1
EXHIBIT 10.12
Certain portions of this exhibit have been deleted and confidentially filed
with the Securities and Exchange Commission pursuant to a confidential treatment
request under Rule 406 under the Securities Act of 1933, as amended. The
confidential portions of the exhibit that have been deleted are indicated by
"[***]" inserted in place of such confidential information. In addition, all
exhibits to this exhibit have been deleted and confidentially filed with the
Securities and Exchange Commission.
SUPPLY AGREEMENT
BETWEEN
SIMCALA, INC.
AND
DOW CORNING CORPORATION
2
PREAMBLE
SIMCALA and Dow Corning Corporation understand the need for continuous
"real" cost improvement. ▇▇▇▇▇▇▇ understands that Dow Corning Corporation is
entering into this contract with the intent to purchase silicon metal between
January 1, 1998, and December 31, 2004, with convincing evidence that in so
doing, Dow Corning Corporation will have significantly higher value through
lower costs, better quality, and consistent reliability of supply for the life
of the contract than it would have with short term and/or level volume supplier
arrangements. SIMCALA gains a committed long-term customer who intends to
provide consistent and dependable long-term growth. SIMCALA and Dow Corning
Corporation are committed to working together towards continuous improvement of
value in terms of the cost, price, quality, productivity, and service related to
the production and use of silicon metal. Both parties agree that the key to the
success of this contract is not in mechanics but in mutual trust that these
commitments to continuous improvement will be fully implemented.
3
SUPPLY AGREEMENT
THIS SUPPLY AGREEMENT (hereinafter "Agreement") is made and entered
into as of the 1st day of January, 1998 by and between SIMCALA, INC., a Delaware
Corporation located in Montgomery, Alabama (hereinafter "Seller") and DOW
CORNING CORPORATION, a Michigan Corporation with headquarters in Midland,
Michigan (hereinafter "Buyer").
WHEREAS, Seller is a producer of silicon metal at its Montgomery,
Alabama plant and is presently producing silicon metal sold to Buyer by Seller;
and
WHEREAS, Seller and Buyer desire to enter into this Agreement to
provide for the sale and purchase of silicon metal and further cooperation
between Seller and Buyer to extend the continuous improvement in cost, quality
and performance of the product; and
WHEREAS, in entering into this Agreement, it is intended that Seller
will continue to have a committed long term customer and the opportunity to
enjoy consistent long term growth; and
WHEREAS, ▇▇▇▇▇'s aim in entering into this Agreement is to keep its
assured long term supply of silicon metal for the life of the Agreement and its
ongoing opportunity to lower costs and obtain better quality; and
WHEREAS, both Seller and ▇▇▇▇▇ remain committed to continually working
toward continuous improvement in cost, price, quality and service regarding the
sale and purchase of silicon metal, and the parties agree that the key to a
successful Agreement is still mutual trust and commitment to continuous
improvement; and
WHEREAS, the sale of silicon metal and the productivity improvement
sharing shall be carried out under and subject to the terms and conditions set
forth hereinafter and if appropriate in a separate sub-agreement(s) as needed;
NOW, THEREFORE, ▇▇▇▇▇▇ agrees to sell to ▇▇▇▇▇, and ▇▇▇▇▇ agrees to
purchase from Seller, silicon metal under and subject to the following terms and
conditions:
1. Effective Date. This Agreement shall become effective January 1,
1998.
2. Cooperation and Sharing. ▇▇▇▇▇▇ and ▇▇▇▇▇ agree to use their best
efforts to work together to generate productivity improvements resulting in cost
savings and product performance opportunities. Both Seller and ▇▇▇▇▇ understand
the need for cooperation in order to obtain this goal and agree to take
commercially acceptable action, including appointing members to quality
technical teams for handling various subjects, in order to pursue the goal.
Seller and ▇▇▇▇▇ agree that the appointed teams will meet at least twice per
year and discuss such opportunities. All such opportunities that require a
change in specifications must be real and measurable, and the measurements
involved must
4
take account of the effect on both Seller and ▇▇▇▇▇. Cost savings opportunities
shall be shared equitably by Seller and Buyer net of any capital investments
required. Seller and Buyer intend to enter into separate written sub-agreements
which will set forth their mutual intentions and agreements regarding each such
opportunity and necessary capital investments.
When cooperation generates productivity improvements, the resultant
cost savings shall be reflected in the annual price adjustment provided for
under Exhibit A. In addition to the annual price changes pursuant to Exhibit A,
the price may be adjusted to reflect cost savings through the Formula Price
Adjustment as hereinafter defined in Exhibit B. Mutually developed and approved
cost savings opportunities can be implemented at any time during a "Calendar
Year" which term, as used in this Supply Agreement, shall mean a twelve (12)
month period from January 1 to December 31. The cost savings idea shall be
evaluated for a period of not less than six (6) months following its
implementation, during which time the real and measurable savings will be
verified. Such savings shall be shared equitably between Buyer and Seller. A
Formula Price Adjustment can be made to the actual price then in effect
following the six (6) month evaluation period.
During the six (6) month evaluation period, ▇▇▇▇▇ and Seller will
monitor and review monthly performance of the cost savings idea. Once such a
Formula Price Adjustment has been made to the actual price, Buyer and Seller may
discontinue all or part of any cost savings practice by mutual agreement set
forth in a written termination agreement which shall state the reasons for such
discontinuance. If Buyer and Seller agree to discontinue a cost saving practice,
the actual price will be readjusted, as appropriate, beginning with the month
following that month during which the cost savings practice is discontinued.
3. Quantity. Seller agrees to sell and deliver to Buyer, and ▇▇▇▇▇
agrees to purchase and receive from Seller, a minimum quantity of silicon metal
of [***] metric tonnes during the initial three (3) Calendar Years set forth on
Exhibit D hereto (the "3 Year Minimum"). Seller and Buyer agree that the
quantity that Buyer is required to purchase from Seller for any single Calendar
Year during such initial three year period shall be at least equal, but not
limited to, [**********] which comply with the Buyer's specifications as given
in Exhibit C of this Agreement. In any case the minimum tonnage in any such
Calendar Year supplied by Seller to Buyer shall not be less than [***] metric
tons. [********] conforming to the specification in Exhibit C or other
specifications as mutually agreed between the parties.
During each three (3) Calendar Year period ending December 31 in each
of the years 2001 and thereafter during the term hereof, Seller shall sell and
deliver to Buyer, and Buyer shall purchase and receive from Seller, a quantity
of silicon metal which complies with Buyer's specifications as set forth on
Exhibit C that is equal to the amount
- 2 -
5
set forth opposite the last year of such three (3) year period on Exhibit D
under the caption "Rolling Minimum" (the "3 Year Rolling Minimum").
Seller agrees that it will construct a new brown field furnace, which
shall be known as Furnace No. 4 ("Furnace No. 4"), and will use its commercially
reasonable best efforts to cause such furnace to be fully constructed and
operational prior to January 1, 2001.
4. Incremental Volume. Quantities up to the Total Maximum Purchases as
defined in Exhibit D per Calendar Year shall be understood as conventional
volume ("Conventional Volume"). Any additional quantity of silicon metal
purchased by Buyer from Seller in any Calendar Year from the production tonnages
of No. 1, No. 2, No. 3 or No. 4 furnaces over and above the Conventional Volume
for that Calendar Year shall be incremental volume ("Incremental Volume"). Any
such Incremental Volume will be added to the Conventional Volume provided for in
this Agreement by means of a sub-agreement between Seller and Buyer which shall
set forth the agreed upon pricing, quantities and other specifications for such
Incremental Volume.
5. Quality. All of the silicon metal sold and delivered hereunder by
Seller shall meet the specifications which are set forth in Exhibit C attached
hereto and made a part hereof, as well as such other specifications which may be
agreed upon in writing from time to time between Seller and Buyer, unless waived
by Buyer.
6. Pricing.
[***********************]
- 3 -
6
7. Term. The initial term of this Agreement (the "Term") shall be for
seven (7) Calendar Years commencing January 1, 1998 and, if either party issues
a "notice of termination" prior to January 1, 2002, ending December 31, 2004,
unless sooner terminated as provided below. If neither party issues a "notice of
termination," the Term of this Agreement shall automatically continue from year
to year after December 31, 2004 and may be terminated under this Section by
either party submitting to the other party not less than twenty four (24) months
prior written notice of such party's election to terminate this Agreement.
8. Confidentiality. This Supply Agreement and everything set forth
herein, all information shared pursuant hereto between Seller and Buyer, and all
related agreements and sub-agreements are and shall remain confidential and
proprietary to the parties hereto, or to the disclosing party, if appropriate.
All information disclosed by a party hereto under this Agreement shall be
subject to the same obligations of non-disclosure and limited use by the
receiving party in accordance with the terms of the Confidentiality Agreement
dated July 17, 1995, between Dow Corning Corporation, Seller and Buyer, or in
accordance with any present or future confidentiality agreements which may be
applicable between Seller and Buyer.
- 4 -
7
9. Third Parties. Seller and ▇▇▇▇▇ understand and agree that some of
the information, gains or improvements resulting from the cooperation and
productivity sharing to be carried out hereunder and under any sub-agreement
hereto will be applicable to the business of one or both of the parties as that
business relates to third parties. Therefore, despite the provision for
confidentiality set forth herein above, Seller and ▇▇▇▇▇ agree to meet and to
discuss the desire of either party hereto to use information, gains or
improvements in their business with third parties, and both Seller and Buyer
agree that all reasonable requests or permission to so share such information,
gains or improvements shall be mutually agreed to by both parties hereto and
such agreement shall not be unreasonably withheld.
10. Right to Audit. Buyer reserves the right to have Seller's records
inspected by a certified public accountant agreed to by both parties at
reasonable times during normal business hours to verify increases or decreases
in the cost factors set forth in Exhibit A. The certified public accountant will
be instructed to only advise Buyer and Seller whether the increases or decreases
are correct or incorrect according to the provisions of Exhibit A, and, if
incorrect, to advise Buyer and Seller what the correct increase or decrease
should be. The certified public accountant shall be advised not to reveal the
facts forming the basis of his opinion regarding price increases or decreases to
any party whatsoever, including Buyer, without the prior written consent of
Seller.
11. Delivery and Acceptance. Delivery of the silicon metal hereunder by
Seller to Buyer shall be [******], or other sources mutually approved by both
parties hereto, such approval not to be unreasonably withheld. [********]
12. Specifications and Quality Control, Weight, Patents and Disclaimer.
A. Product Specification and Quality Control. All of the
silicon metal delivered hereunder shall conform to the specifications
which are set forth in Exhibit C attached hereto and made a part
hereof, unless waived by Buyer. Seller warrants that Buyer shall
receive a good title to the silicon metal delivered hereunder. In the
event of disqualification of the silicon metal because of failure to
conform to the specifications, Buyer may suspend this Agreement at its
discretion until the product is requalified by ▇▇▇▇▇. Both parties will
use their respective
- 5 -
8
commercially reasonable best efforts to remedy the problems. Pending
resolution of such problems, the minimum quantity of silicon metal that
Buyer is obligated to purchase hereunder may at ▇▇▇▇▇'s option be
adjusted downwards accordingly for that period of time.
The analysis established by ▇▇▇▇▇▇ is preliminarily binding.
However, if ▇▇▇▇▇'s own sampling analysis within sixty (60) days after
delivery states a deviation from the specification according to Exhibit
C, then Buyer in writing immediately will give Seller the opportunity
to carry out a joint sample taking. Should the parties fail to reach an
agreement as to analysis, they shall jointly appoint an independent
expert. The costs for the expert shall be borne by the party whose
results deviates the most from the expert's analysis.
B. Weight. Seller's certified weight shall govern [****].
However, ▇▇▇▇▇ reserves the right to submit any delivery to check
weighing on a certified weight immediately after receipt of the
material. If the value deviates more than [***] from the weight
indicated by Seller, then Buyer will inform Seller in writing
immediately about the difference, and an appropriate invoicing
adjustment will be made.
C. Patents. Notwithstanding any other limitations of liability
in this Agreement, if any suit is brought against Buyer for
infringement of any patents alleging that the silicon metal delivered
under this Agreement or that Seller's method of manufacturing it
infringes any patents, Seller shall, at its own expense, defend and
control the suit against these allegations only, and shall pay any
award of damages assessed against Buyer in the suit to the extent only
that the damages are awarded in connection specifically with the
alleged infringement, provided ▇▇▇▇▇ gives Seller prompt notice in
writing of the institution of the suit and, to the full extent of the
Buyer's power to do so, ▇▇▇▇▇ permits Seller to defend and control the
suit against these allegations. The above fully expresses Buyer's
exclusive remedy and Seller's sole liability with respect to
infringement of any patent by the silicon metal delivered under this
Agreement, and Seller expressly disclaims any express or implied
warranty against infringement with respect to such silicon metal. In no
case will Seller be liable to defend or pay any award of damages
assessed against Buyer in any suit or cause of action alleging that the
use of the silicon metal delivered under this Agreement infringes any
patent. Buyer shall not hold Seller responsible for any claim, loss or
expense arising out of Seller's compliance with any specifications
furnished by Buyer with respect to the silicon metal.
Notwithstanding any other limitations of liability in this
Agreement, if any suit is brought against Seller for infringement of
any patents alleging that ▇▇▇▇▇'s use of the silicon metal delivered
under this Agreement infringes any patents, Buyer shall, at its own
expense, defend and control the suit against these allegations only,
and shall pay any award of damages assessed against Seller in the
- 6 -
9
suit to the extent only that the damages are awarded in connection
specifically with the alleged infringement, provided that ▇▇▇▇▇▇ gives
▇▇▇▇▇ prompt notice in writing of the institution of the suit and, to
the full extent of the Seller's power to do so, Seller permits Buyer to
defend and control the suit against these allegations. The above fully
expresses Seller's exclusive remedy and ▇▇▇▇▇'s sole liability with
respect to infringement of any patent by ▇▇▇▇▇'s use of any silicon
metal delivered under this Agreement, and Buyer expressly disclaims any
express or implied warranty against infringement with respect to
▇▇▇▇▇'s use of silicon metal.
D. Seller further warrants that it has taken adequate
precautions to verify that its computer systems will properly process
date calculations through the year 2000 and beyond and that its
manufacture and delivery of the Goods will not be delayed or suspended
due to the failure of its date calculations.
E. DISCLAIMER. EXCEPT AS SPECIFIED HEREINABOVE IN THIS
PARAGRAPH 12, THERE ARE NO EXPRESS WARRANTIES BY SELLER AND NO
WARRANTIES BY SELLER SHALL BE IMPLIED OR OTHERWISE CREATED UNDER
APPLICABLE LAW, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY OR ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
13. Payment Terms. For all silicon metal sold, delivered and accepted
hereunder, Buyer shall pay Seller, [***] of the receipt of Seller's invoice.
14. Force Majeure.
A. Neither party shall be liable for its failure to perform
hereunder (other than any failure to pay money) caused by contingencies
beyond its reasonable control, including but not limited to acts of
God, fire, floods, wars, sabotage, accidents, labor disputes (whether
or not such disputes are within the power of the party to settle),
serious equipment failure resulting in a full furnace outage in excess
of twenty-one (21) days unless caused by a misuse or failure to perform
routine maintenance or furnace power reduction in excess of thirty
percent (30%) of furnace normal power for a period of twenty-eight (28)
days, governmental actions, inability to obtain material, equipment or
transportation and any other occurrence beyond its control. The party
whose performance is prevented by such contingencies shall have the
right not to perform as herein provided during the period of such
contingency and the total amount of silicon metal herein provided for
shall be reduced accordingly.
B. If a force majeure event prohibits Seller from delivering
to Buyer the quantities of Silicon Metal provided for hereunder, Seller
shall deliver to Buyer that percentage of Seller's production which is
equal to the percentage of Seller's production during the previous
twelve (12) month period which was represented
- 7 -
10
by ▇▇▇▇▇'s purchases during that time period, at a net unit price which
is equal to the unit price which would have been paid by Buyer if its
full purchase order had been filled. If the Buyer is required to
purchase silicon metal from other sources due to a force majeure
condition at the Seller, then the Buyer may reduce the contract minimum
by a like amount.
C. If Buyer is affected by an event of force majeure, Buyer
shall purchase from Seller the quantity of silicon metal which shall be
determined on the same basis as set forth in Paragraph B above.
15. Hardship. The intent of the parties is that the results of this
Agreement are to be favorable to both parties over the long term, consistent
with the attitude put forward in this Agreement. If during the term of this
Agreement, one or both of the parties experiences unexpected or excessive
hardship related to the performance of this Agreement, then both parties agree
to try to resolve the hardship on a reasonable basis through mutual discussions.
Hardship includes but is not limited to significant charges in costs greater
than 10%, but in no way event shall be related to a change in market conditions,
such as supply/demand imbalances or market price changes.
16. Assignment/Successor. This Agreement may not be assigned by either
party without the prior written consent of the other party, which consent shall
not be unreasonably withheld. Notwithstanding the above, Buyer may perform any
of the obligations undertaken by it and may exercise any of the rights granted
to it under this Agreement through Dow Corning Corporation, or any wholly owned
subsidiary thereof; provided, however, that any act or omission of any such
company with respect to this Agreement shall be deemed to be the act or omission
of the Buyer. For the avoidance of doubt, any purchases by any such company
shall be deemed to be purchases by the Buyer and counted towards meeting ▇▇▇▇▇'s
minimum purchase obligations hereunder.
In the event of a change in the ownership or control of either party
hereto, this Agreement shall remain fully enforceable according to the present
terms and conditions; the other party will be notified accordingly by the
affected party and should any new owner or controlling body be unacceptable to
the other party, that other party may, upon notice to the affected party,
terminate this Agreement with twelve (12) months written notice of termination.
17. Governing Law. The validity, interpretation and performance of this
Agreement shall be governed under and in accordance with the laws of the State
of Michigan.
18. Entire Agreement. As of the effective date 1 January 1998, this
Agreement, along with its Exhibits, confidentiality agreement and any
sub-agreements, contains the entire agreement of the parties, superseding any
previous understandings, commitments or agreements, oral or written, with
respect to the subject matter hereof. No modification of this Agreement or
waiver of the terms and conditions hereof shall be
- 8 -
11
binding upon either party unless approved in writing by an authorized
representative of such party. Further, no modification of this Agreement shall
be effected by the acknowledgment or acceptance of purchase order forms or
releases containing other or different terms or conditions, whether or not
signed by an authorized representative of such party.
19. Compliance with Law. Seller and ▇▇▇▇▇ hereby agree to comply with
all provisions of all present and future laws and regulations applicable to this
Agreement and its performance.
20. Relationship of the Parties. Seller and Buyer do not intend or
contemplate the formation or establishment of any partnership, joint venture,
pooling arrangement or other formal business organization of any kind. Nothing
in this Agreement is to be construed as constituting the appointment of any
party hereto as an employee or agent of the other party. Neither party shall
have any right or authority to assume or to create any obligation or
responsibility, as expressed or implied, on behalf of or in the name of the
other party. Each party is acting hereunder solely as an independent contractor.
21. Representations of Buyer. Buyer represents and warrants to Seller
that the purchase of silicon metal, including the purchase of silicon metal in
the quantities and on the terms set forth herein, is a part of the regular and
ordinary course of the business of Buyer, that this Agreement is made and
entered into in the ordinary course of the business of Buyer, that the
execution, delivery and performance of this Agreement by Buyer does not violate
any law, rule, regulation, judicial order or decree to which Buyer is subject,
that no consent or approval of any court, judicial body, governmental agency or
third party to the execution, delivery or performance of this Agreement by Buyer
is necessary or required, and that this Agreement is the legal, valid and
binding obligation of Buyer enforceable against Buyer in accordance with its
terms.
22. Notices. Any written notice required to be provided to either of
the parties hereunder shall be effective when mailed by registered or certified
mail, postage prepaid, or when sent by facsimile or courier, in each case
addressed to the party intended to receive the same as follows:
To Seller:
Simcala, Inc.
P.O. Box 68
Ohio Ferroalloys Rd.
Mt. Meigs, AL 36057
Facsimile: (▇▇▇) ▇▇▇-▇▇▇▇
Attention: President and Chief Executive Officer -
▇.▇. ▇▇▇▇▇▇▇▇▇
- 9 -
12
To Buyer:
Dow Corning Corporation
▇▇▇▇ ▇. ▇▇▇▇▇▇▇ ▇▇.
Midland, MI 48686-0995
Facsimile: (▇▇▇) ▇▇▇-▇▇▇▇
Attention: Purchasing Manager - ▇▇▇▇▇ ▇. ▇▇▇
23. Arbitration. If a dispute arises under this Supply Agreement which
cannot be resolved by the personnel directly involved, either party may give
written notice to the other designating an executive officer with appropriate
authority to be its representative in negotiations relating to the dispute. Upon
receipt of this notice, the other party shall, within five (5) business days,
designate an executive officer with similar authority to be its representative.
The designated executive officers shall, following whatever investigation each
deems appropriate, promptly enter into discussions concerning the dispute. If
the dispute is not resolved as a result of such discussions within ninety (90)
days, such dispute shall be referred to final and binding arbitration in
accordance with the commercial rules of the American Arbitration Association.
Unless the parties agree otherwise in writing, such arbitration shall be held in
a mutually acceptable location. The expense of arbitration shall be borne
one-half (1/2) by Seller and one-half (1/2) by Buyer, unless otherwise specified
in the award. Each party shall pay the fees and expenses of its own counsel,
unless otherwise specified in the award.
24. Delivery/Scheduling. Seller shall deliver silicon metal to Buyer in
approximately equal quarterly quantities starting in the year 1998. Prior to the
beginning of each Calendar Year, Buyer shall provide Seller with a non-binding
estimate of the quantity of silicon metal that it will purchase hereunder during
each quarter of the following Calendar Year, which non-binding estimate shall be
updated on a quarterly basis during the year.
25. Purchase Orders. Buyer may issue purchase orders to Seller
hereunder for the silicon metal, for Buyer's administrative purposes only, and
no terms and conditions contained in such purchase orders which conflict with
anything in this Supply Agreement shall be effective as between Buyer and
Seller.
26. Packaging. If any change in the herein agreed upon packaging is
requested by Buyer, Seller shall package Products in accordance with
instructions from Buyer, at Buyer's expense.
27. Counterparts. This Agreement is executed in any number of
counterparts, each of which shall be deemed an original for all purposes, and
all of which together shall constitute one agreement.
- 10 -
13
IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be
executed by representatives duly authorized as of the day and year first above
written.
WITNESS: SIMCALA, INC.
By: /s/ ▇.▇. ▇▇▇▇▇▇▇▇▇
--------------------------------------
▇.▇. ▇▇▇▇▇▇▇▇▇
President and Chief Executive Officer
WITNESS: DOW CORNING CORPORATION
By: /s/ ▇▇▇▇▇▇ ▇. ▇▇▇▇▇
--------------------------------------
▇▇▇▇▇▇ ▇. ▇▇▇▇▇
Vice President, General Manager,
CPBG
- 11 -