Common use of Technical Requirements Clause in Contracts

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> CLEC-1 and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>CLEC-1; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> DSL Telecom and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>DSL Telecom; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> SouthEast and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>SouthEast; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NOW and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NOW; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 11.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 11.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 11.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> ITC^DeltaCom and BellSouth; 4.2.2.3 11.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 11.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>ITC^DeltaCom; 4.2.2.5 11.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 11.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 11.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers. 11.2.2 Tandem Switching shall accept connections (including the necessary signaling and trunking interconnections) between end offices, other tandems, IXCs, ICOs, CAPs and CLEC switches.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> VELOCITY and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>VELOCITY; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Xspedius and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Xspedius; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit ▇▇▇▇ sit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> IDS and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>IDS; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> BTI and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>BTI; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TR- TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> US LEC and BellSouth; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>US LEC; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Community and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Community; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Edge Connections and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Edge Connections; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NEW EDGE NETWORKS and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NEW EDGE NETWORKS; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Rhythms and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Rhythms; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Pilgrim and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Pilgrim; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NATIONSLINK COMMUNICATIONS and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NATIONSLINK COMMUNICATIONS; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> MRC and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>MRC; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Communication Services Integrated, Inc. and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Communication Services Integrated, Inc.; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> LCT and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>LCT; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> E-Z Access and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>E-Z Access; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> IDS and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>IDS; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Lightyear and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Lightyear; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> 1-800 RECONEX, Inc. and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>1-800 RECONEX, Inc.; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> E-Tel and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>E-Tel; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 11.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 11.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 11.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Sprint and BellSouth; 4.2.2.3 11.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 11.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Sprint; 4.2.2.5 11.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 11.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 11.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TR- TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> OptiLink and BellSouth; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>OptiLink; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> SouthEast and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>SouthEast; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Momentum Business Solutions and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Momentum Business Solutions; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> PowerNet and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>PowerNet; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> API and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>API; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> ▇▇▇▇▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Broadslate; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> ZNC and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>ZNC; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Metro FiberLink, Inc. and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Metro FiberLink, Inc.; 4.2.2.5 Tandem Switching shall provide all trunk interconnections interconnec tions discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> LINEDRIVE and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>LINEDRIVE; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Arrow and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Arrow; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> New Access and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>New Access; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TR- TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> US LEC and BellSouth; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>US LEC; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> API and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>API; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> ▇▇▇▇ Communications and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>▇▇▇▇ Communications; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TR- TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NationNET and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NationNET; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> ▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Wakul; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Preferred and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Preferred; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Navigator and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Navigator; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Sail NetWorks and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Sail NetWorks; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Global Crossing and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Global Crossing; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Choctaw and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Choctaw; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Choctaw and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Choctaw; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Knology and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Knology; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “"Network Interconnection” " section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Progressive and BellSouth; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Progressive; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> aXessa and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>aXessa; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities capabilit ies or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide provi de signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Actel and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Actel; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions solutio ns are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> EPB Telecommunications and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>EPB Telecommunications; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> CCI and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>CCI; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NewSouth and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NewSouth; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NTERA, INC. and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NTERA, INC.; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> U.S. South and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>U.S. South; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> LS-One and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>LS-One; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Communications Research TR-TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> NAS and BellSouth; 4.2.2.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>NAS; 4.2.2.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.

Technical Requirements. 9.2.1 Tandem Switching shall have the same capabilities or equivalent capabilities as those described in ▇▇▇▇ Bell Communications Research TR-TR- TSY-000540 Issue 2R2, Tandem Supplement, 6/1/90. The requirements for Tandem Switching include, but are not limited to the following: 4.2.2.1 9.4.2.1.1 Tandem Switching shall provide signaling to establish a tandem connection; 4.2.2.2 9.4.2.1.2 Tandem Switching will provide screening as jointly agreed to by <<customer_name>> Time ▇▇▇▇▇▇ and BellSouth▇▇▇▇▇▇▇▇▇; 4.2.2.3 9.4.2.1.3 Tandem Switching shall provide Advanced Intelligent Network triggers supporting AIN features where such routing is not available from the originating end office switch, to the extent such Tandem switch has such capability; 4.2.2.4 9.4.2.1.4 Tandem Switching shall provide access to Toll Free number portability database as designated by <<customer_name>>Time Warner; 4.2.2.5 9.4.2.1.5 Tandem Switching shall provide all trunk interconnections discussed under the “Network Interconnection” section (e.g., SS7, MF, DTMF, DialPulse, PRI-ISDN, DID, and CAMA-ANI (if appropriate for 911)); 4.2.2.6 9.4.2.1.6 Tandem Switching shall provide connectivity to PSAPs where 911 solutions are deployed and the tandem is used for 911; and 4.2.2.7 9.4.2.1.7 Where appropriate, Tandem Switching shall provide connectivity to transit traffic to and from other carriers.