Vehicle load. The vehicle is in running order as defined in the consolidated Resolution on the Construction of vehicles (R.E.3) (ECE/TRANS/WP.29/78/Rev.6, paragraph 2.2.5.4.), plus for M1 and N1 vehicles one front seat passenger (75 kg)." Paragraph 2.1., amend to read: 2.1. Test conditions (a) The vehicle shall be left in a parked parking status until it is ensured that all electronic systems are de-activated; or for a minimum of 30 minutes. (b) It is permissible for the test person or equipment to be already situated within the vehicle. (c) Ensure the vehicle gear selector is not in reverse gear. (d) The test may start with opening the driver door. Once the door is opened, it shall be closed again." Paragraph 3.2., amend to read: 3.2. Extract photographic data. (a) Using the photograph, measure the apparent length, of a 50 mm delineated section of the in-photo ruler, along the ruler's edge, closest to the rear-view image and at a point near the horizontal centre of the rear-view image. (b) Using the photograph, measure the horizontal width of the upper portion of each of the three test objects located at positions G, H, and I in Figure B. (c) Define the measured horizontal widths of the three test objects as dG, dH, and dI. " Annex 10 Paragraph 1., amend to read:
Appears in 2 contracts
Sources: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles