County Council Veterinary Food Safety Laboratory and any other laboratories as applicable.
View SourceView Similar (35)
Sampling Plans. Official Agency to organise sampling and sending of Official Control samples as per annual sampling programme Official Control Samples received by relevant labs
View SourceView Similar (11)
Sampling Plans. 7.4.1. GW shall implement and maintain In-Process Material and the Products sampling plans as required. Sampling plans shall be documented in approved manufacturing procedures and recorded in batch specific Master Processing Records.
View SourceView Similar (3)
Sampling Plans. 4.1 Samples will be selected using an Acceptable Quality Level (AQL) of 0.65%, single, normal, level II. Systems will be audited using suppliers acceptance test procedures, which have been approved by Buyer, prior to shipment. The approved supplier workmanship standards or the Buyer workmanship standards will apply for visual criteria. 4.2 Spare boards will be tested at the system level using the test procedures and workmanship standards referenced above.
View SourceView Similar (2)
Sampling Plans. The Official Agency shall agree annual national sampling plans (microbiological and chemical) with the Authority in the final quarter preceding the year to which they apply. The sampling plan will include the various food sampling programmes undertaken by the Official Agency, including EU Co-Ordinated Control Plans and National Microbiological/Chemical Surveillance Programmes. The plan will outline the numbers of samples to be taken, the parameters to be analysed and where appropriate the sampling points. The priorities for each year shall also be detailed in these sampling plans. Sampling should be carried out in accordance with the relevant legislative requirements, sampling guidelines and/or sampling protocols. Sampling shall be focused on appropriate areas in the food supply chain from production/importation to retail/catering as an aid to the determination of compliance of food and food businesses with food legislation, to provide optimal data for protection of the consumer and as part of agreed focused surveys. The timing and delivery of samples shall be agreed at local level. The Official Agency shall monitor the delivery of the sampling plan throughout the year in particular with a view to ensuring sample numbers and sample types are achieved and adjustments are made to the sampling plan where necessary. This will be discussed through the EHS-OFML and EHS-PAL sampling groups in conjunction with the Authority. The recommendations of the Authority’s Scientific Committee report on sampling and microbiological examinations undertaken by the Official Agency will be reviewed and implemented in line with the actions agreed with the Authority and the Official Agency.
View SourceView Similar (2)
Sampling Plans. GERRESHEIMER shall use established and agreed upon sampling plans. CLEARSIDE BIOMEDICAL shall provide assistance when requested by GERRESHEIMER for classifying defects.
View Source

Related to Sampling Plans

  • Sampling The Licensee agrees that the Composition is purchased as a “Work Made for Hire” whereby the clearing of any sampled materials is the responsibility of Licensee.

  • Development Plans Customer has provided Provider with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the applicable Development Period. The information contained in the Current Development Plan is, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, production, processing, treating, marketing and other activities that Customer expects to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period. Customer and Provider shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Customer shall provide (or cause to be provided) to Provider a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). (b) Each proposed Development Plan shall include information as to the following, in each case, broken out, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) forward-looking production estimates for the applicable time period covered by such Development Plan for all Customer Gas and Customer Injected NGLs (A) that Customer reasonably and in good faith believes will become owned or Controlled by Customer during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all ▇▇▇▇▇ then-existing and (II) in the aggregate, all ▇▇▇▇▇ that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well” and, such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (ii) (A) each new receipt point (including the location thereof) proposed by Customer with respect to the Dedicated Production Estimate reflected in such Development Plan (each such receipt point, a “Planned Receipt Point”), (B) each Receipt Point at which Customer expects to Tender Customer Gas or Customer Injected NGLs reflected in such Development Plan into the TGP System, and (C) the estimated portion of the Dedicated Production Estimate contained in such Development Plan that Customer expects to Tender at each such Receipt Point and Planned Receipt Point; (iii) (A) each new delivery point (including the location thereof) proposed by Customer with respect to the Dedication Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Customer expects to Nominate Customer Residue Gas or Customer NGLs produced from the Dedicated Production Estimate reflected in such Development Plan to be redelivered to Customer, and (C) the estimated volumes of Customer Residue Gas and Customer NGLs produced from the Dedication Production Estimate contained in such Development Plan that Customer expects to Nominate to each such Delivery Point; (iv) the earliest date on which each Planned Receipt Point and Planned Delivery Point included in the Development Plan is required by Customer to be placed into service, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Receipt Point or Planned Delivery Point was delivered to Provider hereunder; (v) the anticipated characteristics of the production from the ▇▇▇▇▇ and Planned ▇▇▇▇▇ reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Customer may utilize the existing and historical production information from similarly situated ▇▇▇▇▇; (vi) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Customer proposes to be a Dedicated Contract; and (vii) other information reasonably requested by Provider that is relevant to the design, construction, and operation of the TGP System, including (A) any applicable Plant Expansion or Facilities Modification proposed by Customer, (B) the relevant Receipt Point and Planned Receipt Point facilities applicable to such Development Plan, and (C) the relevant Delivery Point and Planned Delivery Point facilities applicable to such Development Plan. TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).

  • Marketing Plans Contractor and the Exchange recognize that Enrollees and other health care consumers benefit from efforts relating to outreach activities designed to increase heath awareness and encourage enrollment. The parties shall share marketing plans on an annual basis and with respect to periodic updates of material changes. The marketing plans of each of the Exchange and Contractor shall include proposed marketing approaches and channels and shall provide samples of any planned marketing materials and related collateral as well as planned, and when completed, expenses for the marketing budget. The Contractor shall include this information for both the Exchange and the outside individual market. The Exchange shall treat all marketing information provided under this Section as confidential information and the obligation of the Exchange to maintain confidentiality of this information shall survive termination or expiration of this Agreement.

  • Work Plans Tenant shall prepare and submit to Landlord for approval schematics covering the Tenant Improvements prepared in conformity with the applicable provisions of this Work Letter (the “Draft Schematic Plans”). The Draft Schematic Plans shall contain sufficient information and detail to accurately describe the proposed design to Landlord and such other information as Landlord may reasonably request. Landlord shall notify Tenant in writing within ten (10) business days after receipt of the Draft Schematic Plans whether Landlord approves or objects to the Draft Schematic Plans and of the manner, if any, in which the Draft Schematic Plans are unacceptable. Landlord’s failure to respond within such ten (10) business day period shall be deemed approval by Landlord. If Landlord reasonably objects to the Draft Schematic Plans, then Tenant shall revise the Draft Schematic Plans and cause Landlord’s objections to be remedied in the revised Draft Schematic Plans. Tenant shall then resubmit the revised Draft Schematic Plans to Landlord for approval, such approval not to be unreasonably withheld, conditioned or delayed. Landlord’s approval of or objection to revised Draft Schematic Plans and Tenant’s correction of the same shall be in accordance with this Section until Landlord has approved the Draft Schematic Plans in writing or been deemed to have approved them. The iteration of the Draft Schematic Plans that is approved or deemed approved by Landlord without objection shall be referred to herein as the “Approved Schematic Plans.”

  • Meal Plans Residents living in Residence Facility are required to purchase a University meal plan. Information regarding the meal plan options can be obtained by contacting the meal plan office at ▇▇▇-▇▇▇-▇▇▇▇.