Common use of Vertical orientation Clause in Contracts

Vertical orientation. 6.3.6.1.1. In the case of class "B" front fog lamps the vertical inclination of the cut-off to be set in the unladen vehicle state with one person in the driver's seat shall be -1.5 per cent or lower. */ 6.3.6.1.2. In the case of class "F3" front fog lamps: 6.3.6.1.2.1. the initial downward inclination of the cut-off to be set in the unladen vehicle state with one person in the driver' s seat shall be specified within an accuracy of one decimal place by the manufacturer and indicated in a clearly legible and indelible manner on each vehicle close to either the front fog lamp or the manufacturer's plate or in combination with the indication referred to in paragraph 6. 2.6.1.1. by the symbol shown in Annex 7 to this Regulation. The value of this indicated downward inclination shall be defined in accordance with paragraph 6.3.6.1.2.2. 6.3.6.1.2.2. depending on the mounting height in metre (h) of the lower edge of the apparent surface in the direction of the reference axis of the front fog lamp, measured on the unladen vehicles, the vertical inclination of the cut-off to be set in the unladen vehicle state with one person in the driver's seat shall have the following value(s): h ≤ 0.8 Limits: between -1.0 per cent and -2.5 per cent Initial aiming: between -1.5 per cent and -2.0 per cent h > 0.8 Limits: between -1.5 per cent and –3.0 per cent Initial aiming: between –2.0 per cent and -2.5 per cent