Test gas Sample Clauses

The "Test gas" clause defines the requirements and procedures for supplying, using, or handling gas specifically for testing purposes within a contract. Typically, this clause outlines the quality standards, quantities, and responsibilities for providing test gas, as well as the conditions under which it is to be delivered and used, such as during commissioning or equipment verification. Its core function is to ensure that all parties understand the expectations and obligations regarding test gas, thereby preventing disputes and ensuring that testing activities proceed smoothly and safely.
POPULAR SAMPLE Copied 1 times
Test gas. The gas supplied to the burner shall have a calorific value near 38 MJ/m3 (for example natural gas).
View SourceView Similar (15)
Test gas. Two mixtures of air and hydrogen gas: 3.0 per cent concentration (or less) of hydrogen in the air to verify function of the warning, and 4.0 per cent concentration (or less) of hydrogen in the air to verify the shut-down function. The proper concentrations are selected based on the recommendation (or the detector specification) by the manufacturer.
View SourceView Similar (7)
Test gas. The gas supplied to the burner shall have a calorific value of about Е/БСЕ/324 ) E/ECE/TRANS/505 ) ^ ^ Regulation No. 43 Annex 3 page 29 Dimensiona in milltmetros. Tolerances according to ISO 2768 E/ECE/324 ) E/ECE/TRANS/505)”®'' - Regulation No. 43 Annex 3 Dimensions in millimetres Figure 19 ; Example of section of lower U-frame design for wire support facility
View Source
Test gas. Prior to the BFG Delivery Date, ROUGE shall deliver to DIG such quantities of BFG as may be necessary for purposes of testing and start-up of the Project and
View Source

Related to Test gas

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • Delivery Point The delivery point is the point of delivery of the Power Product to the CAISO Controlled Grid (the “Delivery Point”). Seller shall provide and convey to Buyer the Power Product from the Generating Facility at the Delivery Point. Title to and risk of loss related to the Power Product transfer from Seller to Buyer at the Delivery Point.

  • Natural Gas 21.1 Subject to Article 21.2, the Indian domestic market shall have the first call on the utilisation of Natural Gas discovered and produced from the Contract Area. Accordingly, any proposal by the Contractor relating to Discovery and production of Natural Gas from the Contract Area shall be made in the context of the Government's policy for the utilisation of Natural Gas and shall take into account the objectives of the Government to develop its resources in the most efficient manner and to promote conservation measures. 21.2 The Contractor shall have the right to use Natural Gas produced from the Contract Area for the purpose of Petroleum Operations including reinjection for pressure maintenance in Oil Fields, gas lifting and captive power generation required for Petroleum Operations. 21.3 For the purpose of sales in the domestic market pursuant to this Article 21, the Contractor shall have freedom to market the Gas and sell its entitlement.

  • DELIVERY PRESSURE ▇▇▇▇▇▇ agrees to use due care and diligence to furnish gas hereunder at such uniform pressure as Seller may elect up to, but not exceeding 20 pounds per square inch gauge, and not less than 5 pounds per square inch gauge, at the "Point of Delivery". Buyer shall be responsible for the installation and operation of adequate safety equipment downstream of the Point of Delivery so as to relieve or control pressure variations within the limits described above that may, for any reason through malfunction of Seller's equipment or otherwise, occur on Buyer's side of the "Delivery Point".

  • Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).