SOUND REQUIREMENTS Sample Clauses

The SOUND REQUIREMENTS clause sets out the standards and specifications for audio quality and sound production in a project or event. It typically details the minimum technical requirements for equipment, acceptable noise levels, and any specific protocols for sound checks or monitoring during performances or recordings. By clearly defining these expectations, the clause ensures consistent audio quality and helps prevent disputes over sound issues, thereby supporting a smooth and professional production process.
SOUND REQUIREMENTS. 1. Promoter must provide front of house speaker system that is capable of reproducing 40hz-18khz at 105db clearly and consistently to all sections of the venue. Venue to provide 4 (four) professional handheld wireless microphones w/ tunable frequencies. System needs to include: • Digital crossovers (XTA, BSS, ▇▇▇▇▇▇) • Full range cabinets (▇▇▇▇▇, JBL VerTec, ▇▇▇▇▇▇, EAW, L Acoustics, Nexo, EV XLC) • Aux/Matrix fed Subwoofers (▇▇▇▇▇, JBL Vertec, ▇▇▇▇▇▇, EAW, L Acoustics, Nexo, EV) • Aux/Matrix fed Balcony, under balcony, and lip fills. • Balanced XLR loom to connect to our console. 2. Tow (2) independently controlled speakers for side fill purposes may be needed. 3. The Venue should block the appropriate seats directly in front of the sound mixing console table from sale in this area. As soon as the mixing console is set, the Company Manager will alert the Promoter of any seats which can be released for sale. 4. There needs to be a backstage paging and monitoring, able to handle a paging mic and program feed.
View SourceView Similar (2)
SOUND REQUIREMENTS. 1. Promoter must provide front of house speaker system that is capable of reproducing 40hz-18khz at 105db clearly and consistently to all sections of the venue. Venue to provide 4 (two) professional handheld wireless microphones w/ tunable frequencies. System needs to include: • Digital crossovers (XTA, BSS, ▇▇▇▇▇▇) • Full range cabinets (▇▇▇▇▇, JBL VerTec, ▇▇▇▇▇▇, EAW, L Acoustics, Nexo, EV XLC) • Aux/Matrix fed Subwoofers (▇▇▇▇▇, JBL Vertec, ▇▇▇▇▇▇, EAW, L Acoustics, Nexo, EV) • Aux/Matrix fed Balcony, under balcony, and lip fills. • 4 wireless Microphone 2. Two (2) independently controlled speakers for side fill purposes may be needed. 3. The Venue should block the appropriate seats directly in front of the sound mixing console table from sale in this area. As soon as the mixing console is set, the Company Manager will alert the Promoter of any seats which can be released for sale. 4. There needs to be a backstage paging and monitoring, able to handle a paging mic and program feed. 5. Clear Com: Nine (9) Clear-Com stations will be needed as follows • 2- Spotlight operators • 1-Down Stage Left (Wireless if available) • 1-Down Stage Right (Wireless if available) • 1-Sound Op (FOH mixing position) • 1-Light board Op (FOH mixing position) • 1-Stage Manager (FOH mixing position) • 1-House light controls – TBD • Fly Rail • ALL Clear Com on SAME channel
View Source
SOUND REQUIREMENTS. Please note that the sound is of primary importance to the performance. As a result every effort must be made to provide suitable equipment and staff to achieve the best results. Purchaser to provide established brand­name professional quality sound equipment and FOH and Monitor engineers. *See stage plot for further notes.
View Source
SOUND REQUIREMENTS. A. Sound system should be ready to go when band arrives, with all lines plugged in and already tested according to the latest stageplot, sent or faxed to you by the ARTISTS ROAD MANAGER ▇▇▇▇ ▇▇▇▇▇▇; cell phone ▇▇▇-▇▇▇-▇▇▇▇. B. A sound check is mandatory prior to any performance and requested on the day of performance. C. Stage Size: 32' X 24' minimum. D. HOUSE SOUND - Professional quality sound equipment is mandatory for all shows. 1. Mixing board - twenty-four (24) input channels, four (4) auxiliary sends, four (4) sub-masters, Yamaha, Soundcraft, Mackie, Crest Midas, or ▇▇▇▇▇ & ▇▇▇▇▇, recommended. 2. Three (3) bands E.Q. per channel. Thirty-one (31) band graphic E.Q. per side if stereo or per matrix. 3. Three (3) way powered system (lows - 18" or 15"; mids - 12" or 10"; highs - 2" horn loaded). 4. At eight (8) ohms - 500 ▇▇▇▇▇ low, 400 ▇▇▇▇▇ mid, 150 ▇▇▇▇▇ high. 5. Two (2) low bins, two (2) mid arrays, two (2) high clusters per five hundred (500) people. 6. Five (5) direct boxes (with ground switches). 7. Fifteen (15) microphone tri pod boom stands. 8. Three (3) SM 58's, two (2) amp mic, five (5) condenser mic, three (3) tommies, one (1) kick mic, one (1) snare mic. Cables and spares included. 9. One hundred (100) foot snake and splitter. 10. Six (6) dbx compressors / gates. 11. Three (3) Quality Reverbs, one (1) delay. 12. CD player. E. MONITOR SOUND 1. Twenty-four (24) channel input, seven (7) mixes per channel. 2. Three band E.Q. per channel. 3. Eight (8) ▇▇-▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇, ▇" - ▇" ▇▇▇▇ high; 15" low. 4. Thirty-one (31) band E.Q. and active crossover per mix. 5. An experienced monitor engineer must be provided. 6. Recommended sound companies: Performance Audio, Salt Lake City, UT; QuickBeam, Albuquerque, NM.; Atlantis Audio, Phoenix, AZ; AVW Systems Dallas, Austin, San Antonio, Dallas Backup, Dallas, TX; Tumbleweed, Amarillo, TX; ▇▇▇▇▇▇▇▇ Audio, Oklahoma City; ▇▇▇▇▇▇ Sound, Denver; CO; Audio Analysts, Colorado Springs, CO; ▇▇▇▇▇▇ Audio, Boulder, CO; Star Sound Audio, Reno; Wolfco Productions, Taos, NM. ALL SOUND REQUIREMENTS MUST BE APPROVED BY ▇▇▇▇▇▇▇ ▇▇▇▇: cell 214-725- 2115.
View Source
SOUND REQUIREMENTS. PURCHASER agrees to provide ARTIST, at PURCHASER'S sole expense, with a first class, high quality, low distortion stereo sound system from a major sound company as directed and approved by ARTIST or his engineer. This will be a 4-way actively crossed-over system, with a frequency response of 40HZ to 20KHZ. The sound system shall have a dynamic range (at the rear of venue) 110-DBA average. The sound system should have the minimum sound requirements. 1. Master Output Stereo System: a) Appropriate processing to control speaker system3. Main Speaker system: (Note: no less than 4-way active system) b) Line array plus subs: V-Dosc, D&B Audiotechnik, ▇▇▇▇▇ M3D, ▇▇▇▇▇▇▇▇ MLA5, ▇▇▇▇▇▇▇ Y18, EAW KF760, JBL Vertec c) Main speaker placement will be determined by ARTIST'S engineer or production manager d) Mixing console and lighting console are to be placed (50' to 75') out from apron, center stage. ARTIST’S engineer will determine exact placement.
View Source
SOUND REQUIREMENTS. PURCHASER understands and agrees that to maintain the high standards of ARTIST’S sound reproductions, it is necessary that “state of the art” equipment be used for every ▇▇▇▇▇ ▇▇▇▇▇▇ PERFORMANCE. PURCHASER agrees to provide at PURCHASER’S sole expense said “state of the art” equipment for PERFORMANCE. PURCHASER may obtain a list of preferred sound contractors and acceptable equipment from ARTIST’S management. PURCHASER will ensure that the sound system is set up and operable a minimum of six (6) hours prior to the start of the performance. It is also understood and agreed that Artist may check sound during said period of six (6) hours prior to start of Performance. Load-in and sound check times are to be set by Artist’s production manager. PURCHASER will provide two (2) technicians familiar with the sound system from load-in until the end of the performance. These technicians will have the sound system in working order by Artist’s load-in time and will maintain system in working order throughout the performance. PURCHASER will ensure that the following are provided for ARTIST for the PERFORMANCE.
View Source
SOUND REQUIREMENTS. PURCHASER shall provide at his sole expense, a high quality, state-of-the-art sound system. System shall be capable of producing an even 100 spl at 20hz to 20Khz frequency responses without distortion in ALL audience areas in the performance venue. Sound company to provide adequate microphone cords, splitter, sub-snakes, and patch cables to outfit systems requirements and input needs as per attached input list. All microphone and DI requirements are indicated on the input list. You must consult with ARTIST’s production manager as it regards microphones—and any other desired modifications to tech rider. 56 Mic In 16 Out On Stage Box Top high quality stereo line array + sub {flown if possible} PA system to cover all audience seats and to produce 115 db Mini Line Array - D&B Q1\EAW KF 730\▇▇▇▇▇ Spektrix Sub System - D&B B2\ EAW SB 1000\▇▇▇▇▇ Spektrix Sub Front Fill - 3x2 Way Per Side -D&B Q7\EAW JF 260\Apoogi E5 ▇▇▇▇▇ UPA 1 All Outs will run from XTA 226 with WLS system tone control with Pc Leptop Amps, as per speaker requirements (LAB GRUPEN, CREST, CROWN) Three (3) Shure PSM 600 Wired In Ear Two (2) Shure e2 ear plug Eight (8) monitor wedges, Bi-Amped single 15" with 2" drivers (CLAIR 12AM, ▇▇▇▇▇, EAW) Eight (8) Crossovers/processors maximum (per monitor speaker requirements) Eight (8) Amp sets – should be minimum 500 ▇▇▇▇▇ per wedge (LAB GRUPEN, CREST, CROWN) Splitter snake / 56 channels. (Transformer isolated with ground lifts preferred) Monitors are never mixed from the house console.
View Source
SOUND REQUIREMENTS. Minimum 40-input, 4 submaster console with channel inserts: 4 band parametric EQ, 8 aux sends. Preference: Yamaha CL 5, M7CL.
View Source
SOUND REQUIREMENTS. A. Sound system should be ready to go when trio arrives, with all lines plugged in and already tested according to the latest stageplot, attached, sent or faxed to you by the ARTISTS ROAD MANAGER. B. A sound check is mandatory prior to any performance and requested on the day of performance. C. Stage Size: 12' X 24' minimum. D. HOUSE SOUND - Professional quality sound equipment is mandatory for all shows. 1. Mixing board - twenty-four (24) input channels. 2. Five (5) direct boxes (with ground switches). 3. Five (5) microphone tri pod boom stands. 4. Three (3) SM 58's, two (2) amp mic, five (5) condenser mic, three (3) tommies, one (1) kick mic. Cables and spares included. 5. One hundred (100) foot snake and splitter. 6. Three (3) Quality Reverbs, one (1) delay. 7. CD player. E. MONITOR SOUND 1. Twenty-four (24) channel input, five (5) mixes per channel. 2. Three band E.Q. per channel. 3. An experienced monitor engineer must be provided. 4. ALL SOUND REQUIREMENTS MUST BE APPROVED BY road manager.
View Source

Related to SOUND REQUIREMENTS

  • System Requirements Apple Software is supported only on Apple-branded hardware that meets specified system requirements as indicated by Apple.

  • Export Requirements The Program, Documentation and all related technical information or materials are subject to export controls and U.S. Government export regulations. You will comply strictly with all legal requirements established under these controls and will not, in connection with its limited evaluation rights hereunder, export, re-export, divert, transfer or disclose, directly or indirectly the Program, Documentation and any related technical information or materials without the prior approval of the U.S.

  • BOND REQUIREMENTS The Contractor hereby agrees to comply with the State’s bonding requirements as identified in the Instructions to Bidders which are included in the RFP and are attached and incorporated into the Contract Documents.

  • DBE Requirements A. Notice is hereby given to the CONSULTANT and any SUB-CONSULTANT, and both agree, that failure to carry out the requirements set forth in 49 CFR Sec. 26.13(b) shall constitute a breach of this Contract and, after notification and failure to promptly cure such breach, may result in termination of this Contract or such remedy as INDOT deems appropriate. The referenced section requires the following assurance to be included in all subsequent contracts between the CONSULTANT and any SUB-CONSULTANT: The CONSULTANT, sub recipient or SUB-CONSULTANT shall not discriminate on the basis of race, color, national origin, or sex in the performance of this Contract. The CONSULTANT shall carry out applicable requirements of 49 CFR Part 26 in the award and administration of DOT-assisted contracts. Failure by the CONSULTANT to carry out these requirements is a material breach of this Contract, which may result in the termination of this Contract or such other remedy, as INDOT, as the recipient, deems appropriate. B. The CONSULTANT shall make good faith efforts to achieve the DBE percentage goal that may be included as part of this Contract with the approved DBE SUB-CONSULTANTS identified on its Affirmative Action Certification submitted with its Letter of Interest, or with approved amendments. Any changes to a DBE firm listed in the Affirmative Action Certification must be requested in writing and receive prior approval by the LPA and INDOT’s Economic Opportunity Division Director. After this Contract is completed and if a DBE SUB- CONSULTANT has performed services thereon, the CONSULTANT must complete, and return, a Disadvantaged Business Enterprise Utilization Affidavit (“DBE-3 Form”) to INDOT’s Economic Opportunity Division Director. The DBE-3 Form requires certification by the CONSULTANT AND DBE SUB-CONSULTANT that the committed contract amounts have been paid and received.

  • Rule 144 Requirements After the earliest of (i) the closing of the sale of securities of the Company pursuant to a Registration Statement, (ii) the registration by the Company of a class of securities under Section 12 of the Exchange Act, or (iii) the issuance by the Company of an offering circular pursuant to Regulation A under the Securities Act, the Company agrees to: (a) make and keep current public information about the Company available, as those terms are understood and defined in Rule 144; (b) use its best efforts to file with the Commission in a timely manner all reports and other documents required of the Company under the Securities Act and the Exchange Act (at any time after it has become subject to such reporting requirements); and (c) furnish to any holder of Registrable Shares upon request (i) a written statement by the Company as to its compliance with the reporting requirements of Rule 144 and of the Securities Act and the Exchange Act (at any time after it has become subject to such reporting requirements), (ii) a copy of the most recent annual or quarterly report of the Company, and (iii) such other reports and documents of the Company as such holder may reasonably request to avail itself of any similar rule or regulation of the Commission allowing it to sell any such securities without registration.