Standards for Tenant's Work Clause Samples

Standards for Tenant's Work. Tenant's work shall be completed pursuant to the following provisions: (a) Tenant shall prepare and submit to Landlord two (2) sets of final plans and specifications showing the architectural design of the Premises, including the basic mechanical system and electrical system within the Premises, plumbing, partitions and doors, complete fixturing information, and material selections and finishes. Within five (5) working days after receipt of such final plans and specifications, Landlord shall approve or suggest modifications to such final plans and specifications. Landlord shall not unreasonably refuse or delay approval of Tenant's final plans and specifications. Tenant may object to any of the suggested modifications by notice to Landlord within five (5) working days after receipt of such suggested modifications, and unless Tenant so objects such suggested modifications shall be deemed approved by Tenant. Tenant shall also submit all proposed change orders in writing (with sufficient detail to enable Landlord to understand the nature of the proposed change) to Landlord for Landlord's prior written approval, which shall not be unreasonably refused or delayed. Landlord's consent shall not be required for any change order for work costing less than Five Thousand Dollars ($5,000.00), provided that there are no more than five (5) such change orders in any thirty (30) day period. Any proposed change order shall be deemed approved by Landlord unless Landlord disapproves same within three (3) business days after the proposed change order is received by Landlord, provided that Tenant's notice requesting approval of such change order clearly notifies Landlord that the proposed change order shall be deemed approved if not disapproved within such three (3) business day period. The individuals to whom Tenant shall submit plans and specifications for approval shall be Robe▇▇ ▇. ▇▇▇▇▇▇▇, ▇▇th a copy to Cind▇ ▇▇▇▇▇, ▇▇d the individual to whom Landlord shall communicate regarding plans and specifications shall be either Jack▇▇ ▇▇▇▇▇▇▇ ▇▇ Bruc▇ ▇▇▇▇▇. ▇▇ile Landlord has the right to approve the plans and specifications, Landlord's sole interest in doing so is to protect the Building and Landlord's interests. Accordingly, Tenant shall not rely on Landlord's approvals and Landlord shall not be the guarantor of, nor in any way responsible for, the accuracy or correctness of any such plans and specifications, or the compliance thereof with applicable laws, and Landlord shall in...
View SourceView Similar (4)
Standards for Tenant's Work. All work shall be performed at Tenant’s expense, in a good and workmanlike manner, and shall not damage the building of which the Premises are a part. Tenant’s Work shall substantially comply with the plans and specifications submitted to Landlord as required by this Exhibit B and shall further comply with all applicable governmental permits, laws, ordinances and regulations. Tenant’s Work shall comply with all applicable standards of the American Insurance Association, the National Electrical Code, the American Society of Heating, Refrigeration and Air Conditioning Engineers’ Guide and Landlord’s insurance carrier. Tenant shall obtain, at Tenant’s expense and comply with all permits required by all public authorities and utilities companies. Tenant shall store all building materials, tools, and equipment within the Premises or such other location as may be specifically designated by Landlord and shall store and dispose of all trash, debris and rubbish in the manner specified by Landlord and upon the completion of Tenant’s Work shall remove all temporary structures and surplus materials. Tenant shall properly secure Tenant’s Work, with such lights, guard rails and other devices to protect Tenant’s Work, the Premises and the Center from damage from accident, storm or other hazard. There shall be no penetrations of the roof or installation of radio or television antennas without the prior written approval of Landlord. Any such roof penetrations required by Tenant must be approved by Landlord and shall be at Tenant’s expense. Such roof penetrations shall be engineered and installed under the direct supervision of Landlord.
View Source

Related to Standards for Tenant's Work

  • CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Common Areas - Rules and Regulations Lessor or such other person(s) as Lessor may appoint shall have the exclusive control and management of the Common Areas and shall have the right, from time to time, to establish, modify, amend and enforce reasonable Rules and Regulations with respect thereto in accordance with Paragraph 40. Lessee agrees to abide by and conform to all such Rules and Regulations, and to cause its employees, suppliers, shippers, customers, contractors and invitees to so abide and conform. Lessor shall not be responsible to Lessee for the non-compliance with said rules and regulations by other lessees of the Industrial Center.

  • Contract Work Hours and Safety Standards Act The following clauses apply to any Federal-aid construction contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by 29 CFR 5.5(a) or 29 CFR 4.6. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.

  • Solicitations for Subcontracts, Including Procurement of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Local Government for work to be performed under a subcontract, including procurement of materials or leases of equipment, each potential subcontractor or supplier will be notified by the Local Government of the Local Government’s obligations under this Agreement and the Acts and Regulations relative to Nondiscrimination on the grounds of race, color, or national origin.