CONTRACTOR NAME CHANGE An amendment is required to change the Contractor's name as listed on this Agreement. Upon receipt of legal documentation of the name change the State will process the amendment. Payment of invoices presented with a new name cannot be paid prior to approval of said amendment.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.
2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Makeup (LMU) process is not required to order and provision the UCL-ND. However, CBX One-Stop can request LMU for which additional charges would apply.
2.4.3.3 For an additional charge, BellSouth also will make available Loop Testing so that CBX One-Stop may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit A of this Attachment.
2.4.3.4 UCL-ND Loops are not intended to support any particular service and may be utilized by CBX One-Stop to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. The UCL- ND will include a NID at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire.
2.4.3.5 OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. OC-TS does not apply to this product.
2.4.3.6 CBX One-Stop may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.
Appointment of Key Sub-Contractors The Authority and the Customer have consented to the engagement of the Key Sub-Contractors listed in DMP Schedule 7 (Key Sub-Contractors). Where the Supplier wishes to enter into a new Key Sub-Contract or replace a Key Sub-Contractor, it must obtain the prior written consent of the Authority and the Customer (the decision to consent or otherwise not to be unreasonably withheld or delayed). The Authority and/or the Customer may reasonably withhold its consent to the appointment of a Key Sub-Contractor if any of them considers that: the appointment of a proposed Key Sub-Contractor may prejudice the provision of the Goods and/or Services or may be contrary to its interests; the proposed Key Sub-Contractor is unreliable and/or has not provided reliable goods and/or reasonable services to its other customers; and/or the proposed Key Sub-Contractor employs unfit persons. Except where the Authority and the Customer have given their prior written consent under Clause18.7, the Supplier shall ensure that each Key Sub-Contract shall include: provisions which will enable the Supplier to discharge its obligations under this Contract; a right under CRTPA for the Customer to enforce any provisions under the Key Sub-Contract which confer a benefit upon the Customer; a provision enabling the Customer to enforce the Key Sub-Contract as if it were the Supplier; a provision enabling the Supplier to assign, novate or otherwise transfer any of its rights and/or obligations under the Key Sub-Contract to the Customer or any Replacement Supplier; obligations no less onerous on the Key Sub-Contractor than those imposed on the Supplier under this Contract in respect of: data protection requirements set out in Clauses 23.1 (Security Requirements), 23.2 to 23.9 (Protection of Customer Data) and 23.25 to 23.39 (Data Protection ); FOIA requirements set out in Clause 23.23 to 23.24 (Freedom of Information); the keeping of records in respect of the Goods and/or Services being provided under the Key Sub-Contract, including the maintenance of Open Book Data; the conduct of audits set out in Clause 12 (Records, Audit Access & Open Book Data); provisions enabling the Supplier to terminate the Key Sub-Contract on notice on terms no more onerous on the Supplier than those imposed on the Customer under Clauses 30 (Customer Termination Rights), 32 (Termination by Either Party) and 34 (Consequences of Expiry or Termination) of this Contract; a provision restricting the ability of the Key Sub-Contractor to Sub-Contract all or any part of the provision of the Goods and/or Services provided to the Supplier under the Sub-Contract without first seeking the written consent of the Customer; a provision, where a provision in Contract Schedule 5 (Staff Transfer) imposes an obligation on the Supplier to provide an indemnity, undertaking or warranty, requiring the Key Sub-Contractor to provide such indemnity, undertaking or warranty to the Customer, Former Supplier or the Replacement Supplier as the case may be. The Supplier shall ensure that all Sub-Contracts contain a provision: requiring the Supplier to pay any undisputed sums which are due from it to the Sub-Contractor within a specified period not exceeding thirty (30) days from the receipt of a Valid Invoice; requiring that any invoices submitted by a Sub-Contractor shall be considered and verified by the Supplier in a timely fashion and that undue delay in doing so shall not be sufficient justification for failing to regard an invoice as valid and undisputed; requiring the Sub-Contractor to include in any Sub-Contract which it in turn awards suitable provisions to impose, as between the parties to that Sub-Contract, requirements to the same effect as those required by sub-clauses (a) and (b) directly above; and conferring a right to the Customer to publish the Suppliers compliance with its obligation to pay undisputed invoices within the specified payment period. The Supplier shall: pay undisputed sums which are due from it to a Sub-Contractor within thirty (30) days from the receipt of a Valid Invoice; Provide a summary of its compliance with this Clause 18.11a), such data to be certified each quarter by a director of the Supplier as being accurate and not misleading. Any invoices submitted by a Sub-Contractor to the Supplier shall be considered and verified by the Supplier in a timely fashion. Undue delay in doing so shall not be sufficient justification for the Supplier failing to regard an invoice as valid and undisputed. Notwithstanding any provision of Clauses 23.10 to 23.18 (Confidentiality) and 24 (Publicity and Branding) if the Supplier notifies the Customer that the Supplier has failed to pay an undisputed Sub-Contractor’s invoice within thirty (30) days of receipt, or the Customer otherwise discovers the same, the Customer shall be entitled to publish the details of the late or non-payment (including on government websites and in the press).
Vendor’s Resellers as Related to This Agreement Vendor’s Named Resellers (“Resellers”) under this Agreement shall comply with all terms and conditions of this agreement and all addenda or incorporated documents. All actions related to sales by Authorized Vendor’s Resellers under this Agreement are the responsibility of the awarded Vendor. If Resellers fail to report sales to TIPS under your Agreement, the awarded Vendor is responsible for their contractual failures and shall be billed for the fees. The awarded Vendor may then recover the fees from their named reseller. If there is a dispute between the awarded Vendor and TIPS Member, TIPS or its representatives may, at TIPS sole discretion, assist in conflict resolution if requested by either party. TIPS, or its representatives, reserves the right to inspect any project and audit the awarded Vendor’s TIPS project files, documentation and correspondence related to the requesting TIPS Member’s order. If there are confidentiality requirements by either party, TIPS shall comply to the extent permitted by law. The TIPS Solicitation which resulted in this Vendor Agreement, whether a Request for Proposals, the Request for Competitive Sealed Proposals or Request for Qualifications solicitation, or other, the Vendor’s response to same and all associated documents and forms made part of the solicitation process, including any addenda, are hereby incorporated by reference into this Agreement as if copied verbatim. THE SECTON HEADERS OR TITLES WITHIN THIS DOCUMENT ARE MERELY GUIDES FOR CONVENIENCE AND ARE NOT FOR CLASSIFICATION OR LIMITING OF THE RESPONSIBILITES OF THE PARTIES TO THIS DOCUMENT. Texas governmental entities are prohibited from doing business with companies that fail to certify to this condition as required by Texas Government Code Sec. 2270. By executing this agreement, you certify that you are authorized to bind the undersigned Vendor and that your company (1) does not boycott Israel; and (2) will not boycott Israel during the term of the Agreement. You certify that your company is not listed on and does not and will not do business with companies that are on the Texas Comptroller of Public Accounts list of Designated Foreign Terrorists Organizations per Texas Gov't Code 2270.0153 found at ▇▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇.▇▇▇▇▇.▇▇▇/purchasing/docs/foreign-terrorist.pdf You certify that if the certified statements above become untrue at any time during the life of this Agreement that the Vendor will notify TIPS within three (3) business day of the change by a letter on Vendor’s letterhead from and signed by an authorized representative of the Vendor stating the non-compliance decision and the TIPS Agreement number and description at: Attention: General Counsel ESC Region 8/The Interlocal Purchasing System (TIPS) ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇, ▇▇,▇▇▇▇▇ And by an email sent to ▇▇▇▇@▇▇▇▇-▇▇▇.▇▇▇ The undersigned Vendor agrees to maintain the below minimum insurance requirements for TIPS Contract Holders: When the Vendor or its subcontractors are liable for any damages or claims, the Vendor’s policy, when the Vendor is responsible for the claim, must be primary over any other valid and collectible insurance carried by the Member. Any immunity available to TIPS or TIPS Members shall not be used as a defense by the contractor's insurance policy. The coverages and limits are to be considered minimum requirements and in no way limit the liability of the Vendor(s). Insurance shall be written by a carrier with an A-; VII or better rating in accordance with current A.M. Best Key Rating Guide. Only deductibles applicable to property damage are acceptable, unless proof of retention funds to cover said deductibles is provided. "Claims made" policies will not be accepted. Vendor’s required minimum coverage shall not be suspended, voided, cancelled, non-renewed or reduced in coverage or in limits unless replaced by a policy that provides the minimum required coverage except after thirty (30) days prior written notice by certified mail, return receipt requested has been given to TIPS or the TIPS Member if a project or pending delivery of an order is ongoing. Upon request, certified copies of all insurance policies shall be furnished to the TIPS or the TIPS Member. • Orders: All Vendor orders received from TIPS Members must be emailed to TIPS at tipspo@tips- ▇▇▇.▇▇▇. Should a TIPS Member send an order directly to the Vendor, it is the Vendor’s responsibility to forward a copy of the order to TIPS at the email above within 3 business days and confirm its receipt with TIPS. • Vendor Encouraging Members to bypass TIPS agreement: Encouraging TIPS Members to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program. • Order Confirmation: All TIPS Member Agreement orders are approved daily by TIPS and sent to the Vendor. The Vendor should confirm receipt of orders to the TIPS Member (customer) within 3 business days. • Vendor custom website for TIPS: If Vendor is hosting a custom TIPS website, updated pricing when effective. TIPS shall be notified when prices change in accordance with the award.
Foreign-Owned Companies in Connection with Critical Infrastructure If Texas Government Code, Section 2274.0102(a)(1) (eff. Sept. 1, 2023, Section 2275.0102(a)(1), pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.) (relating to prohibition on contracts with certain foreign-owned companies in connection with critical infrastructure) is applicable to this Contract, pursuant to Government Code Section 2274.0102 (eff. Sept. 1, 2023, Section 2275.0102, pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.), Contractor certifies that neither it nor its parent company, nor any affiliate of Contractor or its parent company, is: (1) majority owned or controlled by citizens or governmental entities of China, Iran, North Korea, Russia, or any other country designated by the Governor under Government Code Section 2274.0103 (eff. Sept. 1, 2023, Section 2275.0103, pursuant to House Bill 4595, Acts 2023, 88th Leg., R.S.), or (2) headquartered in any of those countries.