Common use of Source Inspections Clause in Contracts

Source Inspections. Upon prior written notice to Manufacturer, Com21 or its authorized representative(s) may conduct source inspections of the Products at Manufacturer's facility at which Products are being manufactured, during Manufacturer's normal business hours. Such inspections shall be based upon IPC-A-610 Class 2; MIL STD. 105, .65 AQL, Normal Inspection, Level II; and such other standards as Com21 may reasonably elect. (Note: Com21 may require a more stringent standard (IPC-A-610 Class 3) for specific products. In that event, Com21 and Manufacturer will discuss and agree on additional charges if any. For those products, inspections shall be based on IPC-A-610 Class 2.) The Parties shall mutually agree upon the timing of such inspections, which shall be conducted in a manner that does not interfere with Manufacturer's operations. Manufacturer shall provide sufficient facilities for persons conducting such source inspections. If any Product fails the test procedure set forth in the Product Performance Specifications, Com21 may reject the entire lot of any such Products, and Manufacturer shall promptly take all steps necessary to correct such failures. Immediately upon any rejection resulting from a source inspection, Manufacturer shall identify the cause of the failure and shall promptly take all reasonable steps to correct any such failure.

Source Inspections. Upon prior written notice to Manufacturer, Com21 or its authorized representative(s) may conduct source inspections of the Products at Manufacturer's facility at which Products are being manufactured, during Manufacturer's normal business hours. Such inspections shall be based upon IPC-A-610 Class 2; MIL STD. 105, .65 AQL, Normal Inspection, Level II; and such other standards as Com21 may reasonably elect. (Note: Com21 may require a more stringent standard (IPC-A-610 Class 3) for specific products. In that event, Com21 and Manufacturer will discuss and agree on additional charges if any. For those products, inspections shall be based on IPC-A-610 Class 23.) The Parties shall mutually agree upon the timing of such inspections, which shall be conducted in a manner that does not interfere with Manufacturer's operations. Manufacturer shall provide sufficient facilities for persons conducting such source inspections. If any Product fails the test procedure set forth in the Product Performance SpecificationsManufacturing Standards, Com21 may reject the entire lot of any such Products, and Manufacturer shall promptly take all steps necessary to correct such failures. Immediately upon any rejection resulting from a source inspection, Manufacturer shall identify the cause of the failure and shall promptly take all reasonable steps to correct any such failurefailure as described in the Manufacturing Specifications.