Portions of this exhibit have been omitted for confidential treatment pursuant to Item 601(b)(10)(iv) of Regulation S-K. COMMERCIALIZATION AND LICENSE AGREEMENT BETWEEN UNIQURE BIOPHARMA BV AND CSL BEHRING LLC Dated June 24, 2020

1.2

[*]

1.3

“AAV5 NAb Assay” means the AAV5 neutralizing antibody assay [*].

1.4

“Abbreviated Approval Product” means, with respect to any Licensed Product in a particular country in the Territory, any Gene Therapy Product that (a) is marketed for the prevention, treatment or cure of Hemophilia B and sold by a Third Party that is not a Sublicensee of, or a Third Party Distributor for, Partner or any of its Affiliates (and such Gene Therapy Product is not otherwise licensed, supplied, or otherwise permitted or marketed by a Party or its Affiliates or Sublicensees), (b) comprises an AAV5 viral vector carrying the Padua variant of the Factor IX gene, and (c) is approved through an abbreviated process (such as, in the United States, a “Biosimilar Biologic Product” under the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act of 2010, Title VII, Subtitle A, Biologics Price Competition and Innovation Act of 2009 (codified, in part at 42 U.S.C. § 262), or, outside the United States, in accordance with European Directive 2001/83/EC on the European Community Code for medicinal products (Article 10(4) and Section 4, Part II of Annex I) and European Regulation EEC/2309/93 establishing the European Community procedures for the authorization and evaluation of medicinal products, each as amended, and together with all associated final guidance documents, and any counterparts thereof or equivalent process to the foregoing inside or outside of the United States or E.U.).

1.5

“Accounting Standards” means GAAP or IFRS (as applicable to a Party).

1.6

“Affiliates” of a Person from time to time means any other Person that (directly or indirectly) is controlled by, controls, or is under common control with such Person at such time.  For the purposes of this definition only, the term “control” (including, with correlative meanings, the terms “controlled by” and “under common control with”) as used with respect to a Person, means the possession, directly or indirectly, of the power to direct, or cause the direction of, the management or policies of such Person, whether through the ownership of voting securities, by contract or otherwise, and “control” will be presumed to exist if either of the following conditions is met: (a) in the case of a corporate entity, direct or indirect ownership of voting securities entitled to cast more than [*] percent ([*]%) of the votes in the election of directors or (b) in the case of a non-corporate entity, direct or indirect ownership of more than [*] percent ([*]%) of the equity interests with the power to direct the management and policies of such entity. For all purposes of this Agreement, uniQure or its Affiliates will not be an Affiliate of Partner or any of Partner’s Affiliates, and Partner or its Affiliates will not be an Affiliate of uniQure or any of uniQure’s Affiliates.

1.7

“Agreement” has the meaning set forth in the Preamble.

1.8

“Alleged Party” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.9

“Alleging Party” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.10

“Alliance Manager” has the meaning set forth in Section 7.1 (Alliance Managers).

1.11

“Allowable Overruns” means, with respect to the uniQure Development Budget (including the Current Phase III Budget or any uniQure Additional Development Budget, as applicable), any actual internal costs (at the FTE Rate) or documented out-of-pocket Third Party expenses incurred by or on behalf of uniQure in the performance of any uniQure Development Activities in accordance with the Current Phase III Protocol or the uniQure Additional Development Plan (as applicable) that is within [*]% of the aggregate amount budgeted in the Current Phase III Budget or uniQure Additional Development Budget (as applicable).

1.12

“Alternative Transaction” means (a) any sale, assignment, transfer, or other disposition (howsoever effected), including any exclusive or co-exclusive license, of all or a material portion of the Commercialization rights within the United States to AMT-061 by uniQure or any of its Affiliates to a Third Party, (b) any sale, assignment, transfer, or other disposition (howsoever effected) to a Third Party of (i) control (within the meaning set forth in the definition of Affiliate) of uniQure, or (ii) all or substantially all of the assets of uniQure.

1.13

“AMT-061” means uniQure’s proprietary gene therapy product known as etranacogene dezaparvovec, consisting of an AAV5 viral vector carrying a gene cassette with the LP-1 promoter and the Padua variant of Factor IX (FIX-Padua).

1.14

“Anti-Corruption Laws” means any local and other anti-corruption laws, including the provisions of the United States Foreign Corrupt Practices Act, as amended.

1.15

“Antitrust Agencies” means the Competition and Markets Authority of the United Kingdom, the United States Federal Trade Commission, the United States Department of Justice, and the Australian Competition and Consumer Commission.

1.16

“Antitrust Clearance Date” means the earliest date on which all applicable waiting periods and approvals (including confirmations that an Antitrust Agency does not oppose the transactions contemplated by this Agreement) required or advisable under Antitrust Laws in the U.S., the United Kingdom, and Australia with respect to the transactions contemplated under this Agreement have expired, been terminated (in the case of waiting periods) or been received (in the case of approvals), or been terminated because the transactions contemplated by this Agreement are found not to qualify for review.

1.17

“Antitrust Filing” means filings by uniQure and Partner with the Competition and Markets Authority of the United Kingdom, the United States Federal Trade Commission, the United States Department of Justice, the Australian Competition and Consumer Commission, as required or advisable under any Antitrust Laws with respect to the transactions contemplated under this Agreement, together with all required documentary attachments thereto.

1.18

“Antitrust Laws” means any and all Applicable Laws designed to prohibit, restrict, or regulate actions for the purpose or effect of monopolization, merger control, or restraint of trade.

1.19

“Applicable Law” means collectively all laws, statutes, rules, regulations, ordinances, decrees, and judicial and administrative orders and judgments of any applicable Governmental Authority that govern or otherwise apply to a Party or the activities contemplated herein, including all Antitrust Laws and Anti-Corruption Laws.

1.20

“Assigned Regulatory Materials” has the meaning set forth in Section 3.5.1 (Regulatory Transfer).

1.21

“Business Day” means a day other than a Saturday, Sunday, or a day on which banking institutions in New York, New York (USA) or Amsterdam, Netherlands are authorized or required by Applicable Law to remain closed.

1.22

“Buyers” has the meaning set forth in Section 1.117 (Net Sales).

1.23

“cGMP” means all applicable then-current laws and guidelines applicable to the Manufacture of the Licensed Product, including, as applicable, (a) the principles detailed in the U.S. Current Good Manufacturing Practices, 21 C.F.R. Parts ▇, ▇▇▇, ▇▇▇, ▇▇▇, ▇▇▇, ▇▇▇ ▇▇▇ ▇▇▇, (▇) European Directive 2003/94/EC and Eudralex 4, (c) the principles detailed in the International Conference on Harmonization’s Q7 guidelines, (d) the FD&C Act and those standards required by the FDA, and (e) the equivalent Applicable Law in any relevant country or region, each as may be amended and applicable from time to time.

1.24

“Change of Control” means, with respect to a Party, that: (a) any Third Party acquires directly or indirectly the beneficial ownership of any voting security of such Party, or, if the percentage ownership of such Third Party in the voting securities of such Party is increased through stock repurchase, redemption, cancellation, recapitalization, reorganization, or other action affecting the capital stock of such Party and immediately thereafter such Third Party is, directly or indirectly, the beneficial owner of voting securities representing more than 50% of the total voting power of all of the then outstanding voting securities of such Party; (b) a merger, consolidation, recapitalization, reorganization or other business combination of or involving such Party is consummated that results in shareholders or equity holders of such Party immediately prior to such transaction, ceasing to own more than 50% of the combined outstanding voting securities of the surviving entity (or its parent entity) immediately following such transaction; or (c) there is a sale or transfer to a Third Party of all or substantially all of such Party’s consolidated assets taken as a whole, through one or more related transactions; for the purposes hereof, the term “voting security” of a Party means any security that entitles the holder thereof to vote on the election of directors of such Party.

1.25

“Clinical Trial” means any clinical trial in humans that is conducted in accordance with GCP and is designed to generate data in support or maintenance of an IND, MAA, or other similar marketing application or Regulatory Approval, whether prior to or after receipt of Regulatory Approval for a pharmaceutical or biologic product.

1.26

“CMO” means a contract manufacturing organization.

1.27

“Commercialization” means any and all activities directed to the marketing, promotion, distribution, pricing, importing, exporting, reimbursement, offering for sale, and sale of a

1.28

“Commercially Reasonable Efforts” means, with respect to the Exploitation of a Licensed Product by a Party, those efforts and resources, including allocation of reasonably necessary personnel, equivalent to the efforts that a reasonable global biopharmaceutical company or a pharmaceutical company, in each case, that is of comparable size and resources to such Party would typically devote as part of an active and continuing program of development and commercialization of a pharmaceutical or biologic product of similar market potential, at a similar stage of its product life and taking into account all relevant factors, facts, and circumstances, including the competitiveness of the marketplace and the proprietary position, product profile, the patent or other intellectual property status (including the strength and duration of patent protection and anticipated exclusivity), the likelihood and timing of Regulatory Approvals and Reimbursement Approvals, the current guidance and requirements for Regulatory Approvals and Reimbursement Approvals, the then and projected regulatory status, the ability to Manufacture or have Manufactured such product, labeling considerations, safety, tolerability, stability and efficacy, present and future market potential and performance, existing and projected pricing, sales, reimbursement and profitability, pricing or reimbursement changes in relevant countries or regulatory jurisdictions. Commercially Reasonable Efforts requires, with respect to an obligation, that the Party: (a) promptly assign responsibility for such obligation to specific employees who are held accountable for progress and monitor such progress on an on-going basis, (b) set and consistently seek to achieve specific and meaningful objectives for carrying out such obligation, and (c) consistently make and implement decisions and allocate resources designed to advance progress with respect to such objectives; in each case ((a), (b), and (c)), consistent with such Party’s usual business practice. Notwithstanding the forgoing or any provision in this Agreement to the contrary, (i) Partner shall not be in breach of its obligations to use Commercially Reasonable Efforts in respect of any Development, Manufacturing, Commercialization or any other activities to the extent a delay in Partner’s performance is caused by a failure or delay in the performance by uniQure of any of its obligations under this Agreement, and (ii) in a determination of an expenditure of Commercially Reasonable Efforts, a Party may not take into account any of its own other products (including any other product for Hemophilia B).

1.29

“Committees” has the meaning set forth in Section 7.7 (Committees).

1.30

“Competitive Product” means any [*] for the treatment, prevention, or cure of Hemophilia B.

1.31

“Complete Regulatory Files” has the meaning set forth in Section 3.5.1 (Regulatory Transfer).

1.32

“Confidential Disclosure Agreement” means that certain Confidential Disclosure Agreement by and between uniQure and Partner effective on November 11, 2019.

1.33

“Confidential Information” means, subject to Section 9.3 (Exemptions), (a) Know-How and any technical, scientific, trade, research, manufacturing, business, financial, marketing, product, supplier, intellectual property, and other non-public or proprietary data or information (including unpublished patent applications) that may be disclosed by or on behalf of one Party or its Affiliates to the other Party or its Affiliates pursuant to this Agreement or the transactions contemplated hereby (including information disclosed prior to the Execution Date pursuant to the Confidential Disclosure Agreement), regardless of whether such information is specifically marked or designated as confidential and regardless of whether such information is in written, oral, electronic, or other form, and (b) the terms of this Agreement.

1.34

“Control” or “Controlled” means (a) the possession by a Party or its Affiliates (whether by ownership, license, or otherwise other than pursuant to this Agreement) of, (i) with respect to any tangible Know-How, the legal authority or right to physical possession of such tangible Know-How, with the right to provide such tangible Know-How to the other Party on the terms set forth herein, or (ii) with respect to Patent Rights, Regulatory Approvals, Reimbursement Approvals, Regulatory Submissions, intangible Know-How, or other intellectual property rights, the legal authority or right to grant a license, sublicense, access, right of reference, or right to use (as applicable) to the other Party under such Patent Rights, Regulatory Approvals, Regulatory Submissions, intangible Know-How, or other intellectual property rights on the terms set forth herein, in each case ((i) and (ii)), without breaching or otherwise violating the terms of any arrangement or agreement with a Third Party in existence as of the time such Party or its or Affiliates would first be required hereunder to grant the other Party such access, right of reference, right to use, licenses, or sublicense and without being required to make any additional payment to any Third Party and (b) with respect to any product, the possession by a Party or its Affiliates of the ability (whether by sole or joint ownership, license, or otherwise, other than pursuant to the licenses granted under this Agreement) to grant an exclusive (or non-exclusive, as applicable) license or sublicense of Patent Rights that Cover such product or proprietary Know-How that is used in connection with the Exploitation of such product. Notwithstanding the foregoing, a Party and its Affiliates will not be deemed to “Control” any Patent Right, Know-How, or product that, prior to the consummation of a Change of Control of such Party, is owned or in-licensed by a Third Party that becomes an Affiliate of such acquired Party after the Effective Date as a result of such Change of Control unless (A) prior to the consummation of such Change of Control, such acquired Party or any of its Affiliates also Controlled such Patent Right, Know-How, or product, or (B) the Know-How, Patent Rights, or product owned or in-licensed by the applicable Third Party were not used by the acquired Party or any of its Affiliates (as defined prior to the consummation of such Change of Control) in the performance of activities under this Agreement prior to the consummation of such Change of Control, but after the consummation of such Change of Control, such acquired Party or any of its Affiliates determines to use or uses any such Patent Rights, Know-How, or product in the performance of its obligations or exercise of its rights under this Agreement, in each of which cases ((A) and (B)), such Patent Rights, Know-How, or product will be “Controlled” by such Party for purposes of this Agreement.

1.35

“Controlling Party” has the meaning set forth in Section 12.5.1 (Notice).

1.36

“Cover” means (a) with respect to a particular subject matter at issue and a relevant Patent Right, that the manufacture, use, sale, offer for sale, or importation of such subject matter would fall within the scope of one or more claims in such Patent Right.

1.37

“CRE Cure Plan” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.38

“CRE Default” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.39

“CRE Default Notification” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.40

“CRE Explanation” has the meaning set forth in Section 13.2.2(b) (Termination for Cause).

1.41

“CREATE Act” has the meaning set forth in Section 12.3 (CREATE Act).

1.42

“Current Phase III Budget” means the budget of all internal costs (at the FTE Rate) and Third Party expenses to be incurred after the Effective Date in the performance of the Current Phase III Protocol, as such budget may be updated in accordance with this Agreement.

1.43

“Current Phase III Protocol” means the protocol as of the Effective Date or as may be amended during the Term in accordance with this Agreement for the Phase III Clinical Trial for which uniQure is the sponsor for the Lead Product in the Field registered at ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ as “HOPE-B: Trial of AMT-061 in Severe or Moderately Severe Hemophilia B Patients.”

1.44

“Debarred/Excluded” means any Person (a) becoming debarred or suspended under 21 U.S.C. §§335a(a) or (b), the subject of a conviction described in 21 U.S.C. §335a, disqualified by FDA, excluded, or having previously been excluded, from a U.S. federal or governmental health care program, debarred from U.S. federal contracting, convicted of or pled nolo contendere to any felony, or to any U.S. federal or state legal violation (including misdemeanors) relating to medical drug products or services or fraud, subject to OFAC sanctions or on the OFAC list of specially designated nationals, or (b) the subject of any similar sanction of any Governmental Authority in the Territory.

1.45

“Default” has the meaning set forth in Section 13.2.2(a) (Termination for Cause).

1.46

“Default Notification” has the meaning set forth in Section 13.2.2(a) (Termination for Cause).

1.47

“Development” means all internal and external research, development, and regulatory activities related to pharmaceutical or biologic products, including (a) non-clinical testing, toxicology, testing and studies, non-clinical and preclinical activities, and Clinical Trials, and (b) preparation, submission, review, and development of data or information for the purpose of submission to a Regulatory Authority to obtain authorization to conduct Clinical

1.48

“Development Payment” has the meaning set forth in Section 8.4 (Development Payment).

1.49

“Disclosing Party” has the meaning set forth in Section 9.1.1 (Duty of Confidence).

1.50

“Dispute” has the meaning set forth in Section 14.1 (Dispute Resolution; General).

1.51

“Dollar” means the U.S. dollar, and “$” will be interpreted accordingly.

1.52

“Effective Date” has the meaning set forth in Section 15.1 (Effective Date).

1.53

“EMA” means the European Medicines Agency or any successor agency thereto.

1.54

“Encumbrance” means a lien, charge, security interest, mortgage, pledge, liability, or other encumbrance or right exercisable by a Third Party having similar effect.

1.55

“Escalation Index” means with respect to uniQure, the Consumer Price Index-Urban Wage Earners and Clerical Workers, U.S. City Average, All Items 1982-84=100, unadjusted indexes, published by the United States Department of Labor, Bureau of Labor Statistics (or its successor equivalent index).

1.56

“European Union” or “E.U.” means the economic, scientific, and political organization of member states of the European Union as it may be constituted from time to time.

1.57

“Examined Party” has the meaning set forth in Section 8.12 (Financial Records and Audits).

1.58

“Execution Date” has the meaning set forth in the Preamble.

1.59

“Executive Officer” means (a) in the case of uniQure, the chief executive officer of uniQure N.V and (b) in the case of Partner, the chief executive officer of CSL Limited, provided that each of them may delegate any matter to an appropriate executive officer or other senior member of management, in which case such delegee will be deemed the Executive Officer for such matter.

1.60

“Existing In-Licenses” means any agreement entered into by uniQure or its Affiliates with a Third Party prior to the Execution Date, including any amendments or restatements

1.61

“Existing Product” has the meaning set forth in Section 13.3.1 (Licenses).

1.62

“Exploit” means to make, have made, use, offer to sell, sell, Develop, Manufacture, perform Medical Affairs, Commercialize, or otherwise exploit. “Exploitation” will be construed accordingly.

1.63

“Factor IX” means the serine protease of the coagulation system commonly referred to as “factor IX”.

1.64

“FD&C Act” means the United States Federal Food, Drug and Cosmetic Act, as amended from time to time, together with any rules, regulations, and requirements promulgated thereunder (including all additions, supplements, extensions, and modifications thereto).

1.65

“FDA” means the United States Food and Drug Administration or any successor entity thereto having essentially the same function.

1.66

“Field” means the diagnosis, treatment, prevention, or cure of any human diseases or medical conditions.

1.67

“Financial Quarter” means the respective periods of three consecutive calendar months ending on September 30, December 31, March 31 and June 30.

1.68

“Financial Year” means each 12-month period commencing on July 1.

1.69

“First Commercial Sale” means, with respect to a Licensed Product or an Abbreviated Approval Product in any country, the first sale of such Licensed Product or Abbreviated Approval Product (as applicable) to a Third Party for distribution or use in such country after receipt of Regulatory Approvals (and, if applicable in such country, Reimbursement Approvals) for such Licensed Product or Abbreviated Approval Product (as applicable) in such country. First Commercial Sale excludes any sale or other distribution of a Licensed Product or Abbreviated Approval Product for use in a Clinical Trial or other Development activity.

1.70

“First Major Regulatory Approval” means the First Regulatory Approval of a Licensed Product to be obtained in any of the Major Countries and, if applicable in such Major Country, the first Reimbursement Approval of such Licensed Product in such Major Country.

1.71

“Flash Report” has the meaning set forth in Section 8.3.3(a) (Flash Reports).

1.72

“Force Majeure” has the meaning set forth in Section 16.7 (Force Majeure).

1.73

“FTC” has the meaning set forth in Section 15.2 (Antitrust Filings).

1.74

“FTE” means the equivalent of the work of one duly qualified employee of a Party full time for one year (consisting of a total of 1,800 hours per year) carrying out Development or Manufacturing or other scientific or technical work under this Agreement.  Overtime and work on weekends, holidays, and the like, in each case, will not be counted with any multiplier (e.g., time-and-a-half or double time) toward the number of hours that are used to calculate the FTE contribution.  The portion of an FTE billable by a Party for one individual during a given accounting period will be determined by dividing the number of hours worked directly by such individual on the work to be conducted under this Agreement during such accounting period and the number of FTE hours applicable for such accounting period based on 1,800 working hours per Financial Year.

1.75

“FTE Rate” means the amount for an FTE per Financial Year, which for the Financial Year ending on June 30, 2021 will be [*] per FTE, pro-rated for the period beginning on the Effective Date and ending on June 30, 2021.  Beginning on July 1, 2021 and on July 1 of each subsequent Financial Year during the Term, each FTE Rate is subject to annual adjustment by the percentage increase or decrease in the Escalation Index comparing the levels of the Escalation Index as of June 30 of the two most recently completed Financial Years.

1.76

“GAAP” means the generally accepted accounting principles in the United States, consistently applied.

1.77

“GCP” means all applicable good clinical practice standards for the design, conduct, performance, monitoring, auditing, recording, analyses and reporting of Clinical Trials, including, as applicable (a) as set forth in the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use Harmonized Tripartite Guideline for Good Clinical Practice (CPMP/ICH/135/95) (the “ICH Guidelines”) and any other guidelines for good clinical practice for trials on medicinal products in the Territory, (b) the Declaration of Helsinki (2013) as last amended at the 52^nd World Medical Association in October 2000 and any further amendments or clarifications thereto, (c) U.S. Code of Federal Regulations Title 21, Parts 11 (Electronic Records; Electronic Signatures), 50 (Protection of Human Subjects), 54 (Financial Disclosure by Clinical Investigators), 56 (Institutional Review Boards), 312 (Investigational New Drug Application), 601 (Applications for FDA Approval of a Biologic License), as may be amended from time to time, and (d) the equivalent Applicable Law in the Territory, each as may be amended and applicable from time to time and in each case, that provide for, among other things, assurance that the clinical data and reported results are credible and accurate and have data integrity and protect the rights, integrity, and confidentiality of trial subjects.

1.78

[*]

1.79

“Gene Therapy Product” means [*].

1.80

“GLP” means all applicable good laboratory practice standards, including, as applicable, as set forth in the then-current good laboratory practice standards promulgated or endorsed by the U.S. Food and Drug Administration, as defined in 21 C.F.R. Part 58, and the

1.81

“Governmental Authority” means any federal, national, state, provincial, or local government, or political subdivision thereof, or any multinational organization or any authority, agency, regulatory body, or commission entitled to exercise any administrative, executive, judicial, legislative, police, regulatory or taxing authority or power, or any court or tribunal (or any department, bureau or division of any of the foregoing, or any governmental arbitrator or arbitral body).  Governmental Authorities include all Regulatory Authorities.

1.82

“Hemophilia B” means the genetic bleeding disorder caused by missing or defective blood clotting Factor IX known as hemophilia B.

1.83

“ICC” has the meaning set forth in Section 14.2 (Arbitration).

1.84

“ICC Court” means the International Court of Arbitration of the ICC.

1.85

“IFRS” means International Financial Reporting Standards as endorsed by the EU, consistently applied.

1.86

“Incremental Withholding Amount” has the meaning set forth in Section 8.13 (Taxes).

1.87

“IND” means an Investigational New Drug application required pursuant to 21 C.F.R. Part 312 or any comparable filings outside of the U.S. (such as an application for a Clinical Trial authorization in the E.U.).

1.88

“Indemnified Party” has the meaning set forth in Section 11.3 (Indemnification Procedure).

1.89

“Indemnifying Party” has the meaning set forth in Section 11.3 (Indemnification Procedure).

1.90

“Initial E.U. MAA” has the meaning set forth in Section 3.2.1 (Preparation of the Initial U.S. MAA and the Initial E.U. MAA).

1.91

“Initial U.S. MAA” has the meaning set forth in Section 3.2.1 (Preparation of the Initial U.S. MAA and the Initial E.U. MAA).

1.92

“Invention” means any new and useful process, method, manufacture, or composition of matter, know-how, or other invention that is conceived and first reduced to practice, constructively or actually, by either Party or jointly by the Parties in connection with the performance of activities under this Agreement.

1.93

“Joint Know-How” means any Know-How, developed or invented during the Term in the performance of activities under this Agreement jointly by a Party or such Party’s or its Affiliates’, licensees’, Sublicensees’, or Subcontractors’ employees, agents, or independent contractors, or any other Persons, in each case, that are contractually required

1.94

“Joint Patent Rights” means any Patent Right that has a priority date after the Effective Date, and that Covers any Invention included in the Joint Know-How.

1.95

“Joint Technology” means the Joint Know-How and the Joint Patent Rights.

1.96

“JSC” has the meaning set forth in Section 7.2.1 (Formation and Purpose of JSC).

1.97

“Know-How” means any proprietary information or materials, including records, discoveries, improvements, modifications, processes, techniques, methods, assays, chemical or biological materials, designs, protocols, formulas, data (including physical data, chemical data, toxicology data, animal data, raw data, clinical data, and analytical and quality control data), dosage regimens, control assays, product specifications, marketing, pricing and distribution costs, Inventions, algorithms, technology, forecasts, profiles, strategies, plans, results in any form whatsoever, know-how and trade secrets (in each case, patentable, copyrightable or otherwise).

1.98

“Knowledge” means (a) with respect to uniQure, the actual knowledge, as of the Execution Date, of the uniQure individuals in the roles set forth in part (a)(i) of Schedule 1.98, and, for the purposes of Section 10.2.6 (Representations and Warranties of uniQure), the individuals in the roles set forth in part (a)(ii) of Schedule 1.98, and (b) with respect to Partner, the actual knowledge, as of the Execution Date, of the Partner individuals in the roles set forth in part (b) of Schedule 1.98 as of such date.

1.99

“Lead Product” means AMT-061, in any dosage strength, concentration, or formulation.

1.100

“Licensed Product” means (a) the Lead Product and (b) any Variant.

1.101

“Loss of Market Exclusivity” means, with respect to a Licensed Product in a country in the Territory, the date on which (a) one or more Abbreviated Approval Products are being marketed in such country; and (b) the number of unit equivalents of such Abbreviated Approval Products sold in such country in a particular Financial Quarter equals or exceeds [*]% of the number of units of such Licensed Product sold in such country in such Financial Quarter.

1.102

“Losses” means damages, debts, obligations, and other liabilities, losses, claims, taxes, interest obligations, deficiencies, judgments, assessments, fines, fees, penalties, or expenses (including amounts paid in settlement, interest, court costs, costs of investigators, reasonable fees and expenses of attorneys, accountants, financial advisors, consultants, and other experts, and other expenses of litigation), subject to Section 16.2 (Limitation of Liability).

1.103

“Major Country” means each of [*].

1.104

“Manufacture” means activities directed to manufacturing, processing, packaging, labeling, filling, finishing, assembly, shipping, storage, or freight of any pharmaceutical or biologic product (or any components or process steps involving any such product), placebo, or comparator agent, as the case may be, including quality assurance and stability testing, characterization testing, quality control release testing of drug or biologic substance and drug or biologic product, quality assurance batch record review and release of product, process development, qualification, and validation, scale-up, pre-clinical, clinical, and commercial manufacture and analytic development, and product characterization, but excluding activities that constitute Development, performance of Medical Affairs, or Commercialization. “Manufacturing” and “Manufactured” will be construed accordingly.

1.105

“Manufacturing Development Plan” has the meaning set forth in Section 5.2 (Manufacturing Development Plan).

1.106

“Manufacturing Development Plan Required Change Amount” has the meaning set forth in Section 7.5.2(b)(ii) (Partner Decisions).

1.107

“Manufacturing Process” has the meaning set forth in the Supply Agreement.

1.108

“Manufacturing Responsibility Cutover Date” has the meaning set forth in Section 5.3.3 (Manufacturing Responsibility Transfer Plan).

1.109

“Manufacturing Responsibility Transfer Notice Date” has the meaning set forth in Section 5.3.2 (Transfer of Manufacturing Responsibility).

1.110

“Manufacturing Responsibility Transfer Plan” has the meaning set forth in Section 5.3.3 (Manufacturing Responsibility Transfer Plan).

1.111

“▇▇▇▇” means any trademark, trade name, service ▇▇▇▇, service name, product name, brand, domain name, trade dress, logo, slogan, or other indicia of origin or ownership, and (a) all registrations, applications for registrations, and other similar intellectual property rights associated with any of the foregoing, and (b) the goodwill associated with each of the foregoing.

1.112

“Marketing Authorization Application” or “MAA” means any biologics license application or other marketing authorization application, in each case, filed with the applicable Regulatory Authority in a country or other regulatory jurisdiction, which application is required to commercially market or sell a pharmaceutical or biologic product in such country or jurisdiction (and any amendments thereto), including (i) any marketing authorization application filed with the EMA under the centralized EMA filing procedure to gain approval to market a pharmaceutical or biologic product in the E.U. or a Regulatory Authority in any E.U. country if the centralized EMA filing procedure is not used to gain approval to market a pharmaceutical or biologic product in the E.U. and (ii) all Biologics License Applications (“BLAs”) or equivalent submitted to the FDA in the United States in accordance with 42 U.S.C. § 262 and, in each case, any amendments thereto and supplemental applications, but excluding Reimbursement Approval applications.

1.113

“Material Change to the Manufacturing Section” has the meaning set forth in Section 3.3 (Other Regulatory Submissions).

1.114

“Medical Affairs” means activities conducted by a Party’s medical affairs departments (or, if a Party does not have a medical affairs department, the equivalent function thereof), including communications with key opinion leaders, medical education, symposia, advisory boards (to the extent related to medical affairs or clinical guidance), activities performed in connection with patient registries, and other medical programs and communications, including educational grants, research grants (including conducting investigator-initiated studies), and charitable donations to the extent targeted or directed to medical affairs.

1.115

“Milestone Events” has the meaning set forth in Section 8.2.3 (Notification of Milestone Events).

1.116

“Milestone Payment” has the meaning set forth in Section 8.2.3 (Notification of Milestone Events).

1.117

“Net Sales” means with respect to a Licensed Product, the gross amount invoiced or received by or for the benefit of Partner and its Affiliates and Sublicensees (each of the foregoing, a “Seller”) to a Third Party (including Third Party Distributors) (“Buyers”) in bona fide arm’s length transactions within the Territory with respect to such Licensed Product, less the following deductions, in each case, to the extent actually allowed and taken by such Buyers and not otherwise recovered by or reimbursed to Seller in connection with such Licensed Product:

(a)

transportation, shipping, freight, handling, and insurance costs incurred in transporting such Licensed Product to Buyers, to the extent actually incurred and itemized;

(b)

sales, excise taxes, tariffs, and duties paid by the Seller and any other governmental charges or taxes imposed specifically upon the sale, transportation, delivery, use, exportation, or importation of such Licensed Product and actually paid;

(c)

usual and customary discounts and rebates actually allowed and taken (including trade, cash and quantity discounts and rebates) in connection with the sale of such Licensed Product to the extent not attributable to other products of Partner or its Affiliates;

(d)

sales returns, allowances, refunds, or credits to such Buyer actually given or other amounts actually repaid by Seller and not in excess of the selling price of such Licensed Product on account of inefficacy (in whole or in part) rejection, outdating, recalls, price adjustments, or billing errors of or with respect to such Licensed Product;

(e)

discounts actually paid under government-legislated or Seller-sponsored discount prescription drug programs or other similar coupon or voucher programs;

(f)

rebates, reimbursements, fees, clawbacks, discounts, charge-backs, or similar payments paid or credited to Third Party Distributors, pharmacies and other retailers, buying groups (including group purchasing organizations), health care insurance carriers, Third Party payor, administrator, or contractee, pharmacy benefit management companies, health maintenance organizations, Governmental Authorities, hospitals, or other institutions or health care organizations, to the extent such payments are not attributable to other products of Partner or its Affiliates or Sublicensees or other services of Partner or its Affiliates or Sublicensees that are unrelated to the sales and distribution of the Licensed Product;

(g)

bad debt expenses and amounts actually written off as uncollectible; and

(h)

expenses actually incurred by a Seller [*], up to the lesser of (i) [*] or (ii) [*] less any deductions pursuant to clauses (a) through (g) above.

1.118

“OFAC” means the Office of Foreign Assets Control of the United States Department of the Treasury or any successor agency thereto.

1.119

“Outside Date” has the meaning set forth in Section 15.5 (Outside Date).

1.120

“Partner” has the meaning set forth in the Preamble.

1.121

“Partner Commercialization Plan” has the meaning set forth in Section 6.4 (Commercialization Plan).

1.122

“Partner Development Plan” has the meaning set forth in Section 4.2 (Partner Development Plan).

1.123

“Partner Housemarks” means (a) the corporate logo of Partner or any of its Affiliates, (b) the trademarks “CSL” and “CSL BEHRING”, (c) any other ▇▇▇▇ (whether registered or unregistered) containing the word “CSL” or “BEHRING”, (d) any other corporate logo or any other ▇▇▇▇ (i) used by Partner or any of its Affiliates to identify Partner or its Affiliates or to refer to any product (other than a Licensed Product) or (ii) used by Partner or any of its Affiliates with patient support or other information or services or Promotional Materials associated with any product (other than a Licensed Product), (e) all registrations, applications for registrations, and other similar intellectual property rights associated with any of the foregoing, and (f) all goodwill associated with any and all of the foregoing in clauses (a) through (e).

1.124

“Partner Indemnitee(s)” has the meaning set forth in Section 11.2 (Indemnification; By uniQure).

1.125

“Partner Know-How” means all Know-How (excluding Partner’s interest in any Joint Know-How) that (i) is Controlled by Partner or any of its Affiliates as of the Effective Date or during the Term, and (ii) is necessary or reasonably useful for the Exploitation of any Licensed Product.

1.126

“Partner Manufacturing Improvements” means any Invention that is an improvement to the method used in Manufacturing any Licensed Product (or any components thereof); that is developed or invented during the Term by Partner’s or its Affiliates’, licensees’, Sublicensees’, or Subcontractors’ employees, agents, or independent contractors, or any other Person, in each case, if such Person is contractually required to assign or license

1.127

“Partner Manufacturing Patent Right” means any Patent Right with a priority date after the Effective Date that Covers any Partner Manufacturing Improvement.

1.128

“Partner Manufacturing Technology” means Partner Manufacturing Improvements and Partner Manufacturing Patent Rights.

1.129

“Partner Patent Rights” means all Patent Rights that (a) are Controlled by Partner or any of its Affiliates as of the Effective Date or during the Term, and (b) Cover the Exploitation of any Licensed Product.

1.130

“Partner Regulatory Activities” has the meaning set forth in Section 3.1.1 (Regulatory Activities).

1.131

“Partner Technology” means Partner Know-How, Partner Patent Rights, and Partner’s interest in the Joint Technology.

1.132

“Party” or “Parties” has the meaning set forth in the Preamble.

1.133

“Patent Challenge” has the meaning set forth in Section 13.2.3 (Termination for Patent Challenge).

1.134

“Patent Prosecution” means any activities directed to (a) preparing, filing, and prosecuting applications (of all types) for any Patent Right (including any adversarial proceedings at a patent office related thereto), (b) maintaining any Patent Right (including any adversarial proceedings at a patent office related thereto, such as IPRs, PGRs, re-examinations, oppositions, or equivalent actions), and (c) deciding whether to abandon or maintain any Patent Right.

1.135

“Patent Rights” means (a) all patents and patent applications in any country or region, (b) all patent applications filed either from such patents or patent applications or from an application claiming priority from any of these, including divisionals, continuations, continuations-in-part, provisionals, converted provisionals, and continued prosecution applications, (c) any and all patents that have issued or in the future issue from the foregoing patent applications, and (d) any and all substitutions, renewals, registrations, confirmations, extensions, or restorations, including revalidations, reissues, and re-examinations (including any supplementary protection certificates and the like) of the foregoing patents or patent applications.

1.136

“Person” means any corporation, limited or general partnership, limited liability company, joint venture, joint stock company, trust, unincorporated association, governmental body, authority, bureau, or agency, or any other entity or body, or an individual.

1.137

[*] has the meaning set forth in Section 10.6.3 [*].

1.138

[*] has the meaning set forth in Section 10.6.3 [*].

1.139

“Phase III Clinical Trial” means a clinical trial in humans of a pharmaceutical or biologic product performed to gain evidence with statistical significance of the efficacy of such product in a target population, and to obtain expanded evidence of safety and, if applicable, tolerability for such product that is needed to evaluate the overall benefit-risk relationship of such product, to form the basis for approval of an MAA by a Regulatory Authority and to provide an adequate basis for physician labeling, in a manner that is generally consistent with 21 C.F.R. § 312.21(c), as amended (or its successor regulation), or, with respect to any other country or region, the equivalent of such a clinical trial in such other country or region.

1.140

“Product Infringement” has the meaning set forth in Section 12.5.1 (Patent Enforcement; Notice).

1.141

“Product Labeling” means prescribing information, patient labeling, and carton and container labeling.

1.142

“Product Marks” means any ▇▇▇▇ (whether registered or unregistered), other than a uniQure Housemark or a Partner Housemark, for use on, with, or to refer to a Licensed Product or used with patient support or other information or services or Promotional Materials associated with a Licensed Product in the Territory during the Term, together with (a) all registrations, applications for registrations, and other intellectual property rights associated with any of the foregoing, and (b) the goodwill associated with each of the foregoing.

1.143

“Product Specifications” has the meaning set forth in the Supply Agreement.

1.144

“Project Manager” has the meaning set forth in Section 7.6 (Project Management).

1.145

“Project Team” has the meaning set forth in Section 7.6 (Project Management).

1.146

“Promotional Materials” means all written, printed, graphic, electronic, audio or video matter, including journal advertisements, sales visual aids, leave behind items, formulary binders, reprints, direct mail, direct-to consumer advertising, Internet postings, broadcast advertisements and sales reminder aids (for example, scratch pads, pens and other like items), in each case, created by a Party or on its behalf and used or intended for use in connection with any promotion of any Licensed Product in the Field in the Territory.

1.147

“Publication” has the meaning set forth in Section 9.7 (Publications).

1.148

“Receiving Party” has the meaning set forth in Section 9.1.1 (Duty of Confidence).

1.149

“Regulatory Approval” means, with respect to a particular country or other regulatory jurisdiction, any approval of an MAA or other approval, product, or establishment license, registration, or authorization of any Regulatory Authority necessary for the commercial marketing, manufacture, importation, exportation or sale of a pharmaceutical or biologic product in such country or other regulatory jurisdiction, excluding, in each case, a Reimbursement Approval.

1.150

“Regulatory Authority” means, in a particular country or jurisdiction, any applicable Governmental Authority involved in granting Regulatory Approval or Reimbursement Approval in such country or jurisdiction, including (a) in the E.U., the EMA and any other applicable Governmental Authority in the E.U. having jurisdiction over any pharmaceutical or biologic product, (b) in the U.S., the FDA, the Centers for Medicare & Medicaid Services and any other applicable Governmental Authority in the U.S. having jurisdiction over any pharmaceutical, companion diagnostic, or biologic product, and (c) in other countries, other analogous Governmental Authorities having jurisdiction over any pharmaceutical or biologic product.

1.151

“Regulatory Exclusivity” means, [*].

1.152

“Regulatory Milestone Events” has the meaning set forth in Section 8.2.1 (Regulatory Milestones).

1.153

“Regulatory Milestone Payment” has the meaning set forth in Section 8.2.1 (Regulatory Milestones).

1.154

“Regulatory Responsible Party” means Partner; provided that, as between the Parties, uniQure will remain the Regulatory Responsible Party to the extent that uniQure is required by Applicable Law or any Regulatory Authority in the Territory [*].

1.155

“Regulatory Submissions” means any filing, application, or submission with any Regulatory Authority in support of Developing, Manufacturing, or Commercializing a pharmaceutical or biologic product (including to obtain, support, or maintain Regulatory Approval from that Regulatory Authority), and all substantive correspondence or communication with or from the relevant Regulatory Authority, as well as minutes of any substantive meetings, telephone conferences, or discussions with the relevant Regulatory Authority.  Regulatory Submissions include all INDs, ▇▇▇▇, and other applications for Regulatory Approval and Reimbursement Approvals and each of their equivalents.

1.156

“Reimbursement Approval” means an approval, agreement, determination, or other decision by the applicable Governmental Authority that establishes prices charged to end-users for pharmaceutical or biologic products at which a particular pharmaceutical or biologic product will be reimbursed by the Regulatory Authorities or other applicable Governmental Authorities or Persons with contracted arrangements with applicable Regulatory Authorities or Governmental Authorities in the Territory.

1.157

“Review Period” has the meaning set forth in Section 9.6 (Publications).

1.158

“Royalties” has the meaning set forth in Section 8.3.1 (Royalty Payments).

1.159

“Royalty Rates” has the meaning set forth in Section 8.3.1 (Royalty Payments).

1.160

“Royalty Report” has the meaning set forth in Section 8.3.3(b) (Royalty Report).

1.161

“Royalty Term” has the meaning set forth in Section 8.3.1 (Royalty Payments).

1.162

“Sales Milestone Events” has the meaning set forth in Section 8.2.2 (Sales Milestones).

1.163

“Sales Milestone Payment” has the meaning set forth in Section 8.2.2 (Sales Milestones).

1.164

“SDE Agreement” has the meaning set forth in Section 3.8.2 (SDE Agreements).

1.165

“Seller” has the meaning set forth in Section 1.117 (Net Sales).

1.166

“Specified CMO” has the meaning set forth in Section 2.2.2 (Right to Subcontract).

1.167

“Subcontractor” means a Third Party contractor engaged by a Party or its Affiliates to perform certain services for such Party or its Affiliates under this Agreement on a fee-for-service basis (including CMOs, contract research organizations, contract sales forces or similar Persons).

1.168

“Sublicensee” means any Person to whom a Party or its Affiliates grants a sublicense of, or other authorization or permission granted under, the rights granted to a Party under this Agreement (e.g., a Person who has rights to Commercialize the Licensed Product in a particular country in the Territory), excluding all Subcontractors.

1.169

“Supply Agreement” has the meaning set forth in Section 5.1 (Supply Agreement).

1.170

“Tax” or “Taxes” means any present or future taxes, levies, imposts, duties, charges, assessments or fees of any nature (including any interest thereon), including value add taxes (“VAT”).

1.171

“Term” has the meaning set forth in Section 13.1 (Term).

1.172

“Territory” means all countries and territories of the world.

1.173

“Territory Sponsor” means, with respect to a Clinical Trial for a Licensed Product to be conducted at sites in the Territory, the Party that holds the IND from the applicable Regulatory Authority in the Territory for such Clinical Trial in its name.

1.174

“Third Party” means any Person other than a Party or an Affiliate of a Party.

1.175

“Third Party Claims” means collectively, any and all Third Party demands, claims, actions, suits, and proceedings (whether criminal or civil, in contract, tort, or otherwise).

1.176

“Third Party Distributor” means any Third Party that purchases Licensed Product from Partner or its Affiliates or Sublicensees, takes title to such Licensed Product, and distributes such Licensed Product directly to customers, but does not Develop or Manufacture any Licensed Product and does not make any royalty, profit-share, or other payment to Partner or its Affiliates or Sublicensees, other than payment for the purchase of Licensed Product for resale.

1.177

“Third Party Royalty Payments” means, with respect to a Licensed Product, royalty payments made by Partner to a Third Party pursuant to an agreement between Partner and

1.178

“uniQure” has the meaning set forth in the Preamble.

1.179

“uniQure Additional Development Activities” means (a) those Development activities, other than those conducted under the Current Phase III Protocol, performed by uniQure following the Execution Date in accordance with the uniQure Development Budget therefor, and (b) any other Development activities that the JSC determines uniQure will conduct pursuant to Section 4.1.3 (uniQure Additional Development Activities).

1.180

“uniQure Additional Development Budget” has the meaning set forth in Section 4.1.3 (uniQure Additional Development Activities).

1.181

“uniQure Additional Development Plan” has the meaning set forth in Section 4.1.3 (uniQure Additional Development Activities).

1.182

“uniQure Development Activities” means all Development activities performed by or on behalf of uniQure in furtherance of the Current Phase III Protocol and all uniQure Additional Development Activities.

1.183

“uniQure Development Budget” has the meaning set forth in Section 4.4.1 (uniQure Development Budget).

1.184

“uniQure Housemarks” means (a) the corporate logo of uniQure or any of its Affiliates, (b) the trademark “uniQure,” (c) any other ▇▇▇▇ (whether registered or unregistered) containing the word “uniQure,” (d) any other corporate logo or other ▇▇▇▇ used by uniQure to identify uniQure or its Affiliates, (e) all registrations, applications for registrations, and other intellectual property rights associated with any of the foregoing, and (f) all goodwill associated with any and all of the foregoing in clauses (a) through (e).

1.185

“uniQure Indemnitee(s)” has the meaning set forth in Section 11.1 (Indemnification; By Partner).

1.186

“uniQure Interim Development and Manufacturing Development Plan” has the meaning set forth in Section 10.6.2 (uniQure Additional Covenants Prior to the Effective Date).

1.187

“uniQure Know-How” means all Know-How (excluding uniQure’s interest in Joint Know-How) that is (a) Controlled by uniQure or any of its Affiliates as of the Effective Date or during the Term, and (b) necessary or reasonably useful to Exploit (i) one or more Licensed Products or (ii) the AAV5 NAb Assay in connection with the Licensed Products, in each case ((i) and (ii)), in the Field in the Territory in accordance with this Agreement. uniQure Know-How includes the uniQure Manufacturing Know-How.

1.188

“uniQure Manufacturing Know-How” means all Know-How, other than Joint Know-How, that is (a) Controlled by uniQure or any of its Affiliates as of the Effective Date or during the Term, and (b) related to a step or method of Manufacturing used to Manufacture any Licensed Product.

1.189

“uniQure Manufacturing Patent Rights” means all Patent Rights, other than Joint Patent Rights and uniQure Product Patent Rights, that are (a) Controlled by uniQure or any of its Affiliates as of the Effective Date or during the Term, and (b) Cover a step or method of Manufacturing used to Manufacture any Licensed Product.

1.190

“uniQure Manufacturing Specified Patent Rights” means any uniQure Patent Right that contains claims that Cover and specifically recite a step or method used to Manufacture a Licensed Product, and do not Cover a step or method of Manufacturing (a) used to Manufacture any product Controlled by uniQure or any of its Affiliates other than a Licensed Product or (b) that may be used generally with Gene Therapy Products other than a Licensed Product.

1.191

“uniQure Patent Rights” means all Patent Rights (excluding uniQure’s interest in Joint Patent Rights) that are (a) Controlled by uniQure or any of its Affiliates as of the Effective Date or during the Term, and (b) necessary or reasonably useful (or, with respect to patent applications, would be necessary or reasonably useful if such patent applications were to issue as patents) to Exploit (i) one or more Licensed Products or (ii) the AAV5 NAb Assay in connection with the Licensed Products, in each case ((i) and (ii)), in the Field in the Territory in accordance with this Agreement.  uniQure Patent Rights include the uniQure Platform Patent Rights, uniQure Product Patent Rights, and uniQure Manufacturing Patent Rights.  Schedule 10.2.2 (uniQure Patent Rights) sets forth the uniQure Patent Rights that are owned or exclusively licensed by uniQure or any of its Affiliates in the Territory and that exist as of the Execution Date.

1.192

“uniQure Platform Patent Rights” means any uniQure Patent Rights other than the uniQure Product Patent Rights and uniQure Manufacturing Patent Rights.  Without limitation, uniQure Platform Patent Rights include Patent Rights that Cover the AAV5 capsid, the LP1 promoter, dosing without screening for preexisting neutralizing antibodies, and redosing.

1.193

“uniQure Product Patent Rights” means any uniQure Patent Right that contains claims that (a) Cover and specifically recite (i) a composition of matter that includes the Licensed Product or a transgene for the Padua variant of Factor IX, or (ii) a method of use of any such composition of matter set forth in the foregoing clause (i) and (b) do not Cover (A) any product Controlled by uniQure or any of its Affiliates other than a Licensed Product, (B) any component of a Licensed Product that may be used in products that do not deliver the Padua variant of Factor IX, such the AAV5 capsid or the LP1 promoter, or (C) any method of use that may be used with products that do not deliver the Padua variant of Factor IX, such as dosing without screening for preexisting neutralizing antibodies or redosing.

1.194

“uniQure Royalty Patent Rights” means [*].

1.195

“uniQure Technology” means uniQure Know-How, uniQure Patent Rights, and uniQure’s interest in the Joint Technology.

1.196

“United States” or “U.S.” means the United States of America and its territories and possessions.

1.197

“Upfront Payment” has the meaning set forth in Section 8.1 (Upfront Payment).

1.198

“U.S. Antitrust Filing” has the meaning set forth in Section 15.2 (Antitrust Filings).

1.199

“Valid Claim” means: (a) a claim of an issued and unexpired patent (as may be adjusted through a patent term adjustment or extended through supplementary protection certificate or patent term extension or the like) that has not been revoked, held invalid, or held unenforceable by a patent office or other Governmental Authority of competent jurisdiction in a final and non-appealable judgment (or judgment from which no appeal was taken within the allowable time period); or (b) a pending claim (i) of an unissued, pending patent application within the uniQure Royalty Patent Rights or (ii) claiming priority from a patent or patent application within the uniQure Royalty Patent Rights, provided that in each case such pending claim shall cease to be a Valid Claim, [*], unless and until such claim becomes an issued claim of an issued patent, in which case it will again be considered a Valid Claim under the foregoing clause (a) from the date the patent issues and for as long as it meets the requirements of clause (a).

1.200

“Valid Encryption Process” has the meaning set forth in Section 3.7 (Security).

1.201

“Variant” means an improved or modified product iteration derived from the Lead Product that has or is intended to have pharmacological properties substantially similar to, or superior to, the properties of the composition of the Lead Product, such as codon optimization, an improved capsid, or an improved promoter. “Variant” includes [*] but excludes [*].

1.202

“VAT” has the meaning set forth in Section 1.170 (Tax).

1.203

“Withholding Party” has the meaning set forth in Section 8.13 (Taxes).

2.1

License Grants to Partner.

2.1.1

Licensed Products.  Subject to the terms of this Agreement (including uniQure’s retained rights set forth in Section 2.4 (Retained Rights)), uniQure hereby grants to Partner an exclusive (even as against uniQure and its Affiliates except as expressly set forth in the last sentence of Section 2.4 (Retained Rights)), royalty-bearing license, with the right to grant sublicenses through multiple tiers solely in accordance with Section 2.2 (Sublicensing and Subcontractors), under the uniQure Technology solely to Exploit the Licensed Products in the Field in the Territory in accordance with this Agreement.

2.1.2

AAV5 NAb Assay.  Subject to the terms of this Agreement (including uniQure’s retained rights set forth in Section 2.4 (Retained Rights)), uniQure hereby grants to Partner an exclusive (even as against uniQure and its Affiliates except as expressly set forth in the last sentence of Section 2.4 (Retained Rights)), fully paid-up, royalty-free license, with the right to grant sublicenses through multiple tiers solely in accordance with Section 2.2 (Sublicensing and Subcontractors), under the uniQure Technology solely to Exploit the AAV5 NAb Assay in connection with the Licensed Products in the Field in the Territory in accordance with this Agreement.

2.2

Sublicensing and Subcontractors.

2.2.1

Right to Sublicense.  Subject to the terms of this Agreement, Partner will have the right to grant to one or more of its Affiliates, and Partner and its sublicensed Affiliates will have the right to sublicense to its or their respective Subcontractors and Sublicensees sublicenses of the rights granted to Partner under Section 2.1 (License Grants to Partner) without uniQure’s prior written consent, except for a sublicense to (i) a Third Party of all or substantially all of Partner’s or its Affiliates’ rights under this Agreement with respect to one or more Major Countries; or (ii) a CMO that is not one of the Persons set forth on Schedule 2.2.1 (each, a “Specified CMO”), if Partner anticipates transferring any uniQure Manufacturing Technology to such CMO, in which case of clause (i) or (ii), the grant of such sublicenses shall require uniQure’s prior written consent, which shall not be unreasonably withheld.  Any termination of the licenses granted to Partner under Section 2.1 (License Grants to Partner) will cause the permitted Subcontractors or Sublicensees to automatically lose the same rights under any sublicense.

2.2.2

Right to Subcontract.  Subject to Section 2.2.1 (Right to Sublicense), Section 2.2.4 (Terms of Sublicenses and Subcontracting Agreements), and Section 2.2.6 (Responsibility for Sublicensees and Subcontractors) and the remainder of this Section 2.2.2 (Right to Subcontract), each Party may engage one or more Subcontractors to perform services in furtherance of the performance of its obligations under this Agreement; provided that (a) neither Party will engage any such Subcontractor that has been Debarred/Excluded; and (b) no engagement of any such Subcontractors will relieve the engaging Party of its obligations under this Agreement or any liability hereunder.  If Partner proposes to engage a CMO to Manufacture any Licensed Product, then Partner will notify uniQure in advance of the identity of such CMO and the activities that Partner proposes such CMO will perform and Partner will consider in good faith any comments of uniQure prior to engaging such CMO, the engagement of which CMO will not require uniQure’s consent, except as set forth in Section 2.2.1 (Right to Sublicense).

2.2.3

Notice of Sublicenses.  Partner will provide uniQure with a true and complete copy of each sublicense agreement with any Subcontractor or Sublicensee no later than [*] after it becomes effective, subject to Partner’s right to redact any confidential or proprietary information contained therein that is not necessary for uniQure to (a) determine compliance with the terms of this Agreement or (b) comply with any

2.2.4

Terms of Sublicenses and Subcontracting Agreements.  Each sublicense granted by Partner and each subcontracting agreement entered into by either Party pursuant to Section 2.2.1 (Right to Sublicense) or Section 2.2.2 (Right to Subcontract), as applicable, will (a) be subject and subordinate to this Agreement, (b) be consistent with the applicable terms of this Agreement, (c) include obligations of confidentiality and non-use applicable to the Confidential Information of the other Party that are at least as stringent as those set forth in Article 9 (Confidentiality; Publication), (d) include terms that are consistent with the intellectual property provisions set forth in this Agreement, including an assignment or license (sublicensable through multiple tiers) back to the subcontracting or sublicensing Party of all Patent Rights and Know-How necessary or reasonably useful to Exploit any Licensed Product in the Field in the Territory (such that such Party Controls such Patent Rights and Know-How for the purposes of this Agreement), and (e) for a sublicense of Partner’s Commercialization rights to Sublicensees, include a provision giving uniQure the right to enforce the applicable terms of such sublicense directly against the Sublicensee, effective after [*] written notice to Partner, in the event that the Sublicensee breaches the sublicense in a manner that ▇▇▇▇▇ uniQure, and Partner does not cause the Sublicensee to cure such breach or terminate the applicable sublicense within the deadlines set forth in the applicable sublicense agreement.

2.2.5

Reports of Sublicensees and Subcontractors.  Each Party will provide the other Party with all information that is reasonably necessary for the other Party to confirm compliance with this Agreement by any Sublicensees or Subcontractors no later than [*] in advance of each JSC meeting (or otherwise upon a Party’s request, if reasonably justified under the circumstances).

2.2.6

Responsibility for Sublicensees and Subcontractors.  Each Party will require that all Sublicensees and Subcontractors perform the activities that they are sublicensed or engaged to perform (as applicable) in accordance with GLP, cGMP, and GCP, as applicable, and otherwise in compliance with Applicable Law.  Notwithstanding the grant of any sublicense or engagement of any Subcontractor, each Party will remain primarily liable to the other Party for the performance of such Party’s obligations under, and such Party’s compliance with all provisions of, this Agreement.  Each Party will be fully responsible and liable for any breach of the terms of this Agreement by any of its Sublicensees or Subcontractors to the same extent as if such Party itself has committed any such breach (provided that a Party may not recover twice against the other Party and such Sublicensees or Subcontractors for the same breach) and will terminate promptly the agreement with any Sublicensee or Subcontractor if such Sublicensee or Subcontractor Defaults under this Agreement in a manner that materially ▇▇▇▇▇ the other Party and does not cure such Default in a timely manner.

2.3

License Grants to uniQure.

2.3.1

Partner Technology License. Subject to the terms of this Agreement (including the exclusive licenses granted to Partner hereunder), Partner hereby grants to uniQure a non-exclusive royalty-free license (with the right to grant sublicenses through multiple tiers, subject to the use restrictions below and in Section 2.2 (Sublicensing and Subcontractors)), under the Partner Technology for use solely to the extent necessary to perform uniQure’s obligations under this Agreement.

2.3.2

Manufacturing Technology License.  Subject to the terms of this Agreement, Partner hereby grants and agrees to grant to uniQure a royalty-free, fully paid-up, worldwide, non-exclusive, perpetual, irrevocable license (with the right to grant sublicenses through multiple tiers) under the Partner Manufacturing Technology for use solely in connection uniQure’s proprietary manufacturing process [*] (and not for standalone use) (a) to perform uniQure’s obligations under this Agreement and (b) for any other purpose, other than to Exploit any Licensed Product or Competitive Product in the Field in the Territory.

2.4

Retained Rights.  Nothing in this Agreement will be interpreted to grant Partner any rights under any intellectual property rights owned or Controlled by uniQure, including uniQure Technology, that are not expressly granted herein, whether by implication, estoppel, or otherwise.  Any rights not expressly granted to Partner by uniQure under this Agreement are hereby retained by uniQure. In addition, notwithstanding the exclusive license in Section 2.1 (License Grants to Partner) or any other provision to the contrary set forth in this Agreement, uniQure and its Affiliates expressly retain the right to (a) Manufacture the Licensed Products in the Territory for Partner hereunder and (b) perform the uniQure Development Activities and uniQure’s other obligations under this Agreement.

2.5

Existing In-Licenses.  Notwithstanding any provision to the contrary set forth in this Agreement, Partner or uniQure (as applicable) stipulates and agrees that (a) the rights and licenses granted to Partner under this Agreement are subject to the applicable terms of all Existing In-Licenses with respect to the uniQure Technology that is being sublicensed thereunder, to the extent that such terms have been provided to Partner prior to the Execution Date in an unredacted copy of the applicable Existing In-License (but, for clarity, Partner is not assuming any of uniQure’s obligations under any Existing In-License, and uniQure remains solely liable for all fees, royalties, and other obligations thereunder), (b) uniQure’s ability to comply with its obligations to Partner under this Agreement is subject to the requirements and restrictions imposed on uniQure under the Existing In-Licenses (to the extent provided by uniQure to Partner in unredacted form) with respect to the uniQure Technology that is being sublicensed under such Existing In-Licenses, (c) uniQure will not be required to take any action or inaction that would cause uniQure to be in breach of any Existing In-License to the extent the terms thereof were provided to Partner in an unredacted form prior to the Execution Date, (d) uniQure shall take those actions and exercise those rights under the Existing In-Licenses (including rights arising in a bankruptcy of any party thereto) as necessary to protect and maintain Partner’s rights under this Agreement, (e) uniQure shall not terminate (or take any action to cause the termination of) or fail to renew any Existing In-License without Partner’s prior written

2.6

Exclusivity Covenant.  Each Party covenants and agrees that neither it nor any of its Affiliates (including, in the case of uniQure, Affiliates of uniQure NV and, in the case of Partner, Affiliates of CSL Limited) will, either alone or in collaboration with (including pursuant to a license from or to) any Third Party, (a) submit any IND for, or, in the event that the submission of an IND is not required by Applicable Law in a particular country or jurisdiction, begin dosing any patient in such country or jurisdiction in any clinical trial for, any Competitive Product during the period commencing as of the Execution Date and continuing until [*], or (b) Commercialize any Competitive Product during the period commencing as of the Execution Date and continuing until [*].  Notwithstanding anything to the contrary set forth in this Agreement, in the event that uniQure is acquired by a Third Party and such Third Party owns or controls a Competitive Product, the further Exploitation of such Competitive Product (or commencement of Exploitation of a Competitive Product) by such Third Party acquirer or its Affiliates after the consummations of the applicable acquisition transaction will not constitute a violation of this Section 2.6 (Exclusivity Covenant) so long as (i) such Third Party acquirer and its Affiliates shall not use or have access to any Confidential Information of Partner (whether relating to the clinical Development or Commercialization of any Licensed Products or otherwise) and (ii) no personnel of such Third Party acquirer and its Affiliates involved in performing clinical Development or Commercialization of such Competitive Product shall use or have access to any uniQure Technology.

3.1

Regulatory Responsibilities.

3.1.1

Regulatory Activities.  Except as contemplated by Section 3.1.2 (Partner Requests) and Section 3.1.3 (Required by Law) and as set forth in Section 3.2 (Preparation of the Initial U.S. MAA and the Initial E.U. MAA) and Section 3.3 (Other Regulatory Submissions), and the Partner Development Plan, Partner shall have sole authority, control, and decision-making authority with respect to all regulatory activities, filings, ▇▇▇▇, and other Regulatory Submissions.  Partner, itself or through its designee, at its sole cost and expense, will be the Regulatory Responsible Party and accordingly will be solely responsible for, and have decision-making authority with respect to all regulatory activities with respect to the Licensed Products in the Territory, including the filings of all ▇▇▇▇, applications for Reimbursement Approvals, and other Regulatory Submissions and in relation to all activities required to obtain, support, or maintain Regulatory Approval or Reimbursement Approval for the Licensed Products in the Territory, except as contemplated by Section 3.1.2 (Partner Requests) and Section 3.1.3 (Required by Law) (the “Partner Regulatory Activities”).

3.1.2

Partner Requests.  Partner will have sole authority, control, and decision-making authority with respect to ▇▇▇▇ and Regulatory Submissions, but may request uniQure’s support for the preparation of any MAA or Regulatory Submissions related thereto or for seeking and maintaining Regulatory Approvals or Reimbursement Approvals for the Licensed Products.

3.1.3

Required by Law.  Partner will have sole authority, control, and decision-making power with respect to ▇▇▇▇ and Regulatory Submissions, but if uniQure is required by Applicable Law or Regulatory Authorities in the Territory [*], then uniQure will remain the Regulatory Responsible Party with respect to each of the activities set forth in the foregoing clauses (a) and (b).

3.2

Preparation of the Initial U.S. MAA and the Initial E.U. MAA.

3.2.1

Collaboration.  The Parties’ regulatory teams will collaborate to prepare the first MAA for a Licensed Product to be submitted to the FDA in the U.S. (the “Initial U.S. MAA”), the first MAA for a Licensed Product to be submitted to the EMA (the “Initial E.U. MAA”), and all Regulatory Submissions related thereto, but Partner shall have sole decision-making authority over and control of all Regulatory Submissions.  If any such Regulatory Submission is due during the regulatory transfer period described in Section 3.5.1 (Regulatory Transfer), or if uniQure is required to be the Regulatory Responsible Party for any such Regulatory Submission, then Partner shall direct, oversee, review, and approve any Regulatory Submission by uniQure, and uniQure shall act in accordance with Partner’s reasonable direction, and uniQure shall transfer and assign to Partner all rights, title, and interests in and to such Regulatory Submission and any Regulatory Approvals and Reimbursement Approvals.

3.2.2

Cooperation.  To the extent requested by Partner, uniQure shall cooperate with Partner, review any content that Partner asks uniQure to review, and prioritize actions to support Partner in the preparation, review, submission, and maintenance of the Initial U.S. MAA, the Initial E.U. MAA, all Regulatory Submissions related thereto, and seeking and maintaining Regulatory Approval and Reimbursement Approval.

(a)

Initial U.S. MAA.  Partner will (a) collaborate with uniQure on the preparation of the Manufacturing portion of the Initial U.S. MAA, and (b) submit the draft Initial U.S. MAA to the relevant subject matter experts at uniQure for their review and comment sufficiently in advance of any deadlines related to the filing of the Initial U.S. MAA with the FDA, provided that Partner may provide the draft Initial U.S. MAA to uniQure in sections.  The relevant subject matter experts at uniQure will provide comments on the sections of the draft Initial U.S. MAA to Partner in accordance with any deadlines reasonably set by Partner, but in any event uniQure will have not less than [*], to review each section of the draft Initial U.S. MAA, and Partner will reasonably consider and address in good faith uniQure’s comments thereon.  To the extent practicable, Partner will

(b)

Initial E.U. MAA.  Partner will submit the content in the draft Initial E.U. MAA that is substantively different from the content that uniQure had a right to review for the Initial U.S. MAA and any other content that Partner requests uniQure to review to the relevant subject matter experts at uniQure for their review and comment sufficiently in advance of any deadlines related to the filing of the Initial E.U. MAA with the EMA, provided that Partner may provide such content to uniQure in sections.  If the content that is substantively different from the Initial U.S. MAA includes Manufacturing content and uniQure is then Manufacturing the Licensed Products, then Partner will collaborate with uniQure on the preparation of the applicable Manufacturing content.  The relevant subject matter experts at uniQure will provide comments on such content to Partner in accordance with any deadlines reasonably set by Partner, but in any event uniQure will have not less than [*], to review each section of the Initial E.U. MAA that contains content that is substantively different from the content that uniQure had a right to review for in the Initial U.S. MAA, and Partner will reasonably consider and address in good faith uniQure’s comments thereon.  To the extent practicable, Partner will provide uniQure with reasonable advanced notice of its anticipated delivery to uniQure of any such content for uniQure’s review and comment.

3.2.3

Reimbursement of Costs and Expenses.  Partner will reimburse all reasonable out-of-pocket Third Party expenses and reasonable, documented internal costs (at the FTE Rate) incurred by uniQure after the Effective Date in connection with the activities described in Section 3.2.2 (Cooperation), including uniQure’s preparation of the Manufacturing portions to be included in the Initial U.S. MAA and Initial E.U. MAA (provided that Partner’s reimbursement of any such costs and expenses related to uniQure’s preparation of the Manufacturing portions to be included in the Initial U.S. MAA and Initial E.U. MAA will not exceed [*]) and such other activities performed at Partner’s request, but expressly excluding any costs and expenses incurred by uniQure for uniQure’s review of and comment on the Initial U.S. MAA or the content in the Initial E.U. MAA (other than with respect to the Manufacturing sections thereof).

3.3

Other Regulatory Submissions.

3.3.1

Preparation of Regulatory Submissions.  Subject to the terms of this Agreement, and except as expressly set forth in Section 3.2 (Preparation of the Initial U.S. MAA and the Initial E.U. MAA), the Regulatory Responsible Party will be responsible for the preparation and submission of all Regulatory Submissions for the Licensed Products in the Field in the Territory.  If uniQure is the Regulatory Responsible Party, then uniQure: (a) will be subject to Partner’s direction, oversight, review, and approval of all Regulatory Submissions and uniQure shall act in accordance with Partner’s reasonable direction; (b) will provide Partner with an opportunity to

3.3.2

Reimbursement of Costs and Expenses.  Partner will reimburse all reasonable out-of-pocket Third Party expenses and reasonable, documented internal costs (at the FTE Rate) incurred by uniQure after the Effective Date at Partner’s request in connection with the activities described in Section 3.3.1 (Preparation of Regulatory Submissions).

3.4

Correspondence and Meetings with Regulatory Authorities and Regulatory Approvals.

3.4.1

Correspondence with Regulatory Authorities.  Except as otherwise set forth in this Agreement, and without limiting Section 3.2 (Preparation of the Initial U.S. MAA and the Initial E.U. MAA) or Section 3.3 (Other Regulatory Submissions), promptly following the Regulatory Responsible Party’s receipt, forwarding, or production thereof, the Regulatory Responsible Party will provide the other Party with (a) access to or copies of all material written or electronic correspondence and communications (other than Regulatory Submissions) received by the Regulatory

3.4.2

Meetings with Regulatory Authorities. Except as otherwise set forth in this Agreement, the applicable Regulatory Responsible Party will be responsible for all meetings, conferences, and discussions with Regulatory Authorities or other applicable Governmental Authorities related to the receipt of Regulatory Approval and Reimbursement Approval to Commercialize the Licensed Products in the Field in the Territory.  If uniQure is the Regulatory Responsible Party, then uniQure will provide Partner with written notice of any scheduled material meeting, conference, or discussion with a Regulatory Authority or other Governmental Authority in the Territory relating to any Licensed Product in the Field as soon as practicable and, upon such other Party’s written request, will, to the extent practicable and permitted by the Governmental Authority in the Territory, allow such other Party to attend such meeting, conference, or discussion.  If Partner is the Regulatory Responsible Party, then Partner has sole discretion to allow uniQure to attend such meetings, conferences, or discussions, and will consider uniQure’s requests to attend in good

3.4.3

Ownership of Regulatory Approvals.  The Regulatory Responsible Party will file all ▇▇▇▇ and applications for Reimbursement Approval for the Licensed Products in the Field in the Territory in its name, provided that if Partner is the Regulatory Responsible Party, Partner may file all such ▇▇▇▇ and applications in the name of Partner’s Affiliates or Third Party Distributors, and, subject to the assignments set forth in Section 3.5 (Transfer of Regulatory Materials) and the rights granted to Partner under Section 2.1 (License Grants to Partner), will own all rights, title, and interests in and to all resulting Regulatory Approvals and Reimbursement Approvals for the Licensed Products in the Field in the Territory and all related Regulatory Submissions. The Regulatory Responsible Party will promptly inform the other Party (and in any event no later than [*] after receipt) of (a) the filing of any MAA for any Licensed Product in the Field in the Territory, and (b) the receipt of any Regulatory Approval or Reimbursement Approval for any Licensed Product in the Field in the Territory.

3.5

Transfer of Regulatory Materials.

3.5.1

Regulatory Transfer.  No later than [*] following the database lock for clinical data under the Current Phase III Protocol uniQure will, or will cause its designee to, transfer and assign to Partner all rights, title, and interests in and to all Regulatory Approvals, Reimbursement Approvals, and all other Regulatory Submissions required under Applicable Law in the Territory to be held by Partner related to Commercialization or Development of the Licensed Product in the Field in the Territory in the possession and Control of uniQure, its Affiliates, or designees (the “Assigned Regulatory Materials”), including copies of all such Assigned Regulatory Materials in electronic format, or such other format maintained by uniQure or its designee or otherwise agreed by the Parties. uniQure shall promptly, but no later than [*] after the Effective Date, provide Complete Regulatory Files for all interactions with any Regulatory Authorities or Governmental Authorities in the Territory, and a catalogue of the Complete Regulatory Files, in a format that is suitable for Partner’s electronic storage system. “Complete Regulatory Files”

3.5.2

Cooperation.  Subject to the terms of this Agreement, upon Partner’s written request, uniQure will execute and deliver, or will cause to be executed and delivered, to Partner such endorsements, assignments, commitments, acknowledgements, and other documents as may be necessary (a) to assign, convey, transfer, and deliver to Partner all of uniQure’s or its applicable Affiliate’s or designee’s rights, title, and interests in and to the applicable Assigned Regulatory Materials, (b) to otherwise assume the responsibilities as the Regulatory Responsible Party under this Agreement, or (c) as a result of the transfer to Partner of the Assigned Regulatory Materials, including submitting to each applicable Regulatory Authority or other Governmental Authority in the Territory a letter or other necessary documentation (with copy to Partner) notifying such Regulatory Authority or other Governmental Authority of, or otherwise giving effect to, the transfer of ownership to Partner of the Assigned Regulatory Materials, Reimbursement Approvals, and other Regulatory Submissions for any Licensed Product in the Field in the Territory as provided in Section 3.5.1 (Regulatory Transfer).

3.5.3

Costs. Partner will bear all reasonable out-of-pocket Third Party expenses in connection with (a) the transfer and assignment of all Assigned Regulatory Materials, and any other copies of any Regulatory Approvals, Reimbursement Approvals, or other Regulatory Submissions for any Licensed Product in the Field in the Territory provided to Partner pursuant to this Section 3.5 (Transfer of Regulatory Materials), and (b) the performance of any other activities required for Partner to assume the role of Regulatory Responsible Party with respect to any Licensed Product in the Field in the Territory or as may be required as a result of the transfer to Partner of the Assigned Regulatory Materials, provided that Partner’s reimbursement of any such expenses will not exceed [*]. Accordingly, uniQure will invoice Partner for such costs and expenses incurred by or on behalf of uniQure in connection with the performance of such transfer and activities related thereto, and

3.6

Regulatory Data Requests.  Subject to the terms of this Agreement, uniQure may request from Partner data on [*], in each case, that is included in Regulatory Submissions pertaining to any Licensed Product in the Field in the Territory submitted by or on behalf of Partner or its Affiliates, for use in the Regulatory Submissions for any product Controlled by uniQure or its Affiliates that contains the same capsid, promoter, or other component that is contained in the Licensed Product, but excluding, for the avoidance of doubt, any Competitive Product.  Partner will consider each request to provide or use such data, as applicable, on a case-by-case basis and will not unreasonably withhold or delay its provision of such data to, or the use of such data by, uniQure.

3.7

Security.  The Parties will send and transfer all regulatory materials discussed in Article 3 (Regulatory), including draft Regulatory Submissions, correspondence with Regulatory Authorities or Governmental Authorities, and copies of meeting minutes, in each case, using a Valid Encryption Process for data at rest or data in motion, as applicable.  “Valid Encryption Processes” are those that comply with National Institute of Standards and Technology (NIST) Special Publications, including 800-111, Guide to Storage Encryption Technologies for End User Devices; 800-52, Guidelines for the Selection and Use of Transport Layer Security (TLS) Implementations; 800-77, Guide to IPsec VPNs; or 800-113, Guide to SSL VPNs, or are Federal Information Processing Standards (FIPS) 140-2 validated, or provide a stronger level of data security than contemplated by such Special Publications or Standards or as may be otherwise agreed by the Parties in writing. Promptly following the Effective Date, the Parties will discuss and agree upon a Valid Encryption Process for such transfer in compliance with the requirements of this Section 3.7 (Security).

3.8

Adverse Events Reporting.

3.8.1

Adverse Event Reporting. Within a reasonable period of time prior to the First Commercial Sale of the first Licensed Product in the Field in the Territory, the Parties will notify each other in writing of the names and contact information of their respective employees or agents who are responsible for adverse experience reporting.

3.8.2

Safety Data Exchange (SDE) Agreements.  No later than [*] after the Effective Date, the Parties will enter into one or more written agreements setting forth safety and pharmacovigilance procedures for the Parties with respect to the Licensed Products in the Field in the Territory (a “SDE Agreement”). Partner will not market, promote, sell, or otherwise Commercialize any Licensed Product unless and until the Parties enter into one or more SDE Agreements for the Licensed Product. Each SDE Agreement will describe the obligations of both Parties with respect to the collection, investigation, reporting, and exchange of information between the Parties concerning any adverse event experienced by a subject or patient, and the seriousness thereof, whether or not determined to be attributable to a Licensed Product, including any such information received by either Party from a Third Party (subject to receipt of any required consents from such Third Party)

3.9

Notice of Regulatory Actions.  In addition, each Party will promptly notify the other Party of any information that such Party receives regarding any threatened or pending action, inspection, or communication by or from a Regulatory Authority that would reasonably be expected to materially affect the Exploitation of any Licensed Product in the Field in the Territory.

4.1

Development.

4.1.1

General. Without limiting Partner’s responsibility for the Partner Regulatory Activities, which will be conducted by or on behalf of Partner for the Licensed Products in accordance with Section 3.1 (Regulatory Responsibilities) and, except for any uniQure Development Activities, Partner, at its sole cost and expense and subject to the terms of this Agreement, will be solely responsible for all Development activities for the Licensed Products in the Territory.

4.1.2

Development Diligence. Subject to the terms of this Agreement, uniQure will use Commercially Reasonable Efforts to (a) conduct the Development of any Licensed Product in accordance with the Current Phase III Protocol (as such protocol may be updated from time to time pursuant to Section 4.4.1 (Current Phase III Protocol and Budget) and (b) perform any other uniQure Development Activities, including pursuant to the uniQure Development Budget or any uniQure Additional Development Plan (as such plan may be updated from time to time pursuant to Section 4.4.3 (uniQure Additional Development Plan and Budget).  Partner will use Commercially Reasonable Efforts to (i) obtain and maintain, and (ii) perform all Development activities required or recommended to support, obtain, and maintain, in each case ((i) and (ii)), all Regulatory Approvals and Reimbursement Approvals for each Licensed Product in the Field in each Major Country necessary to Commercialize the Licensed Product in such Major Country, including any Development activities required or recommended as a result of a change to one or more Manufacturing processes for a Licensed Product.

4.1.3

uniQure Additional Development Activities. If Partner desires that uniQure perform any Development activities for any Licensed Product (other than those set forth in the Current Phase III Protocol, the Manufacturing Development Plan, or relating to CMC development activities related to GMP production of a Licensed Product), then Partner will present to the JSC a proposal that outlines such activities

4.2

Partner Development Plan. No later than [*] after the Effective Date, Partner will develop an initial draft of the written plan for Development of the Licensed Products in the Field in the Territory (each, as updated from time to time in accordance with this Section 4.2 (Partner Development Plan) and Section 7.2 (Joint Steering Committee), the “Partner Development Plan”) and provide such initial draft to the JSC to review and discuss. The Partner Development Plan must include in reasonable detail: [*]. Partner will prepare an update to each Partner Development Plan at least annually for each Financial Year and will submit each such updated Partner Development Plan to the JSC to review and discuss.

4.3

Development Reporting.  At least [*] in advance of each JSC meeting, Partner will provide the JSC with a written report, in reasonable detail, regarding Partner’s Development activities by Financial Quarter with respect to the Licensed Products, which report will identify all Third Parties performing material Development activities, the key Development activities to be undertaken in the upcoming Financial Year throughout the Territory, and planned dates of submission of any MAA for a Licensed Product and receipt of Regulatory Approval for a Licensed Product. uniQure will: (a) [*],provide Partner with a written report, in reasonable detail, regarding uniQure Development Activities conducted under the Current Phase III Protocol, which report will describe such uniQure Development Activities conducted by uniQure in the prior [*] and to be undertaken in the upcoming [*]; (b) participate in status calls with Partner, such calls to be scheduled at a mutually agreeable time between the Parties from time to time (but not more frequently than once per [*]); (c) notify Partner of the occurrence of (together with reasonable details of) any event that has, or may reasonably be likely to have, any serious adverse effect relating to Development of the Licensed Products within [*] of uniQure becoming aware of such event; and (d) upon receipt of any written request from Partner (which requests may not be made more frequently than [*]), uniQure will provide Partner with a written response to any reasonable information request with respect to uniQure’s Development Activities.

4.4

uniQure Development Plans and Budgets.

4.4.1

uniQure Development Budget.  Schedule 4.4.1 (uniQure Development Budget) sets forth the complete budget for all uniQure Development Activities for the Licensed Product to be conducted by uniQure following the Effective Date, including for the conduct of the Current Phase III Protocol (and associated Current Phase III Budget) and any uniQure Additional Development Activities (and associated budget therefor) contemplated as of the Execution Date (the “uniQure Development Budget”). uniQure will update the uniQure Development Budget to reflect (a) any updates to the Current Phase III Budget pursuant to Section 4.4.2 (Current Phase III Protocol and Budget) and (b) any uniQure Additional Development Budget (or any update thereto) approved by the JSC pursuant to Section 4.1.3 (uniQure Additional Development Activities) or Section 4.4.3 (uniQure Additional Development Plan and Budget), as applicable.

4.4.2

Current Phase III Protocol and Budget.  The Current Phase III Budget is included in Schedule 4.4.1 (uniQure Development Budget).  As may be necessary during the Term, either Party may propose additional Development activities to be included under the Current Phase III Protocol.  Upon such a proposal, uniQure will prepare an update to the Current Phase III Protocol (together with a corresponding update to the Current Phase III Budget that contemplates the costs and expenses that uniQure would reasonably be required to incur in connection with the performance of Development activities under such proposed update) and will submit any such update to the JSC to review, discuss, and determine whether to approve in accordance with Article 7 (Governance).

4.4.3

uniQure Additional Development Plan and Budget.  As may be necessary during the Term, either Party may propose additional Development activities to be performed by uniQure.  Upon such a proposal, uniQure will prepare a uniQure Additional Development Plan (together with a corresponding update to the uniQure Additional Development Budget that contemplates the costs and expenses that uniQure would reasonably be required to be incurred in connection with the performance of Development activities under such proposed update) and will submit any such updated plan and budget to the JSC to review, discuss, and determine whether to approve in accordance with Article 7 (Governance).

4.4.4

Allocation of Costs.  Partner will be responsible for all actual internal costs (at the FTE Rate) and documented out-of-pocket Third Party expenses incurred by or on behalf of uniQure from and after the Effective Date in the performance of any uniQure Development Activities to the extent within the uniQure Development Budget, plus Allowable Overruns. Accordingly, after the end of each Financial Quarter during the Term, uniQure will provide to Partner an invoice of the actual internal costs (at the FTE Rate) and documented out-of-pocket Third Party expenses incurred by or on behalf of uniQure in the performance of any uniQure Development Activities during the prior Financial Quarter for which Partner is obligated to reimburse uniQure pursuant to this Section 4.4.4 (Allocation of Costs)

5.1

Supply Agreement.  Concurrently with the execution of this Agreement, effective as of the Effective Date, the Parties are entering into a supply agreement that sets forth the terms pursuant to which uniQure will supply the Licensed Products to Partner and its Affiliates for Development and Commercialization purposes (the “Supply Agreement”).

5.2

Manufacturing Development Plan.  Attached hereto as Schedule 5.2 (Manufacturing Development Plan) is a plan for the activities required to obtain the [*] (the “Manufacturing Development Plan”).  Either Party may propose updates to the Manufacturing Development Plan to the JSC to review, discuss, and determine whether to approve in accordance with Article 7 (Governance).  Once approved by the JSC, each update to the Manufacturing Development Plan will become effective and supersede the previous Manufacturing Development Plan as of the date of such approval or at such other time as decided by the JSC.  Notwithstanding any provision to the contrary set forth in this Agreement or in the Supply Agreement, prior to the Manufacturing Responsibility Cutover Date, uniQure will have the right, without seeking JSC approval, to make day-to-day ordinary course operational decisions with respect to the implementation of the Manufacturing Development Plan that do not require an update to the Manufacturing Development Plan in furtherance of the objectives set forth therein.  Except (a) as set forth in Section 3.2.3 (Reimbursement of Costs and Expenses) with respect to uniQure’s preparation of the Manufacturing portions to be included in the Initial U.S. MAA and Initial E.U. MAA (which activities are further described in “Stage 6” of the Manufacturing Development Plan) and (b) as set forth in Section 7.5.2(b)(ii) (Partner Decisions), Partner will not be responsible or liable for any costs or expenses (internal or Third Party) incurred by uniQure in connection with the performance of activities under the Manufacturing Development Plan.  In accordance with the provisions of Section 3.2.3 (Reimbursement of Costs and Expenses) and Section 7.5.2(b)(ii) (Partner Decisions), uniQure may invoice Partner for a Manufacturing Development Plan Required Change Amount, and Partner will pay the undisputed invoiced amounts within [*] after the date of the invoice.

5.3

Manufacturing Responsibility.

5.3.1

uniQure Responsibility.  Subject to Section 5.3.2 (Transfer of Manufacturing Responsibility), during the Term uniQure will use Commercially Reasonable Efforts to supply to Partner and its Affiliates the Licensed Products for Development or Commercialization in accordance with this Agreement and the Supply Agreement and to perform the activities allocated to uniQure under the Manufacturing Development Plan. During the Term, uniQure will not engage any CMO to Manufacture Licensed Products without Partner’s prior written consent, not to be unreasonably withheld. If the [*] is achieved at uniQure’s Lexington, MA site, then until the Manufacturing Responsibility Cutover Date, uniQure will be responsible for performing all post-marketing commitments and addressing all

5.3.2

Transfer of Manufacturing Responsibility.  Subject to the last sentence in Section 5.4 (Transfer of Manufacturing Know-How), Partner will have the right to assume responsibility for Manufacturing the Licensed Products for use in the Field in the Territory pursuant to the Manufacturing Responsibility Transfer Plan, which right it may exercise at any time during the Term by providing written notice to uniQure (the date of such notice, the “Manufacturing Responsibility Transfer Notice Date”). In such notice, Partner will (a) elect to Manufacture all or part of Partner’s requirements for the Licensed Products (i) through the CMO(s) then engaged by uniQure, in which case uniQure will transfer or assign to Partner all applicable agreements between uniQure and such CMO (if and to the extent that such agreement is transferrable or assignable and relates solely to the Licensed Products) or Partner may enter into its own direct agreement with such CMO, (ii) itself, in which case uniQure will transfer the uniQure Manufacturing Know-How to Partner in accordance with Section 5.4 (Transfer of Manufacturing Know-How), or (iii) through a CMO designated by Partner (subject to approval of such CMO by uniQure if required by and in accordance with Section 2.2.2 (Right to Subcontract)), in which case uniQure will transfer the uniQure Manufacturing Know-How to such CMO in accordance with Section 5.4 (Transfer of Manufacturing Know-How), and (b) give uniQure the notice required by Section 14.2 of the Supply Agreement relating to either the termination of the Supply Agreement or the request to have uniQure serve as a second source of Manufacture of the Licensed Products in accordance therewith.

5.3.3

Manufacturing Responsibility Transfer Plan.  Following the Manufacturing Responsibility Transfer Notice Date, upon Partner’s request, the Parties will collaborate reasonably with each other through the JSC to prepare, as soon as reasonably practicable, a written plan for the transfer of uniQure Manufacturing Know-How to Partner or its designated CMO that is not already Manufacturing the Licensed Product, in accordance with the timeline to be set forth therein (the date set forth in such plan for completion of such transfer and assumption of Manufacturing responsibility, the “Manufacturing Responsibility Cutover Date”), which plan the JSC may agree to update in accordance with Article 7 (Governance) from time to time (as updated from time to time, the “Manufacturing Responsibility Transfer Plan”).

5.4

Transfer of Manufacturing Know-How.  To facilitate Partner’s assumption of Manufacturing responsibility in accordance with Section 5.3.2 (Transfer of Manufacturing Responsibility), uniQure will (a) transfer true and complete copies of the uniQure Manufacturing Know-How to Partner or its designated CMO(s) in accordance with the Manufacturing Responsibility Transfer Plan, (b) upon Partner’s reasonable request, make available to Partner or its designated CMO(s) a reasonable number of uniQure’s technical personnel with appropriate skill and experience at times to be agreed by the Parties, and (c) use Commercially Reasonable Efforts to carry out its obligations under the Manufacturing Responsibility Transfer Plan. Partner will be responsible for all actual

6.1

Medical Affairs Responsibilities.  Partner, at its sole cost and expense, will be solely responsible for all Medical Affairs activities for the Licensed Products in the Field in the Territory.

6.2

Commercialization Responsibilities.  Partner, at its sole cost and expense, will be solely responsible for all Commercialization activities for the Licensed Products in the Field in the Territory.  Partner will conduct all Commercialization of each Licensed Product in the Field in the Territory in accordance with the Commercialization Plan for such Licensed Product and subject to the terms of this Agreement and any other written agreement between the Parties with respect to the subject matter set forth herein.

6.3

Commercialization Diligence.  Following receipt of Regulatory Approval of a Licensed Product in a Major Country, Partner will use Commercially Reasonable Efforts to obtain Reimbursement Approval for such Licensed Product in such Major Country (to the extent it is legally required in such Major Country), and following receipt of Regulatory Approval and (if so required) Reimbursement Approval for a Licensed Product in a Major Country, Partner will use Commercially Reasonable Efforts to Commercialize such Licensed Product in the Field in such Major Country.

6.4

Partner Commercialization Plan.  No later than [*] after the Effective Date, Partner will develop an initial draft of the written plan for Commercialization of the Licensed Products in the Field in the Territory (as updated from time to time in accordance with this Section 6.4 (Partner Commercialization Plan) and Section 7.2 (Joint Steering Committee), the “Partner Commercialization Plan”) and provide such initial draft to the JSC to review and discuss. The Partner Commercialization Plan must include in reasonable detail: [*]. Partner will prepare an update to each Partner Commercialization Plan at least annually per Financial Year and will submit each such updated Partner Commercialization Plan to the JSC to review and discuss.

6.5

Partner Commercialization Reporting.  At least [*] in advance of each JSC meeting, Partner will provide the JSC with a written report detailing Partner’s Commercialization activities by Financial Quarter with respect to the Licensed Products, which report will identify all Third Parties performing material Commercialization activities, the key Commercialization activities to be undertaken in the upcoming [*] throughout the Territory, and forecasted Net Sales throughout the Territory for the upcoming [*].

6.6

Advertising and Promotional Materials. Partner will be responsible for developing and maintaining all Promotional Materials, which will be consistent and compliant with Applicable Laws, the terms of all applicable Regulatory Approvals, the applicable guidelines from Regulatory Authorities, and Partner’s internal medical compliance policy.

6.7

Product Trademarks.  Partner will own all Product Marks used in connection with the Commercialization of any Licensed Product in the Territory, and have sole responsibility, at its own expense, for all matters relating to the selection and use of such Product Marks, including the selection, filing, prosecution, maintenance, defense, and enforcement thereof. To the extent permitted by Applicable Law and consistent with local industry standard, Partner will use reasonable efforts to include the words “Developed by uniQure” in relevant scientific, medical, and other Licensed Product-related communications, or such other similar or otherwise customary text provided by Partner and reasonably acceptable to uniQure.

7.1

Alliance Managers.  Each Party will appoint an individual to act as its alliance manager under this Agreement as soon as practicable after the Effective Date (each an “Alliance Manager”).  The Alliance Managers will: (a) serve as the primary points of contact between the Parties for the purpose of providing the other Party with information on the

7.2

Joint Steering Committee.

7.2.1

Formation and Purpose of JSC.  No later than [*] after the Effective Date, the Parties will establish a joint steering committee (the “JSC”) to monitor and coordinate the Development and Manufacture of the Licensed Products in the Field in the Territory and to provide a forum for the Parties to discuss and share information regarding the performance of Medical Affairs and Commercialization of the Licensed Products in the Field in the Territory.  The JSC will be composed of an equal number of representatives from each Party and a minimum of three representatives of each Party and who have the appropriate and direct knowledge and expertise and requisite decision-making authority.  Each Party may replace any of its representatives on the JSC and appoint a person to fill the vacancy arising from each such replacement.  A Party that replaces a representative will notify the other Party at least [*] prior to the next scheduled meeting of the JSC.  Both Parties will use reasonable efforts to keep an appropriate level of continuity in representation.  Representatives may be represented at any meeting by another appropriately knowledgeable person designated by the absent representative.  uniQure will designate one of its JSC representatives as one of the co-chairpersons of the JSC and Partner will designate one of its representatives as the other co-chairperson of the JSC.  Each Party’s representatives on the JSC will inform and coordinate within their respective organization to enable each Party to fulfill its obligations as agreed upon between the Parties under this Agreement, including within the timeframes set forth hereunder.

7.2.2

JSC Roles and Responsibilities.  The responsibilities of the JSC will be to:

(a)

provide a forum for the discussion of the Parties’ activities under this Agreement;

(b)

review and discuss the Development, Manufacturing, and CMC activities, performance of Medical Affairs, and Commercialization of Licensed Products in the Field in the Territory;

(c)

ensure the Assigned Regulatory Materials and each Party’s roles and responsibilities therefor, as described in Section 3.5.1 (Regulatory Transfer), are reflected in operation between uniQure and Partner;

(d)

receive the Partner Development Plan and any updates thereto, as described

(e)

receive the Development reports, sublicense compliance reports and invention disclosure reports provided by each Party, as described in Section 2.2.5 (Reports of Sublicensees and Subcontractors), Section 4.3 (Development Reporting) and Section 12.1.2 (Disclosure);

(f)

review, discuss, and determine whether to approve the plan for the performance of any uniQure Additional Development Activities and, if so approved, the uniQure Additional Development Plan and uniQure Additional Development Budget, as described in Section 4.1.3 (uniQure Additional Development Activities);

(g)

review, discuss, and determine whether to approve any update to the Current Phase III Budget, as described in Section 4.4.1 (Current Phase III Protocol);

(h)

review, discuss, and determine whether to approve any update to the uniQure Additional Development Plan or uniQure Additional Development Budget, in each case, as described in Section 4.4.3 (uniQure Additional Development Plan and Budget);

(i)

oversee the implementation of, and the coordination between the Parties of activities to be performed under, the Supply Agreement, the SDE Agreements, and any other written agreement between the Parties with respect to the Licensed Products in the Field in the Territory;

(j)

review, discuss, and determine whether to approve all material updates to the Manufacturing Development Plan, as described in Section 5.2 (Manufacturing Development Plan);

(k)

review, discuss, and determine whether to approve all updates to the Manufacturing Responsibility Transfer Plan, as described in Section 5.3.3 (Manufacturing Responsibility Transfer Plan);

(l)

review and discuss the Partner Commercialization Plan and any updates thereto, as described in Section 6.4 (Partner Commercialization Plans);

(m)

review and discuss the Commercialization reports provided by Partner, as described in Section 6.5 (Partner Commercialization Reporting);

(n)

review, discuss, and resolve any disputed change to the Product Specifications requested in accordance with Section 4.1.1 of the Supply Agreement and that has been referred to the JSC in accordance with Section 4.1.3 of the Supply Agreement;

(o)

review, discuss, and resolve any disputed change to the Manufacturing Process requested in accordance with Section 4.1.2 of the Supply Agreement and that has been referred to the JSC in accordance with Section

(p)

oversee the activities of the Parties’ Project Managers and the Project Team in carrying out the Manufacturing Development Plan, as described in Section 7.6 (Project Management);

(q)

establish and dissolve any subcommittee or working group to discuss specific matters under this Agreement; and

(r)

perform such other functions as expressly set forth in this Agreement or allocated to the JSC by the Parties’ written agreement.

7.2.3

Meeting Agendas.  Each Party will disclose to the other Party the proposed agenda items along with appropriate information at least [*] in advance of each meeting of the JSC; provided that under exigent circumstances requiring JSC input, a Party may provide its agenda items to the other Party within a shorter period of time in advance of a meeting, or may propose that there not be a specific agenda for a particular meeting, so long as such other Party consents to such later addition of such agenda items or the absence of a specific agenda for such JSC meeting.

7.2.4

Meetings.  The JSC will hold meetings at such times as it elects to do so but will meet no less frequently than once per Financial Quarter unless otherwise agreed by the Parties.  All meetings will be conducted in English unless otherwise agreed by the Parties.  The JSC may meet in person or by means of teleconference, Internet conference, videoconference, or other similar communication method; provided that at least one meeting each Financial Year will be conducted in person at a location selected alternatively by uniQure and Partner or such other location as the Parties may agree.  Each Party will be responsible for all of its own costs and expenses of participating in any JSC meeting.  The Alliance Managers will jointly prepare and circulate minutes for each JSC meeting within [*] after each such meeting and will ensure that such minutes are reviewed and approved by their respective companies within [*] thereafter.

7.3

Non-Member Attendance.  Each Party may from time to time invite a reasonable number of participants, in addition to its representatives (which may include legal counsel), to attend a meeting of the JSC (in a non-voting capacity), if such participants have expertise that is relevant to the planned agenda for such JSC meeting; provided that if either Party intends to have any Third Party (including any consultant) attend such a meeting, then such Party will provide prior written notice to the other Party reasonably in advance of such meeting and will ensure that such Third Party is bound by obligations of confidentiality and non-use at least as stringent as those set forth in Article 9 (Confidentiality; Publication).  Notwithstanding any provision to the contrary set forth in this Agreement, if the other Party objects in good faith in writing to the participation of such Third Party in such meeting due to a bona fide concern regarding competitively sensitive information that is reasonably likely to be discussed at such meeting (i.e., a consultant that also provides services to a Third Party with a Competitive Product), then such Third Party will not be permitted to

7.4

Decision-Making.

7.4.1

General Process.  The JSC, the Project Team, and any Committee established pursuant to this Agreement will only have the powers expressly assigned to it in this Article 7 (Governance) and elsewhere in this Agreement and will not have the authority to: (a) modify or amend the terms of this Agreement; or (b) waive either Party’s compliance with the terms of this Agreement.  All decisions of the JSC will be made by unanimous vote, with each Party’s representatives having collectively one vote (i.e., one vote per Party).  No action taken at any meeting of the JSC will be effective unless there is a quorum present at all times at such meeting, and at all such meetings, a quorum will be reached if two voting representatives of each Party are present or participating in such meeting.  Except as otherwise expressly set forth in this Agreement, the phrase “determine,” “designate,” “confirm,” “agree,” “approve,” or “determine whether to approve” by the JSC and similar phrases used in this Agreement will mean approval in accordance with this Section 7.4 (Decision-Making), including the escalation and tie-breaking provisions herein.  For the avoidance of doubt, matters that are specified in Section 7.2.2 (JSC Roles and Responsibilities) to be reviewed and discussed (as opposed to reviewed, discussed, and determined) do not require any agreement or decision by either Party and are not subject to the voting and decision-making procedures set forth in this Section 7.4 (Decision-Making) or in Section 7.5 (Resolution of JSC Disputes).

7.4.2

Decisions of the JSC.  The JSC will use good faith efforts, in compliance with this Section 7.4.2 (Decisions of the JSC), to promptly resolve any such matter for which it has authority.  If, after the use of good faith efforts, the JSC is unable to resolve any matter that is within the scope of the JSC’s authority or any other disagreement between the Parties that may be referred to the JSC, in each case, within a period of [*] after the applicable meeting of the JSC at which the JSC is unable to reach a resolution, then a Party may refer such matter to the Party’s respective Executive Officer for resolution in accordance with Section 7.5.1 (Referral to Executive Officers).

7.5

Resolution of JSC Disputes.

7.5.1

Referral to Executive Officers.  If a Party makes an election under Section 7.4.2 (Decisions of the JSC) to refer a matter on which the JSC cannot reach a consensus decision for resolution by the Executive Officers, which election must be made no later than [*] after the applicable meeting of the JSC at which the JSC is unable to reach a consensus decision, then the Parties will each submit in writing the respective positions of the Parties to the Executive Officers.  The Executive Officers will use good faith efforts to resolve any such matter so referred to them as soon as practicable, and any final decision that the Executive Officers agree to in writing will be conclusive and binding on the Parties.

7.5.2

Final Decision-Making Authority.  If the Executive Officers are unable to reach agreement on any such matter referred to them within [*] after such matter is so referred (or such longer period as the Executive Officers may agree upon), then:

(a)

No Change; Status Quo.  Neither Party will have final decision-making authority over (i) any matter reasonably likely to give rise to any safety concerns with respect to the Licensed Product, (ii) the conduct of any uniQure Additional Development Activities, (iii) any update with respect to uniQure’s activities under the Current Phase III Protocol or Current Phase III Budget, or (iv) the initial uniQure Additional Development Plan or the uniQure Additional Development Budget or any update thereto; provided that with respect to each of clauses (ii), (iii), and (iv) above, if a Regulatory Authority requires or requests a change to uniQure Development Activities (including under the Current Phase III Protocol), then Partner will have final decision-making authority in respect of, and will have the right to require such change, if Partner agrees to a corresponding increase to the uniQure Development Budget if such change is made.

(b)

Partner Decisions.  Except for those matters listed in Section 7.5.2(a) (No Change; Status Quo), Partner will have final decision-making authority with respect to (i) all matters related to the Exploitation of the Licensed Products in the Field in the Territory, provided that, with respect to any proposed change to Partner’s activities under the Current Phase III Protocol, Partner will consider in good faith all reasonable comments of uniQure with respect thereto prior to any exercise of Partner’s final decision-making authority over such change, (ii) any changes to the Manufacturing Development Plan (or any further change thereto), provided that, if any such change is requested or required by Partner (other than a change that is necessitated by a requirement of a Regulatory Authority [*]) and such change would increase uniQure’s expenditures in connection with the performance of the Manufacturing Development Plan or the Manufacturing of the Licensed Products, then Partner may not require such change unless Partner agrees to bear and be liable for the amount of such increase (a “Manufacturing Development Plan Required Change Amount”), (iii) the Manufacturing Responsibility Transfer Plan (or any update thereto), subject to Partner’s obligations under Section 5.4 (Transfer of Manufacturing Know-How), and (iv) any changes to the Product Specifications (or any update thereto) or to the Manufacturing Process (or any update thereto), provided that Partner may not decline to implement any requested change (of either Party) to the Product Specifications or the Manufacturing Process that is required or reasonably anticipated to be required by a Regulatory Authority.

7.5.3

Limitations on Decision-Making.  Notwithstanding any provision to the contrary set forth in this Agreement, without the other Party’s prior written consent, no decision of the JSC or a Party’s Executive Officer (in the exercise of a Party’s final decision-making authority on any such matters), in each case, may (a) result in a material increase in the other Party’s obligations, costs, or expenses under this

7.6

Project Management.  Promptly after the Effective Date, each Party will designate such of their respective employees to form a subcommittee of the JSC to direct the activities to be carried out under the Manufacturing Development Plan (“Project Team”).  Each Party will also designate one of its employees to act as its project manager (each, a “Project Manager”), who will be primarily responsible for day-to-day interactions with the other Party concerning activities performed under the Manufacturing Development Plan and for communicating all instructions and information concerning such activities performed under the Manufacturing Development Plan to the members of the Project Team.  The Project Team and Project Managers will consult periodically during the performance of the activities under the Manufacturing Development Plan, through the provision of detailed reports, face-to-face meetings, telephone conferences, videoconferences, or on-site visits during production at times to be agreed upon by the Project Managers.  Each Party may appoint a substitute or replacement Project Manager or member(s) of the Project Team in the in the absence of its original Project Manager or original member(s) of the Project Team by notifying the Party in writing of such substitution or replacement.  The Project Managers and Project Team will report to and will be subject to the oversight of the JSC.  Any dispute arising within the Project Team or between the Parties’ respective Project Managers will be referred to the JSC for resolution in accordance with Section 7.4 (Decision-Making). For clarity, the actions of the Project Managers and Project Team will be subject to the final decision-making authority of the JSC as set forth in Section 7.5 (Resolution of JSC Disputes).

7.7

Committees.  If agreed by the Parties, the JSC may form other committees or working groups as may be necessary or desirable to facilitate the activities under this Agreement (each, a “Committee”).  A Party may refer any dispute on a matter within a Committee’s authority to the JSC for resolution. No such Committees’ authority may exceed that specified for the JSC in this Article 7 (Governance).

8.1

Upfront Payment.  No later than [*] after the Effective Date, Partner will pay to uniQure by wire transfer of immediately available funds an upfront payment of $450 million (the “Upfront Payment”).

8.2

Milestone Payments.

8.2.1

Regulatory Milestones.  No later than [*] after achievement of the regulatory milestone event set forth below for the Lead Product, Partner will pay to uniQure the corresponding regulatory milestone payment as set forth below (the regulatory milestone events set forth in Table 8.2.1, the “Regulatory Milestone Events,” and the regulatory milestone payments set forth in Table 8.2.1, the “Regulatory Milestone Payments”).

8.2.2

Sales Milestones.  No later than [*] after the end of the first Financial Quarter of a Financial Year in which the total Net Sales of the Licensed Products in the Territory for that Financial Year equals or exceeds one of the thresholds set forth in Table 8.2.2 below, Partner will pay to uniQure the corresponding sales milestone payment set forth in Table 8.2.2 below (the sales milestone events set forth in Table 8.2.2, the “Sales Milestone Events” and the sales milestone payments set forth in Table 8.2.2, the “Sales Milestone Payments”).  For the avoidance of doubt, each Sales Milestone Event may occur only once and the related Sales Milestone Payment may be paid only once.

8.2.3

Notification of Milestone Events.  The Party achieving any Regulatory Milestone Event or Sales Milestone Event (each, a “Milestone Event”) will promptly notify the other Party in writing of, but in no event later than (a) [*] after the achievement of such Regulatory Milestone Event or (b) [*] after the end of the relevant Financial Quarter in which such Sales Milestone Event was achieved.  However, in no event will a failure by either Party to deliver such notice of achievement of a Milestone Event relieve Partner of its obligation to pay uniQure the corresponding Regulatory

8.2.4

Payment Adjustment for [*].  If, at any time, based on communication received from an applicable Regulatory Authority in the United States or Europe, [*], then, upon written notice by Partner to uniQure of such determination setting forth in reasonable detail Partner’s rationale for such determination, the Parties in good faith will renegotiate (a) any Milestone Payments for Milestone Events not yet achieved and (b) the Royalty Rates as promptly as reasonably practicable thereafter in light of such additional required Development. If the Parties fail to agree upon the renegotiated Milestone Payments and Royalty Rates within [*] after delivery of such notice, such dispute will be resolved in accordance with the specified expedited arbitration procedures set forth in Section 14.7 (Specified Expedited Arbitrations) and, for the avoidance of doubt, the pre-arbitration negotiation procedure set forth in Section 14.1 (Pre-Arbitration Negotiation) will not apply.

8.2.5

Payment Condition and Adjustments for [*] Milestone.

(a)

If, (i) prior to completion by uniQure of all of its activities under the Manufacturing Development Plan, Partner has assumed Manufacturing responsibility (whether by itself or through any of its Affiliates or designated Subcontractors) for the Licensed Products for use in the Field in the Territory pursuant to Section 5.3.2 (Transfer of Manufacturing Responsibility), including responsibility for the [*], and (ii) as of the Manufacturing Responsibility Transfer Notice Date a CRE Default (as determined pursuant to Section 13.2.2(b) (CRE Defaults)) of uniQure’s obligation to perform the activities under the Manufacturing Development Plan in accordance with Section 5.3.1 (uniQure Responsibility) existed (whether determined prior to, on or after the Manufacturing Responsibility Transfer Notice Date), then the Regulatory Milestone Payment for the [*] shall not be payable.

(b)

If, (i) prior to completion by uniQure of all of its activities under the Manufacturing Development Plan, Partner has assumed Manufacturing responsibility (whether by itself or through any of its Affiliates or designated Subcontractors) for the Licensed Products for use in the Field in the Territory pursuant to Section 5.3.2 (Transfer of Manufacturing Responsibility), including responsibility for the [*], and (ii) as of the Manufacturing Responsibility Transfer Notice Date  a CRE Default (as determined pursuant to Section 13.2.2(b) (CRE Defaults)) of uniQure’s obligation to perform the activities under the Manufacturing Development Plan in accordance with Section 5.3.1 (uniQure Responsibility) did not exist (whether determined prior to, on or after the Manufacturing Responsibility Transfer Notice Date), then the Parties in good faith will negotiate an equitable reduction of the Regulatory Milestone Payment payable to uniQure upon achievement of the [*] based on each Party’s pro rata contributions to the achievement of such milestone event (e.g., if Partner or

(c)

If (i) uniQure performs and completes its activities under the Manufacturing Development Plan in accordance with Section 5.3.1 (uniQure Responsibility) and the [*] is achieved, but (ii) (A) such [*] has not been achieved in the United States prior to the [*], then the Regulatory Milestone Payment payable to uniQure upon achievement of the [*] will be reduced by an amount equal to the difference between (x) the aggregate amount actually paid or payable by Partner to uniQure [*] and (y) the aggregate amount that would have been paid or payable by Partner to uniQure [*], or (B) such [*] has not been achieved in the E.U. prior to the [*] of the receipt of Regulatory Approval of the Initial E.U. MAA, then the Regulatory Milestone Payment payable to uniQure upon achievement of the [*] will be reduced by an amount equal to the difference between (I) the aggregate amount actually paid or payable by Partner to uniQure [*] and (II) the aggregate amount that would have been paid or payable by Partner to uniQure [*].

8.3

Royalties.

8.3.1

Royalty Payments.  Partner will pay to uniQure, on a country-by-country basis, royalties during the Term at the applicable royalty rates set forth in Table 8.3.1 (the “Royalty Rates”), on an incremental basis, on the aggregate, worldwide Net Sales of any Licensed Product by Partner and its Affiliates and Sublicensees in the Territory in the applicable Financial Year (the “Royalties”) until the latest to occur of (a) [*] after First Commercial Sale of a Licensed Product in such country, (b) the expiration of the last Valid Claim in the uniQure Royalty Patent Rights that Cover such Licensed Product or the making, using, or selling thereof in such country and (c) [*] (the “Royalty Term”).  [*]

8.3.2

Royalty Reductions.

(a)

Patent Expiration Step-Down.  Subject to Section 8.3.2(d) (Royalty Reductions Floor), on a Licensed Product-by-Licensed Product and country-by-country basis, the royalty rates payable by Partner with respect to the Net Sales of a Licensed Product in a country in the Territory will be reduced by [*]% during each Financial Quarter following the expiration or invalidation of the last Valid Claim within the uniQure Royalty Patent Rights that Covers such Licensed Product or the making, using, or selling thereof in such country; provided that [*].

(b)

Loss of Market Exclusivity. If, on a Licensed Product-by-Licensed Product, Financial Quarter-by-Financial Quarter, and country-by-country basis, during the Royalty Term of a Licensed Product in a country, (i) there is a Loss of Market Exclusivity with respect to such Licensed Product or (ii) [*], then, subject to Section 8.3.2(d) (Royalty Reductions Floor), the royalty rates payable by Partner pursuant to Section 8.3.1 (Royalty Payments) with respect to the Net Sales of such Licensed Product in such country in such Financial Quarter will be reduced by [*]%.

(c)

Right to Offset. Subject to Section 8.3.2(d) (Royalty Reductions Floor), on a Licensed Product-by-Licensed Product and country-by-country basis, Partner may credit [*]% of any Third Party Royalty Payments with respect to a Licensed Product in a country in the Territory in a Financial Quarter against the Royalties due and payable by Partner to uniQure on the Net Sales for such Licensed Product in such country in such Financial Quarter.

(d)

Royalty Reductions Floor.  On a Licensed Product-by-Licensed Product, Financial Quarter-by-Financial Quarter, and country-by-country basis, in no event will the Royalties due to uniQure for a Licensed Product in a country in the Territory in any given Financial Quarter during the Royalty Term for such Licensed Product in such country be reduced by more than [*]% of the amount that otherwise would have been due and payable to uniQure in such Financial Quarter for such Licensed Product in such country but for the reductions set forth in this Section 8.3.2 (Royalty Reductions). Partner may carry forward any such reductions permitted under this Section 8.3.2 (Royalty Reductions) that are incurred or accrued in a Financial Quarter but are not applied against Royalties due to uniQure in such Financial Quarter as a result of the foregoing floor and apply such amounts against Royalties due to uniQure in any subsequent Financial Quarter (subject to the minimum floor set forth in this Section 8.3.2(d) (Royalty Reductions Floor)) until the amount of such reduction has been fully applied against Royalties due to uniQure.

8.3.3

Royalty Payments and Reports.

(a)

Flash Reports. Within [*] after the end of each Financial Quarter during the Term, Partner will provide to uniQure flash reports that will set forth (i) for the first and second month of such Financial Quarter: (A) the actual

(b)

Royalty Reports. In addition to the Flash Reports to be provided in accordance with Section 8.3.3(a) (Flash Reports), within [*] after the end of each Financial Quarter during the Term, Partner will provide to uniQure a written report (each, a “Royalty Report”) setting forth in reasonable detail (i) the gross sales of each Licensed Product sold by Partner or its Affiliate or Sublicensee in the Territory in such Financial Quarter; (ii) the aggregate Net Sales of each Licensed Product sold by Partner or its Affiliates or Sublicensees in the Territory in such Financial Quarter; (iii) all deductions and reductions used to determine the Net Sales of each Licensed Product for such Financial Quarter and the Royalties payable with respect to each Licensed Product for such Financial Quarter, including any reductions taken pursuant to Section 8.3.2 (Royalty Reduction); (iv) the exchange rates used to calculate the Royalties payable in U.S. Dollars; (v) any withholding taxes required to be made from such Royalties; and (vi) the quantity and description of each Licensed Product sold by Partner or its Affiliate or Sublicensee in the Territory during such Financial Quarter comprising such Net Sales, including detailed sales reports for each Licensed Product for each month of the Financial Quarter in each country in the Territory. The amounts, calculations, and information set forth in the foregoing clauses (i) through (vi) will be broken down on a monthly basis for each country in the Territory. The Parties will seek to resolve any questions or issues related to a Royalty Report within [*] following receipt by uniQure of each Royalty Report.

(c)

Royalty Payments. The information contained in each Flash Report and Royalty Report will be considered Confidential Information of Partner. Within [*] after the end of each Financial Quarter, Partner will make the Royalty payment due hereunder for the Financial Quarter covered by the applicable Royalty Report.

8.4

Development Payment.  Partner will partially fund uniQure’s Development expenses between the Execution Date and the earlier of the Effective Date or the date this Agreement is terminated pursuant to Section 15.5 (Outside Date) by paying uniQure a one-time, aggregate payment in an amount equal [*] (such amount, the “Development Payment”).  Partner will pay uniQure the Development Payment no later than [*] after the earlier of the Effective Date or the date this Agreement is terminated pursuant to Section 15.5 (Outside Date). The Development Payment will be irrevocable, non-refundable, and non-creditable against any other payment due to uniQure pursuant to this Agreement (subject only to the terms of Section 15.5 (Outside Date)).

8.5

Other Amounts Payable.  With respect to any amounts owed under this Agreement by one Party to the other for which no other invoicing and payment procedure is specified hereunder, within [*] after the end of each Financial Quarter, each Party will provide an invoice, together with reasonable supporting documentation, to the other Party for such amounts owed in respect of such Financial Quarter.  The owing Party will pay any undisputed amounts within [*] after the receipt of the invoice, and any disputed amounts owed by a Party will be paid within [*] after resolution of the dispute.

8.6

Offset for “Step-In” Exercise.  Partner may offset 100% of any amounts paid by Partner to any Third Party resulting from Partner’s cure of any uncured breach by uniQure under any Existing In-License pursuant to Section 2.5(f) (Existing In-Licenses) against any payment(s) then or thereafter due to uniQure under this Agreement.

8.7

No Refunds.  Except as expressly provided herein (including Section 8.12 (Financial Records and Audits) and Article 11 (Indemnification)), all payments under this Agreement will be irrevocable, non-refundable, and non-creditable (absent manifest calculation error or payment processing error).

8.8

Accounting Standards.  If a Party changes its general accounting principles from the then-current standard (e.g., from GAAP to IFRS) at any time during the Term, then at least [*] prior to adopting such change in principles, such Party will provide written notice to the other Party of such change.

8.9

Currency; Exchange Rate.  All amounts expressed in this Agreement are expressed in U.S. Dollars.  All payments to be made by Partner to uniQure under this Agreement will be made in U.S. Dollars by electronic funds transfer in immediately available funds to a bank account designated in writing by uniQure.  All payments to be made by uniQure to Partner under this Agreement will be made in U.S. Dollars by electronic funds transfer in immediately available funds to a bank account designated in writing by Partner. Conversion of Net Sales recorded in local currencies will be converted to U.S. Dollars at the exchange rate used by CSL Limited in accordance with its Accounting Standards on the last Business Day of the Financial Quarter in which the applicable payment obligation became due and payable.

8.10

Blocked Payments.  If by reason of Applicable Law in any country or region, it becomes impossible or illegal for a Party to transfer, or have transferred on its behalf, payments owed to the other Party hereunder, then such Party will promptly notify the other Party of the conditions preventing such transfer and such payments will be deposited in local currency in the relevant country or region to the credit of the other Party in a recognized banking institution designated by the other Party or, if none is designated by the other Party within a period of [*], in a recognized banking institution selected by the transferring Party, as the case may be, and identified in a written notice given to the other Party.

8.11

Late Payments.  Any payments or portions thereof due hereunder that are not paid on the date such payments are due under this Agreement will bear interest at a rate equal to the lesser of: (a) [*] percentage points above the Prime Rate as quoted in The Wall Street Journal on the first day of each Financial Quarter in which such payments are overdue; or

8.12

Financial Records and Audits.  Each Party will maintain complete and accurate records for at least [*] following the relevant Financial Quarter to which they pertain in sufficient detail to permit the other Party to confirm the accuracy of the amount of costs and expenses incurred in connection with the performance of the uniQure Development Activities, Royalties, and other amounts payable under this Agreement. Upon reasonable prior written notice, such records will be made available during regular business hours for examination by an independent certified public accountant of recognized international standing selected by the examining Party and reasonably acceptable to the other Party for the sole purpose of verifying for the examining Party the accuracy of the financial reports furnished by the other Party (the “Examined Party”) pursuant to this Agreement or of any payments made, or required to be made, by such Examined Party pursuant to this Agreement; provided that such independent accounting firm is subject to customary written obligations of confidentiality and non-use applicable to each Party’s Confidential Information.  Such audit will not be (a) performed more frequently than once per Financial Year during the Term or once during the [*] period after the expiration or termination of this Agreement, (b) conducted for any Financial Year more than [*] after the end of such year, or (c) repeated for any Financial Year or with respect to the same set of records (unless a material discrepancy with respect to such records is discovered during a subsequent audit).  Such accountant will not disclose the Examined Party’s Confidential Information to the examining Party or to any Third Party, except to the extent such disclosure is necessary to verify the accuracy of the financial reports furnished by the Examined Party or the amount of payment by the Examined Party under this Agreement. If such accountant concludes either that an additional amount is owed to a Party but unpaid, or that an amount paid by a Party was in excess of the amount owed, then, in either case, the Party that owes the other Party an amount (i.e., the amount owed but unpaid by such Party or the amount that such Party was overpaid) will pay such amount plus interest (as set forth in Section 8.11 (Late Payments)) from the original due date or the overpayment date, as applicable) to the other Party within [*] after the delivery by the accountant of the accountant’s written report to the Parties so concluding.  If each Party owes an amount(s) to the other Party, then the accountant will net such amounts (including the interest that would be payable thereon), such that only the Party that owes the larger aggregate amount to the other Party will be required to make a payment as a result of such audit.  The examining Party will bear the full cost of such audit unless such audit reveals that the Examined Party owes the examining Party an amount that is more than [*] percent ([*]%) of the amount actually due for the time period being audited, in which case the Examined Party will reimburse the examining Party for the reasonable audit fees for such examination.

8.13

Taxes.  If under any Applicable Law or regulation of any country of the Territory withholding of Taxes of any type, levies, or other charges is required with respect to any amounts payable hereunder to a Party, the other Party (“Withholding Party”) will apply the withholding or deduction as so required and will promptly pay such Tax, levy, or charge to the proper Governmental Authority, and will promptly furnish the Party with proof of such payment.  The Withholding Party will have the right to withhold or deduct any such Tax, levy, or charge actually paid from payment due to the Party or be promptly reimbursed

9.1

Duty of Confidence.  Subject to the other provisions of this Article 9 (Confidentiality; Publication):

9.1.1

except to the extent expressly authorized by this Agreement, all Confidential Information of a Party (the “Disclosing Party”) or its Affiliates will be maintained in confidence and otherwise safeguarded, and not published or otherwise disclosed, by the other Party (the “Receiving Party”) and its Affiliates for the Term and for [*] thereafter;

9.1.2

the Receiving Party will secure and protect all Confidential Information provided by the Disclosing Party with the same degree of care as the Receiving Party uses for its own similar information, but in no event less than a reasonable degree of care in light of the sensitivity of the Confidential Information in question;

9.1.3

the Receiving Party may only use any Confidential Information of the Disclosing Party for the purposes of performing its obligations or exercising its rights under this Agreement;

9.1.4

a Receiving Party may disclose Confidential Information of the Disclosing Party to: (a) such Receiving Party’s Affiliates, licensees, Sublicensees, and Subcontractors; and (b) employees, directors, officers, agents, contractors,

9.1.5

each Party will promptly notify the other Party if the first Party becomes actually aware of any misuse or unauthorized disclosure of the other Party’s Confidential Information and take all necessary actions to remediate and comply with all Applicable Laws regarding same.

9.2

Confidential Information.  The uniQure Know-How will be the Confidential Information of uniQure.  The Joint Know-How and the terms of this Agreement will be the Confidential Information of each Party.  The Partner Know-How will be the Confidential Information of Partner.  Except as otherwise expressly permitted by or authorized in accordance with this Agreement, neither Party nor its Affiliates may disclose the existence or the terms of this Agreement.

9.3

Exemptions.  Information of a Disclosing Party will not be Confidential Information of such Disclosing Party to the extent that the Receiving Party can demonstrate through reasonable evidence that such information:

9.3.1

is known by the Receiving Party or any of its Affiliates without an obligation of confidentiality to any Person at the time of its receipt from or on behalf of the Disclosing Party or its Affiliates, and not through a prior disclosure by or on behalf of the Disclosing Party or its Affiliates, as documented by the Receiving Party’s business records;

9.3.2

is generally available to the public before its receipt from or on behalf of the Disclosing Party;

9.3.3

becomes generally available to the public or otherwise part of the public domain after its disclosure by or on behalf of the Disclosing Party or its Affiliates and other

9.3.4

is subsequently disclosed to the Receiving Party or any of its Affiliates without obligation of confidentiality by a Third Party who may rightfully do so and, to the actual knowledge of the Receiving Party or such Affiliate, is not under any obligation of confidentiality to the Disclosing Party or its Affiliates; or

9.3.5

is developed by the Receiving Party or any of its Affiliates independently and without use of or reference to any Confidential Information received from or on behalf of the Disclosing Party or any of its Affiliates, as documented by the Receiving Party’s business records.

9.4

Authorized Disclosures.  Notwithstanding the obligations set forth in Section 9.1 (Duty of Confidence), a Party may disclose the other Party’s Confidential Information (including the existence and terms of this Agreement) in the following situations:

9.4.1

(a) the Patent Prosecution of uniQure Patent Rights, Joint Patent Rights, or Partner Patent Rights, in each case, as contemplated by this Agreement; or (b) Regulatory Submission and other filings with Governmental Authorities (including Regulatory Authorities), as necessary for the Exploitation of any Licensed Product in accordance with the rights and obligations of the applicable Party under this Agreement;

9.4.2

disclosure of this Agreement, its terms, and the status and results of Exploitation of any Licensed Product to actual or bona fide potential investors, acquirors, (sub)licensees, lenders, and other financial or commercial partners (including in connection with any royalty factoring transaction), and their respective attorneys, accountants, banks, investors, and advisors, solely for the purpose of evaluating or carrying out an actual or potential investment, acquisition, (sub)license, debt transaction, or collaboration; provided that, in each such case, subject to Applicable Laws and on the condition that such Persons are bound by obligations of confidentiality and non-use at least as stringent as those set forth in this Article 9 (Confidentiality; Publication) or otherwise customary for such type and scope of disclosure; provided that any such disclosure is limited to the maximum extent practicable for the particular context in which it is being disclosed;

9.4.3

such disclosure is required to comply with Applicable Law (whether generally or in pursuit of an application for listing of securities), including the United States Securities and Exchange Commission or equivalent foreign agency or regulatory body, or otherwise required by or requested pursuant to any judicial, administrative or other legal process, provided that in each such event, as promptly as reasonably practicable and to the extent not prohibited by Applicable Law, such Party will notify the other Party of such required or requested disclosure and provide a draft of the disclosure to the other Party reasonably in advance of such disclosure for the other Party’s review and comment.  The non-disclosing Party will provide any comments as soon as practicable, and the disclosing Party will consider in good

9.4.4

disclosure pursuant to Section 9.6 (Publications) or Section 9.7 (Publicity; Use of Name).

9.5

Tax Treatment.  Nothing in Section 9.1 (Duty of Confidence) or Section 9.4 (Authorized Disclosures) will limit either Party in any way from disclosing to any Third Party such Party’s U.S. or foreign income Tax treatment and the U.S. or foreign income Tax structure of the transactions relating to such Party that are based on or derived from this Agreement, or materials of any kind (including opinions or other Tax analyses) relating to such Tax treatment or Tax structure, except to the extent that nondisclosure of such matters is reasonably necessary in order to comply with applicable securities laws.

9.6

Publications.  Partner may publicly present or publish any Clinical Trial or Commercialization data, non-clinical or preclinical data, or any associated results, data, or conclusions generated by or on behalf of Partner pursuant to this Agreement (each such proposed presentation or publication, a “Publication”), provided that such Publication does not contain any Confidential Information of uniQure (without uniQure’s prior written consent).  Partner will consult reasonably with uniQure with respect to Partner’s publication and communication strategy with respect to the Licensed Products in the Field in the Territory.  If Partner desires to publicly present or publish a Publication relating in any way to the Manufacture of a Licensed Product or any uniQure Manufacturing Technology, and such Publication (a) is not a Promotional Material and (b) contains substantive information not previously publicly presented or published, then Partner will provide uniQure with a copy of such proposed Publication at least [*] prior to the earlier of its presentation or intended submission for publication (such applicable period, the “Review Period”), and Partner agrees that it will not submit or present any such Publication until (i) uniQure has provided written comments during such Review Period on the material in such Publication, or (ii) the applicable Review Period has elapsed without written comments from uniQure, in which case Partner may proceed and the Publication will be considered approved in its entirety.  Notwithstanding any provision to contrary set

9.7

Publicity; Use of Names.

9.7.1

Press Release.  The Parties have agreed on the content of separate press releases announcing this Agreement, each as set forth on Schedule 9.7.1 (Press Releases), to be issued by the applicable Party on such date and time as may be agreed by the Parties.  Other than the press releases set forth on Schedule 9.7.1 (Press Releases) and the disclosures permitted by this Section 9.7 (Publicity; Use of Names) and Section 9.4 (Authorized Disclosures), the Parties agree that the portions of any other press release or other public action or announcement relating to this Agreement or the performance hereunder that would disclose information, other than that which is not Confidential Information of a Party and so long as such information remains true, correct, and current, will first be reviewed and approved by both Parties (with such approval not to be unreasonably withheld).

9.7.2

Use of Names.  Each Party will have the right to use the other Party’s name and logo as otherwise set forth in this Agreement and in presentations, its website, collateral materials, and corporate overviews to describe the collaboration relationship, as well as in taglines of press releases issued pursuant to this Section 9.7 (Publicity; Use of Names); provided that each Party will use the other Party’s corporate name in such manner (a) that the distinctiveness, reputation, and validity of any trademarks and corporate or trade names of such other Party will not be impaired, (b) consistent with best practices used by such other Party for its other collaborators, and (c) in accordance with the other Party’s written approval (with such approval not to be unreasonably withheld), and provided further that each Party shall provide to the other Party reasonable prior written notice of its intention to use the other Party’s corporate name, but once a Party gives its initial approval to such use, its further approval is not required for any subsequent uses that do not materially differ from such approved use.  Except as permitted under this Section 9.7 (Publicity; Use of Names) or with the prior express written permission of the other Party, neither Party will use the name, trademark, trade name, or logo of the other Party or its Affiliates or their respective employees in any publicity, promotion, news release, or disclosure relating to this Agreement or its subject matter except as may be required by Applicable Law.  Each Party will

9.8

Attorney-Client Privilege.  Neither Party is waiving, nor will be deemed to have waived or diminished, any of its attorney work product protections, attorney-client privileges or similar protections and privileges or the like as a result of disclosing information pursuant to this Agreement, or any of its Confidential Information (including Confidential Information related to pending or threatened litigation) to the Receiving Party, regardless of whether the Disclosing Party has asserted, such privileges and protections. The Parties: (a) share a common legal and commercial interest in such disclosure that is subject to such privileges and protections; (b) are or may become joint defendants in proceedings to which the information covered by such protections and privileges relates; (c) intend that such privileges and protections remain intact should either Party become subject to any actual or threatened proceeding to which the Disclosing Party’s Confidential Information covered by such protections and privileges relates; and (d) intend that after the Effective Date both the Receiving Party and the Disclosing Party will have the right to assert such protections and privileges.  Notwithstanding any provision to the contrary set forth in this Agreement, nothing in this Section 9.8 (Attorney-Client Privilege) will apply with respect to a Dispute between the Parties (including their respective Affiliates).

9.9

Personal Information.  Each Party will comply with all Applicable Laws with respect to its collection, processing, use, disclosure, sharing, transfer, storage, and disposal of personal or personally identifiable information in connection with this Agreement.  The Parties will fully cooperate in such process and execute all additional agreements that are necessary or desirable to further same.

10.1

Representations and Warranties of Each Party.  Each Party represents and warrants to the other Party as of the Execution Date as follows:

10.1.1

It is a corporation or limited company duly organized, validly existing, and, as applicable, in good standing under the laws of the jurisdiction of its organization, and it has the full right, power and authority to enter into this Agreement and to perform its obligations hereunder.

10.1.2

It has not been Debarred/Excluded and no proceeding that could result it in being Debarred/Excluded is pending, and neither it nor any of its Affiliates has used, in any capacity in the performance of obligations relating to the Licensed Product, any employee, subcontractor, consultant, agent, representative, or other Person who has been Debarred/Excluded.

10.1.3

All consents, approval, and authorizations from all Governmental Authorities (other than (a) as of the Execution Date, those required under applicable Antitrust Laws and (b) the Regulatory Approvals and, if applicable, any Reimbursement Approvals contemplated to be obtained pursuant to this Agreement) or other Third Parties (including, with respect to uniQure, under all Existing In-Licenses) required to be obtained by such Party in connection with this Agreement or to perform all of the actions contemplated hereby have been obtained.

10.1.4

This Agreement has been duly executed by it and is legally binding upon it, enforceable in accordance with its terms, and does not conflict with any agreement, instrument or understanding, oral or written, to which it is a party or by which it may be bound, nor (assuming all consents, approvals, and authorizations contemplated in clause (a) of Section 10.1.3 have been obtained) violate any material Applicable Law or regulation of any court, governmental body, or administrative or other agency having jurisdiction over it.

10.1.5

Such Party has sufficient financial wherewithal to (a) perform all of its obligations set forth under this Agreement, and (b) meet all of its obligations that come due in the ordinary course of business.

10.2

Representations and Warranties of uniQure.  uniQure represents and warrants to Partner as of the Execution Date as follows:

10.2.1

uniQure and its Affiliates are the sole legal and beneficial owner of all of the uniQure Technology with respect to the Licensed Product that is not licensed to uniQure under the Existing In-Licenses, free and clear of all Encumbrances other than as set forth on Schedule 10.2.1 (Permitted Encumbrances), and have sufficient rights under the uniQure Technology to grant to Partner the licenses set forth in this Agreement, and none of them have granted to any other Person any license or other right under the uniQure Technology with respect to the Licensed Product.

10.2.2

Schedule 10.2.2 (uniQure Patent Rights) sets forth the uniQure Patent Rights that are owned or exclusively licensed by uniQure or any of its Affiliates in the Territory and that exist as of the Execution Date.  With respect to any uniQure Patent Right identified on Schedule 10.2.2 (uniQure Patent Rights) as being owned by uniQure or any of its Affiliates, uniQure or such Affiliate owns all rights, title, and interests in and to such uniQure Patent Rights, free and clear of all Encumbrances other than as set forth on Schedule 10.2.1 (Permitted Encumbrances), or any claims or interests of any current or former employee or contractor with respect to the Licensed Product.

10.2.3

All issued patents included in the uniQure Patent Rights are subsisting and unexpired and, to uniQure’s Knowledge, valid and enforceable, and all filings and fees required to maintain such issued patents prior to the Execution Date have been timely and satisfactorily made. UniQure has at all times complied with its duty of disclosure or candor to any Governmental Authority that issues patents and has not engaged in any act or omission at any such Governmental Authority that would

10.2.4

uniQure has provided Partner with unredacted and otherwise true copies of each Existing In-License entered into by uniQure or its Affiliates and listed on Schedule 2.5 (Existing In-Licenses) as of the Execution Date.  The licenses on Schedule 2.5 (Existing In-Licenses) are all of the licenses of intellectual property pursuant to which uniQure or any of its Affiliates Control any uniQure Technology.  Neither uniQure nor any of its Affiliates is or is alleged to be in default of any Existing In-License and, to uniQure’s Knowledge, no other party to any Existing In-License is in default thereof.  The actions contemplated by this Agreement will not violate any Existing In-License or give any other party the right to modify its terms in any manner adverse to Partner with respect to the Licensed Products.  All parties to the Existing In-Licenses are, to uniQure’s Knowledge, in good standing thereunder, and no such party has issued or received any notice of breach, default, termination, cancellation or non-renewal with respect thereto.  uniQure has performed its obligations, if any, under any applicable Existing In-License in order to allow Partner to obtain a direct patent license on substantially the same terms in the event of termination of uniQure’s license in the applicable circumstances.

10.2.5

There is no pending or, to uniQure’s Knowledge, threatened (in writing) claim, action, litigation, or proceeding, nor has uniQure or its Affiliates received any written notice from any Third Party, asserting or alleging that (a) the Exploitation of the Lead Product in the Field prior to the Execution Date in or for the Territory infringed or misappropriated the intellectual property rights of such Third Party or (b) except as set forth on Schedule 10.2.5 (Third Party Claims), any of the uniQure Technology is invalid or unenforceable.

10.2.6

To uniQure’s Knowledge, the Manufacturing, Development and Commercialization of the Licensed Products will not infringe or violate the intellectual property of any Person. For the purposes of this Section 10.2.6, “uniQure’s Knowledge” takes into account the contents of uniQure’s periodic, ordinary course freedom-to-operate monitoring and analysis, and reasonable belief.

10.2.7

Except to the extent set forth in any Existing In-License, no funds, personnel, equipment, or resources of any Governmental Authority, university, college, research, or other institution were used in connection with the invention or development of any uniQure Technology, and neither uniQure nor any of its Affiliates has any obligation to grant to any Third Party any license or consent under the uniQure Technology in a manner that is inconsistent with the licenses granted to Partner with respect to the Licensed Products hereunder.

10.2.8

There are no legal claims, judgments, or settlements against or owed by uniQure or any of its Affiliates, or pending or, to uniQure’s Knowledge, threatened, legal claims or litigation, in each case, relating to antitrust, anti-competition, or Anti-Corruption Law violations.

10.2.9

To uniQure’s Knowledge, neither uniQure nor any of its Affiliates, or its or their directors, officers, employees, distributors, agents, representatives, sales intermediaries, or other Third Parties acting on behalf of uniQure or any of its Affiliates has violated any applicable Anti-Corruption Laws in any material respect in the past five years.

10.2.10

To uniQure’s Knowledge, neither uniQure nor any of its Affiliates, or its or their directors, officers, employees, distributors, agents, representatives, sales intermediaries, or other Third Parties acting on behalf of uniQure or any of its Affiliates has made any untrue statement of a material fact or fraudulent statement to any Governmental Authority or Institutional Review Board, or failed to disclose any material fact required to be disclosed to any Governmental Authority or Institutional Review Board, or has committed any act, made any statement or failed to make any statement that would reasonably be expected to provide a basis for the FDA to invoke its policy, “Fraud, Untrue Statements of Material Facts, Bribery, and Illegal Gratuities” set forth in 56 Fed. Reg. 46191 (Sept. 10, 1991) or for any other Governmental Authority to invoke any similar policy.

10.2.11

Neither uniQure nor any of its Affiliates is subject to any obligation or requirement arising under any injunction, consent decree, inspection report, warning letter, untitled letter, notice of violation letter, FDA Form 483, notice of adverse findings or other regulatory or administrative action issued by or entered into with any Governmental Authority or Institutional Review Board. uniQure and its Affiliates are not the subject of any pending or threatened enforcement or other action that asserts a lack of compliance or failure to comply in any material respect with any Applicable Law. uniQure, its Affiliates, and its Subcontractors hold all consents, registrations, licenses, and permits required under Applicable Law for the Development and Manufacturing of the Licensed Product (as conducted as of the Execution Date).

10.2.12

Each Licensed Product has been Developed in material compliance with all Applicable Laws, including all GLP and GCP.

10.3

Representations and Warranties of Partner.  Partner represents and warrants to uniQure as of the Execution Date as follows:

10.3.1

There are no legal claims, judgments, or settlements against or owed by Partner or any of its Affiliates, or pending or, to Partner’s Knowledge, threatened, legal claims or litigation, in each case, relating to antitrust, anti-competition, or Anti-Corruption Law violations, except as would not, individually or in the aggregate, reasonably be expected to have a material adverse effect on Partner’s ability to perform its obligations under this Agreement.

10.3.2

To Partner’s Knowledge, neither Partner nor any of its Affiliates, or its or their directors, officers, employees, distributors, agents, representatives, sales intermediaries, or other Third Parties acting on behalf of Partner or any of its Affiliates has violated any applicable Anti-Corruption Laws in any material

10.4

Compliance Covenants.  Each Party covenants to the other Party that, in the course of performing its obligations or exercising its rights under this Agreement, it will comply with all Applicable Laws and, without limiting the foregoing:

10.4.1

it will not employ or engage, and if so employed and engaged, it will thereafter cease to use any Person who has been Debarred/Excluded (including any Subcontractor) or is the subject of any proceedings that could result in such Person being Debarred/Excluded;

10.4.2

it will not perform any actions that are prohibited by any Anti-Corruption Laws that are applicable to it; and

10.4.3

it will not, directly or indirectly, make any payment, or offer or transfer anything of value, or agree or promise to make any payment or offer or transfer anything of value, to a government official or government employee, to any political party or any candidate for political office, or to any other Third Party with the purpose of influencing decisions related to either Party or its Affiliates or its or their respective businesses in a manner that would violate Anti-Corruption Laws.

10.5

NO OTHER WARRANTIES.  EXCEPT AS EXPRESSLY STATED IN THIS ARTICLE 10 (REPRESENTATIONS, WARRANTIES, AND COVENANTS), (A) NO REPRESENTATION, OR WARRANTY IS MADE OR GIVEN BY OR ON BEHALF OF UNIQURE OR PARTNER; (B) ALL OTHER REPRESENTATIONS OR WARRANTIES WHETHER ARISING BY OPERATION OF LAW OR OTHERWISE ARE EXPRESSLY EXCLUDED, INCLUDING ANY REPRESENTATIONS OR WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT; AND (C) ANY INFORMATION PROVIDED BY EITHER PARTY OR ITS AFFILIATES IS MADE AVAILABLE ON AN “AS IS” BASIS WITHOUT REPRESENTATION OR WARRANTY WITH RESPECT TO COMPLETENESS, COMPLIANCE WITH REGULATORY STANDARDS OR REGULATIONS, OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER KIND OF WARRANTY WHETHER EXPRESS OR IMPLIED.

10.6

Additional Covenants Prior to the Effective Date.

10.6.1

Actions Prior to the Effective Date.  Each Party covenants to the other Party that, from the Execution Date through the Effective Date, such Party shall not knowingly take any action and shall not knowingly omit to take any action if, as a result of such action or inaction, any of the representations and warranties of such Party (a) in the case of uniQure, in Section 10.1 (Representations and Warranties of Each Party) and Section 10.2 (Representations and Warranties of uniQure) or (b) in the case of Partner, in Section 10.1 (Representations and Warranties of Each Party) and Section 10.3 (Representations and Warranties of Partner), would have been untrue

10.6.2

uniQure Additional Covenants Prior to the Effective Date. Prior to the Effective Date, except (a) as may be required by Applicable Law, or (b) as Partner may otherwise approve in writing (with such approval not to be unreasonably withheld, conditioned or delayed), uniQure will (and it will cause its controlled Affiliates to) use Commercially Reasonable Efforts to conduct those Development and Manufacturing development activities with respect to the Licensed Products and the AAV5 NAb Assay included under the interim plan set forth in Schedule 10.6.2 (uniQure Interim Development and Manufacturing Development Plan) (the “uniQure Interim Plan”) by the applicable target dates set forth in the uniQure Interim Plan, it being understood that the mere fact that any activity under the uniQure Interim Plan the applicable target date for which is later than the Effective Date is commenced but not completed by uniQure on the Effective Date shall not be deemed to be a breach of uniQure’s obligations under this Section 10.6.2 (uniQure Additional Covenants Prior to the Effective Date).  During the period prior to the Effective Date, uniQure will provide (and will cause its controlled Affiliates to provide) to Partner (i) copies of each of the reports and manuscripts referred to in the uniQure Interim Plan, promptly after such report or manuscript has been prepared, and (ii) such other reasonable reports and information relating to the Development or Manufacturing development of the Licensed Products as Partner reasonably may request in writing, as soon as reasonably practicable after such request, in each case, subject to Applicable Laws and it being understood that such reports, manuscripts, and information shall be the Confidential Information of uniQure and subject to the provisions of Article 9 (Confidentiality; Publications).

10.6.3

[*].  Prior to the Effective Date, at Partner’s request, uniQure will reasonably assist Partner’s efforts to [*] in conjunction with the Licensed Products and the AAV5 NAb Assay, in those countries in the Territory in which Partner intends to Commercialize the Licensed Products (including Commercialization with the AAV5 NAb Assay), as identified in the Commercialization Plan.  At any time after the Effective Date, at Partner’s reasonable request, [*] and (ii) reasonable personnel assistance to understand and use the foregoing.

10.6.4

Partner Activities Prior to the Effective Date.  Prior to the Effective Date, without limiting any other rights Partner may have under this Agreement or otherwise, subject to Applicable Laws, Partner will use Commercially Reasonable Efforts to conduct planning activities it reasonably determines are necessary to prepare for Commercialization of the Licensed Products following the Effective Date.  Upon uniQure’s reasonable request, Partner will provide uniQure with periodic updates regarding the progress of such activities to the extent permitted by Applicable Laws and it being understood that such information provided by Partner shall be the Confidential Information of Partner and subject to the provisions of Article 9 (Confidentiality; Publications).

10.7

Compliance with Laws.  Partner understands and acknowledges that uniQure is subject to regulation by Governmental Authorities in the E.U., including the European Commission, and in the U.S., including the U.S. Department of Commerce and the U.S. Treasury Department’s Office of Foreign Assets Control, which regulate the import, export, and diversion of certain products and technology from and to certain countries. Any and all obligations of uniQure to provide the Licensed Product, as well as any other technical information or assistance, and all rights on the part of Partner to perform its obligations hereunder, will be subject in all respects to such Applicable Law in the E.U. and the U.S. as will from time to time govern the license and delivery of technology and products abroad by Persons subject to the jurisdiction of the European Union or United States, as applicable, including, with respect to the E.U., Regulation (EC) No 428/2009 and, with respect to the U.S., regulations promulgated under Executive Order No. 12924 of August 19, 1994 issued pursuant to the President’s authority under the International Emergency Economic Powers Act, Title 50 U.S. C., Chapter 35, Section 1701 et seq. and those contained in Title 31, Part 500 of the U.S. Code of Federal Regulations. Partner will cooperate with uniQure including providing required documentation, in order to comply with any and all Applicable Law in the E.U. and the U.S.  Both Parties will cooperate with the other as reasonably required, including providing required documentation, in order to comply with all Applicable Law in the E.U. and the U.S. governing exports that are applicable to the Parties and products in question.

10.8

Limitation on Claims.  Except in the case of any fraud or intentional misrepresentation by a Party, and without limiting a Party’s rights under Article 11 (Indemnification): (a) the representations and warranties of each of the Parties contained in Section 10.1 (Representations and Warranties of Each Party) (other than Section 10.1.1, Section 10.1.2 and Section 10.1.4), Section 10.2 (Representations and Warranties of uniQure) (other than in Section 10.2.1 and Section 10.2.2), and Section 10.3 (Representations and Warranties of Partner), in each case, will survive until the date that is [*] after the Effective Date; (b) the representations and warranties of each of the Parties contained in Section 10.1.1, Section 10.1.2, and Section 10.1.4 and of uniQure in Section 10.2.1 and Section 10.2.2 will survive until the date that is [*] following the Execution Date; (c) no claim may be made or suit instituted alleging breach or seeking indemnification pursuant to Article 11 Indemnification) for any breach of, or inaccuracy in, any representation or warranty contained in Section 10.1 (Representations and Warranties of Each Party), Section 10.2 (Representations and Warranties of uniQure), or Section 10.3 (Representations and Warranties of Partner) unless a written notice is provided to the Indemnifying Party at any time prior to the date that is [*] after the expiration of the relevant survival period as set forth in clause (a) or (b) above; and (d) after the expiration of the time period for bringing claims for breach of representation or warranty as set forth in clause (c) above, a Party may not bring any claim against the other Party arising from or relating to such other Party’s breach of such representation or warranty.

11.1

By Partner.  Partner will indemnify and hold harmless uniQure and its Affiliates, and their respective directors, officers, employees, successors, heirs and assigns, and agents

11.2

By uniQure.  uniQure will indemnify and hold harmless Partner, its Affiliates, and their directors, officers, employees, successors, heirs and assigns, and agents (individually and collectively, the “Partner Indemnitees”) from and against all Losses incurred in connection with any Third Party Claims to the extent arising from or relating to (a) the Development or Manufacture of any Licensed Product by or on behalf of uniQure or any of its Affiliates, licensees (not including Partner or its Affiliates, Sublicensees, or Subcontractors), Sublicensees, or Subcontractors, including product liability claims arising from such Development or Manufacture, (b) the gross negligence or willful misconduct of uniQure or any of its Affiliates, licensees (not including Partner or its Affiliates, Sublicensees, or Subcontractors), Sublicensees, or Subcontractors, (c) the fraud of uniQure or any of its controlled Affiliates, (d) uniQure’s breach of any of its representations, warranties, covenants, or obligations set forth in or entered into pursuant to this Agreement, (e) the failure of uniQure or any of its Affiliates, licensees (not including Partner or its Affiliates, Sublicensees, or Subcontractors), or Subcontractors to abide by any Applicable Law, or (f) any claim or demand from any employee or contractor of uniQure or any of its Affiliates who is an inventor of any Joint Technology with respect to the ownership thereof, in each case of clauses (a) through (f) above, except to the extent such Third Party Claims arise out of any of a Partner Indemnitee’s gross negligence, willful misconduct, or fraud, breach of this Agreement, or failure to abide by any Applicable Law.

11.3

Indemnification Procedure.  If either Party is seeking indemnification under Section 11.1 (Indemnification; By Partner) or Section 11.2 (Indemnification; By uniQure) (the “Indemnified Party”), then it will inform the other Party (the “Indemnifying Party”) of the Third Party Claim giving rise to such indemnification obligations within [*] after receiving written notice of the Third Party Claim (it being understood and agreed, however, that the failure or delay by an Indemnified Party to give such notice of a Third Party Claim will not affect the Indemnifying Party’s indemnification obligations hereunder except to the extent the Indemnifying Party will have been actually and materially prejudiced as a result of such failure or delay to give notice).  The Indemnifying Party will have the right to assume, with counsel of its choice, the defense of any such Third Party Claim for which it is obligated to indemnify the Indemnified Party.  The Indemnified Party will cooperate with the Indemnifying Party and the Indemnifying Party’s insurer as the Indemnifying Party may reasonably request, and at the Indemnifying Party’s cost and expense.  The Indemnified Party will have the right to participate, at its own expense and with counsel of its choice, in the defense of any Third Party Claim that has been assumed by the Indemnifying Party.  Neither Party will have the obligation to indemnify the other Party in connection with any settlement made without the first Party’s written consent, which consent will not be unreasonably withheld.  The Indemnifying Party will not admit liability of the Indemnified Party without the Indemnified Party’s prior written consent, which consent may be withheld in the Indemnified Party’s reasonable discretion.  If the Parties cannot agree as to the application of Section 11.1 (Indemnification; By Partner) or Section 11.2 (Indemnification; By uniQure) as to any Third Party Claim, pending resolution of the Dispute pursuant to Article 14 (Dispute Resolution), then the Parties may conduct separate defenses of such Third Party Claims, with each Party retaining the right to claim indemnification from the other Party in accordance with Section 11.1 (Indemnification; By Partner) or Section 11.2 (Indemnification; By uniQure), as applicable, upon resolution of the underlying Third Party Claim.

11.4

Insurance.  Each Party will procure and maintain during the Term of this Agreement and until the later of: (a) [*] after termination or expiration of this Agreement, or (b) the date that all statutes of limitation covering claims or suits that may be instituted for personal injury based on the sale or use of a Licensed Product have expired, commercial general liability insurance from a minimum of “A-” AM Bests rated insurance company or insurer reasonably acceptable to the other Party, including product liability or clinical trials, if applicable, with coverage limits of not less than $[*] per occurrence and $[*] in the aggregate. Such policies will add the other Party and its Affiliates as additional insureds and provide a waiver of subrogation in favor of the other Party and its Affiliates. Such insurance policies will be primary and non-contributing with respect to any other similar insurance policies available to the other Party or its Affiliates.  Any deductibles for such insurance will be assumed by the Party maintaining such insurance.  Each Party will provide to the other Party with evidence of such insurance (i) promptly following the execution by both Parties of this Agreement, (ii) upon a Party’s request to the other Party, and (iii) prior to expiration of any one coverage. Each Party will provide the other Party with written notice at least [*] prior to the cancellation or non-renewal of, or material changes in, such insurance.  Such insurance will not be construed to create a limit on Partner’s or uniQure’s respective liability with respect to its indemnification obligations under this Article 11 (Indemnification).

12.1

Inventions.

12.1.1

Ownership.  As between the Parties, (a) uniQure will solely own all uniQure Technology and all Know-How developed or invented in the performance of activities under this Agreement solely by uniQure’s or its Affiliates’, licensees’, or Subcontractors’ employees, agents, or independent contractors, or any Persons contractually required to assign such Know-How to uniQure or any Affiliate of uniQure and all Patent Rights that Cover any Inventions in such Know-How, but excluding Joint Technology, (b) Partner will solely own all Partner Technology, including all Know-How developed or invented in the performance of activities under this Agreement solely by Partner or its Affiliates’, licensees’, Sublicensees’, or Subcontractors’ employees, agents, or independent contractors, or any Persons contractually required to assign such Know-How to Partner or any Affiliate of Partner and all Patent Rights that Cover any Inventions in such Know-How, but excluding Joint Technology, and (c) the Parties will jointly own all Joint Technology. Subject only to the rights expressly granted to the other Party under this Agreement, each Party, as between such Party and the other Party, will own all rights, title, and interests in and to any Know-How that is invented, conceived, discovered, created, or otherwise developed by or on behalf of such Party (or its Affiliates or its Sublicensees) under or in connection with this Agreement, whether or not patented or patentable, and any and all Patent Rights and other intellectual property rights with respect thereto. For purposes of determining ownership of Inventions under this Agreement, all determinations of inventorship under this Agreement will be made in accordance with U.S. patent law.

12.1.2

Disclosure.  Each Party will disclose to the other Party, at least [*] in advance of each JSC meeting, all Inventions that it develops or invents in the performance of activities under this Agreement, whether solely or jointly with others (in any event, prior to the filing of any patent application with respect to such Inventions), including all invention disclosures or other similar documents submitted to a Party by its or its Affiliates’ employees, agents, or independent contractors relating thereto that may reasonably be anticipated to be material to the other Party.  Each Party will also promptly respond to reasonable requests from the other Party for additional information relating thereto.

12.2

Practice Under and Other Use of Joint Technology.  Subject to the rights granted under and the restrictions set forth in this Agreement (including the licenses granted under Article 2 (Licenses) and the restrictions set forth in Section 2.6 (Exclusivity Covenant)), each Party will be entitled to the free use and enjoyment of all Joint Technology and neither Party will have any obligation to account to the other Party for profits, or to obtain any approval of the other Party to license, assign, or otherwise exploit its interest in any Joint Technology by reason of joint ownership thereof. Each Party hereby waives any right it may have under the Applicable Law of any jurisdiction to require any such approval or accounting.  To the extent any further consent is required to enable a Party to so license or exploit its interest

12.3

CREATE Act.  Notwithstanding any provision to the contrary set forth in this Agreement, if a Party wishes to invoke the Cooperative Research and Technology Enhancement Act, 35 U.S.C. § 102(c) (the “CREATE Act”) when exercising its rights under this Agreement, then it will notify the other Party and if agreed by the other Party, then the Parties will cooperate and coordinate their activities with respect to any filings or other activities in support thereof.  The Parties acknowledge and agree that this Agreement is a “joint research agreement” as defined in the CREATE Act.

12.4

Patent Prosecution.

12.4.1

uniQure Platform Patent Rights and uniQure Manufacturing Patent Rights.

(a)

Right to Prosecute.  Except as set forth in Section 12.5.2(b) (Partner First Right), as between the Parties, uniQure will have the sole right (subject to Section 12.4.1(b) (Review and Consult)) to control the Patent Prosecution of all uniQure Platform Patent Rights and uniQure Manufacturing Patent Rights, in each case, throughout the Territory at its sole cost and expense.

(b)

Review and Consult.  uniQure will consult with Partner and keep Partner reasonably informed of the Patent Prosecution of the uniQure Platform Patent Rights and will provide Partner with all material correspondence received from any patent authority in the Territory in connection therewith.  In addition, uniQure will provide Partner with drafts of all proposed material filings and correspondence to any patent authority in its respective territory in connection with the Patent Prosecution of the uniQure Platform Patent Rights and uniQure Manufacturing Specified Patent Rights for Partner’s review and comment prior to the submission of such proposed filings and correspondence. uniQure will consider Partner’s comments on Patent Prosecution of such Patent Rights in good faith and will incorporate such comments where appropriate, but will have final decision-making authority under this Section 12.4.1(b) (Review and Consult).

12.4.2

Product Patent Rights.

(a)

Right to Prosecute.  Except as set forth in Section 12.5.2(b) (Partner First Right), uniQure will have the first right to control the Patent Prosecution of any uniQure Product Patent Rights in the Territory, at uniQure’s sole cost and expense. uniQure will use reasonable efforts in connection with such Patent Prosecution to obtain and maintain any granted claims.

(b)

Review and Consult.  uniQure will consult with Partner and keep Partner reasonably informed of the Patent Prosecution of the uniQure Product Patent Rights, including discussing further claims that may be filed in the

(c)

Abandonment.  If uniQure decides that it is no longer interested in the Patent Prosecution of a particular uniQure Product Patent Right in the Territory, then it will promptly (and reasonably in advance of any applicable deadline) provide written notice to Partner of such decision.  Partner may in its discretion, upon written notice to uniQure, assume the Patent Prosecution of such Patent Right.  In such event, Partner will be responsible for 100% of the costs and expenses incurred with respect to the Patent Prosecution of such Patent Rights in the Territory, and such Patent Rights will no longer be considered uniQure Royalty Patent Rights for the purposes of this Agreement.

12.4.3

Joint Patent Rights.

(a)

Right to Prosecute.  Partner will have the first right to control the Patent Prosecution of any Joint Patent Rights, in each case, in the Territory, at Partner’s sole cost and expense.

(b)

Review and Consult.  Partner will consult with uniQure and keep uniQure reasonably informed of the Patent Prosecution of the Joint Patent Rights and will provide uniQure with all material correspondence received from any patent authority in the Territory in connection therewith. In addition, Partner will provide uniQure with drafts of all proposed material filings and correspondence to any patent authority in its respective territory in connection with the Patent Prosecution of the Joint Patent Rights for uniQure’s review and comment prior to the submission of such proposed filings and correspondence. Further, Partner will notify uniQure if it is contemplating ceasing Patent Prosecution of any of the Joint Patent Rights. Partner will consider uniQure’s comments on Patent Prosecution of such Joint Patent Rights in good faith and will incorporate such comments where appropriate, but Partner will have final decision-making authority under this Section 12.4.2(b) (Review and Consult).

(c)

Abandonment.  If Partner decides that it is no longer interested in the

12.5

Patent Enforcement.

12.5.1

Notice.  Each Party will notify the other Party within [*] after becoming aware of any alleged or threatened infringement by a Third Party product that is competitive with any Licensed Product of any of the (a) uniQure Patent Rights Covering a Licensed Product or (b) Joint Patent Rights, (“Product Infringement”).  The Party with the first right to bring and control any legal action to enforce the uniQure Patent Rights or other Joint Patent Rights, as applicable, under this Section 12.5 (Patent Enforcement) will be referred to herein as the “Controlling Party.”

12.5.2

First Right and Step-In for Product Infringement.

(a)

Partner First Right – Enforcement. Subject to Section 12.5.2(c) (uniQure Blocking Right) Partner will have the first right to bring and control, at its sole cost and expense, any legal action or proceeding to enforce the uniQure Product Patent Rights, uniQure Manufacturing Specified Patent Rights, uniQure Platform Patent Rights, (in each case, other than as set forth in Section 12.5.3 (uniQure Sole Right)), and Joint Patent Rights against any Product Infringement in the Field in the Territory as it reasonably determines appropriate, and Partner will consider in good faith the interests of uniQure in such enforcement of such Patent Rights.

(b)

Partner First Right – Invalidity. Partner will have the first right to control, at its sole cost and expense, any legal action or proceeding to defend any uniQure Product Patent Rights, uniQure Manufacturing Specified Patent Rights, uniQure Platform Patent Rights, and Joint Patent Rights against any declaratory judgments or adversarial proceedings, including, and notwithstanding anything to the contrary in this Agreement, IPRs, PGRs, re-examinations, oppositions or equivalent actions, challenging the validity, scope or enforceability or alleging the non-infringement of such Patent Rights as Partner reasonably determines appropriate, solely to the extent the foregoing arise as a result of any legal action or proceeding by Partner pursuant to Section 12.5.2(a) (Partner First Right – Enforcement) and are not part of Patent Prosecution activities.

(c)

uniQure Blocking Right. Partner’s right under Section 12.5.2(a) (Partner First Right – Enforcement) to enforce the uniQure Platform Patent Rights or uniQure Manufacturing Specified Patent Rights requires the prior written consent of uniQure, which may not be unreasonably withheld.  If uniQure

(d)

Step-In Rights.  If the Controlling Party or its designee fails to ▇▇▇▇▇ the applicable Product Infringement in the Territory; or file an action to ▇▇▇▇▇ such Product Infringement in the Territory within [*] after a written request from the other Party to do so (or sooner, if reasonably necessary under the circumstances) or defend any action or proceeding in Section 12.5.2(b) (Partner First Right – Invalidity), or if the Controlling Party discontinues the prosecution of any such action or proceeding after filing without abating such infringement (or discontinues any such defense), then, in either case, the other Party will have the right to enforce the applicable Patent Rights against such Product Infringement in the Territory or defend such action or proceeding as it reasonably determines appropriate, which right for Product Infringement will be limited to Product Infringements in the Field if Partner is the non-Controlling Party; provided that (i) the Controlling Party does not provide reasonable rationale for not doing so or continuing to do so (including, for Product Infringement, a substantive concern regarding counter-claims by the infringing Third Party); (ii) the other Party will not enter into any settlement admitting the invalidity of, or otherwise impairing, any such Patent Rights without the prior written consent of the Controlling Party; and (iii) for a Product Infringement action, Partner will not have any right to enforce any uniQure Platform Patent Right if there are any uniQure Product Patent Rights, uniQure Manufacturing Specified Patent Rights or Joint Patent Rights that can be enforced against the applicable Product Infringement (regardless of whether or not uniQure seeks to take action against the applicable Product Infringement).

12.5.3

uniQure Sole Right.  uniQure will have the sole right to bring and control, at its sole cost and expense, any legal action or proceeding to enforce (a) the uniQure Manufacturing Patent Rights and (b) any uniQure Patent Rights not included in the uniQure Royalty Patent Rights, in each case in the Territory.

12.5.4

Recoveries.  Any recoveries resulting from an enforcement action relating to a claim of Product Infringement in the Territory will be first applied against payment of each Party’s costs and documented out-of-pocket Third Party expenses in connection therewith.  Any such recoveries after such application will be shared between the Parties as determined by the Parties at the applicable time based on their respective economic interests in such recovery, provided that (i) uniQure will retain [*]% of any remaining recoveries (after the above application) from the enforcement of any uniQure Patent Rights not included in the uniQure Royalty Patent Rights pursuant to clause (b) of Section 12.5.3 (uniQure Sole Right), and (ii) Partner will retain [*]% of any remaining recoveries (after the above application) from the enforcement of any uniQure Royalty Patent Rights that lose such status

12.6

Infringement of Third Party Rights.

12.6.1

Notice.  If any Licensed Product used or sold by Partner or its Affiliates or Sublicensees becomes the subject of a Third Party’s claim or assertion of infringement of a Patent Right or other rights in the Territory that are owned or controlled by such Third Party, then Partner will promptly notify uniQure within [*] after receipt of such claim or assertion and will include in such notice a copy of any summons or complaint (or the equivalent thereof) received regarding the foregoing.  Thereafter, the Parties will promptly meet to consider the claim or assertion and the appropriate course of action.

12.6.2

Defense.  Partner will be solely responsible for the defense of any infringement claims referenced in Section 12.6.1 (Notice) brought against Partner, at Partner’s cost and expense; provided that Partner will not agree to any settlement, consent to judgment, or other voluntary final disposition in connection with such defense action without uniQure’s prior written consent if such settlement, consent to judgment, or other voluntary final disposition would (a) result in the admission of any liability or fault on behalf of uniQure, (b) result in or impose any payment obligations upon uniQure, or (c) subject uniQure to an injunction or otherwise limit uniQure’s ability to take any actions or refrain from taking any actions under this Agreement or with respect to any Licensed Product.  Partner will keep uniQure informed on the status of such defense action, and uniQure will have the right, but not the obligation, to participate and be separately represented in such defense action at its sole option and at its own expense.  Partner may credit [*]% of any payments required to license any Patent Rights from any Third Party to resolve an infringement claim related to the Licensed Product against any Royalties due to uniQure under this Agreement, subject to Section 8.3.2(d) (Royalty Reductions Floor). Notwithstanding the foregoing or anything to the contrary set forth in this Agreement, uniQure will be solely responsible for the defense of any infringement claim, at uniQure’s cost and expense, brought with respect to Partner’s or uniQure’s (or their Affiliates’ and its and their respective Subcontractors’ and Sublicensees’) use of any step or method of Manufacturing provided by uniQure to Manufacture any Licensed Product, provided that uniQure will not agree to any settlement, consent to judgment, or other voluntary final disposition in connection with such defense action without Partner’s prior written consent if such settlement, consent to judgment, or other voluntary final disposition would (i) result in the admission of any liability or fault on behalf of Partner, its Affiliates or its or their respective Subcontractors or Sublicensees, (ii) result in or impose any payment obligations upon Partner or such Persons, or (iii) subject Partner or such Persons to an injunction or otherwise limit Partner’s or such Persons’ ability to take any actions or refrain from taking any actions under this Agreement or with respect to any Licensed Product.  uniQure will keep Partner informed on the status of such defense action, and Partner will have the right, but not the obligation, to participate and be separately represented in such defense action at its sole option and at its own

12.7

Patent Listings.  With respect to the FDA’s Purple Book and patent listings in any patent listing system established by any applicable Regulatory Authority in the Territory during the Term that is similar to the FDA Purple Book, for issued patents for any Licensed Product in the Field, the Parties will agree which patents, if any, to list in the FDA’s Purple Book and such other patent listing (a) prior to the submission to such applicable Regulatory Authority of the first and any subsequent MAA for such Licensed Product in the Field in the applicable country in the Territory, and (b) within [*] the receipt from such Regulatory Authority of the first and any subsequent Regulatory Approval in the Field in the Territory for such Licensed Product in such country.

12.8

Patent Term Extensions.  With respect to any system for extending the term of Patent Rights in the Territory established by any applicable Regulatory Authority during the Term that is similar to the patent term extension system in the U.S. (and in the U.S.), Partner will be solely responsible for making all decisions regarding patent term extensions in the Territory, including supplementary protection certificates and any other extensions that are now available or become available in the future, that are applicable to uniQure Product Patent Rights or Joint Patent Rights licensed hereunder and that become available directly as a result of the Regulatory Approval of a Licensed Product in the Territory; provided that Partner will consult with uniQure with respect to such decisions and will consider in good faith the comments of uniQure thereon.

12.9

Cooperation.  Each Party will provide the other Party all reasonable assistance and cooperation in connection with all activities under Sections 12.4 (Patent Prosecution), 12.5 (Patent Enforcement) and 12.6 (Infringement of Third Party Rights), including, as applicable, providing any necessary powers of attorney, executing other required documents, cooperating in discovery, keeping the other party reasonably informed of the status of the action or proceeding, taking good faith consideration of comments from the other party, and joining as a party to the action or proceeding if required by Applicable Law to pursue or maintain same.  Each Party, at its sole expense and discretion, may select and involve external counsel of its choice in connection with performing the foregoing and exercising its rights under the above sections.

12.10

Privilege.  The Parties intend and agree that any disclosures in connection with the activities under Section 12.4 (Patent Prosecution), Section 12.5 (Patent Enforcement) and Section 12.6 (Infringement of Third Party Rights), (a) must be treated by the receiving Party as confidential and in a manner that preserves all applicable privileges to the maximum extent possible; (b) are not deemed to waive any applicable privilege (including attorney-client privilege, attorney work product privilege and joint defense privilege) available to either or both Parties; and (c) are made in connection with the joint prosecution or joint defense (as applicable) and common legal interest of the Parties.   If requested by either Party, the Parties will execute a “common interest agreement”, “joint defense agreement” or similar agreement as appropriate to attempt to preserve all applicable privileges with respect to the above disclosures.

12.11

Patent Marking.  Partner will ▇▇▇▇ all Licensed Product in accordance with the applicable patent marking laws and will require all of its Affiliates and Sublicensees to do the same, and any of them may use virtual marking to do so.  To the extent permitted by Applicable Law, Partner will use reasonable efforts to indicate on the product packaging, advertisement and promotional materials that such Licensed Product is in-licensed from uniQure.

12.12

Termination of Rights. Partner’s rights under Section 12.4 (Patent Prosecution), Section 12.5 (Patent Enforcement), Section 12.7 (Patent Listings), and Section 12.8 (Patent Term Extension) will terminate upon the earlier of (a) Partner’s delivery to uniQure of notice of termination pursuant to Section 13.2.1 (Termination Without Cause), or (b) the effective date of the termination of this Agreement.

13.1

Term.  Unless earlier terminated in accordance with Section 13.2 (Termination), and without limiting or modifying Section 8.3.1 (Royalty Payments) with respect to expiration of the Royalty Term, this Agreement will be effective as of the Effective Date, and will continue, on a country-by-country basis, in full force and effect until the expiration of the Royalty Term in such country and will expire in its entirety upon the expiration of the final Royalty Term (the “Term”).  Following expiration of the Royalty Term in a country, the license grants in Section 2.1 (License Grants to Partner, Licensed Products and AAV5 NAb Assay) will remain in place for a period of [*], but will substitute the phrase “uniQure Technology other than the uniQure Royalty Patent Rights” in place of the term “uniQure Technology.”  Following the expiration of such [*] period, the license grants in Section 2.1 (License Grants to Partner, Licensed Products and AAV5 NAb Assay) will become non-exclusive, fully-paid, royalty-free, perpetual, and irrevocable for such country.

13.2

Termination.

13.2.1

Termination Without Cause.  Prior to receipt of the first Regulatory Approval of any Licensed Product in the first Major Country, Partner may terminate this Agreement in its entirety for convenience and without cause upon [*] prior written notice to uniQure. After receipt of the first Regulatory Approval of any Licensed Product in the first Major Country, Partner may terminate this Agreement in its entirety for convenience and without cause upon [*] prior written notice to uniQure.

13.2.2

Termination For Cause.

(a)

Defaults.  If a Party materially breaches any of its material obligations (including, for the avoidance of doubt, any of its obligations that are effective prior to the Effective Date as set forth in Section 15.1 (Effective Date)), excluding any breach or alleged breach by a Party to use Commercially Reasonable Efforts as required under this Agreement (as such breach of alleged breach will be governed by the provisions of Section 13.2.2(b) below) (a “Default”), then the non-defaulting Party may deliver

(b)

CRE Defaults.  If a Party (the “Alleging Party”) believes in good faith that the other Party (the “Alleged Party”) has not used Commercially Reasonable Efforts as required under this Agreement (a “CRE Default”), then the Alleging Party may deliver notice to the Alleged Party describing in reasonable detail the alleged CRE Default in question, including the specific alleged failure(s) of the Alleged Party to use such Commercially Reasonable Efforts (a “CRE Default Notification”).  Within [*] after receipt of a CRE Default Notification, the Alleged Party will either (x) submit in writing to the Alleging Party a good faith cure plan setting out the rectifying steps proposed to be taken by the Alleged Party to cure its alleged failure(s) to use Commercially Reasonable Efforts, including a timeline for doing so (a “CRE Cure Plan”), or (y) submit in writing to the Alleging Party a good faith explanation in reasonable detail as to why the Alleged Party disagrees with the alleged CRE Default (a “CRE Explanation”).

(i)

CRE Cure Plans.  If the Alleged Party timely submits a CRE Cure Plan in accordance with the foregoing clause (b), then within [*] thereafter the Alleging Party, having considered the CRE Cure Plan in good faith, will respond in writing to the Alleged Party either accepting such CRE Cure Plan, proposing to modify such CRE Cure Plan (in which case the proposed modifications will be specified in

(ii)

CRE Explanation.  If the Alleged Party timely submits a CRE Explanation in accordance with the foregoing clause (b), then within [*] thereafter the Alleging Party, having considered the CRE Explanation in good faith, will respond in writing to the Alleged Party either accepting or rejecting the CRE Explanation. If the Alleging Party accepts the CRE Explanation (or fails to timely respond), then the related CRE Default Notification will be deemed revoked and the Alleged Party will have no further obligation in respect thereof. If either (A) the Alleging Party timely rejects the CRE Explanation or (C) the Alleging Party timely rejects the CRE Cure Plan in accordance with the foregoing sub-clause (i), then the alleged CRE Default (including the matters that have transpired between the Parties pursuant to this Section 13.2.2(b) in respect thereof) will be referred to the Executive Officers for attempted resolution.  If the Executive Officers are unable to resolve the alleged CRE Default within [*] after such matter is referred to them, then, upon the written request of either Party to the other Party, the alleged CRE Default will be subject to arbitration in accordance with Section 14.2 (Arbitration) (and, for the avoidance of doubt, the pre-arbitration negotiation procedure set forth in Section 14.1 (Pre-Arbitration Negotiation) will not apply) to determine whether or not such CRE Default occurred.

(iii)

Resolution by Arbitration.  If the alleged CRE Default is referred to arbitration in accordance with the foregoing sub-clause (ii), then:

(c)

Payment Adjustment in Lieu of Termination for Third Party Competitive Product.

(i)

If (i) Partner has the right to terminate this Agreement pursuant to, and in accordance with, clause (a) or clause (b) of Section 13.2.2 (Termination for Cause) as a result of a Default or CRE Default, respectively, of uniQure of any of its obligations under this Agreement and (ii) as a proximate cause of such Default (in the case of a termination right under Section 13.2.2(a)) or such CRE Default (in the case of a termination right under Section 13.2.2(b)), as the case may be, a Competitive Product of any Third Party achieves (x) [*] or (y) [*], it being understood that, unless uniQure expressly agrees or stipulates that such Default or CRE Default was the proximate cause of such eventuality, such question of proximate cause must be raised and determined in the same arbitration that determines such Default or CRE Default (except in the case of a Default of uniQure of its obligations under Section 2.6 (Exclusivity Covenant) where such proximate causation shall be presumed absent a specific determination to the contrary in such arbitration), then, without limiting its right to terminate this Agreement or to seek any other available remedies in connection with such Default or CRE Default, Partner may provide written notice to uniQure requiring the Parties to, in good faith, renegotiate any remaining Milestone Payments and the Royalty Rates as promptly as reasonably practicable after the provision of such notice, provided that such reduction [*].

(ii)

If uniQure does not dispute the applicability of this Section 13.2.2(c) (Payment Adjustment in Lieu of Termination for Third Party Competitive Product) or if it is otherwise agreed or determined to be applicable pursuant to, and in accordance with, clause (a) or clause (b) of Section 13.2.2 (Termination for Cause) or Article 14 (Dispute Resolution), but the Parties fail to agree upon the renegotiated Milestone Payments and Royalty Rates within [*] after delivery of such notice, then such dispute regarding the renegotiated Milestone Payments and Royalty Rates will be resolved in accordance with the specified expedited arbitration procedures set forth in Section 14.7 (Specified Expedited Arbitrations) (and, for the avoidance of doubt, the pre-arbitration negotiation procedure set forth in Section 14.1 (Pre-Arbitration Negotiation) will not apply).  After the resolution of the renegotiated Milestone Payments and Royalty Rates by the Parties’ agreement under this clause (c) or (where a dispute has been referred to specified expedited arbitration) by the arbitrator’s award in accordance with Section 14.7 (Specified Expedited Arbitrations), Partner may either: (A) accept such resolution (in which case such will be Partner’s sole and exclusive remedy and Partner will be deemed to have waived its rights to terminate this Agreement pursuant to clause (a) or clause (b) of Section 13.2.2 (Termination for Cause), as applicable, and to seek any other available remedies in connection with such Default or CRE Default); or (B) terminate this Agreement pursuant to, and in accordance with, clause (a) or clause (b) of Section 13.2.2 (Termination for Cause), as applicable, and seek any other available remedies in connection with such Default or CRE Default, subject to the terms of this Agreement.

(d)

Notwithstanding anything in this Agreement to the contrary and without limiting uniQure’s other rights and remedies under the circumstances, uniQure does not have the right to terminate this Agreement under this Section 13.2.2 (Termination For Cause) due to (i) a breach by Partner of Section 12.1.2 (Disclosure); or (ii) any act or omission of a Subcontractor or Sublicensee, provided that Partner complies with its own obligations in Section 2.2.4 (Terms of Sublicensing and Subcontractor Agreements) or its termination obligation in the last sentence of Section 2.2.6 (Responsibility for Sublicensees and Subcontractors), unless and until the arbitration panel in an arbitration conducted in accordance with Article 14 (Dispute Resolution) rules that Partner has intentionally and materially breached such covenant by practicing an invention that infringes a claim in clause (i) of the definition of “Valid Claim” with respect to a uniQure Royalty Patent Right.

13.2.3

Termination for Patent Challenge.  uniQure may terminate this Agreement in its entirety by providing written notice of termination to Partner if Partner or its Affiliates or Sublicensees (individually or in association with any Person) contests or assists a Third Party in contesting the scope, validity, or enforceability of any

13.2.4

Failure to Commercialize.  If Partner and its Affiliates and Sublicensees do not conduct any material Commercialization activities with respect to any Licensed Products in any of the Major Countries for a continuous period of longer than [*] at any time following the First Major Regulatory Approval and such failure to conduct any material Commercialization activities during such period is not: [*], then uniQure may deliver written notice to Partner of its intent to terminate this Agreement in its entirety, effective [*] after Partner’s receipt of such notice, provided that, if Partner or any of its Affiliates or Sublicensees commences any material Commercialization activity with respect to any Licensed Product in any single Major Country during such [*] period, then this Agreement will not terminate upon the expiration of such [*] period.  By way of illustration only, if, following the First Major Regulatory Approval, Partner or any of its Affiliates or Sublicensees conducted material Commercialization activities in a Major Country (for example, [*]) in a [*] period, then this Section 13.2.4 (Failure to Commercialize) will not apply with respect to such [*] period even if Partner or any of its Affiliates or Sublicensees had not conducted material Commercialization activities in any other Major Country in the same [*] period.  For the avoidance of doubt, the existence of

13.2.5

Full Force and Effect During Notice Period.  This Agreement will remain in full force and effect until the expiration of the applicable termination notice period.  For clarity, if Partner or any of its Affiliates or Sublicensees achieve any Milestone Events during the termination notice period, then the corresponding Milestone Payment is accrued and Partner will remain responsible for the payment of such Milestone Payment even if the due date of such Milestone Payment occur, after the effective date of the termination.

13.3

Effect of Termination.  In the event of any termination (but not expiration) of this Agreement, the following will apply:

13.3.1

Licenses.  As of the effective date of termination of this Agreement, except as expressly set forth in this Agreement, all licenses and all other rights granted by uniQure to Partner hereunder under the uniQure Technology (other than as set forth below) will terminate and all sublicenses granted by Partner pursuant to Section 2.2 (Sublicensing and Subcontractors) with respect to the Licensed Products will also terminate.  In addition, at uniQure’s election upon such termination, uniQure will have, and Partner hereby grants and agrees to grant to uniQure, effective upon such termination, a worldwide, non-exclusive, perpetual, irrevocable, and sublicensable (through multiple tiers) license to uniQure under all Product Marks and all Patent Rights and Know-How Controlled by Partner or any of its Affiliates as of the effective date of termination that (a) Cover (with respect to Patent Rights) and (b) are necessary to Exploit (with respect to Product Marks and Know-How) the Licensed Product in the form that it exists of such effective date of termination (as such product may be modified by uniQure after the date of such termination, the “Existing Product”), solely to the extent necessary for uniQure to Exploit such Licensed Product. The foregoing license grant will be (i) [*] if this Agreement is terminated by uniQure for cause pursuant to Section 13.2.2 (Termination for Cause) or, if terminated for any other reason, [*] (A) [*] or (B) [*] and (ii) subject to the same conditions on sublicensing set forth in Section 2.2 (Sublicensing and Subcontractors) and the same royalty provisions in Sections 8.3.3 to 8.13 (inclusive), to be fully memorialized by the Parties within a reasonable time after the above termination date.

13.3.2

Assignment of Agreements.  Partner will assign to uniQure in whole or in part as applicable any agreement with any Third Party to the extent such agreement is necessary for the Exploitation of the Existing Product, if permitted under such agreement (and will use reasonable efforts to seek any consent required from the applicable Third Party in connection with such an assignment, provided that Partner is not required to make any payments to such Third Party to procure such consent). If any such agreement (or portion thereof) cannot be assigned to uniQure, then upon uniQure’s reasonable request, either (i) to the extent permitted under such

13.3.3

Regulatory Submissions and Regulatory Approvals.  Partner will, and will cause its Affiliates and Sublicensees to, (a) no later than [*] after the effective date of termination of this Agreement, develop a plan for the assignment and transfer to uniQure or its designee all of Partner’s rights, title, and interests in and to all Regulatory Submissions, Regulatory Approvals and Reimbursement Approvals for the Existing Product then owned or Controlled by Partner or any of its Affiliates or Sublicensees, (b) complete assignment and transfer promptly in accordance with such plan, and (c) to the extent assignment pursuant to clause (a) is delayed or is not permitted by the applicable Regulatory Authority, permit uniQure to cross-reference and rely upon any Regulatory Submissions, Regulatory Approvals, and Reimbursement Approvals filed by Partner with respect to such Existing Product.  Partner will execute and deliver, or to cause to be executed and delivered, to uniQure or its designee such endorsements, assignments, commitments, acknowledgements, and other documents as may be necessary to assign, convey, transfer, and deliver to uniQure or its designee all of Partner’s or its applicable Affiliate’s or designee’s rights, title, and interests in and to all such assigned Regulatory Submissions, Regulatory Approvals, and Reimbursement Approvals to uniQure, including submitting to each applicable Regulatory Authority or other Governmental Authority a letter or other necessary documentation (with copy to uniQure) notifying such Regulatory Authority or other Governmental Authority of, or otherwise giving effect to, the transfer of ownership to uniQure of all such assigned Regulatory Submissions, Regulatory Approvals, and Reimbursement Approvals. In addition, upon uniQure’s written request, Partner will provide to uniQure copies of all material related documentation related to the Existing Product, including material non-clinical, preclinical, and clinical data related to the Existing Product that are held by or reasonably available to Partner or its Affiliates or Sublicensees.  The Parties will discuss and establish appropriate arrangements with respect to safety data exchange, including with respect to any amendments to the SDE Agreement.

13.3.4

Appointment as Exclusive Distributor.  If Partner is Commercializing the Existing Product in any country as of the effective date of termination, then, at uniQure’s election (in its sole discretion) on a country-by-country basis, until such time as all Regulatory Approvals and Reimbursement Approvals with respect to such Existing Product in such country have been assigned and transferred to uniQure or its designee, Partner will appoint uniQure or its designee as its exclusive distributor of the Existing Products in such country and grant uniQure or its designee the right to appoint sub-distributors, to the extent not prohibited by any written agreement between Partner or any of its Affiliates and a Third Party.

13.3.5

Assignment and Disclosure.  To the extent requested by uniQure, Partner will promptly upon such request:

(a)

assign and transfer to uniQure or its designee all of Partner’s rights, title, and interests in and to all clinical trial agreements (if any) and distribution agreements (to the extent assignable and not cancelled), confidentiality and other agreements; and provide copies of data and other Know-How (including commercial information) in Partner’s Control, in each case, to the extent related to the Existing Products and that are necessary for the Exploitation of the Existing Product;

(b)

assign to uniQure or its designee or amend to have uniQure assume Partner’s rights and obligations therein, as either option is deemed appropriate in Partner’s discretion, any agreements or arrangements with Third Party vendors (including distributors) with respect to the Existing Products or, to the extent any such Third Party agreement or arrangement is not assignable to uniQure for such scope, reasonably cooperate with uniQure to arrange for such distributor to continue to provide such services to Partner on uniQure’s behalf for a reasonable time after termination of this Agreement with respect to such Existing Products to facilitate the orderly transition of all Commercialization and other activities then being performed by or on behalf of Partner or its Affiliates or Sublicensees for the Existing Products to uniQure or its designee, provided that, if Partner is required to make any payments to any Third Party to procure any consents, Partner’s obligation to procure such consent is contingent on uniQure agreeing to bear 100% of any such payment;

(c)

disclose to uniQure or its designee all documents, records, and materials to the extent related to the Existing Products that are Controlled by Partner or its Affiliates or Sublicensees and are necessary for uniQure to exercise its above rights relating to such Existing Products, which documents, records, and materials, in each case, will be deemed Partner’s “Confidential Information” to the extent they also relate to Partner’s or its Affiliates’ other businesses or products and uniQure or its Affiliates and (sub)licensees may use the same to Exploit such Existing Products; and

(d)

assign and transfer to uniQure or its designee all of Partner’s rights, title, and interests in and to the copyright in any Promotional Materials that are solely related to the Existing Product (and provide a non-exclusive license to uniQure and its Affiliates and (sub)licensees of all Promotional Materials that are otherwise related to the Existing Products) and provide a copy of all training materials, medical education materials, packaging and labeling, and all other literature or other information that are related to the Existing Product, which Promotional Materials will be deemed Partner’s “Confidential Information” to the extent they also relate to Partner or its Affiliates’ other businesses or products and uniQure or its Affiliates and (sub)licensees may use the same to Exploit such Existing Products.

13.3.6

Regulatory Transfer Support.  In furtherance of the assignment of Regulatory Submissions, Regulatory Approvals, Reimbursement Approvals, and other documentation pursuant to Section 13.3.3 (Regulatory Submissions and Regulatory Approvals) and the other data described in Section 13.3.5 (Assignment and Disclosure), if and to the extent that such assignments have not been made within the [*] after the effective date of termination of this Agreement, Partner will appoint uniQure as Partner’s or its Affiliate’s agent for all Existing Product-related matters involving Regulatory Authorities until all Regulatory Submissions, Regulatory Approvals, Reimbursement Approvals, and the data described in Section 13.3.5 (Assignment and Disclosure) that are not then in uniQure’s or its Affiliate’s name have been assigned to uniQure or its designee.  In the event of failure to obtain such assignment, Partner hereby consents and grants to uniQure the right to access and reference (without any further action required on the part of Partner, whose authorization to file this consent with any Regulatory Authority is hereby granted) any such item.

13.3.7

Know-How Transfer Support.  In furtherance of the assignment of Know-How pursuant to Section 13.3.5 (Assignment and Disclosure), Partner will, for a period of [*] from the effective date of termination of this Agreement, provide such consultation or other assistance as uniQure may reasonably request to assist uniQure in becoming familiar with such Know-How in order for uniQure to undertake further Exploitation of the Existing Product, at uniQure’s cost and expense; provided that if the Agreement is terminated by Partner for any reason other than pursuant to Section 13.2.2 (Termination for Cause), then Partner will provide [*].

13.3.8

Inventory.  At uniQure’s election and request, Partner will transfer to uniQure or its designee some or all inventory of the Existing Product (including all final product, bulk drug substance, intermediates, works-in-process, formulation materials, reference standards, drug product clinical reserve samples, packaged retention samples, and the like) then in the possession or Control of Partner, its Affiliates or Sublicensees; provided that uniQure will pay Partner a price equal to [*].

13.3.9

Wind Down and Transition.  Partner will be responsible, at its own cost and expense (subject to Section 13.4 (Further Effects of Termination by Partner for Cause)), for the wind-down of Partner’s and its Affiliates’ and its Sublicensees’ activities with respect to the Existing Product.  Partner will, and will cause its Affiliates and Sublicensees to, reasonably cooperate with uniQure to facilitate orderly transition of all Development, Manufacturing, and Commercialization activities, and other activities, then being performed by or on behalf of Partner or its Affiliates or Sublicensees for the Existing Product to uniQure or its designee, including reasonably cooperating with uniQure to transfer all Development, Manufacturing, and Commercialization activities, and other activities, to uniQure or its designee and continuing to perform such activities on uniQure’s behalf for a reasonable time after termination of this Agreement with respect to such Existing Product until such transition is completed.

13.3.10

Return of Confidential Information.  At the Disclosing Party’s election, the Receiving Party will return (at Disclosing Party’s expense) or destroy all tangible materials comprising, bearing, or containing any Confidential Information of the Disclosing Party relating to the Existing Product that are in the Receiving Party’s or its Affiliates’ or Sublicensees’ possession or control and provide written certification of such destruction (except to the extent any information is the Confidential Information of both Parties or to the extent that the Receiving Party has the continuing right to use the Confidential Information under this Agreement); provided that the Receiving Party may retain one copy of such Confidential Information for its legal archives.  Notwithstanding any provision to the contrary set forth in this Agreement, the Receiving Party will not be required to destroy electronic files containing such Confidential Information that are made in the ordinary course of its or its Sublicensees’ business information back-up procedures pursuant to its electronic record retention and destruction practices that apply to its or their own general electronic files and information.

13.3.11

Further Assistance.  Partner will provide any other assistance or take any other actions, in each case, reasonably requested by uniQure, as necessary to transfer to uniQure all Exploitation of the Existing Product, and will execute all documents as may be reasonably requested by uniQure in order to give effect to this Section 13.3 (Effect of Termination other than by Partner for Cause).

13.4

Further Effects of Termination by Partner for Cause. Notwithstanding any provision to the contrary in this Article 13 (Term and Termination), if Partner terminates this Agreement pursuant to Section 13.2.2 (Termination for Cause), then uniQure will bear its

13.5

Survival.  Expiration or termination of this Agreement will not relieve the Parties of any obligation accruing prior to such expiration or termination.  Without limiting the foregoing, the following provisions of this Agreement will survive the expiration or termination of this Agreement: Article 1 (Definitions), Section 2.3 (License Grants to uniQure), Section 3.2.3 (Reimbursement of Costs and Expenses) (with respect to amounts becoming due during the Term), Section 3.3.2 (Reimbursement of Costs and Expenses) (with respect to amounts becoming due during the Term), Section 3.5.3 (Cost) (with respect to amounts becoming due during the Term), Section 4.4.4 (Allocation of Costs) (with respect to amounts becoming due during the Term), Section 5.2 (Manufacturing Development Plan) (with respect to amounts becoming due during the Term), Section 5.4 (Transfer of Manufacturing Know-How) (with respect to amounts becoming due during the Term), Section 8.3.3 (Royalty Payments and Reports) (with respect to payments becoming due during the Term), Section 8.4 (Development Payment) (with respect to the Development Payment accrued prior to the Outside Date and due after the termination of this Agreement in accordance with Section 15.5), Section 8.5 (Other Amounts Payable) (with respect to amounts becoming due during the Term), Section 8.9 (Currency; Exchange Rate) (with respect to amounts becoming due during the Term), Section 8.10 (Blocked Payments) (with respect to amounts becoming due during the Term), Section 8.11 (Late Payments) (with respect to amounts becoming due during the Term), Section 8.12 (Financial Records and Audits), Section 9.1 (Duty of Confidence), Section 9.2 (Confidential Information), Section 9.3 (Exemptions), Section 9.4 (Authorized Disclosures), Section 9.6 (Publications), Section 9.7 (Publicity; Use of Names), Section 9.8 (Attorney-Client Privilege), Section 9.9 (Personal Information), Section 10.5 (No Other Warranties), Section 10.8 (Limitation on Claims), Article 11 (Indemnification), Section 12.1.1 (Ownership), Section 12.2 (Practice Under and Other Use of Joint Technology), Section 12.4.3 (Joint Patent Rights), Section 12.6.2 (Defense), Section 12.9 (Cooperation), Section 12.10 (Privilege), Section 13.1 (Term), Section 13.3 (Effect of Termination), Section 13.4 (Further Effects of Termination by Partner for Cause), Section 13.5 (Survival), Section 13.6 (Termination Not Sole Remedy), Article 14 (Dispute Resolution), Section 15.2 (Coordination and Cooperation) (with respect to amounts becoming due during the Term), Section 15.5 (Outside Date) (with respect to amounts becoming due thereunder), and Article 16 (Miscellaneous).

13.6

Termination Not Sole Remedy.  Termination is not the sole remedy under this Agreement and, whether or not termination is effected and notwithstanding anything to the contrary set forth in this Agreement, all other remedies will remain available except as expressly set forth herein.

14.1

Pre-Arbitration Negotiation.  Except in relation to any arbitration referred to this Article 14 (Dispute Resolution) under Section 8.2.4 (Payment Adjustment for [*]), Section 13.2.2(b)(ii) (CRE Explanation) or Section 13.2.2(c) (Payment Adjustment in Lieu of Termination for Third Party Competitive Product), prior to the commencement of any arbitration hereunder, the Parties, through their respective Executive Officers, will attempt to resolve any dispute for a period of [*].

14.2

Arbitration.  Except as specifically provided for within this Article 14 (Dispute Resolution), all disputes arising out of or in connection with this Agreement, other than any dispute subject to the provisions of Section 7.5 (Resolution of JSC Disputes), shall be finally settled under the Rules of Arbitration of the International Chamber of Commerce (“ICC”) by three arbitrators, provided that, other than with respect to the arbitration referenced in Section 13.2.3(b) (Termination for Patent Challenge), any dispute as to the scope, validity, enforceability, or infringement of any Patent Rights or trademark rights shall be finally resolved by a court of competent jurisdiction in the country or region in which such Patent Rights or trademark rights were granted or arose.

14.3

Arbitrator Selection.  The claimant(s) shall nominate one arbitrator in the request for arbitration.  The respondent(s) shall nominate one arbitrator in the answer to the request.  The two party-nominated arbitrators shall then have [*] to agree, in consultation with the parties to the arbitration, upon the nomination of a third arbitrator to act as president of the tribunal, barring which the ICC Court shall select the third arbitrator (or any arbitrator that claimant(s) or respondent(s) shall fail to nominate in accordance with the foregoing).  Each arbitrator shall be experienced in ICC arbitration and in the resolution of disputes concerning research, development and commercialization collaborations in the pharmaceutical industry.

14.4

Place and Language of Arbitration.  The place of arbitration shall be New York, New York.  The language of the arbitration shall be English.

14.5

Costs of the Arbitration.  The parties to any arbitration conducted pursuant to this Article 14 (Dispute Resolution) shall each bear their own share of the costs of the arbitration and their own attorneys’ fees and other advisor, consultant, witness or expert fees and costs.

14.6

Expedited Arbitration.  In respect of any arbitration commenced under Section 14.2 (Arbitration), any party to such arbitration may elect that the arbitration proceed under the ICC’s Expedited Procedure Rules, irrespective of the amount in dispute, in which event such rules shall apply.

14.7

Specified Expedited Arbitrations.  Any dispute with respect to Milestone Payments or Royalty Rates in connection with the renegotiation thereof under Section 8.2.4 (Payment Adjustment for [*]) or Section 13.2.2(c) (Payment Adjustment in Lieu of Termination for Third Party Competitive Product) or any dispute with respect to the allocation of the Regulatory Milestone Payment relating to the [*] milestone under Section 8.2.5(b)

14.8

Injunctive Relief.  Notwithstanding any provision to the contrary set forth in this Agreement, in the event of an actual or threatened breach hereunder, the aggrieved Party may seek equitable relief (including restraining orders, specific performance or other injunctive relief) in any court or other forum, without first submitting to the dispute resolution procedures set forth in Section 14.1 (Pre-Arbitration Negotiation).

14.9

Confidentiality.  Any and all activities conducted under this Article 14 (Dispute Resolution), including any and all non-public proceedings and decisions under Section 14.2 (Arbitration) or Section 14.7 (Specified Expedited Arbitrations), will be the Confidential Information of each of the Parties, and will be subject to the terms of Article 9 (Confidentiality; Publication).

14.10

Tolling.  The Parties agree that all applicable statutes of limitation and time-based defenses (such as estoppel and laches) will be tolled once the dispute resolution procedures set forth in this Article 14 (Dispute Resolution) have been initiated and for so long as they are pending.

15.1

Effective Date.  Except for Partner’s obligations under Section 8.4 (Development Payment), and the Parties’ rights and obligations under Section 2.6 (Exclusivity Covenant), Article 9 (Confidentiality; Publication), Article 10 (Representations, Warranties and Covenants) (except Section 10.7 (Compliance with Laws) and Section 10.8 (Limitation on Claims)) and this Article 15 (Effectiveness), which will be effective as of the Execution Date, this Agreement will not become effective until the first Business Day after the Antitrust Clearance Date (the “Effective Date”); provided that the Effective Date will not occur (i) if either Party exercises its termination right under Section 15.5 (Outside Date) or (ii) if and for so long as there is in force any Applicable Law enjoining or prohibiting the consummation of the transactions contemplated by this Agreement in the U.S., United Kingdom, or Australia, or an action or proceeding brought by a Governmental Authority is pending that would reasonably be expected to lead to such an injunction or prohibition.

15.2

Antitrust Filings.  The Parties will use reasonable best efforts to file the Antitrust Filings with the Antitrust Agencies as promptly as reasonably practicable and advisable. [*]

15.3

Coordination and Cooperation.  Subject to reasonable confidentiality protections, each Party will furnish to the other Party such information and assistance as such other Party may reasonably request in connection with any Antitrust Filings and will reasonably cooperate with the other Party in the preparation and execution of all documents and materials that are to be submitted to the Antitrust Authorities in connection with the Antitrust Filings.  Notwithstanding anything herein to the contrary, if the Parties disagree upon any proposed timing, strategy, communication, or activities necessary to obtain any clearance, expiry of applicable waiting period, or waiver of jurisdiction required under any Antitrust Laws for the consummation of this Agreement and the transactions contemplated hereby, the Parties agree to work together in good faith to resolve the disagreement in a mutually acceptable manner.  The Parties will, and will instruct their respective counsel to, cooperate with each other and use reasonable best efforts to facilitate and expedite the identification and resolution of any issues arising under any Antitrust Laws at the earliest practicable dates.  Such reasonable best efforts and cooperation include counsel’s undertaking (a) to keep each other appropriately informed of communications from and to personnel of the reviewing Governmental Authorities, and (b) to confer with each other regarding appropriate contacts with and response to personnel of such Governmental Authorities and the content of any such contacts or presentations.  Neither uniQure nor Partner will participate in any meeting or discussion with any Governmental Authority with respect of any Antitrust Filings, investigation, or other inquiry without giving the other party prior notice of the meeting or discussion and, to the extent permitted by the relevant Antitrust Authority, the opportunity to attend and participate in such meeting or discussion (which, at the request of either uniQure or Partner, will be limited to outside antitrust counsel only).  Subject to Section 15.2 (Antitrust Filing) and this Section 15.3 (Coordination and Cooperation), uniQure and Partner will each approve the content of any presentations, white papers or other written materials to be submitted to any Governmental Authority with respect to any Antitrust Filing in advance of any such submission; provided that (i) information reasonably deemed to be competitively sensitive may be restricted to

15.4

Efforts.  The Parties will each use reasonable best efforts to ensure that any applicable waiting period under the applicable Antitrust Law with respect to the Antitrust Filings expires or is terminated as soon as practicable or to obtain any necessary approvals or consents under such applicable Antitrust Law, at the earliest possible date after the date of the Antitrust Filings; provided, that nothing in this Section 15.4 (Efforts) or otherwise will require Partner or any of its Affiliates to, and uniQure and its Affiliates will not without the prior written consent of Partner, take or agree to any action with respect to Partner or any of its Affiliates, or the Licensed Product, including selling, divesting, or otherwise disposing of, holding separate or taking or committing to take any action that limits in any material respect Partner’s freedom of action with respect to, or its ability to retain, any business, products, rights, services, assets, or other properties of Partner or any of its Affiliates, or the Licensed Product, or any interest therein.  Notwithstanding the foregoing (i) the Parties shall use reasonable best efforts to answer, address, respond to, or rebut any and all substantive concerns, questions, and preliminary objections raised by the U.S. Department of Justice, the FTC, or any other Antitrust Agency that would otherwise prevent, impede or delay the consummation of this Agreement, and (ii) if the U.S. Department of Justice or the FTC has authorized a complaint, another Antitrust Agency has adopted a final decision, or a Court has adopted a final judgment that would prevent, impede or delay the consummation of this Agreement, nothing in this Section 15.4 (Efforts) or otherwise will require Partner or any of its Affiliates to, and uniQure and its Affiliates will not without the prior written consent of Partner, take any action to resolve any such objection, action, suit, or proceeding so as to permit consummation of this Agreement.

15.5

Outside Date.  Prior to the Effective Date, either Party may terminate this Agreement with immediate effect upon written notice to the other Party (a) if any Antitrust Agency or court of appropriate jurisdiction prohibits, opposes or permanently enjoins the transactions contemplated by this Agreement, or (b) in the event that the Antitrust Clearance Date does not occur on or prior to [*] (the “Outside Date”), provided that prior to the Outside Date the Parties may agree to extend the Outside Date to a later date (whereupon the “Outside Date” shall be deemed to be such agreed later date).  If either Party elects to terminate this Agreement in accordance with the foregoing clause (a) or (b), then no later than [*] after the other Party’s receipt of written notice of such termination, Partner will pay to uniQure the Development Payment by wire transfer of immediately available funds to an account specified in writing by uniQure, to the extent the Development Payment has accrued pursuant to Section 8.4 (Development Payment).  If (i) the Antitrust Clearance Date does not occur on or prior to the Outside Date (other than as a result of an event specified in foregoing clause (a)), (ii) prior to the Outside Date Partner requests an extension of the Outside Date of no longer than [*], uniQure does not agree to such extension, and this Agreement is terminated pursuant to this Section 15.5 (Outside Date), and (iii) prior to, on or within [*] after the Outside Date, uniQure or any of its Affiliates consummates, enters into any definitive agreement with respect to, or recommends to its shareholders to vote in favor of or to accept an offer with respect to, an Alternative Transaction, then no later than [*] after written demand by Partner, uniQure will pay to Partner, by wire transfer of immediately available funds to an account specified in writing by Partner, the amount equal

16.1

Assignment.  Except as otherwise expressly provided herein, this Agreement may not be assigned or otherwise transferred, nor may any right or obligation hereunder be assigned or transferred, by either Party without the prior written consent of the other Party.  Notwithstanding any provision to the contrary set forth in this Agreement, (a) uniQure may assign its rights to receive payments under this Agreement to one or more Persons without consent of Partner (including as part of a royalty factoring transaction), and (b) either Party may, without consent of the other Party, assign this Agreement and its rights and obligations hereunder (i), in whole or in part, to an Affiliate of such Party, or (ii) in whole to its successor-in-interest in connection with the sale, transfer, succession, or reorganization of all or substantially all of its assets, whether in a merger, acquisition, or similar transaction or series of related transactions; provided that in the case of the foregoing clauses (i) or (ii), the assigning Party provides written notice of such assignment to the non-assigning Party within [*] after the effective date of such assignment, provided, further that the assignee agrees in writing to assume all of the assigning Party’s obligations under this Agreement that are being assigned.  If uniQure or any of its Affiliates sells, transfers or exclusively licenses substantially all of the uniQure Technology to any other Person pursuant to the foregoing clause (ii), (x) uniQure shall promptly notify Partner in writing, (y) such Person must assume in writing (and is otherwise deemed to assume automatically) all of uniQure and its Affiliates’ obligations herein with respect to such uniQure Technology, and (z) at Partner’s request within [*] after such notification, uniQure will cause such Person to execute a direct license to Partner with the same or substantially the same applicable terms herein. Any attempted assignment of this Agreement or other transaction not in accordance with this Section 16.1 (Assignment) will be null, void, and of no legal effect.  The terms of this Agreement will be binding upon, and will inure to the benefit of, the Parties and their respected successors and permitted assigns.

16.2

LIMITATION OF LIABILITY.  NEITHER PARTY WILL BE LIABLE TO THE OTHER FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR INDIRECT DAMAGES ARISING FROM OR RELATING TO ANY BREACH OF THIS AGREEMENT, OR DAMAGES FOR LOSS OF PROFIT IN CONNECTION WITH THIS AGREEMENT, IN EACH CASE, REGARDLESS OF ANY NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.  NOTWITHSTANDING THE FOREGOING, NOTHING IN THIS SECTION 16.2 (LIMITATION OF LIABILITY) IS INTENDED TO OR WILL LIMIT OR RESTRICT THE INDEMNIFICATION RIGHTS OR OBLIGATIONS OF ANY PARTY UNDER SECTION 11.1 (INDEMNIFICATION; BY PARTNER) OR SECTION 11.2 (INDEMNIFICATION; BY UNIQURE), OR DAMAGES AVAILABLE TO A PARTY FOR THE OTHER PARTY’S (I) MISAPPROPRIATION OR INFRINGEMENT OF INTELLECTUAL PROPERTY OWNED OR CONTROLLED BY SUCH PARTY, (II) BREACH OF ITS OBLIGATIONS UNDER SECTION 2.6 (EXCLUSIVITY COVENANT), (III) BREACH OF THE LICENSES GRANTED TO THE OTHER PARTY UNDER THIS

16.3

Section 365(n) of the Bankruptcy Code. All rights and licenses granted under or pursuant to this Agreement by a Party to the other, including those set forth in Section 2.1 (License Grants to Partner, Licensed Products and AAV5 NAb Assay) and Section 2.3 (License Grant to uniQure), are and will otherwise be deemed to be, for purposes of Section 365(n) of the U.S. Bankruptcy Code or any foreign counterpart thereto, licenses of right to “intellectual property” as defined under Section 101 of the U.S. Bankruptcy Code or any foreign counterpart thereto. The Parties agree that the Parties will retain and may fully exercise all of their rights and elections under the U.S. Bankruptcy Code and any foreign counterpart thereto. All payments to be made by Partner under this Agreement, including the Upfront Payment, Milestone Payments and Royalties, will be considered “royalties” for purposes of Section 365(n) of the U.S. Bankruptcy Code and any applicable foreign counterpart thereto.

16.4

Severability.  If any one or more of the provisions contained in this Agreement is held invalid, illegal or unenforceable in any respect, the validity, legality, and enforceability of the remaining provisions contained herein will not in any way be affected or impaired thereby, unless the absence of the invalidated provisions adversely affects the substantive rights of the Parties.  The Parties will in such an instance use their best efforts to replace the invalid, illegal, or unenforceable provisions with valid, legal, and enforceable provisions that, insofar as practical, implement the purposes of this Agreement.

16.5

Notices.  All notices that are required or permitted hereunder will be in writing, will specifically refer to this Agreement, will be addressed to the appropriate Party at the address specified below or such other address as may be specified by such Party in writing in accordance with this Section 16.5 (Notices) (with a courtesy copy sent by email, which will not constitute notice), and will be deemed to have been given for all purposes (a) when received, if hand-delivered, (b) [*] after being dispatched through a reputable courier service, or (c) [*] after mailing, if mailed by first class certified or registered airmail, postage prepaid, return receipt requested.

16.6

Governing Law.  This Agreement, and all claims or causes of action (whether in contract, tort or statute) that may be based upon, arise out of or relate to this Agreement, or the negotiation, execution or performance of this Agreement or the breach thereof (including any claim or cause of action based upon, arising out of or related to any representation or warranty made in or in connection with this Agreement or as an inducement to enter into this Agreement), will be governed by, and enforced in accordance with, the internal laws of the State of New York, including its statutes of limitations without giving effect to the conflicts of law provisions thereunder.

16.7

Force Majeure.  Neither Party will be held liable to the other Party nor be deemed to have defaulted under or breached this Agreement for failure or delay in achieving any objective, satisfying any condition, or performing any obligation under this Agreement to the extent that such failure or delay is caused by or results from acts or events beyond the reasonable control of such Party, including acts of God, embargoes, war, acts of war (whether war be declared or not), terrorism, insurrections, riots, civil commotions, strikes, lockouts, or other labor disturbances (other than strikes, lockouts, or labor disturbances involving a Party’s own employees), government actions, fire, earthquakes, floods, epidemics, pandemics, the spread of infectious diseases, quarantines, and the COVID-19 pandemic (notwithstanding that the COVID-19 pandemic and related government orders are ongoing as of the Execution Date, so long as its effects are not reasonably foreseeable as of the Execution Date) (“Force Majeure”).  The affected Party will notify the other Party in writing of any Force Majeure circumstances that may affect its performance under this Agreement as soon as reasonably practicable, will provide a good faith estimate of the period for which its failure or delay in performance under the Agreement is expected to continue based on currently available information, and will undertake reasonable efforts necessary to mitigate and overcome such Force Majeure circumstances and resume normal performance of its

16.8

Entire Agreement; Amendments.  This Agreement, together with the Schedules hereto and the other agreements executed by the Parties and their respective Affiliates in connection herewith (including the Supply Agreement), contains the entire understanding of the Parties with respect to the subject matter hereof.  Any other express or implied agreements and understandings, negotiations, writings and commitments, either oral or written, in respect to the subject matter hereof (including the collaboration and the licenses granted hereunder) are superseded by the terms of this Agreement.  The Schedules to this Agreement are incorporated herein by reference and will be deemed a part of this Agreement.  This Agreement may be amended, or any term hereof modified, only by a written instrument duly executed by authorized representatives of each Party.  The foregoing will not be interpreted as a waiver of any remedies available to either Party or its Affiliates as a result of any breach, prior to the Effective Date, by the other Party or its Affiliates of such Party’s or its Affiliate’s obligations pursuant to the Confidential Disclosure Agreement.

16.9

Headings.  The captions to the several Articles, Sections, and subsections hereof are not a part of this Agreement but are merely for convenience to assist in locating and reading the several Articles, Sections and subsections of this Agreement.

16.10

Independent Contractors.  It is expressly agreed that uniQure and Partner will be independent contractors and that the relationship between the two Parties will not constitute a partnership, joint venture or agency.  Neither uniQure nor Partner will have the authority to make any statements, representations, or commitments of any kind, or to take any action that is binding on the other Party without the prior written consent of the other Party.

16.11

Performance by Affiliates.  Notwithstanding any provision to the contrary set forth in this Agreement, each Party will have the right to perform any or all of its obligations and exercise any or all of its rights under this Agreement through any Affiliate, provided that such Party will be and remain responsible and liable for the performance of such obligations.  Each Party hereby guarantees the performance by any Affiliates of such Party’s obligations under this Agreement and will cause any such performing Affiliates to comply with the provisions of this Agreement in connection with such performance.