Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching. 4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references. 4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination. 4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions. 4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition. 4.1.4.6 BellSouth shall activate service for <<customer_name>> customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s services without loss of switch feature functionality as defined in this Agreement. 4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule. 4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching. 4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner. 4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace. 4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 5 contracts
Sources: Interconnection Agreement, Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.1.4.1 7.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 7.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical referencesBellcore’s Local Switching Systems General Requirements (FR-NWT-000064).
4.1.4.3 7.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 7.2.1.3 Subject to this sectionSection 12, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> US LEC will be made pursuant to the BFR/NBR Bona Fide Request Process as set forth in General Terms and Conditionsof Attachment 9.
4.1.4.5 7.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 7.2.1.5 BellSouth shall activate service for <<customer_name>> an US LEC customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>US LEC’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 7.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 7.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 7.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non discriminatory manner.
4.1.4.10 7.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 7.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 3 contracts
Sources: Clec Agreement, Clec Agreement, Clec Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> SouthEast will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> SouthEast customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>SouthEast’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 3 contracts
Sources: Clec Agreement, Clec Agreement, Bellsouth® / Clec Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> VELOCITY will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an VELOCITY customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>VELOCITY’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 2 contracts
Sources: Clec Agreement, Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> CLEC-1 will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> CLEC-1 customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>CLEC-1’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 2 contracts
Sources: Clec Agreement, Clec Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> BTI will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> BTI customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>BTI’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 2 contracts
Sources: Interconnection Agreement, Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> IDS will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an IDS customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s IDS’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 2 contracts
Sources: Clec Agreement, Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NOW will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> NOW customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>NOW’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Bellsouth® / Clec Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> API will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> API customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>API’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Edge Connections will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Edge Connections customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Edge Connections’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Loca l Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall shal l route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Metro FiberLink, Inc. will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Metro FiberLink, Inc. customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Metro FiberLink, Inc.’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> World Access will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an World Access customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>World Access’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Momentum Business Solutions will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> a Momentum Business Solutions customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s Momentum Business Solutions’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 7.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 7.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical referencesBellcore’s Local Switching Systems General Requirements (FR-NWT-000064).
4.1.4.3 7.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 7.2.1.3 Subject to this sectionSection 12, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Time Warner will be made pursuant to the BFR/NBR Bona Fide Request Process as set forth in General Terms and Conditionsof Attachment 9.
4.1.4.5 7.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 7.2.1.5 BellSouth shall activate service for <<customer_name>> an Time Warner customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Time Warner’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 7.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 7.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 7.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non discriminatory manner.
4.1.4.10 7.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 7.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Bellsouth / Clec Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Money To Go will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> a Money To Go customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Money To Go’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> 1-800 RECONEX, Inc. will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> 1-800 RECONEX, Inc. customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>1-800 RECONEX, Inc.’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Choctaw will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Choctaw customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Choctaw’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Navigator will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Navigator customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Navigator’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Oltronics will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an Oltronics customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Oltronics’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Wakul will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Wakul customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Wakul’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Xspedius will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Xspedius customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Xspedius’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Community will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an Community customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Community’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 7.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 7.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical referencesBellcore’s Local Switching Systems General Requirements (FR-NWT-000064).
4.1.4.3 7.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 7.2.1.3 Subject to this sectionSection 12, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> OptiLink will be made pursuant to the BFR/NBR Bona Fide Request Process as set forth in General Terms and Conditionsof Attachment 9.
4.1.4.5 7.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 7.2.1.5 BellSouth shall activate service for <<customer_name>> an OptiLink customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>OptiLink’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 7.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 7.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 7.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non discriminatory manner.
4.1.4.10 7.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 7.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Xspedius will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Xspedius customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Xspedius’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment e quipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement Amendment
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> MRC will be made pursuant to the BFR/NBR Process as set forth in General Terms and ConditionsAttachment 12.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> MRC customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>MRC’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 9.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 9.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 9.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 9.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> ITC/\DeltaCom will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 9.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 9.1.4.6 BellSouth shall activate service for <<customer_name>> an ITC/\DeltaCom customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s 's services to <<customer_name>>’s ITC/\DeltaCom's services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 9.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 9.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 9.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 9.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 9.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> EPB Telecommunications will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> EPB Telecommunications customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s EPB Telecommunications' services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Rhythms will be made pursuant to the BFR/NBR Process as set forth in General Terms and ConditionsAttachment 12.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Rhythms customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s Rhythms’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> LCT will be made pursuant to the BFR/NBR Process as set forth in General Terms and ConditionsAttachment 9.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> LCT customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>LCT’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Centennial will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an Centennial customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Centennial’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NATIONSLINK COMMUNICATIONS will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an NATIONSLINK COMMUNICATIONS customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s NATIONSLINK COMMUNICATIONS’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Mpower will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an Mpower customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Mpower’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Knology will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an Knology customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s 's services to <<customer_name>>’s Knology's services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
4.1.4.11.1 Telephone Service Prioritization;
4.1.4.11.2 Related services for handicapped;
4.1.4.11.3 Soft dial tone where required by law; and
4.1.4.11.4 Any other service required by law.
4.1.4.12 BellSouth shall provide Switching Service Point (SSP) capabilities and signaling software to interconnect the signaling links destined to the Signaling Transfer Point Switch (STPS). These capabilities shall adhere to the technical specifications set forth in the applicable industry standard technical references.
4.1.4.13 BellSouth shall provide interfaces to adjuncts through Telcordia (formerly BellCore) standard interfaces. These adjuncts can include, but are not limited to, the Service Circuit Node and Automatic Call Distributors.
4.1.4.14 BellSouth shall provide performance data regarding a customer line, traffic characteristics or other measurable elements to Knology, upon a reasonable request from Knology. CLEC will pay BellSouth for all costs incurred to provide such performance data through the Business Opportunity Request process.
4.1.4.15 BellSouth shall offer Local Switching that provides feature offerings at parity to those provided by BellSouth to itself or any other Party.
4.1.4.16 BellSouth shall offer to Knology all AIN triggers in connection with its SMS/SCE offering which are supported by BellSouth for offering AIN-based services
4.1.4.17 Where capacity exists, BellSouth shall assign each Knology customer line the class of service designated by Knology (e.g., using line class codes or other switch specific provisioning methods), and shall route directory assistance calls from Knology customers to Knology directory assistance operators at Knology's option.
4.1.4.18 Where capacity exists, BellSouth shall assign each Knology customer line the class of services designated by Knology (e.g., using line class codes or other switch specific provisioning methods) and shall route operator calls from Knology customers to Knology operators at Knology's option. For example, BellSouth may translate 0- and 0+ intraLATA traffic, and route the call through appropriate trunks to an Knology Operator Services Position System (OSPS). Calls from Local Switching must pass the ANI-II digits unchanged.
4.1.4.19 Local Switching shall be offered in accordance with the technical specifications set forth in the applicable industry standard references.
Appears in 1 contract
Sources: Telecommunications (Knology Inc)
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> TLX will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an TLX customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>TLX’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> DSL Telecom will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> DSL Telecom customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>DSL Telecom’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> DSL Telecom will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> DSL Telecom customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>DSL Telecom’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> ▇▇▇▇▇▇▇ will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an ▇▇▇▇▇▇▇ customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s ▇▇▇▇▇▇▇’▇ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> EPB will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an EPB customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>EPB’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> ECI will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an ECI customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>ECI’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Pilgrim will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an Pilgrim customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Pilgrim’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> CCI will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an CCI customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>CCI’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Choctaw will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Choctaw customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Choctaw’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Alliance will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an Alliance customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Alliance’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> E-Tel will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> E-Tel customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>E-Tel’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> U.S. South will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> U.S. South customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>U.S. South’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> E-Z Access will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> E-Z Access customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>E-Z Access’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NEW EDGE NETWORKS will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an NEW EDGE NETWORKS customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>NEW EDGE NETWORKS’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section Sect ion apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Actel will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Actel customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Actel’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing test ing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform perf orm manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NTERA, INC. will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> NTERA, INC. customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>NTERA, INC.’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> aXessa will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> aXessa customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>aXessa’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Preferred will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an Preferred customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Preferred’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> IDS will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an IDS customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s IDS’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Global Crossing will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Global Crossing customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Global Crossing’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> IDS Long Distance will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an IDS Long Distance customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>IDS Long Distance’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Master Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Lightyear will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Lightyear customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Lightyear’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> ▇▇▇▇ Communications will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> ▇▇▇▇ Communications customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>▇▇▇▇ Communications’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NOW will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> NOW customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>NOW’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Light Networks will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an Light Networks customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Light Networks’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> PowerNet will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> PowerNet customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>PowerNet’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> NA Communications will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> ▇▇ ▇▇ Communications customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>NA Communications’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 7.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function function, such as packet switching, of Local Switching.
4.1.4.2 7.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical referencesBellcore’s Local Switching Systems General Requirements (FR-NWT-000064).
4.1.4.3 7.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 7.2.1.3 Subject to this sectionsections 10.1.1 and 10.1.3, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Telepak will be made pursuant to the BFR/NBR Bona Fide Request Process as set forth in General Terms and Conditionsof Attachment 9.
4.1.4.5 7.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 7.2.1.5 BellSouth shall activate service for <<customer_name>> a Telepak customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Telepak’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 7.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 7.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 7.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non discriminatory manner.
4.1.4.10 7.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 7.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Communication Services Integrated, Inc. will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Communication Services Integrated, Inc. customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Communication Services Integrated, Inc.’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Arrow will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Arrow customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Arrow’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Sail NetWorks will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> an Sail NetWorks customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Sail NetWorks’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Clec Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> API will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> API customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>API’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> Broadslate will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> Broadslate customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>Broadslate’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> LS-One will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> LS-One customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>LS-One’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 3.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 3.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 3.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 3.2.1.3 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> CSI will be made pursuant to the BFR/NBR Bona Fide Request/ New Business Request Process as set forth in General Terms and Conditions.
4.1.4.5 3.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 3.2.1.5 BellSouth shall activate service for <<customer_name>> an CSI customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>CSI’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 3.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 3.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 3.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 3.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 3.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> New Access will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> New Access customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>’s New Access’ services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement
Technical Requirements. 4.1.4.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical references.
4.1.4.3 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 Subject to this section, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> ZNC will be made pursuant to the BFR/NBR Process as set forth in General Terms and Conditions.
4.1.4.5 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 BellSouth shall activate service for <<customer_name>> ZNC customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>ZNC’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non- discriminatory manner.
4.1.4.10 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Telecommunications
Technical Requirements. 4.1.4.1 7.2.1 The requirements set forth in this Section apply to Local Switching, but not to the Data Switching function of Local Switching.
4.1.4.2 7.2.1.1 Local Switching shall be equal to or better than the requirements for Local Switching set forth in the applicable industry standard technical referencesBellcore’s Local Switching Systems General Requirements (FR-NWT-000064).
4.1.4.3 7.2.1.2 When applicable, BellSouth shall route calls to the appropriate trunk or lines for call origination or termination.
4.1.4.4 7.2.1.3 Subject to this sectionSection 12, BellSouth shall route calls on a per line or per screening class basis to (1) BellSouth platforms providing Network Elements or additional requirements (2) Operator Services platforms, (3) Directory Assistance platforms, and (4) Repair Centers. Any other routing requests by <<customer_name>> GulfPines will be made pursuant to the BFR/NBR Bona Fide Request Process as set forth in General Terms and Conditionsof Attachment 9.
4.1.4.5 7.2.1.4 BellSouth shall provide unbranded recorded announcements and call progress tones to alert callers of call progress and disposition.
4.1.4.6 7.2.1.5 BellSouth shall activate service for <<customer_name>> an GulfPines customer or network interconnection on any of the Local Switching interfaces. This includes provisioning changes to change a customer from BellSouth’s services to <<customer_name>>GulfPines’s services without loss of switch feature functionality as defined in this Agreement.
4.1.4.7 7.2.1.6 BellSouth shall perform routine testing (e.g., Mechanized Loop Tests (MLT) and test calls such as 105, 107 and 108 type calls) and fault isolation on a mutually agreed upon schedule.
4.1.4.8 7.2.1.7 BellSouth shall repair and restore any equipment or any other maintainable component that may adversely impact Local Switching.
4.1.4.9 7.2.1.8 BellSouth shall control congestion points such as those caused by radio station call-ins, and network routing abnormalities. All traffic shall be restricted in a non-non discriminatory manner.
4.1.4.10 7.2.1.9 BellSouth shall perform manual call trace and permit customer originated call trace.
4.1.4.11 7.2.1.10 Special Services provided by BellSouth will include the following:
Appears in 1 contract
Sources: Interconnection Agreement