Common use of TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES Clause in Contracts

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the this project is captured and disseminated to so that similar efforts build on the range of professions that will be responsible for future deployments of this technology or similar technologieslessons learned. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o • An outline of the objectives, goals, and activities of the case study. o • The expected impact if that learning is applied to future deployments. • The organization that will be conducting the case study and the plan for conducting it. o • A list of professions and practitioners involved in the technology’s deployment. o • Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o • Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure conduct activities that will accelerate the technological learning that resulted from commercial adoption of the project is captured technology being supported under this agreement. Recommended activities include, but are not limited to, the following: • Scale-up and disseminated marketing analysis for product offering the bus exportable power across electric drive platforms by the bus OEM • Develop and market program results and benefits summaries targeted to the range various stakeholder groups including transit agencies, school districts, and emergency response communities • Develop guidance for deploying bidirectional charging with facility tie-ins for the purpose of professions that will be responsible providing resilient charge points for future deployments of this communities and emergency management agencies, including MTC. Guidance should include methods for siting, procurement, engineering and construction as well as potential sources for funding assistance • Evaluate technology or similar technologies. applicability for other medium- and heavy-duty truck markets • Establish a public database for tracking and locating resilient charge points across the country • Develop and submit a Project Case Study Technology Transfer Plan (Draft/Final) that outlines how identifies the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific proposed activities the recipient will take conduct to ensure accelerate the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results successful commercial adoption of the case studytechnology. • Present the Draft Project Case Study Technology Transfer Plan to the TAC for review feedback and commentcomments. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Technology Transfer Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Technology Transfer Plan to the CAM for approval. • Execute the Implement activities identified in Final Project Case Study Plan and develop Technology Transfer Plan. • Develop and submit a Project Case Study Technology Transfer Summary Report (Draft/Final) that includes high level summaries of the activities, results, and lessons learned of tasks performed relating to implementing the Final Technology Transfer Plan. This report should not include any proprietary information. • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Technology Transfer Plan (Draft/Final) • Summary of TAC Comments • Project Case Study Technology Transfer Summary Report (Draft/Final) • High Quality Digital PhotographsPhotographs Please see the attached Excel spreadsheet.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project demonstration(s) is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient Recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient Recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient Recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs V. PROJECT SCHEDULE

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project demonstration(s) is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final final Project Case Study Plan to the CAM for approval. • Execute the Final final Project Case Study Plan and develop and submit a Project Case Study (Draft/Finaldraft and final) • When directed by the CAM, develop presentation materials for an CEC- a CEC sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project demonstration(s) is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- Energy Commission- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CECEnergy Commission. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • ● Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • ● Present the Draft Project Case Study Plan to the TAC for review and comment. • ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • ● Submit the Final Project Case Study Plan to the CAM for approval. • ● Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • ● When directed by the CAM, participate in the annual EPIC symposium(s) sponsored by the California CEC. • ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • ● Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • ● Present the Draft Project Case Study Plan to the TAC for review and comment. • ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • ● Submit the Final Project Case Study Plan to the CAM for approval. • ● Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • ● Project Case Study Plan (Draft/Final) • ● Summary of TAC Comments • ● Project Case Study (Draft/Final) • ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the this project is captured and disseminated to so that similar efforts build on the range of professions that will be responsible for future deployments of this technology or similar technologieslessons learned. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioningorganization, and operation execution of the technology or system program being demonstratedfacilitated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The expected impact if that learning is applied to future programs. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technologyprogram’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the CALSEED-TAC for review and comment. • Develop and submit a Summary of CALSEED-TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o CALSEED-TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o CALSEED-TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • Research opportunities for presentations, awards, papers, and articles within relevant industries to promote the concepts of the project. • Participate in relevant industry conferences’ and tradeshows’ discussion of the project. • Develop a Market Transformation Plan identifying industry targets and relevant dates for submitting case study. • Identify and submit for third party certifications, including but not limited to: ILFI Zero Energy Certification and SEED Network certification. • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • Market Transformation Plan • High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Finaldraft and final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs.

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task is to ensure the technological learning that resulted from the project demonstration(s) is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • ● Develop and submit a an Initial Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. The Initial Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • ● Present the Draft Project Case Study Plan to the TAC for review and comment. • ● Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • ● Submit the Final Project Case Study Plan to the CAM for approval. • ● Execute the Final Project Case Study Plan and develop and submit a Project Case Study Report (Draft/Final) • ● When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • ● When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • ● Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • ● Project Case Study Plan (Draft/Final) • ● Summary of TAC Comments • ● Project Case Study Report (Draft/Final) • ● High Quality Digital Photographs

TECHNOLOGY/KNOWLEDGE TRANSFER ACTIVITIES. The goal of this task subtask is to ensure the technological learning that resulted from the project is captured and disseminated to the range of professions that will be responsible for future deployments of this technology or similar technologies. • Develop and submit a Project Case Study Plan (Draft/Final) that outlines how the Recipient will document the planning, construction, commissioning, and operation of the technology or system being demonstrated. Additionally, the plan will include a strategy for assessing the replicability and scalability of the fully developed project. The Project Case Study Plan should include: o An outline of the objectives, goals, and activities of the case study. o A strategy for pursuing policy and regulatory changes to incentivize carbon-free development, identifying: ▪ Barriers in existing State policies that currently inhibit carbon-free construction. ▪ Solutions for overcoming these barriers. ▪ Funding streams to promote construction of carbon-free, affordable development and to work with regulatory agencies on permit streamlining to assist with replicability. o The organization that will be conducting the case study and the plan for conducting it. o A list of professions and practitioners involved in the technology’s deployment. o Specific activities the recipient will take to ensure the learning that results from the project is disseminated to those professions and practitioners. o Presentations/webinars/training events to disseminate the results of the case study. • Present the Draft Project Case Study Plan to the TAC for review and comment. o Feedback to include a focus on the following areas: ▪ Green building policy; ▪ Sustainable building practices and energy efficiency; ▪ Affordable housing development and finance. o Feedback to include a list of potential activities to support the cohort’s recommendations (e.g., a coalition-building model to advocate for the adoption of policies that will further standardization and repetition to scale this type of development). • Develop and submit a Summary of TAC Comments that summarizes comments received from the TAC members on the Draft Project Case Study Plan. This document will identify: o TAC comments the recipient proposes to incorporate into the Final Technology Transfer Plan. o TAC comments the recipient does not propose to incorporate with and explanation why. • Submit the Final Project Case Study Plan to the CAM for approval. • Execute the Final Project Case Study Plan and develop and submit a Project Case Study (Draft/Final) • When directed by the CAM, develop presentation materials for an CEC- sponsored conference/workshop(s) on the project. • When directed by the CAM, participate in annual EPIC symposium(s) sponsored by the California CEC. • Provide at least (6) six High Quality Digital Photographs (minimum resolution of 1300x500 pixels in landscape ratio) of pre and post technology installation at the project sites or related project photographs. • Project Case Study Plan (Draft/Final) • Summary of TAC Comments • Project Case Study (Draft/Final) • High Quality Digital Photographs.