TYPES OF INSPECTIONS Sample Clauses

The "Types of Inspections" clause defines the various categories or methods of inspections that may be conducted under an agreement. It typically outlines what kinds of inspections are permitted, such as visual checks, technical assessments, or third-party evaluations, and may specify when and how these inspections can take place. By clearly delineating the scope and nature of allowable inspections, this clause helps prevent disputes over inspection rights and ensures both parties understand their obligations and expectations regarding product or service quality verification.
TYPES OF INSPECTIONS. Please refer to the Minnesota Feedlot Inspection Checklist (Checklist) to learn more about a feedlot inspection. All inspections must be documented. Compliance Inspection is an onsite, full facility inspection during which all parts of the feedlot are inspected. When inspecting a site registered for >100 AU the nitrogen section of the Checklist must be filled out for the inspection to be complete. When entering an inspection of this type into Tempo select FE Compliance Inspection as the Compliance Evaluation Type and load applicable checklist. Construction Inspection is an onsite inspection completed at a feedlot site that is constructing. A construction inspection typically involves just inspecting the construction activity that is taking place and does not require inspection of other parts of the feedlot. When entering an inspection of this type into Tempo select FE Construction Inspection as the Compliance Evaluation Type and load applicable checklist. Complaint Inspection is an inspection conducted in response to a complaint. A complaint inspection typically involves just inspecting the portion of the feedlot, land application site, manure stockpile or other areas relating to the complaint and does not require inspection of any other area not directly related to the complaint. When entering an inspection of this type into Tempo select FE Complaint Inspection as the Compliance Evaluation Type. Stockpile Inspection is an onsite inspection conducted to inspect one or more stockpiles. A stockpile inspection typically involves just inspecting the portion of the feedlot relating to the stockpile(s) and does not require inspection of other parts of the feedlot. The stockpile section(s) of the Checklist must be filled out for the inspection to be complete. When entering an inspection of this type into Tempo select FE Stockpile Inspection as the Compliance Evaluation Type and load the applicable checklist portions. have received a notification of manure storage area closure and did not inspect the facility, follow the procedure for “How to enter Notification of Manure Storage Area Closure” located here: file://▇▇▇.▇▇▇▇▇.▇▇.▇▇/▇▇▇▇▇▇/▇▇▇▇▇/▇▇▇▇▇▇▇/ • Phosphorus Inspection is an inspection of the phosphorus portion of land application records that is conducted in conjunction with a compliance inspection of a site registered for > 300 AU. The phosphorus section of the Checklist must be filled out for the inspection to be complete. NOTE: The number of years of reco...
View SourceView Similar (5)
TYPES OF INSPECTIONS. FIRE FIGHTERS will be assigned to enforce the NYS-Fire Code and Property Maintenance Code and the City of Poughkeepsie Minimum Housing Code, and, in addition, FIRE FIGHTERS will respond to complaints received regarding conditions in buildings. FIRE FIGHTERS will be provided check-list form to enable the FIRE FIGHTERS to note other kinds of health and safety issues that they observe during inspections. The forms will be passed along to the Fire Inspection Bureau or Building Department division as appropriate.
View Source
TYPES OF INSPECTIONS. The CONSULTANT shall perform building, mechanical, electrical, plumbing and special inspections for the PROJECT to ensure compliance with the CITY’s adopted building codes, as the same may be amended during the term of this Contract.
View Source

Related to TYPES OF INSPECTIONS

  • Rights of Inspection In order to ensure that the Quality Standards are maintained, Licensor and its authorized agents and representatives shall have the right, but not the obligation, with prior notice to Licensee, to enter upon the premises of any office or facility operated by or for Licensee with respect to Sprint PCS Products and Services and Premium and Promotional Items at all reasonable times, to inspect, monitor and test in a reasonable manner facilities and equipment used to furnish Sprint PCS Products and Services and Premium and Promotional Items and, with prior written notice to Licensee, to inspect the books and records of Licensee in a manner that does not unreasonably interfere with the business and affairs of Licensee, all as they relate to the compliance with the Quality Standards maintained hereunder.

  • Tests and Inspections § 15.5.1 Tests, inspections and approvals of portions of the Work shall be made as required by the Design-Build Documents and by applicable laws, statutes, ordinances, codes, rules and regulations or lawful orders of public authorities. Unless otherwise provided, the Design-Builder shall make arrangements for such tests, inspections and approvals with an independent testing laboratory or entity acceptable to the Owner, or with the appropriate public authority, and shall bear all related costs of tests, inspections and approvals. The Design-Builder shall give the Owner timely notice of when and where tests and inspections are to be made so that the Owner may be present for such procedures. The Owner shall bear costs of (1) tests, inspections or approvals that do not become requirements until after bids are received or negotiations concluded, and (2) tests, inspections or approvals where building codes or applicable laws or regulations prohibit the Owner from delegating their cost to the Design-Builder. § 15.5.2 If the Owner determines that portions of the Work require additional testing, inspection or approval not included under Section 15.5.1, the Owner will instruct the Design-Builder to make arrangements for such additional testing, inspection or approval by an entity acceptable to the Owner, and the Design-Builder shall give timely notice to the Owner of when and where tests and inspections are to be made so that the Owner may be present for such procedures. Such costs, except as provided in Section 15.5.3, shall be at the Owner’s expense. § 15.5.3 If such procedures for testing, inspection or approval under Sections 15.5.1 and 15.5.2 reveal failure of the portions of the Work to comply with requirements established by the Design-Build Documents, all costs made necessary by such failure shall be at the Design-Builder’s expense. § 15.5.4 Required certificates of testing, inspection or approval shall, unless otherwise required by the Design-Build Documents, be secured by the Design-Builder and promptly delivered to the Owner. § 15.5.5 If the Owner is to observe tests, inspections or approvals required by the Design-Build Documents, the Owner will do so promptly and, where practicable, at the normal place of testing. § 15.5.6 Tests or inspections conducted pursuant to the Design-Build Documents shall be made promptly to avoid unreasonable delay in the Work.

  • Audits/Inspections Contractor agrees to permit the County’s Auditor-Controller or the Auditor- Controller’s authorized representative (including auditors from a private auditing firm hired by the County) access during normal working hours to all books, accounts, records, reports, files, financial records, supporting documentation, including payroll and accounts payable/receivable records, and other papers or property of Contractor for the purpose of auditing or inspecting any aspect of performance under this Contract. The inspection and/or audit will be confined to those matters connected with the performance of the Contract including, but not limited to, the costs of administering the Contract. The County will provide reasonable notice of such an audit or inspection. The County reserves the right to audit and verify the Contractor’s records before final payment is made. Contractor agrees to maintain such records for possible audit for a minimum of three years after final payment, unless a longer period of records retention is stipulated under this Contract or by law. Contractor agrees to allow interviews of any employees or others who might reasonably have information related to such records. Further, Contractor agrees to include a similar right to the County to audit records and interview staff of any subcontractor related to performance of this Contract. Should the Contractor cease to exist as a legal entity, the Contractor’s records pertaining to this Contract shall be forwarded to the County’s project manager.

  • Regulatory Inspections Manufacturer will permit Rhythm or its agents to be present and participate in any visit or inspection by any Authority of the Facility (to the extent it relates in any way to any Product) or the Manufacturing Process. Manufacturer will give as much advance notice as reasonably possible to Rhythm of any such visit or inspection. Manufacturer will provide Rhythm with a copy of any report or other written communication * CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. received from such Authority in connection with such visit or inspection, and any written communication received from any Authority relating to any Product, the Facility (if it relates to or affects the Development and/or Manufacture of Product) or the Manufacturing Process, within two (2) business days after receipt, and will consult with, and require approval from, Rhythm before responding to each such communication. Manufacturer will provide Rhythm with a copy of its final responses within five (5) business days after submission.

  • Response/Compliance with Audit or Inspection Findings A. Grantee must act to ensure its and its Subcontractors’ compliance with all corrections necessary to address any finding of noncompliance with any law, regulation, audit requirement, or generally accepted accounting principle, or any other deficiency identified in any audit, review, inspection or investigation of the Grant Agreement and the services and Deliverables provided. Any such correction will be at Grantee’s or its Subcontractor's sole expense. Whether ▇▇▇▇▇▇▇'s action corrects the noncompliance shall be solely the decision of the System Agency. B. As part of the services, Grantee must provide to HHS upon request a copy of those portions of Grantee's and its Subcontractors' internal audit reports relating to the services and Deliverables provided to the State under the Grant Agreement. C. Grantee shall include the requirement to provide to System Agency (and any of its duly authorized federal, state, or local authorities) internal audit reports related to this Grant Agreement in any Subcontract it awards. Upon request by System Agency, Grantee shall enforce this requirement against its Subcontractor. Further, Grantee shall include in any Subcontract it awards a requirement that all Subcontractor Subcontracts must also include these provisions.