Common use of SUBJECT MATTER OF THE CONTRACT Clause in Contracts

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performance, un-packaging and control thereof; Installation of the Equipment and its commissioning at the site; Testing of the Equipment to verify its functionality; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully in accordance with the specifications outlined in Annexes No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Surface roughness, Quality of internal/external surfaces, Process speed, Material consumption and Consistency of surface colors. Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling the Equipment after its successful installation on site - at least 1 full day (8 hours) of training of 4 operators; Free-of-charge warranty service during the warranty term; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expires. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Formulation of conditions which are recommended to be met at the place of Buyer in order to install the Equipment; Execution of the preliminary test of the Equipment according to Annex 3 hereto at the manufacturer’s premises; Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performancedelivery, un-packaging and control thereof; Installation of the Equipment and its commissioning including connection to installation infrastructure at the site; Testing Execution of the Equipment acceptance test at the site according to verify its functionalityAnnex 3 hereto; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully in accordance with the specifications outlined in Annexes No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Surface roughness, Quality of internal/external surfaces, Process speed, Material consumption and Consistency of surface colors. Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. compressed air and electrical connection schemes - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling at the Equipment after its successful installation on site - (at least 1 full 2-day (8 hours) of training of 4 2 operators); Free-of-charge warranty service during the warranty term; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expiressubject of performance (Equipment) is specified in detail in Annexes No. 1 and No. 2 hereto. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Formulation of conditions which are recommended to be met at the place of Buyer in order to install the Equipment; Execution of the preliminary test of the Equipment according to Annex 3 hereto at the manufacturer’s premises; Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performancedelivery, un-packaging and control thereof; Installation of the Equipment and its commissioning including connection to installation infrastructure at the site; Testing Execution of the Equipment acceptance test at the site according to verify its functionalityAnnex 3 hereto; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully in accordance with the specifications outlined in Annexes No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Surface roughness, Quality of internal/external surfaces, Process speed, Material consumption and Consistency of surface colors. Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. compressed air and electrical connection schemes - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling at the Equipment after its successful installation on site - (at least 1 full 2-day (8 hours) of training of 4 2 operators); Free-of-charge warranty service during the warranty term; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expires. The subject of performance (Equipment) is specified in detail in Annexes No. 1 and No. 2 hereto. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Formulation of conditions which are required to be met at the place of Buyer in order to install the Equipment; Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performancedelivery and handover, un-packaging and control thereof; Installation of the Equipment and its commissioning all components necessary to operate the Equipment including connection to installation infrastructure at the site; Testing Execution of the Equipment acceptance test: Exposure of a single diffraction image; Recording a series of images at the bit depth and speed meeting the Equipment’s specifications; Demonstration of the functionality of the software according to verify its functionality; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully technical specifications in accordance with the specifications outlined in Annexes Annex No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Surface roughness, Quality of internal/external surfaces, Process speed, Material consumption and Consistency of surface colorshereto. Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. vacuum, gas and electrical connection schemes - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling at the Equipment after its successful installation on site - (at least 1 full one-day (8 hours) of training of 4 three operators); Free-of-charge warranty service during the warranty termincluding service inspections on-site, if necessary; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expiressubject of performance (Equipment) is specified in detail in Annexes No. 1 and No. 2 hereto. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter more strict standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing spraying of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performance, un-packaging and control thereof; Installation of the Equipment and its commissioning at the site; Testing of the Equipment to verify its functionality; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully in accordance with the specifications outlined in Annexes No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Residual powder quantity on a plastic part, Surface roughnessroughness of a plastic part, Quality Uniformity of internal/external surfacesthe surface of a plastic part, Process speed, Material consumption Cleaning process speed and Consistency of surface colors. User-friendliness / ergonomics; Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling the Equipment after its successful installation on site - at least 1 full day (8 hours) of training of 4 operators; Free-of-charge warranty service during the warranty term; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expires. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing of plastic parts and (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Formulation of conditions which are recommended to be met at the place of Buyer in order to install the Equipment; Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performancesite, un-packaging and control thereof; Installation of the Equipment and its commissioning including connection to installation infrastructure at the site; Testing Execution of the Equipment to verify its functionality; this will involve conducting tests on real prints from SLS technology to demonstrate that acceptance test: For the Equipment operates fully in accordance with microwave plasma CVD deposition system: growth of diamond film verified by Raman measurement (available by Buyer), growth rate and homogeneity evaluation over 4 inch area (optical measurements and cross section SEM images, available by Buyer) For the specifications outlined in Annexes No. 1 PVD & PE CVD deposition system: RF deposited oxide or nitride reactively deposited layer, growth rate and 2 hereto homogeneity evaluation over 4 inch area (optical measurements and meets all declared parameters without exception; the Buyer will specifically verify: Surface roughnesscross section SEM images, Quality of internal/external surfaces, Process speed, Material consumption and Consistency of surface colors. available by Buyer) Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. vacuum, gas and electrical connection schemes - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling at the Equipment after its successful installation on site - (at least 1 full 1-day (8 hours) of training of 4 operators); Free-of-charge warranty service during the warranty termincluding service inspections; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expiressubject of performance (Equipment) is specified in detail in Annexes No. 1 and No. 2 hereto. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter more strict standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.

SUBJECT MATTER OF THE CONTRACT. The subject of this Contract is the obligation on the part of the Seller to deliver and transfer into the Buyer’s ownership: the Equipment for chemical smoothing blasting of plastic parts (hereafter the “Equipment”) specified in detail in Annexes No. 1 and No. 2 hereto and the Buyer undertakes to take delivery of the Equipment and to pay to the Seller the agreed upon price. The following activities form an integral part of the performance to be provided by the Seller: Transport of the Equipment incl. all accessories specified in Annexes 1 and 2 of the Contract to the place of performance, un-packaging and control thereof; Installation of the Equipment and its commissioning at the site; Testing of the Equipment to verify its functionality; this will involve conducting tests on real prints from SLS technology to demonstrate that the Equipment operates fully in accordance with the specifications outlined in Annexes No. 1 and 2 hereto and meets all declared parameters without exception; the Buyer will specifically verify: Residual powder quantity on a plastic part, Surface roughnessroughness of a plastic part, Quality Uniformity of internal/external surfacesthe surface of a plastic part, Process speed, Material consumption Cleaning process speed and Consistency of surface colors. User-friendliness / ergonomics; Delivery of detailed instructions and manuals for operation and maintenance, including list of spare parts, etc. - all in Czech or English language, in electronic or hardcopy (printed) versions; Training of operators focused on controlling the Equipment after its successful installation on site - at least 1 full day (8 hours) of training of 4 operators; Free-of-charge warranty service during the warranty term; Provision of free technical support in the form of consultations, e.g. regarding fine tuning of the Equipment. The Seller shall provide the Buyer with this free support even after the warranty expires. The Seller shall be liable for the Equipment and related services to be in full compliance with this Contract, its Annexes and all valid legal regulation, technical and quality standards and that the Buyer will be able to use the Equipment for the defined purpose. In case of any conflict between applicable standards it is understood that the stricter standard or its part shall always apply. The delivered Equipment and all its parts and accessories must be brand new and unused.