Walls Clause Samples
POPULAR SAMPLE Copied 40 times
Walls. (a) All new interior walls to be taped, bedded, textured and painted. Existing walls to be repainted or cleaned to a like new condition. Color to be selected by occupying agency.
(b) Provide ceramic tiles in Restrooms and Shower Room if applicable.
(c) New demising walls shall be full height to structural deck with insulation and fire caulking at all penetrations.
Walls. The external walls of the building be 200/ 125 mm thick brick and partition wall inside the flats shall be of 75 mm and 125 mm thick. Both to be bounded with cement mortar.
Walls. Sheetrock (drywall) damage should be patched and fire-taped so that there are no holes in either office or warehouse.
Walls. All external walls shall be 200 mm brick with cement plaster as per sanctioned Plan. All internal partition walls will be 75 mm to 125 mm thick with both side plaster. All inside wall will be coated with best quality plaster of Paris or wall care putty.
Walls. No nails, wall anchor, screws or adhesive hangers except standard picture hooks, shade brackets and curtain rod brackets may be placed in walls, woodwork or any part of Premises.
Walls. Nails longer than one inch in length, or screws of any kind, cannot be used in walls of a Unit. No TVs may be mounted to the wall. No wallpaper, contact paper, or other decorative covering or finish may be applied to the walls. No change will be made to the type or color of the paint within the Unit. No stenciling or decals are permitted.
Walls. 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.
Walls. Contractor shall furnish and install expansion anchors and, if necessary, bracket adapter plate. Bracket, or bracket and adapter plate shall be placed in position on wall and secured to expansion anchors by stainless steel bolts.
Walls a. Putty will be given in the inside wall.
b. Attractive external finish with best quality cement paint.
Walls. External walls to be partly glazed unitised façade system - or such other plans as may be approved by the Council. Internal walls to be exposed concrete / white painted metal stud plasterboard, with appropriate acoustic / fire separation to other adjacent spaces / occupiers.