Common use of SPECIFICATION AND QUALITY Clause in Contracts

SPECIFICATION AND QUALITY. 3.1 Pine and Hardwood Roundwood sold hereunder shall be of a quality which is satisfactory for use in the ▇▇▇▇▇ of the type being operated by Domtar and shall meet the roundwood log specifications set forth in Exhibit “A”. 3.2 Payment will be made in accordance with Exhibit “B” and only for the actual quantity of Pine and Hardwood Roundwood that meet the specifications set forth in Exhibit “A”. No payment will be made for Pine and Hardwood Roundwood which, for any reason, fail to meet these specifications. 3.3 Domtar shall make statistically valid measurements and tests as it, in its absolute discretion, deems necessary to determine the quantity and quality of Pine and Hardwood Roundwood supplied by Weyerhaeuser. Domtar shall communicate the results of the measurements and tests in a timely manner. Weyerhaeuser shall accept and be bound by such measurements and tests, and the results thereof, subject always to Weyerhaeuser’s right to verify said measurements, tests and results upon reasonable prior notice and during regular business hours. Any correction required to be made by a party to an amount paid for a particular shipment of Pine and Hardwood Roundwood as a result of this Section 3.3 shall not, in any case, be made to an amount paid for a shipment of Pine and Hardwood Roundwood delivered more than 90 days prior to such measurement and testing. 3.4 In the event that an individual trailer load or partial trailer load of Pine and Hardwood Roundwood fails to conform to the specifications set forth in Exhibit “A”, Domtar shall have the right to refuse acceptance of any such trailer load or partial load upon delivery at scales. Domtar shall have the right to refuse further deliveries of Pine and Hardwood Roundwood until such time Domtar is satisfied that satisfactory steps have been taken by Weyerhaeuser to rectify the cause of the failure to meet the Pine and Hardwood Roundwood specifications set forth in Exhibit “A”.

SPECIFICATION AND QUALITY. 3.1 Pine and Hardwood Roundwood In-▇▇▇▇▇ chips sold hereunder shall be of a quality which is satisfactory for use in the ▇▇▇▇▇ a kraft pulp mill of the type being operated by Domtar and shall meet the roundwood log pine chip specifications set forth in Exhibit “A”. 3.2 Payment will be made in accordance with Exhibit “B” and only for the actual quantity of Pine and Hardwood Roundwood chips that meet the specifications set forth in Exhibit “A”. No payment will be made for Pine and Hardwood Roundwood chips which, for any reason, fail to meet these specifications. 3.3 Domtar shall make statistically valid measurements and tests as it, in its absolute discretion, deems necessary to determine the quantity and quality of Pine and Hardwood Roundwood in-▇▇▇▇▇ chips supplied by Weyerhaeuser. Domtar shall communicate the results of the measurements and tests in a timely manner. Weyerhaeuser shall accept and be bound by such measurements and tests, and the results thereof, subject always to Weyerhaeuser’s right to verify said measurements, tests and results upon reasonable prior notice and during regular business hours. Any correction required to be made by a party to an amount paid for a particular shipment of Pine and Hardwood Roundwood chips as a result of this Section 3.3 shall not, in any case, be made to an amount paid for a shipment of Pine and Hardwood Roundwood chips delivered more than 90 days prior to such measurement and testing. 3.4 In the event recognition that an individual trailer load or partial trailer load of Pine and Hardwood Roundwood chips that fails to conform to the specifications set forth in Exhibit “A” may cause Domtar unacceptable handling, production or quality problems, Domtar shall reject such loads not meeting the specifications in any manner Domtar chooses without holding such chips for Weyerhaeuser’s further inspection. Unless otherwise agreed, Domtar shall not pay Weyerhaeuser for any chips not meeting specifications. In the event a trailer load or partial trailer load of chips is found not to meet the chip specifications set forth in Exhibit “A”, Domtar shall have the right to refuse acceptance of any such trailer load or partial load upon delivery at scales. Domtar shall have the right to refuse further deliveries of Pine and Hardwood Roundwood chips until such time Domtar is satisfied that satisfactory steps have been taken by Weyerhaeuser to rectify the cause of the failure to meet the Pine and Hardwood Roundwood chip specifications set forth in under the terms of Exhibit “A”.

SPECIFICATION AND QUALITY. 3.1 Pine and Hardwood Roundwood sold hereunder shall be of a quality which is satisfactory for use in the ▇▇▇▇▇ a kraft pulp mill of the type being operated by Domtar and shall meet the roundwood log specifications set forth in Exhibit “A”. 3.2 Payment will be made in accordance with Exhibit “B” and only for the actual quantity of Pine and Hardwood Roundwood that meet the specifications set forth in Exhibit “A”. No payment will be made for Pine and Hardwood Roundwood which, for any reason, fail to meet these specifications. 3.3 Domtar shall make statistically valid measurements and tests as it, in its absolute discretion, deems necessary to determine the quantity and quality of Pine and Hardwood Roundwood supplied by Weyerhaeuser. Domtar shall communicate the results of the measurements and tests in a timely manner. Weyerhaeuser shall accept and be bound by such measurements and tests, and the results thereof, subject always to Weyerhaeuser’s right to verify said measurements, tests and results upon reasonable prior notice and during regular business hours. Any correction required to be made by a party to an amount paid for a particular shipment of Pine and Hardwood Roundwood as a result of this Section 3.3 shall not, in any case, be made to an amount paid for a shipment of Pine and Hardwood Roundwood delivered more than 90 days prior to such measurement and testing. 3.4 In the event that an individual trailer load or partial trailer load of Pine and Hardwood Roundwood fails to conform to the specifications set forth in Exhibit “A”, Domtar shall have the right to refuse acceptance of any such trailer load or partial load upon delivery at scales. Domtar shall have the right to refuse further deliveries of Pine and Hardwood Roundwood until such time Domtar is satisfied that satisfactory steps have been taken by Weyerhaeuser to rectify the cause of the failure to meet the Pine and Hardwood Roundwood specifications set forth in Exhibit “A”.

SPECIFICATION AND QUALITY. 3.1 Pine and Hardwood Roundwood Wood hog fuel sold hereunder shall be of a quality which is satisfactory for use in the ▇▇▇▇▇ boilers of the type being operated by Domtar and shall meet the roundwood log hog fuel specifications set forth in Exhibit “A”. 3.2 Payment Weyerhaeuser will make statistically valid measurements and tests (sample audit) to validate that hog fuel deliveries meet specifications and report findings to Domtar on a monthly basis. If the sample audit determines the hog fuel to be made in accordance with Exhibit “B” out of specification, Weyerhaeuser will report the action steps and only timelines expected to correct the issue. Domtar will periodically review Weyerhaeuser’s sample audit process for the actual quantity of Pine reliability and Hardwood Roundwood that meet the specifications set forth in Exhibit “A”provide Weyerhaeuser recommendations for improvement. No payment Domtar will be made for Pine and Hardwood Roundwood which, for any reason, fail to meet these specifications. 3.3 Domtar shall make statistically valid measurements and tests as it, in its absolute discretion, deems necessary to determine the quantity and quality of Pine and Hardwood Roundwood wood hog fuel supplied by Weyerhaeuser. Domtar shall communicate the results of the measurements and tests in a timely manner. Weyerhaeuser shall accept and be bound by such measurements and tests, and the results thereof, subject always to Weyerhaeuser’s right to verify said measurements, tests and results upon reasonable prior notice and during regular business hours. Any correction required to be made by a party to an amount paid for a particular shipment of Pine and Hardwood Roundwood as a result of this Section 3.3 shall not, in any case, be made to an amount paid for a shipment of Pine and Hardwood Roundwood delivered more than 90 days prior to such measurement and testing. 3.4 3.3 In the event recognition that an individual trailer load or partial trailer load of Pine and Hardwood Roundwood hog fuel that fails to conform to the specifications set forth in Exhibit “A” may cause Domtar unacceptable handling, production or quality problems, Domtar may reject such loads not meeting the specifications in any manner Domtar chooses without holding such hog fuel for Weyerhaeuser’s further inspection. Unless otherwise agreed, Domtar shall not pay Weyerhaeuser for any hog fuel not meeting specifications under the terms of Exhibit “A”. In the event a trailer load or partial trailer load of hog fuel is found not to meet the hog fuel specifications set forth in Exhibit “A”, Domtar shall have the right to refuse acceptance of any such trailer load or partial load upon delivery at scales. Domtar shall have the right to refuse further deliveries of Pine and Hardwood Roundwood hog fuel until such time Domtar is satisfied that satisfactory steps have been taken by Weyerhaeuser to rectify the cause of the failure to meet the Pine and Hardwood Roundwood specifications set forth in Exhibit “A”hog fuel specifications.

SPECIFICATION AND QUALITY. 3.1 Pine and Hardwood Roundwood Wood chips sold hereunder shall be of a quality which is satisfactory for use in the ▇▇▇▇▇ a kraft pulp mill of the type being operated by Domtar and shall meet the roundwood log specifications set forth in Exhibit “A”. 3.2 Payment will be made in accordance with Exhibit “B” and only for the actual quantity of Pine and Hardwood Roundwood that meet the wood chip specifications set forth in Exhibit “A”. No payment Future changes to the chip specifications in Exhibit “A” will be made for Pine and Hardwood Roundwood which, for any reason, fail to meet these specificationsagreed upon by both parties before implementation. 3.3 3.2 Weyerhaeuser will make statistically valid measurements and tests (sample audit) to validate that chip deliveries meet specifications and report findings to Domtar shall on a monthly basis. If the sample audit determines the chips to be out of specification, Weyerhaeuser will report the action steps and timelines expected to correct the issue. Domtar will periodically review Weyerhaeuser’s sample audit process for reliability and provide Weyerhaeuser recommendations for improvement. Domtar will make statistically valid measurements and tests as it, in its absolute discretion, deems necessary to determine the quantity and quality of Pine and Hardwood Roundwood wood chips supplied by Weyerhaeuser. Domtar shall will communicate the results of the measurements and tests in a timely manner. Weyerhaeuser shall accept and be bound by such measurements and tests, and the results thereof, subject always to Weyerhaeuser’s right to verify said measurements, tests and results upon reasonable prior notice and during regular business hours. Any correction required to be made by a party to an amount paid for a particular shipment of Pine and Hardwood Roundwood as a result of this Section 3.3 shall not, in any case, be made to an amount paid for a shipment of Pine and Hardwood Roundwood delivered more than 90 days prior to such measurement and testing. 3.4 3.3 In the event recognition that an individual trailer load or partial trailer load of Pine and Hardwood Roundwood chips that fails to conform to the specifications set forth in Exhibit “A” may cause Domtar unacceptable handling, production or quality problems, Domtar may reject such loads not meeting the specifications in any manner Domtar chooses without holding such chips for Weyerhaeuser’s further inspection. Unless otherwise agreed, Domtar shall not pay Weyerhaeuser for any chips not meeting specifications under the terms of Exhibit “A”. In the event a trailer load or partial trailer load of chips is found not to meet the chip specifications set forth in Exhibit “A”, Domtar shall have the right to refuse acceptance of any such trailer load or partial load upon delivery at scales. Domtar shall have the right to refuse further deliveries of Pine and Hardwood Roundwood chips until such time Domtar is satisfied that satisfactory steps have been taken by Weyerhaeuser to rectify the cause of the failure to meet the Pine and Hardwood Roundwood specifications set forth in Exhibit “A”chip specifications.