Wet Mopping Clause Samples

POPULAR SAMPLE Copied 4 times
Wet Mopping. The floors shall be properly prepared, and thoroughly swept to remove visible dirt and debris; this includes removal of wads of gum, tar, and similar substances from the floor surface. On completion of the mopping and scrubbing, the floors shall be clean and free of dirt, water streaks, mop marks, string, etc. Floors shall be properly rinsed and dry mopped to represent an overall appearance of cleanliness. All surfaces shall be dry and corners and cracks clean after wet mopping or scrubbing.
View SourceView Similar (2)
Wet Mopping. Thoroughly cleaning hard floor surfaces after sweeping or dust mopping, utilizing clean water and an all-purpose detergent solution (and disinfectant where required by the Contract Scope of Work).
View SourceView Similar (13)
Wet Mopping. Floors must be damp mopped and buffed between regular waxing operations. Prepare the floor by sweeping to remove all visible dirt and debris. The floor area will then be damp mopped and machine buffed to a polished appearance with a high-speed buffer.
View SourceView Similar (4)
Wet Mopping. Thoroughly cleaning hard floor surfaces after sweeping or dust mopping, utilizing clean water and an all-purpose detergent solution and disinfectant where required. Services shall be listed per Contract as the County requires, per location.
View SourceView Similar (2)
Wet Mopping. Wet mopping is defined as the removal of built up dirt, soil, liquids or other foreign materials from a floor using a cotton or similar yarn type mop and sufficient neutral detergent and water solution or neutral disinfecting detergent and water solution. This will include rinsing if required or recommended by the detergent manufacturer. Standard: When properly completed a wet mopped floor will be free of all dirt, debris soil, liquids or other foreign material. It will present a uniform appearance free of streaks smudges, heel-marks or any other marks which can be reasonably removed through this cleaning method. All splash marks/spots on walls and furniture/fixtures must be removed or the proper completion of the wet mopping task. All items moved to accomplish this task will be returned to their original positions.
View SourceView Similar (2)
Wet Mopping. As needed – Extreme care shall be used in all mopping to avoid splashing on walls or furniture. Moving water and other liquids over carpeted areas will be done in a manner to avoid spillage.
View Source

Related to Wet Mopping

  • Dewatering (a) Where the whole of a site is so affected by surface water following a period of rain that all productive work is suspended by agreement of the Parties, then dewatering shall proceed as above with Employees so engaged being paid at penalty rates as is the case for safety rectification work. This work is typically performed by Employees engaged within CW1, CW2 or CW3 classifications. When other Employees are undertaking productive work in an area or areas not so affected then dewatering will only attract single time rates. (b) Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, appropriate Employees shall assist in the tidying up of their own work site or area if it is so affected. Where required, appropriate Employees will be provided with the appropriate PPE. Such work to be paid at single time rates. Productive work will continue in areas not so affected. (c) To avoid any confusion any ‘dewatering’ time which prevents an Employee from being engaged in their normal productive work is not included in any calculation for the purposes of determining whether an Employee is entitled to go home due to wet weather (refer clauses 32.4 and 32.5)

  • Access Toll Connecting Trunk Group Architecture 8.2.1 If Reconex chooses to subtend a Verizon access Tandem, Reconex’s NPA/NXX must be assigned by Reconex to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center subtends as identified in the LERG. 8.2.2 Reconex shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from Reconex’s Customers. 8.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office Reconex utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the Tandem Verizon utilizes to provide Exchange Access in such LATA. 8.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow Reconex’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access tandem.

  • TOOL STORAGE 1. A company shall provide on all construction jobs in towns and cities, and elsewhere where reasonably necessary and practicable (or if requested buy the employee), a suitable and secure waterproof lock-up solely for the purpose of storing employees’ tools, and on multi-storey and major projects the company shall provide, where possible, a suitable lock-up for employees’ tools within a reasonable distance of the work area of large groups of employees. 2. Where an employee is absent from work because of illness or accident and has advised the company in accordance with Clause 33 – Personal Leave of the award, the company shall ensure that the employee’s tools are securely stored during his/her absence.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.