Common use of SS7 Network Interconnection Clause in Contracts

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone local signaling transfer point switches or Pilgrim Telephone local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone or other third-party switching systems with A-link access to the BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Advantage Group local signaling transfer point switches or Pilgrim Telephone Advantage Group local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Advantage Group local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Advantage Group or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Advantage Group local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Advantage Group local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone SC Net local signaling transfer point switches or Pilgrim Telephone SC Net local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone SC Net local or tandem switching systems, and AMENDMENT EXHIBIT 1 Attachment 2 Page 58 other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone SC Net or other third-third- party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone SC Net local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone SC Net local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Symtelco local signaling transfer point switches or Pilgrim Telephone Symtelco local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Symtelco local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Symtelco or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Symtelco local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Symtelco local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 6.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone CBX One-Stop local signaling transfer point switches or Pilgrim Telephone CBX One-Stop local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone CBX One-Stop local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 6.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone CBX One-Stop or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 6.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone CBX One-Stop local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone CBX One-Stop local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 6.4 SS7 Network Interconnection shall provide: 10.7.4.1 6.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 6.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 6.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4T1.111. 10.7.5 6.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone MTS Communications local signaling transfer point switches or Pilgrim Telephone MTS Communications local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone MTS Communications local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone MTS Communications or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone MTS Communications local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone MTS Communications local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone ▇▇▇.▇▇▇ local signaling transfer point switches or Pilgrim Telephone ▇▇▇.▇▇▇ local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone ▇▇▇.▇▇▇ local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone ▇▇▇.▇▇▇ or other third-party switching systems with A-link access to the BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone ▇▇▇.▇▇▇ local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone ▇▇▇.▇▇▇ local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone AmeriMex local signaling transfer point switches or Pilgrim Telephone AmeriMex local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone AmeriMex local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone AmeriMex or other third-party switching systems with A-link access to the BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone AmeriMex local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone AmeriMex local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Lightning Communications local signaling transfer point switches or Pilgrim Telephone Lightning Communications local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Lightning Communications local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Lightning Communications or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Lightning Communications local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Lightning Communications local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Nex-Phon local signaling transfer point switches or Pilgrim Telephone Nex-Phon local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Nex-Phon local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Nex-Phon or other third-party switching systems with A-link access to the BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Nex-Phon local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Nex-Phon local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone e-Tel local signaling transfer point switches or Pilgrim Telephone e-Tel local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone e-Tel local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone e-Tel or other third-third- party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone e-Tel local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone e-Tel local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone WorldxChange local signaling transfer point switches or Pilgrim Telephone WorldxChange local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone WorldxChange local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone WorldxChange or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone WorldxChange local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone WorldxChange local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone CBX One-Stop local signaling transfer point switches or Pilgrim Telephone CBX One-Stop local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone CBX One-Stop local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone CBX One-Stop or other third-party switching systems with A-link access to the BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone CBX One-Stop local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone CBX One-Stop local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone DPI Teleconnect local signaling transfer point switches or Pilgrim Telephone DPI Teleconnect local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone DPI Teleconnect local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone DPI Teleconnect or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone DPI Teleconnect local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone DPI Teleconnect local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ local signaling transfer point switches or Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone ▇▇▇▇▇▇▇▇.▇▇▇ local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Deland Actel local signaling transfer point switches or Pilgrim Telephone Deland Actel local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Deland Actel local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Deland Actel or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Deland Actel local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Deland Actel local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 9.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone GulfPines local signaling transfer point switches or Pilgrim Telephone GulfPines local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone GulfPines local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 9.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone GulfPines or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 9.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone an GulfPines local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone GulfPines local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 9.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 9.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 9.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 9.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 9.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT Global Title Translation (GTT) and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of Pilgrim Telephone Micro-Comm local signaling transfer point switches or Pilgrim Telephone Micro-Comm local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Pilgrim Telephone Micro-Comm local or tandem switching systems, and other third-party switching systems directly connected to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and Pilgrim Telephone Micro-Comm or other third-party switching systems with A-link access to the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a Pilgrim Telephone Micro-Comm local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the BellSouth SS7 ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the Pilgrim Telephone Micro-Comm local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.