Testing and Inspection Services Clause Samples

The Testing and Inspection Services clause outlines the requirements and procedures for examining materials, equipment, or work to ensure they meet specified standards and contract requirements. Typically, this clause details who is responsible for conducting inspections, the timing and frequency of tests, and the process for addressing any deficiencies discovered. Its core practical function is to ensure quality control and compliance, helping to identify and resolve issues early in the project to prevent defects and disputes.
Testing and Inspection Services. 3.3.1 Unless otherwise specified in the Contract Documents, the A/E shall apply for, secure, and pay for the costs of structural testing and special inspections under Chapter 17 of the Ohio Building Code; testing including geotechnical analysis, environmental testing and analysis, concrete, masonry, structural steel, reinforcing steel, welding, bolts, steel connections, HVAC systems and controls, plumbing and piping, air and water balancing and testing, or other testing; or approval required by Applicable Law.
View SourceView Similar (6)
Testing and Inspection Services. 1.11.1 Unless otherwise specified in the Contract Documents, the DB shall apply for, secure, and pay for the costs of structural testing and special inspections under Chapter 17 of the Ohio Building Code; testing including geotechnical analysis, environmental testing and analysis, concrete, masonry, structural steel, reinforcing steel, welding, bolts, steel connections, HVAC systems and controls, plumbing and piping, air and water balancing and testing, or other testing; or approval required by Applicable Law.
View SourceView Similar (2)
Testing and Inspection Services. A. The Owner or responsible party acting as the Owner’s agent shall employ and pay for specified services of an independent firm (agency) to perform testing and inspection. B. The independent firm will perform tests, inspections and other services specified in individual specification sections and as required by Contract documents. (1) Laboratory: Authorized to operate in State of California. (2) Laboratory Staff: Maintain full time registered Engineer on staff to review services. (3) Testing Equipment: Calibrated at reasonable intervals with devices of an accuracy traceable to National Bureau of Standards or accepted values of natural physical constants. C. Testing, inspections and source quality control may occur on or off project site. Perform off- site testing as required by Owner/Architect/Engineer. D. Reports will be submitted by independent firm to Owner/Architect/Engineer, in duplicate, indicating observations and results of tests and indicating compliance or non-compliance with Contract Documents. E. D-BE shall, cooperate with independent firm; furnish samples of materials, design mix, equipment, tools, storage, safe access, and assistance by incidental labor as requested. (1) Notify Owner and independent firm prior to expected time for operations requiring services. The notice shall specify the date on which D-BE intends to use the materials or equipment. The notice shall be provided so as to allow sufficient time to perform the tests. (2) Make arrangements with independent firm and pay for additional samples and tests required for D-BE's use.
View SourceView Similar (2)
Testing and Inspection Services. Geotechnical hazard report, except as indicated in Exhibit “A”.
View Source
Testing and Inspection Services. A. The County or responsible party acting as the County’s agent shall employ and pay for specified services of an independent firm (agency) to perform testing and inspection. B. The independent firm will perform tests, inspections and other services specified in individual specification sections and as required by Contract documents. (1) Laboratory: Authorized to operate in State of California. (2) Laboratory Staff: Maintain full time registered Engineer on staff to review services. (3) Testing Equipment: Calibrated at reasonable intervals with devices of an accuracy traceable to National Bureau of Standards or accepted values of natural physical constants. C. Testing, inspections and source quality control may occur on or off project site. Perform off- site testing as required by County/Architect/Engineer. D. Reports will be submitted by independent firm to County/Architect/Engineer, in duplicate, indicating observations and results of tests and indicating compliance or non-compliance with Contract Documents. E. D-BE shall, cooperate with independent firm; furnish samples of materials, design mix, equipment, tools, storage, safe access, and assistance by incidental labor as requested. (1) Notify County and independent firm prior to expected time for operations requiring services. The notice shall specify the date on which D-BE intends to use the materials or equipment. The notice shall be provided so as to allow sufficient time to perform the tests. (2) Make arrangements with independent firm and pay for additional samples and tests required for D-BE's use. F. Testing and employment of testing agency or laboratory shall not relieve D-BE of obligation to perform Work in accordance with requirements of Contract Documents. G. Re-testing or re-inspection required because of non-conformance to specified requirements shall be performed by same independent firm on instructions by County/Architect/Engineer. Payment for re-testing or re-inspection will be charged to D-BE by deducting testing charges from Contract Sum/Price. H. Agency Responsibilities: (1) Test samples of mixes submitted by D-BE. (2) Provide qualified personnel at site. Cooperate with County/Architect/Engineer and D-BE in performance of services. (3) Perform specified sampling and testing of products in accordance with specified standards. (4) Ascertain compliance of materials and mixes with requirements of Contract Documents. (5) Promptly notify County/Architect/Engineer and D-BE of observed irreg...
View Source
Testing and Inspection Services personalized sequencing of the healthy people’s genome information to provide information on disease risks, genetic disease judgments, drug sensitivity, etc, which aims to guide precise and scientific personalized medication, achieving goals such as dose optimization, enhanced therapeutic efficacy and reduced adverse drug reactions; and
View Source
Testing and Inspection Services. A. The Contractor will submit the name of an independent firm to the Design Agent for approval by the Owner, to perform the testing and inspection services. The Contractor shall pay for all the services required in the Base Bid as described in Attachment A. Contractor shall coordinate any Owner-authorized testing also described in Attachment A, to be paid for from Testing Allowance. B. The independent firm will perform the tests, inspections and other services specified in the individual specification Sections and as required by the Design Agent or its Consultants.
View Source

Related to Testing and Inspection Services

  • TESTING AND INSPECTION 29 6.1 Pre-Commercial Operation Date Testing and Modifications. 29

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Monitoring Services IDT staff shall, using methods that include face-to-face and other contacts with the member, monitor the services a member receives. This monitoring shall ensure that: a. The member receives the services and supports authorized, arranged for and coordinated by the IDT staff; b. The services and supports identified in the MCP as being provided by natural and community supports are being provided; and c. The quality of the services and supports received is adequate and still necessary to continue to meet the needs and preferences of the member and support the member’s outcomes identified in the MCP.

  • Maintenance and Inspection Consultant shall maintain complete and accurate records with respect to all costs and expenses incurred under this Agreement. All such records shall be clearly identifiable. Consultant shall allow a representative of City during normal business hours to examine, audit, and make transcripts or copies of such records and any other documents created pursuant to this Agreement. Consultant shall allow inspection of all work, data, documents, proceedings, and activities related to the Agreement for a period of three (3) years from the date of final payment under this Agreement.

  • Construction Services 3.1.1 Basic Construction Services. 3.1.2 Meetings and Schedule Updates.