Common use of TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES Clause in Contracts

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● California • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● California • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital PhotographsPhotographs • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final)

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● California • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Finaldraft and final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Finaldraft and final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● Submit the Final final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital PhotographsPhotographs Please see the attached Excel spreadsheet. RESOLUTION NO: ▇▇-▇▇▇▇-▇▇‌

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● ❖ Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● ❖ Technology verification testing, or application to a test bed program located in California. ● ❖ Legal services or licensing to secure necessary intellectual property to further develop the technology ● ❖ Market research, business plan development, and cost-performance modeling. ● ❖ Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Draft and Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Draft and Final) ● • High Quality Digital PhotographsPhotographs Please see the attached Excel spreadsheet. STATE OF CALIFORNIA STATE ENERGY RESOURCES‌

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre pre- and post post-technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and an explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● o The Draft Technology Transfer Plan (CEC CAM, Technical Advisory Committee and CA IOU (SCE focus) will include stakeholder webcasts to present technical and procedural findings to elevate to CPUC. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre pilot testing and post deployment demonstration technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- CEC-sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and an explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- CEC-sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● technology. • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. California ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital PhotographsPhotographs • Initial Fact Sheet (draft and final) • Final Project Fact Sheet (draft and final) • Presentation Materials (draft and final) • High Quality Digital Photographs • Technology/Knowledge Transfer Plan (draft and final) • Technology/Knowledge Transfer Report (draft and final) Please see the attached Excel spreadsheet. ▇▇▇▇▇ ENERGY RESOURCES CONSERVATION AND DEVELOPMENT COMMISSION‌

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● California • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Ensure that Technology Transfer Plan, Summary of TAC Comments, Technology Transfer Summary Report, and High Quality Digital Photographs do not include confidential information listed in Attachment C-1. • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will develop a plan to accelerate the commercial adoption of the technology being supported under this agreementEnduroPlus. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology technology. ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and an explanation why. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre pre- and post post-technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Quantify potential statewide benefits of widespread use of V2B as part of demand- side energy management program including customer and system costs and savings. • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary informationinformation and will include the potential statewide benefits calculated under the project. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● California • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Finaldraft and final) ● • Summary of TAC Comments ● Technology Transfer Summary Report • Project Case Study (Draft/Finaldraft and final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● technology. • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient Recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation explain why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high high-level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in the annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High High-Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre pre- and post post-technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least six (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre pre- and post post-technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- CEC-sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, testing or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient Recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs II. PROJECT SCHEDULE RESOLUTION NO: 21-0317-5g RESOLVED, that the State Energy Resources Conservation and Development Commission (CEC) adopts the staff CEQA findings contained in the Agreement or Amendment Request Form (as applicable); and RESOLVED, that the CEC approves Agreement EPC-20-018 with Skyven Technologies, Inc. for a $1,110,500 grant to build an artificial intelligence (AI) platform. The AI platform will help accelerate the time-consuming and expensive front-end engineering work needed for decarbonization projects in California's industrial sector and automatically evaluate and choose potential decarbonization measures that best fit an industrial facility. This project will build the front-end engineering AI platform and pilot test the AI with a goal to demonstrate a scalable business model that cut costs by a factor of ten; and FURTHER BE IT RESOLVED, that the Executive Director or his/her designee shall execute the same on behalf of the CEC.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient Recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with the Final Technology Transfer Plan and an explanation whywhy those comments should not be incorporated. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in the Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital PhotographsPhotographs Please see the attached Excel spreadsheet.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient Recipient will conduct to accelerate the successful commercial adoption of the technology. ● Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation whyan explanation. ● Submit the Final Technology Transfer Plan to the CAM for approval. ● Implement activities identified in the Final Technology Transfer Plan. ● Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● When directed by the CAM, develop presentation materials for an a CEC- sponsored conference/workshop(s) on the project. ● When directed by the CAM, participate in the annual EPIC symposium(s) sponsored by the CEC. ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● Technology Transfer Plan (Draft/Final) ● Summary of TAC Comments ● Technology Transfer Summary Report (Draft/Final) ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● Technology verification testing, or application to a test bed program located in California. ● Legal services or licensing to secure necessary intellectual property to further develop the technology ● Market research, business plan development, and cost-performance modeling. ● Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/Final) ● • Summary of TAC Comments ● • Technology Transfer Summary Report (Draft/Final) ● • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to conduct activities that will accelerate the commercial adoption of the technology being supported under this agreement. Eligible activities include, but are not limited to, the following: ● • Scale-up analysis including manufacturing analysis, independent design verification, and process improvement efforts. ● • Technology verification testing, or application to a test bed program located in California. ● • Legal services or licensing to secure necessary intellectual property to further develop the technology ● • Market research, business plan development, and cost-performance modeling. ● • Entry into an incubator or accelerator program located in California. ● • Develop and submit a Technology Transfer Plan (Draft/Final) that identifies the proposed activities the recipient Recipient will conduct to accelerate the successful commercial adoption of the technology. ● • Present the Draft Technology Transfer Plan to the TAC for feedback and comments. ● • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Technology Transfer Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. ● • Submit the Final Technology Transfer Plan to the CAM for approval. ● • Implement activities identified in Final Technology Transfer Plan. ● • Develop and submit a Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. ● • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. ● • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the CEC. ● • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. ● • Technology Transfer Plan (Draft/) (D701) • Final Technology Transfer Plan (Final) ● (D702) • Summary of TAC Comments ● (D703) • Technology Transfer Summary Report (Draft/) (D704) • Technology Transfer Summary Report (Final) ● (D705) • High Quality Digital PhotographsPhotographs (D706)