Wall Systems Sample Clauses

The 'Wall Systems' clause defines the requirements and specifications for the construction, installation, or maintenance of wall assemblies within a project. It typically outlines the types of materials to be used, performance standards such as fire resistance or sound insulation, and any relevant design or structural criteria. For example, it may specify that exterior walls must meet certain energy efficiency ratings or that interior partitions use specific framing methods. The core function of this clause is to ensure that all wall systems meet the necessary safety, durability, and performance standards, thereby reducing the risk of defects and ensuring compliance with building codes.
Wall Systems. All interior walls, except restrooms, shall be painted or vinyl covered drywall or field applied vinyl covered 5/8” gypsum board. Vinyl fabric shall be medium weight, textured, wall covering with stain resistant surface coatings. 4” vinyl base shall be applied to all walls. Metal studs, floor and ceiling track shall be 20 gauge galvanized steel spaced at 16” O.C. (24” O.C. not acceptable). Gypsum board fasteners shall be drywall screws not less than 1 – ¼” long. Painted surfaces shall receive 1 coat of primer and 2 coats of finish. A complete room finish schedule shall be submitted for approval by the Lessee prior to construction. Colors shall be selected by the State.
View SourceView Similar (21)
Wall Systems. All interior walls, except restrooms, shall be painted or field applied vinyl covered 5/8" gypsum board. Vinyl fabric shall be medium weight, textured, wall covering with stain resistant surface coatings. 4" vinyl base shall be applied to all walls. Metal studs, floor and ceiling track shall be 20 gauge galvanized steel spaced at 16" o.c. (24" o.c. not acceptable). Gypsum board fasteners shall be drywall screws not less than 1¼” long. Painted surfaces shall receive 1 coat of primer and 2 coats of finish. A complete room finish schedule shall be submitted for approval by the Lessee prior to construction. Colors shall be selected by the Lessee. Provide clear plastic guards up to 48” a.f.f. on all interior outside corners to protect vinyl wall covering. Exterior wall insulation is to be covered from floor to roof deck with ½" gypsum board. Gypsum board above the acoustic ceiling line may be unfinished. Walls in restrooms shall be finished with glazed wall tile extending from floor to 60" a.f.f. Tile shall be standard grade meeting ANSI 137.1.
View SourceView Similar (3)
Wall Systems. All interior walls, except restrooms, shall be 5/8" gypsum board. 4" vinyl base shall be applied to all walls. Metal studs, floor and ceiling track shall be 20 gauge galvanized steel. Painted surfaces shall receive one coat of primer and two coats of finish. A complete room finish schedule shall be submitted for approval by the Lessee prior to construction. Colors shall be selected by the Lessee.
View SourceView Similar (2)
Wall Systems. All interior walls, except restrooms, shall be painted or vinyl covered drywall or field applied vinyl covered 5/8” gypsum board. Vinyl fabric shall be medium weight, textured, wall covering with stain resistant surface coatings. 4” vinyl base shall be applied to all walls. Metal studs, floor and ceiling track shall be 20 gauge galvanized steel spaced at 16” O.C. (24” O.C. not acceptable). Gypsum board fasteners shall be drywall screws not less than 1 – ¼” long. Painted surfaces shall receive 1 coat of primer and 2 coats of finish. A complete room finish schedule shall be submitted for approval by the Lessee prior to construction. Colors shall be selected by the State. Provide clear plastic guards up to 60” AFF on all outside corners to protect vinyl wall covering. Gypsum board allowance: provide 1 linear foot of gypsum drywall board partition (finished on each side) for each 25 square feet of space rented referenced in Article I of the Lease.
View Source
Wall Systems. THE PROJECT The Project for which the Work under the Contract Documents may be the whole or only a part is generally described as follows:
View Source

Related to Wall Systems

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.

  • Systems The Servicer covenants that at the date hereof in respect of the software which is used by the Servicer in providing the Services, it shall for the duration of this Agreement:

  • Infrastructure Modification of the location and/or sizing of the infrastructure for the Project that does not materially change the functionality of the infrastructure.

  • Computer Systems (a) Servicer to operate systems (b) Servicer to maintain back-up facilities (c) Servicer to notify location of computer tapes

  • Building Systems “Building Systems” shall mean all structural elements and components, mechanical equipment, plumbing systems, electrical systems and life safety systems and fixtures incorporated in the Improvements, including, without limitation, HVAC, elevator, electrical, plumbing, utility, fire and life safety and swimming pool.