Specifications Quality Sample Clauses

The "Specifications; Quality" clause defines the standards and requirements that goods or services must meet under a contract. It typically outlines the technical specifications, performance criteria, and quality benchmarks that the supplier or contractor is obligated to achieve, often referencing detailed documents or industry standards. This clause ensures that deliverables conform to agreed-upon expectations, reducing the risk of disputes over quality and providing a clear basis for inspection, acceptance, or rejection of goods or services.
Specifications Quality. (a) Corn oil Specifications. Producer covenants that it shall produce corn oil that, upon delivery to RPMG at the Ethanol Facility, meets the respective specifications (“Specifications”) set forth in Exhibit B and such other specifications that may be, from time-to-time, promulgated by the industry for corn oil. RPMG shall have the right to test each shipment of corn oil to ascertain that the Specifications are being met. If the corn oil provided by Producer to RPMG is shown, by independent testing or analysis of a representative sample or samples taken consistent with industry standards, to not meet the Specifications through no fault of RPMG or any third party engaged by RPMG, then RPMG may, in its sole discretion, (i) reject such corn oil and require Producer to promptly replace such non-conforming corn oil with corn oil that complies with the Specifications, or (ii) accept such corn oil for marketing and, if necessary, adjust the price to reflect the inferior quality, as provided in Exhibit A. Payment and acceptance of delivery by RPMG shall not waive RPMG’s rights if corn oil does not comply with the terms of this Agreement, including the Specifications.
View SourceView Similar (7)
Specifications Quality. Seller shall provide Products meeting the ---------------------- specifications set forth in Schedule 1 hereto. ----------
View SourceView Similar (3)
Specifications Quality. 3.12.1. Company shall cause the Product Manufacturer to Manufacture the Products in strict conformity with the Specifications. Further, Company represents that, as of the Effective Date and during the Term, the Product Manufacturer holds the required manufacturing authorization pursuant to Applicable Laws for the Manufacture of the Products. 3.12.2. Within [***], USWM and Company (and/or the Product Manufacturer, as applicable) shall enter into a mutually agreeable Quality Agreement relating to the Products. Company shall maintain a current Quality Agreement and quality control system compliant with the Regulatory Authority for the Products to be delivered hereunder. Such a system shall include [***]. Each Batch of Product to be supplied to USWM hereunder shall be subject to a quality control inspection by Company in accordance with Company’s then current quality assurance standards and the approved Regulatory Filings. In the event a conflict arises between the Quality Agreement and this Agreement, the term contained in the Quality Agreement shall control with respect to quality-related matters relating to the Products. 3.12.3. [***] modifications, changes, additions or deletions to the (1) [***]; (2) [***]; (3) [***]; (4) [***]; (5) [***]; (6) [***]; (7) [***]; or (8) [***], which Company intends to carry out (hereinafter, “Product Changes”), must be evaluated and documented by [***]. Prior to implementation of any material Product Change, and in any event, within [***] from [***], Company agrees to provide reasonable notice to USWM in writing of such change and Company shall consider in good faith any input timely provided by USWM regarding any Product Changes. Reasonable notice applies in (1) circumstances in which [***], and (2) circumstances where [***]. In such circumstances, following reasonable notice, USWM shall be informed of [***]. If appropriate and upon considering in good faith timely input provided by USWM, Company shall [***]. 3.12.4. Company is responsible for storing and maintaining retention samples of each Batch of Product produced for USWM for [***] in accordance with Good Manufacturing Practices and the terms of the Quality Agreement. Company will take measures to ensure that the quantity of retention samples shall be of sufficient quantity [***]. 3.12.5. Company shall be responsible for the testing and generation of stability data for the Products in accordance with the cGMP and ICH guidelines. 3.12.6. Company shall be responsible fo...
View SourceView Similar (2)
Specifications Quality a. Company shall label and package Product in accordance with the provisions of all Laws, and Purchase Specifications, as applicable. b. Each Product delivered pursuant to this Agreement shall comply with the Purchase Specifications. A Certificate of Analysis showing the OBI Purchase Order number, size and description, lot or batch number, and the specifics of the analysis of all Product properties requested by OBI, will be provided by Company with each lot of Product. c. Subject to Applicable Laws, neither the Purchase Specifications, nor any change in any Product that may alter its properties, impurities, or any other characteristic of the Products, may be changed without OBI prior written consent. Company shall not unreasonably withhold its agreement to any change in the Purchase Specifications requested by OBI. Company shall not make any substitutions for Products ordered without the prior written approval of OBI. d. Company shall ensure that quality assurance tests agreed by the Parties from time to time are adopted. e. Company shall retain samples of each batch of the Products for a period not less than five (5) years.
View Source
Specifications Quality. (a) All products to be manufactured pursuant to this Agreement shall be identified in a unique purchase order issued by the Purchaser to the Manufacturer defining all requirements of the particular build (the “Products”). These Products shall be manufactured in accordance with Purchaser’s specifications and drawings, which have been provided to Manufacturer. All Products built by Manufacturer for Purchaser are subject to the terms and conditions of this Agreement. (b) CM Solutions agrees to supply product built to RoHS standards, at a mutually agreed to time and price. (c) All work performed by Manufacturer shall be performed in a skillful and professional manner and shall be consistent with best commercial standards of the industry, including but not limited to the following: (1) ISO 9002
View Source
Specifications Quality 
View SourceView Similar (8)

Related to Specifications Quality

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Technical Specifications The purpose of the Technical Specifications (TS), is to define the technical characteristics of the Goods and Related Services required by the Procuring Entity. The Procuring Entity shall prepare the detailed TS consider that:

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • Specifications Where applicable, specifications for Goods and/or Services are detailed in this Contract and the Purchase Order. Unless otherwise specified in the Purchase Order, all Goods and/or Services provided shall be new and unused of the latest model or design.

  • Specifications and Standards a) All articles supplied shall strictly conform to the specifications, trademark laid down in the bidding document and wherever articles have been required according to ISI/ ISO/ other applicable specifications/ certifications/ standards, those articles should conform strictly to those specifications/ certifications/ standards. The supply shall be of best quality and description. The decision of the competent authority/ purchase committee whether the articles supplied conforms to the specifications shall be final and binding on the supplier/ selected bidder.