Sampling Schedule. Generator shall engage an independent environmental consultant to conduct representative sampling of the PS or ICM to determine concentrations per the following parameters: Benzene mg/kg 1.2 Toluene mg/kg 1.4 Ethylbenzene mg/kg 1.2 Xylenes mg/kg 1.3 Modified TPH mg/kg 15 1-Methylnaphthalene mg/kg 0.201 2-Methylnaphthalene mg/kg 0.201 Acenaphthene mg/kg 0.0889 Acenaphthylene mg/kg 0.128 Acridine mg/kg 0.763 Anthracene mg/kg 0.245 Benzo(a)anthracene mg/kg 0.693 Benzo(a)pyrene mg/kg 0.763 Benzo(b)fluoranthene mg/kg 0.763 Benzo(b+j)fluoranthene mg/kg 0.763 Benzo(e)pyrene mg/kg 0.763 Benzo(g,h,i)perylene mg/kg 3.2 Benzo(k)fluoranthene mg/kg 0.763 Chrysene mg/kg 0.846 Dibenzo(a,h)anthracene mg/kg 0.135 Fluoranthracene mg/kg 1.494 Fluorene mg/kg 0.144 Indeno(1,2,3)pyrene mg/kg 0.88 Naphthalene mg/kg 0.391 Perylene mg/kg 0.763 Phenanthrene mg/kg 0.544 Pyrene mg/kg 1.398 Quinoline mg/kg 0.763 Benzo(b+j+k)fluoranthene mg/kg 4.5 Cadmium mg/kg 4.2 Chromium (total) mg/kg 160 Copper mg/kg 108 Lead mg/kg 112 Mercury mg/kg 0.7 Zinc mg/kg 271 Pursuant to analysis, and prior to delivering PS or ICM to the Facility, Generator shall submit to ▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇ copies of all historical environmental site assessment reports and a signed report issued by an accredited independent environmental consultant declaring that the subject material satisfies these thresholds. Generator shall provide to ▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇ the environmental consultant’s declaration based on a rate of 1 sample per 500 metric tonnes of PS or ICM. Further, Generator shall ensure that the independent environmental consultant submits sufficient declarations to cover current delivery quantities. Deliveries from any Originating Location of PS or ICM which is non-compliant with these conditions will be suspended. Testing for other parameters may be required based on current or historical use of the property or adjacent properties. It is expected that all testing will be representative of materials to be transported to the Facility and consist of both Fines and larger particles. It is also required that the independent environmental consultant declares that material consists of less than 10% Fines as the operational requirements of the Facility to accept material that is free of excess Fines.
Appears in 3 contracts
Sources: Disposal Agreement, Disposal Agreement, Disposal Agreement