SUBJECT OF THIS CONTRACT Sample Clauses
The 'Subject of This Contract' clause defines the main purpose and scope of the agreement between the parties. It typically outlines what goods, services, or obligations are being exchanged or performed, such as the sale of specific products, provision of consulting services, or completion of a project. By clearly stating what the contract covers, this clause ensures both parties have a mutual understanding of their commitments and helps prevent disputes over the contract’s intent or coverage.
SUBJECT OF THIS CONTRACT. The Contractor undertakes to supply the Client with 1 (one) piece of Device for hot foil stamping, embossing and die-cutting, including all other related accessories and equipment, manufactured under applicable EU directives and regulations related to the subject of this Contract according to paragraph 2 of this Article and in accordance with the Technical specifications attached to this Contract as Annex No. 1, which is an integral part hereof, and in accordance with the Tender, and within the terms stated in the Time Schedule attached to this Contract as Annex No. 3, which is an integral part hereof. (hereafter referred to as the "Device”, unless otherwise stated by individual provisions of this Contract) The supplement of the Device according to paragraph 1 includes: transportation of the Device including liability insurance which provides cover for damage to the Device, with a compensation limit as determined in Article XIII paragraph 1 hereof, DPU Installation siteDAP Prague - place of performance (Incoterms® 2020) and transport to the Installation site, passing FAT in accordance with Article VIII hereof, installation and commissioning of the Device (including setting up programs for processing all Client’s jobs (max. 5 programs), passing SAT in accordance with Article IX hereof, including 30 calendar days of Device test run, training of specified Client’s employees in the Device operation and maintenance for at least 5 persons (hereinafter referred to as the "operator training“), conducted at the Client’s Production Plant I for a minimum of 3 working days (8 hours per day, 60 minutes per hour) and conducted at the Contractor’s Production Plant in the same range, handover of certificates and documents relating to the use of the Device, as specified in Annex No. 2 which is an integral part of this Contract (in particular, operating and maintenance instructions, technical documentation in the Czech language). Detailed specification of the Device is stated in Technical specification which is Annex No. 1 to this Contract, especially in its part 1.a called General technical specification and other project implementation requirements for hot foil stamping device. The subject of this Contract also includes the handover of a list of all installed computers, including the basic parameters, and software, which is part of the delivery hereunder, including identification numbers and software license numbers. The above list must contain a specific information whet...
SUBJECT OF THIS CONTRACT. 1. The Contractor undertakes to supply the Client with 4 pieces of Ink Agitator for Intagliocolor “8“, serial no.: 63303501, manufactured under applicable EU directives and regulations related to the subject of this Contract according to Paragraph 2 of this Article and in accordance with the Technical specifications attached to this Contract as Annex No. 1, which is an integral part of this Contract, and in accordance with the Tender. (hereafter referred to as the "Device” or "agitator", unless otherwise stated by individual provisions of this Contract)
2. The supplement of the Device according to Paragraph 1 includes:
a) transportation of the Device including liability insurance which provides cover for damage to the Device, DAP Praha (Incoterms® 2020),
b) installation and commissioning of the Device,
c) training of specified Client’s employees in the Device operation and maintenance for at least 5 persons (hereinafter referred to as the "operator training“), Detailed specification of the Device is stated in Technical specification which is Annex No. 1 to this Contract.
3. The Client undertakes to take over the subject of this Contract as specified above in this Article, and to the price for it as specified herein.
SUBJECT OF THIS CONTRACT. 1. The Seller undertakes to supply the Buyer with 1 (one) Cutting label production line with banding, type XXX, including all other related accessories and equipment, manufactured under applicable EU directives and regulations and related to the subject of this Contract and in line with the technical specifications attached to this Contract as Annex No. 1, which is an integral part hereof (hereafter referred to as the "Device”, unless otherwise stated by individual provisions of this Contract).
2. The subject of this Contract includes:
a) transportation and moving of the Device to the determined Buyer’s facility and place of installation, including liability insurance which provides cover for damage to the device, with a compensation limit as determined in this Contract, DAP Praha (Incoterms® 2020),
b) installation and commissioning of the Device, including 30 calendar days of its trial operation,
c) training of specified Buyer’s employees in the Device operation and maintenance for at least 5 persons (hereinafter referred to as the "operator training“), conducted at the Buyer’s facility for a minimum of 5 business days (8 hours per day, 60 minutes per hour),
d) handover of certificates and documents relating to the use of the Device, as specified in Annex No. 2 which is an integral part of this Contract (in particular, operating and maintenance instructions, technical documentation in the Czech language),
3. The subject of this Contract also includes the handover of a list of all installed computers, including the basic parameters, and software, which is part of the delivery hereunder, including identification numbers and software license numbers. The above list must contain a specific information whether the OEM (Original Equipment Manufacturer) version is used or not. If this SW identification is missing, it is understood that this is not an OEM version.
4. The Seller states that:
a) the Seller is aware that the Buyer shall use the Device specified in paragraph 1 of this Article for cutting sheets into individual smaller formats, including their banding, in 3-shift operation, and Device will be fully functional for this purpose,
b) during the performance of this Contract, the Seller shall observe legal regulations applicable to the Buyer, regarding occupational safety and health, fire protection and environmental protection, including ecological disposal of waste, provided that the Seller’s technicians are familiarized with these regulations by the Buye...
SUBJECT OF THIS CONTRACT. 1. The Contractor undertakes to supply the Client with 1 (one) piece of Milling and Implanting System of Contact Chip Modules and Fingerprintsenzors for ID-1 Cards, including all other related accessories and equipment, manufactured under applicable EU directives and regulations related to the subject of this Contract according to paragraph 2 of this Article and in accordance with the Technical specifications attached to this Contract as Annex No. 1, which is an integral part hereof, and in accordance with the Tender, and within the terms stated in the Time Schedule attached to this Contract as Annex No. 3, which is an integral part hereof. (hereafter referred to as the "Device”, unless otherwise stated by individual provisions of this Contract)
2. The supplement of the Device according to paragraph 1 includes:
a) transportation of the Device including liability insurance which provides cover for damage to the Device, with a compensation limit as determined in Article XIII paragraph 1 hereof, DAP Praha (Incoterms® 2020),
b) installation and commissioning of the Device including setting up programs for processing all Client’s ID-1 jobs (max. 10 programs) and setting and production of the pilot project with the fingerprint sensors with the delivery of the testing material and material for the production, including 30 calendar days of its test run, c) training of specified Client’s employees in the Device operation and maintenance for at least 5 persons (hereinafter referred to as the "operator training“), conducted at the Client’s Production Plant I for a minimum of 3 working days (8 hours per day, 60 minutes per hour),
d) handover of certificates and documents relating to the use of the Device, as specified in Annex No. 2 which is an integral part of this Contract (in particular, operating and maintenance instructions, technical documentation in the Czech language). Detailed specification of the Device is stated in Technical specification which is Annex No. 1 to this Contract, especially in its part 1.a called General technical specification and other project implementation requirements for card milling and module implanting system.
3. The subject of this Contract also includes the handover of a list of all installed computers, including the basic parameters, and software, which is part of the delivery hereunder, including identification numbers and software license numbers. The above list must contain a specific information whether the OEM (Original Equipm...
SUBJECT OF THIS CONTRACT. 1. The Seller undertakes:
a) to supply the Buyer with a Computer to High-Security Plate/Film and relating Plate Processor for Offset Plates (Direct thermal plate exposure system for dry and wet offset plates as well as ablative films), including all other related accessories and equipment, manufactured under applicable EU directives and regulations related to the subject of this Contract and in line with the technical specifications attached to this Contract as Annex No. 1, which is an integral part hereof, and in line with the Tender (hereinafter referred to as the "Device” regardless of whether the Device consists of 1 or more pieces unless otherwise stated by individual provisions of this Contract) and futher transfer to the Buyer ownership of the Device under the conditions set out in the present Contract;
b) to make deliveries of the required amount of consumables, spare parts and relating material for the Device, at the express request of the Buyer, further specifications of consumables are given in Annex No. 2 to this Contract – Consumables, relating material and servicing (hereinafter reffered to as together only “Material”);
c) to grant repair and services not covered by the warranty (hereinafter “out of warranty service”).
2. The subject of this Contract according to par. 1
(a) includes:
a) transportation and moving of the Device to the determined Buyer’s facility and place of installation, including liability insurance which provides cover for damage to the Device, DDP Praha (Incoterms® 2020),
b) installation including measures to ensure even distribution of the weight of the Device at the installation site in accordance with Annex 1 hereto and commissioning of the Device, verification of its serviceability within the trial operation period in the scope of 60 calendar days of its test run;
c) supply of the necessary quantity of consumables for commissioning and verification of the quality and serviceability of the Device at minimum quantity 400 pcs of printing plates, whereas stated amount of 400 pcs of plates, the Seller requires to divide in the manner specified in Annex 1 of this Contract;
d) training of specified Buyer’s employees in the Device operation and maintenance for at least 2 persons (hereinafter referred to as the "operator training“), conducted at the Buyer’s facility within the extent according to the Seller's recommendation, but minimum of 3 business days (8 hours per day, 60 minutes per hour),
e) to handover of certificates and...
SUBJECT OF THIS CONTRACT. The Seller undertakes to supply the Buyer with 1 (one) piece of a Laminating Press, type [the Seller to add the type of device], including all other related accessories and equipment, manufactured under applicable EU directives and regulations related to the subject of this Contract and in line with the technical specifications attached to this Contract as Annex No. 1, which is an integral part hereof, and in line with the Tender (hereafter referred to as the "Device”, unless otherwise stated by individual provisions of this Contract). The subject of this Contract includes: transportation of the Device including liability insurance which provides cover for damage to the Device, with a compensation limit as determined in Art. XII (1) hereof, DAP Praha (Incoterms® 2020), * PMC installation and commissioning of the Device, including 30 calendar days of its test run, training of specified Buyer’s employees in the Device operation and maintenance for at least 5 persons (hereinafter referred to as the "operator training“), conducted at the Buyer’s facility for a minimum of 3 business days (8 hours per day, 60 minutes per hour), handover of certificates and documents relating to the use of the Device, as specified in Annex No. 2 which is an integral part of this Contract (in particular, operating and maintenance instructions, technical documentation in the Czech language). filling of heating fluid and commissioning of the supplied Heating Unit, supply and installation of a special connector/s (connecting flanges and cables) enabling cable connection between Device, Heating Unit or switch cabinet in case that the Device offered by the Seller demands it. The subject of this Contract also includes the handover of a list of all installed computers, including the basic parameters, and software, which is part of the delivery hereunder, including identification numbers and software license numbers. The above list must contain a specific information whether the OEM (Original Equipment Manufacturer) version is used or not. If this SW identification is missing, it is understood that this is not an OEM version. The subject of this Contract does not include supply following components and related activities: * PMC
a) supply and installation of the Cooling unit with coolant and commissioning of the Cooling Unit including the spreading and antivibrations pads;
b) supply and installation of Pipes and cabling between the Device and the Cooling Unit;
c) supply and installation of...