Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone and BellSouth; 4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database; 4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers. 4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone. 4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner. 4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone’s local switch. 4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone <<customer_short_name>> and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone<<customer_short_name>>.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Telephone<<customer_short_name>>’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Telecommunications, Telecommunications, Telecommunications
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Lightyear and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneLightyear.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneLightyear’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Clec Agreement, Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Talk America and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneTalk America.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneTalk America’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 3 contracts
Sources: Telecommunications, Bellsouth® / Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone CBX One-Stop and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCBX One-Stop.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneCBX One-Stop’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Southern Telecom and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSouthern Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneSouthern Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Comm South and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneComm South.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneComm South’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Granite and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGranite.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneGranite’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ITC^DeltaCom and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneITC^DeltaCom.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneITC^DeltaCom’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone PLI and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephonePLI.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephonePLI’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone AFN and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneAFN.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneAFN’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone <customer_short_name> and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone<customer_short_name>.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Telephone<customer_short_name>’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Symtelco and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSymtelco.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneSymtelco’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone CCI and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCCI.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneCCI’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone EZ Phone and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneEZ Phone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneEZ Phone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Global Connection and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGlobal Connection.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneGlobal Connection’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Clec Agreement, Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone MRC and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneMRC.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneMRC’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone <<customer_name>> and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone<<customer_name>>.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone<<customer_name>>’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone CCI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCCI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneCCI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone NGTelecom and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNGTelecom.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneNGTelecom’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Covista and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCovista.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneCovista’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone FLATEL and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneFLATEL.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneFLATEL’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone NOW and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNOW.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneNOW’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Telstar Communications and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneTelstar Communications.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneTelstar Communications’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone World Access and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneWorld Access.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneWorld Access’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Oronoco and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneOronoco.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneOronoco’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneConextel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneConextel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Dialogica and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneDialogica.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneDialogica’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone BSE and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneBSE.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneBSE’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Delta Phones and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneDelta Phones.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneDelta Phones’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Lightning Communications and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneLightning Communications.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneLightning Communications’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Clearwave Communications and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneClearwave Communications.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneClearwave Communications’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Preferred and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephonePreferred.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephonePreferred’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 2.7.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 2.7.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 2.7.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ONS and BellSouth;
4.3.2.1.3 2.7.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 2.7.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 2.7.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Points (PSAPs) where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 2.7.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 2.7.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneONS.
4.3.2.3 2.7.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 2.7.3.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone’s ONS’ local switch.
4.3.2.5 2.7.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
2.7.3.6 Upon ONS’ purchase of overflow trunk groups, Tandem Switching shall provide an alternate routing pattern for ONS’ traffic overflowing from direct end office high usage trunk groups.
Appears in 1 contract
Sources: Market Based Rates Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone 1-800- RECONEX and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone1-800- RECONEX.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Telephone1-800- RECONEX’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Quality Telephone and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Quality Telephone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Quality Telephone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone VarTec and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneVarTec.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneVarTec’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Think 12 and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneThink 12.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneThink 12’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Symtelco and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSymtelco.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneSymtelco’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone North Star Telecom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNorth Star Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneNorth Star Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone DTM and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneDTM.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneDTM’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone COMTECH21 and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCOMTECH21.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneCOMTECH21’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Ruddata and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneRuddata.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneRuddata’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Home Telecom and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneHome Telecom.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneHome Telecom’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Deland Actel and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneDeland Actel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneDeland Actel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Vertex and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneVertex.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneVertex’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone e-Tel and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephonee-Tel.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephonee-Tel’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Global Connection and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGlobal Connection.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneGlobal Connection’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone NationNET and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNationNET.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneNationNET’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ATI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneATI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneATI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Budget Phone and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneBudget Phone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneBudget Phone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Seven ▇▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSeven Bridges.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneSeven Bridges’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Micro-Comm and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneMicro- Comm.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneMicro- Comm’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone US LEC and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneUS LEC.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneUS LEC’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Solution Telecom and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSolution Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneSolution Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone MTS Communications and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneMTS Communications.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneMTS Communications’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇▇ Communications and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone▇▇▇▇ Communications.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone▇▇▇▇ Communications’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone DPI Teleconnect and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneDPI Teleconnect.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneDPI Teleconnect’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Starlink and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneStarlink.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneStarlink’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Tel West and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneTel West.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneTel West’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Velocity and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneVelocity.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneVelocity’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone TWTC and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneTWTC.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneTWTC’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇.▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone▇▇▇.▇▇▇.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Telephone▇▇▇.▇▇▇’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 2.7.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 2.7.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 2.7.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone CUSTOMER and BellSouth;
4.3.2.1.3 2.7.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 2.7.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 2.7.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Points (PSAPs) where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 2.7.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 2.7.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneCUSTOMER.
4.3.2.3 2.7.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-non discriminatory manner.
4.3.2.4 2.7.3.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneCUSTOMER’s local switch.
4.3.2.5 2.7.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
2.7.3.6 Upon CUSTOMER’s purchase of overflow trunk groups, Tandem Switching shall provide an alternate routing pattern for CUSTOMER’s traffic overflowing from direct end office high usage trunk groups.
Appears in 1 contract
Sources: MBR Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Starlink and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneStarlink.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneStarlink’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Quality Telephone and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Quality Telephone.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Quality Telephone’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 2.7.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 2.7.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 2.7.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Vertex and BellSouth;
4.3.2.1.3 2.7.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 2.7.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 2.7.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Points (PSAPs) where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 2.7.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 2.7.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneVertex.
4.3.2.3 2.7.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-non discriminatory manner.
4.3.2.4 2.7.3.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneVertex’s local switch.
4.3.2.5 2.7.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
2.7.3.6 Upon Vertex’s purchase of overflow trunk groups, Tandem Switching shall provide an alternate routing pattern for Vertex’s traffic overflowing from direct end office high usage trunk groups.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:,
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone A-Tech Telecom and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneA-Tech Telecom.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneA-Tech Telecom’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone NationsLink and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNationsLink.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneNationsLink’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Knology and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneKnology.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneKnology’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneEPICUS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneEPICUS’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇▇▇▇▇.▇▇▇ and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone▇▇▇▇▇▇▇.▇▇▇.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone▇▇▇▇▇▇▇.▇▇▇’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone VarTec and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneVarTec.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneVarTec’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone FeroNetworks and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneFeroNetworks.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneFeroNetworks’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Preferred and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephonePreferred.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephonePreferred’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Metro Teleconnect and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneMetro Teleconnect.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneMetro Teleconnect’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Southern Digital and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSouthern Digital.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneSouthern Digital’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone TeleConex and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneTeleConex.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneTeleConex’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone WorldxChange and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneWorldxChange.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneWorldxChange’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Ring Connection and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneRing Connection.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneRing Connection’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone C.M. and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone.C.M..
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneC.M.’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone International Telnet and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneInternational Telnet.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneInternational Telnet’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Money To Go and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneMoney To Go.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneMoney To Go’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Gateway and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGateway.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneGateway’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone South Carolina Net and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneSouth Carolina Net.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneSouth Carolina Net’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone NTBS and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneNTBS.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneNTBS’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Pilgrim Telephone and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Pilgrim Telephone.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville Pilgrim Telephone’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone FPB and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneFPB.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneFPB’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone BSE and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneBSE.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneBSE’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ConnectNow! and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneConnectNow!.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneConnectNow!’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone PLI and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephonePLI.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephonePLI’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Globe and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGlobe.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneGlobe’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Excel PCHP and BellSouth;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneExcel PCHP.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneExcel PCHP’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ▇▇▇.▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville Telephone▇▇▇.▇▇▇.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville Telephone▇▇▇.▇▇▇’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Advantage Group and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneAdvantage Group.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneAdvantage Group’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Grande and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneGrande.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneGrande’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Columbus Local and BellSouth;
4.3.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneColumbus Local.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-free traffic received from Louisville TelephoneColumbus Local’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone ICG and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneICG.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneICG’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 4.5.3.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 4.5.3.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 4.5.3.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone U-Dial and BellSouth▇▇▇▇▇▇▇▇▇;
4.3.2.1.3 4.5.3.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 4.5.3.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 4.5.3.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 4.5.3.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 4.5.3.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneU-Dial.
4.3.2.3 4.5.3.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 4.5.3.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneU-Dial’s local switch.
4.3.2.5 4.5.3.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.3.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in Telcordia TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90June 1, 1990. The requirements for Tandem Switching include, include but are not limited to the following:
4.3.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection;
4.3.2.1.2 Tandem Switching will provide screening as jointly agreed to by Louisville Telephone Utility USA and BellSouth;
4.3.2.1.3 Where applicable, Tandem Switching shall provide Advanced Intelligent Network AIN triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability;
4.3.2.1.4 Where applicable, Tandem Switching shall provide access to Toll Free number database;
4.3.2.1.5 Tandem Switching shall provide connectivity to PSAPs Public Safety Answering Point (PSAP)s where 911 solutions are deployed and the tandem is used for 911; and
4.3.2.1.6 Where appropriate, Tandem Switching shall provide connectivity for the purpose of routing transit traffic to and from other carriers.
4.3.2.2 BellSouth may perform testing and fault isolation on the underlying switch that is providing Tandem Switching. Such testing shall be testing routinely performed by BellSouth. The results and reports of the testing shall be made available to Louisville TelephoneUtility USA.
4.3.2.3 BellSouth shall control congestion points and network abnormalities. All traffic will be restricted in a non-discriminatory manner.
4.3.2.4 Tandem Switching shall process originating toll-toll free traffic received from Louisville TelephoneUtility USA’s local switch.
4.3.2.5 In support of AIN triggers and features, Tandem Switching shall provide SSP capabilities when these capabilities are not available from the Local Switching Network Element, Element to the extent such Tandem Switch has such capability.
Appears in 1 contract
Sources: Interconnection Agreement