EXHIBIT 10.10
SOFTWARE LICENSE AGREEMENT--METERWORKS
(SOURCE CODE)
This Agreement is entered into this 31st day of August, 2002 (the
"Effective Date") by and between Hifn, Inc., a Delaware corporation with
principal offices at ▇▇▇ ▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇
("Licensor") and ▇▇▇▇▇▇▇ Technology Development, L.L.C., a Delaware limited
liability company with principal offices at ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇, ▇▇▇▇▇ ▇▇▇,
▇▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ ("Licensee").
RECITALS
WHEREAS, Licensor desires to grant to Licensee, and Licensee desires to
receive from Licensor, a non-exclusive license to incorporate Licensor's
proprietary Licensed Software (as hereinafter defined) known as MeterWorks into
Licensee Products (as hereinafter defined) and to distribute the Licensed
Software, in object code format only, with Licensee's Products in accordance
with the terms of this Agreement.
NOW, THEREFORE, in consideration of the foregoing and the mutual
covenants contained herein, the parties agree as follows:
1. DEFINITIONS
For purposes of this Agreement the following terms shall have the
meanings set forth below:
1.1 Authorized Location. "Authorized Location" means any location or
locations of Licensee's office or offices, now or hereafter in existence from
time to time.
1.2 Derivative Works. "Derivative Works" means any software programs,
and copies thereof, which are developed by Licensee and which are based on or
incorporate any part of the Licensed Software delivered by Licensor hereunder,
including without limitation any revision, modification, translation (including
compilation or recapitulation by computer), abridgment, condensation, expansion,
or any other form in which the Licensed Software may be recast, transformed or
adapted, and that, if prepared without Licensor's authorization, would
constitute a copyright or trade secret infringement of the Licensed Software.
1.3 Licensed Software. "Licensed Software" means Licensor's proprietary
Source Code software (marketed by Licensor under the tradename MeterWorks), as
more fully described on Schedule A attached to this Agreement, including any
updates, improvements or modifications hereinafter furnished to Licensee by
Licensor in connection with the Licensed Software, whether requested by Licensee
or initiated by Licensor.
1.4 Licensee. "Licensee" means ▇▇▇▇▇▇▇ Technology Development, L.L.C.
and any subsidiary, parent or other affiliated entity of ▇▇▇▇▇▇▇ Technology
Development, L.L.C.
1.5 Licensee Products. "Licensee Products" means those Licensee
products which incorporate the Licensed Software and which are further described
on Schedule B attached to this Agreement, as it may be amended from time to time
by mutual agreement of the parties.
Licensee may add products which are substantially similar or within the existing
product family, to the products listed on Schedule B without Licensor's consent
as long as there is no change in control of Licensee.
1.6 Licensor Documentation. "Licensor Documentation" means all written
or electronic technical documentation furnished by Licensor during the term of
this Agreement that relates to the Licensed Software, including without
limitation any and all algorithms, listings, flow charts, operation instructions
and other documentation.
1.7 Object Code. "Object Code" means the Licensed Software supplied by
Licensor to Licensee hereunder, or Derivative Works developed by Licensee
hereunder, in machine-readable, compiled object code form.
1.8 Revenue. "Revenue" shall mean the gross amount actually received by
or accrued to Licensee less sales taxes and customs duties and refunds for
returns actually paid by Licensee from such amounts and bad debt written off as
uncollectable (unless later collected) for (i) sale, distribution, or use of a
Licensee Product; or (ii) the provision of products based in any part upon or
using a Licensee Product.
1.9 Software Upgrades. "Software Upgrades" means new versions of the
Licensed Software developed by Licensor that provide substantial new
functionality or performance in addition to the features provided by the version
of the Licensed Software described on Schedule A.
1.10 Source Code. "Source Code" means the computer source code for the
Licensed Software supplied by Licensor to Licensee hereunder, including any
updates, improvements, or modifications hereinafter furnished to Licensee by
Licensor in connection with the Source Code, whether requested by Licensee or
initiated by Licensor.
1.11 Source Materials. "Source Materials" means:
(a) the computer source code for the Licensed Software
supplied by Licensor to Licensee hereunder, including source code
Modifications containing Licensor's confidential information in human
perceivable form; and
(b) all other human perceivable or readily reverse engineered
descriptions and implementations of the Licensed Software or portion
thereof.
1.12 Nonconformance. "Nonconformance" means any material discrepancy
between the functionality of the Binary Version and the functionality described
in the RFCs 1757, 1513, 2021 and 2074. Conformance to RFCs 1757, 1513, 2021 and
2074 shall be the joint responsibility of Licensor and Licensee.
1.13 ▇▇▇ ▇▇▇▇. "RFC 1757" means the document identified as Request for
Comments 1757, Remote Network Monitoring Management Information Base, as
published by the Internet Engineering Task Force, March 1995.
1.14 ▇▇▇ ▇▇▇▇. "RFC 1513" means the document identified as Request for
Comments, 1513 Token Ring Extensions to the Remote Network Monitoring MIB, as
published by the Internet Engineering Task Force, September 1993.
2
1.15 ▇▇▇ ▇▇▇▇. "RFC 2021" means the document identified as Request for
Comments, 2021 Remote Network Monitoring Information Base version 2, dated
January 1997.
1.16 ▇▇▇ ▇▇▇▇. "RFC 2074" means the document identified as Request for
Comments, 2074 Remote Network Monitoring MIB Protocol Directory, dated January
1997.
2. LICENSE GRANT
2.1 Modification License. Subject to the terms and conditions of this
Agreement, Licensor hereby grants to Licensee, under all of Licensor's
intellectual property rights in and to the Licensed Software, a non-exclusive,
non-transferable (except as provided in Section 11.1, below), worldwide license,
without right to sublicense, of the Licensed Software, the Licensed
Documentation, and the Source Code and the Source Materials, with rights to use,
modify, reproduce and prepare Derivative Works of the Source Code and the
Licensor Documentation solely at the Authorized Location for the purpose of
creating, maintaining and enhancing the Licensee Products. The parties
acknowledge and agree that the Licensed Software, in Object Code, or Derivative
Works form can be embedded in products offered for sale or license (with rights
to sublicense) by Licensee ("Licensee Products") and notwithstanding anything to
the contrary contained in this Agreement and notwithstanding any restrictive
language set forth in Section 2.2 or Section 2.3 below, Licensee shall have the
express right to sell and/or license Licensee Products containing the Object
Code or Derivative Works form of the Licensed Software to third parties; such
activity shall:
(a) not be deemed to violate any restrictions contained herein
with respect to sublicensing of the Object Code of the Licensed
Software;
(b) survive the termination of this Agreement (except in the
case of a Breach by Licensee under Section 8.1); and
(c) not create any further liability or obligations of
Licensee to Licensor.
2.2 Object Code Reproduction License. Subject to the terms and
conditions of this Agreement, Licensor hereby grants to Licensee, under all of
Licensor's intellectual property rights in and to the Licensed Software, a
non-exclusive, non-transferable (except as provided in Section 11.1 below)
license to reproduce, in Object Code format only, the Licensed Software and/or
Derivative Works as part of the Licensee Products. Licensee shall make no use of
any copies of the Licensed Software and/or Derivative Works reproduced pursuant
to this Section 2.2 except as provided by the distribution license set forth in
Section 2.3 below. Licensee shall be permitted to sublicense the reproduction
rights granted under this Section 2.2 to third parties.
2.3 Distribution License. Subject to the terms and conditions of this
Agreement, Licensor hereby grants to Licensee, under all of Licensor's
intellectual property rights in and to the Licensed Software, a worldwide,
non-exclusive, non-transferable (except as provided in Section 11.1 below)
license to distribute copies, in Object Code format only, of the Licensed
Software and/or Derivative Works only as incorporated into the Licensee
Products. Except as expressly provided in Section 2.4 below, Licensee shall have
no right to sublicense the rights granted under this Section 2.3 by Licensor.
Licensee shall not distribute or market the Licensed Software and/or Derivative
Works in any manner except as expressly provided in this Section 2.3.
3
2.4 Sublicensing of Licensed Software by Licensee.
2.4.1 Restrictions. Each Licensee Product shall be distributed by
Licensee or its distributors with a license, which applies to the Licensed
Software and/or Derivative Works and which shall contain terms that are at least
as protective of Licensor's rights as are the terms set forth on Schedule C
attached to this Agreement. Licensor shall provide Licensee with a copy of such
license and any subsequent versions thereof for its use in licensing the
Licensed Software and/or Derivative Works.
2.4.2 Warranties & Indemnity. Licensee shall be solely
responsible for, and Licensor shall have no obligation to honor, any
representations or warranties that Licensee provides with respect to the
Licensee Products. Licensee shall be solely responsible for, and Licensor shall
have no obligation to honor, any warranties that Licensee provides to its
customers with respect to the Licensed Software, Derivative Works or Licensee
Products. Licensee shall defend any claim against Licensor arising in connection
with any such warranties to Licensee's customers, express, implied, statutory,
or otherwise, and shall pay any settlements or damages awarded to Licensor that
are based on any such warranty.
2.4.3 Infringements. Licensee agrees to use reasonable commercial
efforts to enforce violations or infringements under any sublicense agreements
for the Licensed Software and/or Derivative Works and to inform Licensor
promptly of any known violation, infringement or breach.
2.5 Rights in Licensee Products and Derivative Products. The Derivative
Works, the Licensee Products and any enhancements or improvements created by
Licensee by embedding Licensor's intellectual property rights in such Products
shall constitute the sole and exclusive property of Licensee.
2.6 Documentation. Licensee shall be responsible for preparing end-user
documentation for Licensee Products that incorporate the Licensed Software
and/or Derivative Works. For such purpose, Licensor hereby grants to Licensee a
non-exclusive, non transferable license (except as provided in Section 11.1) to
modify and create derivative works of those portions of the Licensor
Documentation that are not labeled "Licensor Confidential," proprietary or by a
similar term and are designated by Licensor as usable for such purpose.
Appropriate credits shall be given to Licensor in such documentation.
Licensor agrees that during the term of this Agreement it shall make
available for review by Licensee and Licensee's designated representatives,
subject to appropriate confidentiality agreements, if any reasonably required by
Licensor, copies of all Licensor Documentation, Source Materials and Source
Code.
2.7 Proprietary Notices. Licensee agrees that each copy of the Licensed
Software, Derivative Works and Documentation, and all packaging-related medium
used for their distribution, shall include reproductions of the copyright
notices and other proprietary legends of Licensor, in computer Object Code
format or otherwise, which accompany such items. Licensee shall not remove,
efface or obscure any copyright notices or other proprietary notices or legends
from any Licensor materials provided hereunder.
2.8 Ownership; Derivative Works. Licensor shall retain all right, title
and interest, including all intellectual property rights, in and to the Licensed
Software and Licensor
4
Documentation. The Licensee shall own all Derivative Works created solely by the
Licensee to the extent that such ownership by Licensee of the Derivative Works
shall not effect, abridge, encumber, diminish, or otherwise impair the
intellectual and any other property rights of Licensor in and to the Licensed
Software.
2.9 Upgrades and Enhancements to Source Code. If Licensee elects to
obtain upgrades and enhancements to the Source Code, Licensor shall promptly
provide Licensee with any upgrades, modifications, revisions or enhancements to
the Source Code (the "Upgrade Services"). In such event, Licensee shall pay
Licensor an annual upgrade fee equal to $15,000, payable 90 days after execution
of this Agreement (the "Upgrade Fee"), and on each anniversary date of such
ninetieth day thereafter. The $15,000 Upgrade Fee is the total annual fee for
Upgrades hereunder and under the MeterFlow Agreement. The Upgrade Services, and
Licensee's obligation to pay the Upgrade Fee, may be discontinued by Licensee at
any time by written notice to Licensor.
3. LICENSE FEES AND ROYALTIES
As consideration for the licenses granted by Licensor to Licensee
pursuant to Section 2 above, Licensee agrees to pay license fees and royalties
to Licensor pursuant to the payment plan set forth on Schedule D attached to
this Agreement.
4. [INTENTIONALLY DELETED]
5. WARRANTIES, MAINTENANCE AND UPGRADES
5.1 Ownership Warranty. Licensor warrants that it is the owner of the
Licensed Software and the Licensor Documentation and that it has the right to
grant the licenses described in Section 2 above.
5.2 Limited Warranty. Licensor warrants that for a period of one year
following delivery to Licensee, the Licensed Software ("Initial Warranty
Period") will perform substantially in accordance with the specifications set
forth on Schedule A. Licensor does not warrant that the Licensed Software will
be error-free or will operate without interruption. Licensee's exclusive remedy
for breach of the warranty contained in this Section 5.2 shall be to notify
Licensor of the problem in which event Licensor shall use all reasonable efforts
to correct such problem. If Licensor, after reasonable efforts, is unable to
remedy any material failure of the Licensed Software to perform in accordance
with these specifications, Licensee may terminate this Agreement and shall have
no further obligations hereunder. Licensor makes no warranty with respect to the
Derivative Works.
5.3 Maintenance. Licensor shall provide Licensee with maintenance for
the Licensed Software in accordance with the terms of Schedule E attached to
this Agreement (the "Maintenance Services"). The fee for the Maintenance
Services shall be $15,000 per year, with the initial fee due and payable upon
expiration of the Initial Warranty Period set forth in Section 5.2 and covering
the period ending one year after expiration of the Initial Warranty Period.
Thereafter, the Licensee may, but shall not be obligated to, continue the
Maintenance Services, in its discretion, by payment of a $15,000 Maintenance Fee
for each year thereafter. The $15,000 Maintenance Fee is the total annual
Maintenance Fee hereunder and under the MeterFlow Agreement.
5
5.4 End User Support. Licensee shall, at its own expense, be solely
responsible for providing technical support and training to its customers for
Licensee Products. Licensee shall be solely responsible for, and Licensor shall
have no obligation to honor, any warranties that Licensee provides to its
customers with respect to the Licensed Software. Licensee shall defend any claim
against Licensor arising in connection with any such warranties to Licensee's
customers, express, implied, statutory, or otherwise, and shall pay any
settlements or damages awarded to Licensor that are based on any such warranty
5.5 Product Functionality. Licensor warrants that for a period of one
(1) year from the receipt of the Licensed Software (as defined in Schedule A),
the Source Code version will contain no Non-Conformances. During the Initial
Warranty Period, if Licensee notifies Licensor of a Non-Conformance, Licensor,
at its own expense, shall bring the Source Code version into substantial
conformance with the appropriate RFC's as outlined in Schedule G of this
Agreement. As set forth in Section 5.3, above, Licensor will support the
Licensed Software in conjunction with the support and maintenance services set
forth in Schedule E provided that the Licensee pays for such services after
expiration of the Initial Warranty Period as outlined in Schedule E and Section
5.3 above.
5.6 Licensor Warranty Disclaimer. EXCEPT AS SET FORTH IN THIS SECTION
5, LICENSOR HEREBY DISCLAIMS ALL WARRANTIES TO LICENSEE OR ITS CUSTOMERS,
EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, WITH RESPECT TO THE LICENSED SOFTWARE
OR DERIVATIVE WORKS, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE EXPRESS LIMITED
WARRANTY STATED ABOVE IS IN LIEU OF ALL LIABILITIES OR OBLIGATIONS OF LICENSOR
FOR DAMAGES INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OCCURRING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE LICENSED
SOFTWARE, DOCUMENTATION, SOURCE CODE, SOURCE MATERIALS OR DERIVATIVE WORKS.
6. TRADEMARKS
Licensee acknowledges that, any symbols, trademarks and service marks
adopted by Licensor to identify the Licensed Software ("Trademarks") belong to
Licensor and that Licensee shall have no rights in such Trademarks except as
expressly set forth herein. All Licensee documentation, associated brochures,
packaging and advertising shall display the MeterWorks Enabled logo. Such
Trademarks shall be used in accordance with Licensor's guidelines for use of the
Trademarks issued from time to time. Samples of all materials that may be
distributed by Licensee displaying the Trademarks shall be submitted to Licensor
upon Licensor's reasonable request to verify compliance with Licensor's
guidelines for use of the Trademarks, and the Trademarks shall be used only in a
form so approved by Licensor. Any good will arising out of the use of Licensor's
Trademarks hereunder shall inure to the benefit of Licensor. At no time will
Licensee challenge or assist others to challenge Licensor's MeterWorks to
identify the Licensed Software or the registration thereof or attempt to
register any trademarks, marks or trade names confusingly similar to those
Trademarks.
6
7. INTELLECTUAL PROPERTY INDEMNITY
7.1 Indemnity. Licensor shall defend Licensee against any claim that
the Licensed Software used within the scope of this Agreement infringes a United
States copyright or trade secret under applicable state or federal law and shall
pay any settlements entered into or damages awarded against Licensee to the
extent based on such a claim, provided that (i) Licensee notifies Licensor
promptly in writing of the claim; (ii) Licensor has sole control of the defense
and all related settlement negotiations; (iii) Licensee provides Licensor with
all necessary assistance, information, and authority to perform the above;
provided that if in providing such assistance, Licensee is obligated to provide
personnel to spend time beyond that normally expected with respect to minor,
routine inquiries, Licensee shall not be obligated to provide such assistance
unless its personnel are compensated at the fully burdened cost of their
employment plus reimbursement for all associated out-of-pocket expenses, with
respect to all time spent in assisting Licensor with respect to the foregoing.
If Licensor fulfills its defense obligations hereunder, Licensee shall defer to
Licensor's forum selection for any such infringement actions.
7.2 Exclusions. Licensor shall have no liability for any claim of
infringement based on (i) use of other than the latest release of the Licensed
Software if the infringement would have been avoided by use of the latest
release; (ii) modification of the Licensed Software by Licensee, including any
Derivative Works, if the infringement would have been avoided without such
modification; or (iii) the combination or use of the Licensed Software furnished
hereunder with materials not furnished by Licensor if such infringement would
have been avoided by use of the Licensor materials alone; (iv)willful
infringement by Licensee; or (v) use of symbols, trademarks or service marks
other than as required by Licensor. To the extent that Licensee fails to
mitigate damages and expenses, Licensor shall have no liability for those
additional damages and expenses.
7.3 Alternatives. In the event the Licensed Software is held to, or
Licensor believes is likely to be held to, infringe a United States copyright or
United States trade secret Licensor shall have the right at its sole option and
expense to (i) substitute or modify the Licensed Software so that it is
noninfringing; or (ii) obtain for Licensee a license to continue using the
Licensed Software.
7.4 Sole Obligation. The foregoing states the sole obligation and
exclusive liability of Licensor (express, implied, statutory, or otherwise) for
any infringements or claims of infringement of any patent, copyright, trademark,
trade secret, or other intellectual property right.
8. TERM AND TERMINATION
8.1 Initial Term. This Agreement shall become effective on the
Effective Date and shall remain in effect for a period of five (5) years
thereafter unless the Agreement is terminated as provided below; provided,
however, upon payment of the full $500,000 in royalties set forth in Schedule D,
Licensee shall have fully paid up perpetual worldwide licenses to use
(consistent with its use hereunder) the Licensed Software, without the right to
sublicense, and to embed the Object Code in Licensee's (and its assignees')
software and products, with no obligation to make further payment to Licensor,
and which fully paid up license shall survive any termination of this Agreement
and be binding upon Licensor, its successors and assigns. This fully paid
License shall continue even if Licensee does not hereafter continue to utilize
Licensor for maintenance or support. This Agreement shall be renewable for
successive one-year terms in the event Licensee
7
provides sixty (60) days' advance written notice of renewal to the Licensor
prior to the end of the initial term or applicable renewal period in question.
Any renewal of this Agreement shall not create liability to Licensee except with
respect to its obligation to observe its covenants hereunder and to pay the
applicable maintenance fee for the Licensed Software.
8.2 Termination.
8.2.1 Breach. If either party defaults in a payment or other
material obligation under this Agreement or under the Software License
Agreement, MeterFlow (Source Code) executed contemporaneously herewith (the
"MeterFlow Agreement") and continues in default for a period of thirty (30) days
after written notice of default is given to it by the other party, the other
party may terminate and cancel this Agreement and the MeterFlow Agreement, in
accordance with the provisions of this Section 8, upon written notice of
termination given to the defaulting party.
8.2.2 Insolvency. Either party may terminate and cancel this
Agreement and the MeterFlow Agreement immediately by notice to the other if:
(a) the other ceases to carry on its business; or
(b) a receiver or similar officer is appointed for the other
and is not discharged within ninety (90) days; or
(c) the other becomes insolvent, admits in writing its
inability to pay debts as they mature, is adjudicated bankrupt, or
makes an assignment for the benefit or its creditors or another
arrangement of similar import; or
(d) proceedings under bankruptcy or insolvency laws are
commenced by or against the other and are not dismissed within (30)
days.
Notwithstanding the foregoing, neither this Agreement nor the MeterFlow
Agreement may be terminated by Licensor hereunder if Licensee has fully paid the
full $500,000 royalty amount.
8.3 Effect of Termination. Upon termination of this Agreement, (i) the
rights and licenses granted to Licensee pursuant to this Agreement shall
terminate after expiration of a ninety (90) day run-off period, (ii) Licensee
shall ship to Licensor, within ninety (90) days, all tangible items in its
possession which are proprietary to Licensor and (iii) Licensee shall cease to
use all intellectual property of Licensor after expiration of a ninety (90) day
run-off period. Notwithstanding the above, Licensee shall have the limited,
perpetual right to support all of its customers using Licensee Products, but in
no event will support be construed as including the right to manufacture or
sell.
8.4 Survival. The provisions of Section 2.5 (Rights in Licensee
Products and Derivative Works), Section 2.8 (Ownership; Derivative Works), 5.6
(Licensor Warranty Disclaimer), Section 7 (Intellectual Property Indemnity), 9
(Confidentiality), 10 (Limitation of Liability) and 11 (Miscellaneous) shall
survive the termination or cancellation of this Agreement for any reason.
8
9. CONFIDENTIALITY
9.1 Obligations. The parties each acknowledge and agree that the
Licensed Software, Source Materials and any other information provided to one
party (the "Receiving Party") by the other party (the "Disclosing Party") (which
other information is marked as "proprietary" or "confidential", or, if disclosed
orally, is reduced to writing and similarly marked and delivered to Licensee
within thirty (30) days of initial disclosure) hereunder constitutes the
confidential and proprietary information of the Disclosing Party, and that
Receiving Party's protection thereof is essential to this Agreement. The
Receiving Party shall retain in strict confidence and not disclose to any third
party (except as authorized by this Agreement) without Disclosing Party's
express written consent any and all such information. Dissemination of such
information to Receiving Party's subsidiaries or affiliates is permitted,
provided that such Receiving Party agrees to be responsible for the maintenance
of such confidential information and agrees to cause its subsidiaries and
affiliates to execute such form of confidentiality agreement as the other party
may reasonably require consistent with the confidentiality limitations of this
Section 9.1.
9.2 Exceptions. Excluded from such confidential information is that
which the Receiving Party can demonstrate: it had in its possession without
confidentiality obligations prior to disclosure by Disclosing Party, is
independently developed by Receiving Party by employees other than those having
access to confidential information hereunder, is known or becomes known to the
general public without breach of this Agreement, is received rightfully by
Receiving Party and without confidential limitation from a third party.
9.3 Source Code Protections.
9.3.1 Source Code Protection. Subject to the term of Section 2
above, Licensee shall not under any circumstances copy, duplicate or otherwise
reproduce the Source Materials in any manner except as provided in this Section
9.3. Source Materials shall not be permitted outside the Authorized Location.
Licensee agrees to limit access to the Source Materials strictly to those
persons who require access in order to carry out the permitted uses of such
Source Materials hereunder. Each copy of the Source Materials shall be marked as
the confidential and proprietary property of Licensor to which access is
restricted, and shall be kept and used solely at the Licensee's secure
development facilities ("Development Facility") under password protection.
Licensee shall ensure that the Source Materials cannot be accessed in any
insecure manner from any network, computer or similar device outside of the
Development Facility. Licensee agrees to limit access to the Source Materials
twenty four (24) hours a day strictly to those employees and independent
contractors to whom access is reasonably necessary in order to carry out the
permitted uses of the Source Materials hereunder. Licensee shall inform such
employees and contractors of Licensee's obligation to maintain the
confidentiality of the Source Materials and other confidential information.
Licensee will use its best efforts to ensure that all such employees abide by
the terms of such obligations. Licensee shall keep records of all persons who
have access to the Source Materials. At Licensor's reasonable request and upon
reasonable notice, Licensee agrees to provide such records to Licensor for
review within a reasonable time period. In no event shall the Source Materials
be used in any way, either directly or indirectly, for the development of other
products or for any other purpose other than the development of Licensee
Products.
9.3.2 Independent Contractors. Licensee may employ suitable
independent third party contractors to assist Licensee in modifying the Source
Materials solely at the
9
Development Facility in accordance with the license granted in Section 2.1
above. Licensee agrees to inform all such contractors who are given access to
the Licensed Software, the Source Materials or other Licensor confidential
information by Licensee that such materials are confidential trade secrets of
Licensor and are licensed to Licensee as such. Licensee may not sublicense the
Licensed Software to its third party contractors and Licensee agrees that it
will inform each contractor working with or having access to Licensor's trade
secret or proprietary information that, except as provided in this Agreement,
Licensee is prohibited from transferring, subleasing, licensing, sublicensing,
selling, assigning, distributing or giving such confidential trade secret
information to anyone outside of Licensee's company without the express prior
written authority of Licensor. Licensee shall be fully responsible for the
conduct of any of its third party contractors who may in any way breach this
Agreement.
9.4 Notification of Security Breach. Licensee agrees to notify Licensor
promptly in the event of any breach of its security under conditions in which it
would appear that the trade secrets contained in the Licensed Software were
prejudiced or exposed to loss. Licensee shall, upon request of Licensor, take
all other reasonable steps necessary to recover any compromised trade secrets
disclosed to or placed in the possession of Licensee by virtue of this
Agreement. The cost of taking such steps shall be borne solely by Licensee.
9.5 Injunctive Relief. Each party acknowledges that any breach of any
of its obligations with respect to confidentiality or use of the other party's
confidential information hereunder is likely to cause or threaten irreparable
harm to the non-breaching party, and, accordingly, each party agrees that in the
event of such breach the non-breaching party shall be entitled to equitable
relief to protect its interest therein, including but not limited to preliminary
and permanent injunctive relief, as well as money damages.
10. LIMITATION OF LIABILITY
IN NO EVENT SHALL LICENSOR HAVE ANY LIABILITY FOR ANY INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, ARISING OUT OF THIS AGREEMENT, INCLUDING BUT NOT LIMITED TO LOSS
OF ANTICIPATED PROFITS, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF
ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
11. MISCELLANEOUS
11.1 Assignment. Licensee shall not assign this Agreement or any rights
or obligations hereunder, by operation of law or otherwise, without the prior
written consent of Licensor which shall not be unreasonably withheld; provided,
however, that Licensee may assign this Agreement without Licensor's consent in
the event of a change of control of Licensee or its subsidiaries or in the event
of the sale of all or substantially all of Licensee's assets. Licensor may not
assign this Agreement without Licensee's prior written consent, which consent
shall not be unreasonably withheld.
11.2 Notices. All notices between the parties shall be in writing and
shall be deemed to have been given if personally delivered or sent by certified
or registered mail (return receipt),
10
telecopy or facsimile to the addresses set forth as follows, or such other
address as is provided by notice as set forth herein:
IF TO LICENSOR, TO:
Hifn, Inc.
▇▇▇ ▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇
▇▇▇ ▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: ▇▇▇▇▇▇ ▇▇▇▇▇
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
IF TO LICENSEE, TO:
▇▇▇▇▇▇▇ Technology Development, L.L.C.
▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇ - ▇▇▇▇▇ ▇▇▇
▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: ▇▇▇▇ ▇▇▇▇▇▇▇▇
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
E-Mail: ▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇.▇▇▇
Notices shall be deemed effective upon receipt or, if delivery is not effected
by reason of some fault of the addressee, when tendered.
11.3 Technical Contact. Licensor shall provide upgrades and other
releases (in accordance with Schedule E) to the Licensee's primary technical
contact. All technical information will be delivered by mail or electronically
to this technical contact. Licensee agrees to notify Licensor should such the
technical contact change. The Licensee's technical contact is as follows:
TECHNICAL CONTACT:
▇▇▇▇▇▇▇ Technology Development, L.L.C.
▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇▇▇ ▇▇▇▇ - ▇▇▇▇▇ ▇▇▇
▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: ▇▇▇▇▇▇▇ ▇▇
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
E-Mail: ▇▇▇@▇▇▇▇▇▇▇▇▇▇▇.▇▇▇
11.4 Governing Law; Forum Selection. This Agreement shall be governed
by the laws of the State of Illinois, without reference to its conflict of laws
principles. All disputes arising out of this Agreement between the parties shall
be subject to the exclusive jurisdiction and venue of the Illinois state courts
of ▇▇▇▇ County, Illinois, and the parties consent to the personal and exclusive
jurisdiction of these courts. This forum selection designation shall not apply
to third party infringement actions which Licensor is defending hereunder.
11.5 Severability. Any term or provision of this Agreement held to be
illegal or unenforceable shall, if possible, be interpreted so as to be
construed as valid, but in any event the validity or enforceability of the
remainder hereof shall not be affected.
11.6 Export Regulations. Licensee understands that Licensor is subject
to regulation by agencies of the U.S. government, including the U.S. Department
of Commerce, which prohibits export or diversion of certain technical products
to certain countries. Licensee warrants
11
that it will comply in all respects with the export and re-export restrictions
applicable to the technology and documentation licensed hereunder.
11.7 Waiver. The waiver of, or failure to enforce, any breach or
default hereunder shall not constitute the waiver of any other or subsequent
breach or default.
11.8 Relationship of Parties. Nothing herein shall be deemed to create
any agency, joint venture, or partnership relationship between the parties.
Neither party shall have the right to bind the other to any obligation, nor have
the right to incur any liability on behalf of the other. Nothing contained in
this Agreement shall in any way, prevent, restrict, or otherwise affect the
rights or either party to enter into agreements with third parties for similar
software to accomplish similar objectives.
11.9 Press Release. Upon completion of the Agreement, Licensor may
choose to issue a press release within sixty (60) days of the effective date of
this agreement indicating the Licensor's licensing to Licensee of the Licensed
Software. Such press release shall be subject to review and approval by both
parties prior to its final release.
11.10 Entire Agreement. This Agreement, along with the Schedules
attached hereto which are incorporated herein by reference, sets forth the
entire Agreement between the parties and supersedes any and all prior proposals,
agreements, and representations between them, whether written or oral. This
Agreement may be changed only by mutual agreement of the parties in writing.
11.11 Counterparts. This Agreement may be executed simultaneously in
two or more counterparts, each of which will be considered an original, but all
of which together will constitute one and the same instrument.
IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be
signed by duly authorized officers or representatives as of the Effective Date.
HIFN, INC. ▇▇▇▇▇▇▇ DEVELOPMENT TECHNOLOGY, L.L.C.
By: /s/ ▇▇▇▇▇ ▇▇▇▇▇▇ By: /s/ ▇▇▇▇ ▇▇▇▇▇▇▇▇
------------------------------------- --------------------------------------
▇▇▇▇▇ ▇▇▇▇▇▇, Chief Executive Officer ▇▇▇▇ ▇▇▇▇▇▇▇▇, Chief Executive Officer
Date: 8/30/02 Date: 8/30/02
------------------------------------ ------------------------------------
12
SCHEDULE A
LICENSED SOFTWARE
Licensor has developed a body of software that interacts with software on other
computers to perform network monitoring in a method known as "RMON." Licensor
markets the Licensed Software under the MeterWorks family name of products. This
software is described in Licensor's document entitled MeterWorks Agent Technical
Description version 5.0, which is incorporated by reference into this Agreement.
Licensee desires to incorporate Licensor's RMON2 software into some or all of
Licensee's products.
It is understood by both the Licensor and Licensee that the RMON software does
not stand alone. Rather, it must be incorporated into a larger body of software.
Such incorporation necessarily involves the creation of new software to act as
an interface between the RMON software and the system into which it is being
embedded. Integration of the RMON software is solely the responsibility of the
Licensee.
A-1
SCHEDULE B
LICENSEE PRODUCTS
The following is a list of products and their functionality that have
been authorized for use with the Licensed Software:
Product Name Type of Product Product Description
------------ --------------- -------------------
Distributed Management Enterprise Systems Appliance oriented, distributed management platform
Appliance Management Tool that provides advanced Fault, Configuration,
Accounting, Performance and Security management
functionality. Product is distributed in several
hardware configurations including but not limited to,
a set-top box and rack-mount appliance.
Note: The addition of any products to this list that are the result of a change
in control of Licensee is strictly prohibited. Notwithstanding, Licensee has the
right to add products as described in Section 1.6, Licensee Products.
B-1
SCHEDULE C
MINIMUM TERMS OF END USER LICENSE AGREEMENT
1. LICENSE GRANT.
This Product incorporates Licensor's MeterWorks software and other
software, ("Licensed Technology") which have been licensed to Licensor by HIFN,
Inc. Licensor grants to Licensee a nonexclusive, nontransferable sublicense to
use the Licensed Technology only for Licensee's internal purposes. Licensee may
not copy, decompile, reverse engineer, disassemble, or otherwise attempt to
modify the Licensed Technology, including the source code or any software
contained therein or any documentation accompanying the Licensed Technology.
Licensee may not rent, lease, or grant sublicenses or other rights to the
Licensed Technology. Licensee may not remove any proprietary notices, labels or
marks incorporated in, marked on, or fixed to the Licensed Technology by
Licensor or its suppliers. Licensee may not use the Licensed Technology for the
development of or in conjunction with any software application intended for
resale which employs the Licensed technology. Any use or attempted use of the
Licensed Technology in violation of the restrictions contained in this section
is a breach of the end-user agreement and will cause irreparable harm to
Licensor or its suppliers entitling Licensor or its suppliers to injunctive
relief in addition to all legal remedies.
2. PROPRIETARY RIGHTS.
This license is not a sale. Title and all intellectual property rights
to the Licensed Technology and any accompanying documentation shall remain with
Licensor or its suppliers.
3. LIMITED WARRANTY AND DISCLAIMER.
The Licensed Technology is licensed to Licensee "AS IS" and LICENSOR
AND ITS SUPPLIERS MAKE AND LICENSEE RECEIVES NO WARRANTIES OR CONDITIONS,
EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND LICENSOR AND ITS SUPPLIERS
SPECIFICALLY DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT
AND FITNESS FOR A PARTICULAR PURPOSE. Licensor does not warrant that the
Licensed Technology will meet Licensee's requirements or that the operation of
the Licensed Technology will be uninterrupted or error free.
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO THE
ABOVE EXCLUSIONS MAY NOT APPLY TO LICENSEE. THIS WARRANTY GIVES LICENSEE
SPECIFIC LEGAL RIGHTS. LICENSEE MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE.
4. LIMITATION OF LIABILITY.
IN NO EVENT SHALL LICENSOR OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES,
INCLUDING COSTS OF PROCUREMENT OF SUBSTITUTE PRODUCTS OR SERVICES, LOST PROFITS,
OR ANY SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT.
C-1
5. EXPORT RESTRICTION.
Licensee agrees not to export or reexport the Licensed Technology in
any form without the appropriate United States and foreign government licenses.
Licensee's failure to comply with this provision is a material breach of the
end-user agreement.
6. THIRD PARTY BENEFICIARY.
Licensee is notified that HIFN, Inc., a California corporation with
principal offices at ▇▇▇▇ ▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇ ("Licensor"),
is a third party beneficiary to the end-user agreement. The provisions of the
end-user agreement are made expressly for the benefit of Licensor and are
enforceable by Licensor in addition to Licensor.
C-2
SCHEDULE D
LICENSE FEE AND ROYALTY PAYMENTS
A. License Fees.
▇▇▇▇▇▇▇ Technologies is licensing Hifn's MeterWorks RMON 2 agent, and
MeterFlow, including the MeterFlow Performance Metrics in return for a licensing
fee of $300,000. See MeterFlow License Agreement between ▇▇▇▇▇▇▇ Technologies
and Hifn dated August 31, 2002 for additional terms of payment.
B. Royalties.
A royalty will be paid for each Licensee device that includes an
implementation of the MeterFlow Object Code: $8 each.
C. Royalty Schedule.
Royalties will be considered paid in full once cumulative royalty
payments for MeterWorks. MeterFlow and MeterFlow PM total: $500,000, inclusive
of any royalty payments per Section B immediately above or with respect to any
royalty payments made by Licensee or its successor in interest pursuant to
Licensee's MeterFlow license agreement with Licensor executed of even date
herewith; in no event shall Licensee be obligated to pay royalties in excess of
$500,000 cumulatively with respect to the Licensee Products; after payment of
said $500,000 all Licensee Products shall be deemed fully paid up. See Schedule
D, License Fee and Royalty Payments in the MeterFlow License Agreement dated of
even date herewith.
D. General Terms.
1. Payments and Accounting. With respect to the royalties set forth
herein, Licensee shall keep complete and accurate records. These records shall
be retained for a period of three (3) years from the date of payment,
notwithstanding the expiration or other termination of this Agreement. Licensee
agrees to permit its directly related financial records and accounts to be
examined, not more than once a year, during normal business hours, to verify the
amount of royalties payable to Licensor under this Agreement. Prompt adjustment
shall be made by Licensee to Licensor corresponding to the net amount of any
underpayment of royalties due hereunder. If such examination reveals an
underpayment of more than five percent (5%), then Licensee shall promptly
reimburse Licensor for the cost of the examination and for any amounts
underpaid. Until full payment of the aggregate $500,000 royalty amount, the
actual annual royalty payment shall be the greater of the total royalties
generated from licenses or the minimum annual commitment.
2. Reports and Payment Terms. Within thirty (30) days after the
beginning of each quarter following first customer shipment during the term of
this Agreement, Licensee shall furnish to Licensor a statement in suitable form
showing all products subject to royalties hereunder which were sold, leased,
licensed, transferred or otherwise disposed of during such fiscal quarter, and
the amount of royalties payable thereon. If no products are subject to
D-1
royalties, then that fact shall be shown on such statement. Notwithstanding the
minimum royalty payments described in the schedule above will be paid within 30
days after the beginning of each quarter following the first customer shipment.
This first quarter is estimated to be the second quarter of calendar year 2003.
3. Withholding Taxes. All payments by Licensee shall be made free and
clear of, and without reduction for, any withholding taxes. Any such taxes which
are otherwise imposed on payments to Licensor shall be the sole responsibility
of Licensee. Licensee shall provide Licensor with official receipts issued by
the appropriate taxing authority or such other evidence as is reasonably
requested by Manufacturer to establish that such taxes have been paid.
D-2
SCHEDULE E
MAINTENANCE AND SOFTWARE UPGRADES
1. Licensor shall provide Licensee with error corrections and
maintenance releases for the Licensed Software which are released from time to
time to Licensor's other similarly situated Licensed Software Licensees for an
annual fee amounting to $15,000. These fees are the same fees described in
Section 5.3 of the Agreement. This $15,000 fee covers both MeterFlow and
MeterWorks. The total annual payment under this Agreement and the MeterFlow
Agreement shall be $15,000.
2. Licensor shall make Software Upgrades and Enhancements available to
Licensee for an additional annual fee of $15,000. These fees are the same fees
described in Section 2.9 of the Agreement. The total annual payment under this
Agreement and the MeterFlow Agreement shall be $15,000.
3. Should Licensee at anytime choose to discontinue Maintenance or
Upgrade Services, it may do so upon notice to Licensor.
4. Extended Maintenance Services
4.1. Hours of Service. Licensor will provide Maintenance and
Support Service between the hours of 0830 to 1730 Pacific Time, Monday through
Friday, excluding scheduled Holidays.
4.2. Problem Class Priorities.
4.2.1. "Class I Priority" means a problem which stops the end
user's production, results in lost or destroyed data, renders the Product
Software or end user system unusable, causes a software feature failure that
cannot be avoided by alternate methods or which otherwise causes a shutdown of
the essential operations which are dependent on the Product Software.
4.2.2. "Class II Priority" means a problem which requires a
reset of product and may cause serious shutdown of some of the operations, which
are dependent on the Product Software. The fix of the problem is very cumbersome
and may involve some reprogramming.
4.2.3. "Class III Priority" means a problem which causes only
minor inconvenience to the end user including, but not limited to, misspelled
error messages and documentation errors.
4.2.4. "Class IV Priority" means a request for information or
clarification on any aspect of the Product(s).
4.2.5. Prompt Response. (i) To acknowledge reported Problems
and to respond such that through Licensor's best good faith efforts a Problem is
either corrected, or a
E-1
reasonable work-around is implemented, or a plan to resolve is presented and
mutually agreed upon; according to the following criteria:
Priority Acknowledgment Response
--------------------------------------------------------------------------
Class Time Frame Time Frame
----- ---------- ----------
I Immediate One Day
II One Business Day Three Business Days
III One Business Day Five Business Days
IV One Business Day Ten Business Days
5. Support of Releases. Licensor will provide the Licensee with a
period of support for the current prior release of the Licensed Software for
one-hundred-eighty (180) days from the date of release; and for the current
release, one (1) year from the date of release.
5.1. Product Discontinuance. Licensor will provide the Licensee
with sixty (60) to ninety (90) days notice prior to the discontinuance of the
Licensed Software as a product offering. Discontinuance of the Licensed Software
as a product will in no way change the terms of this Agreement.
5.2. On-Site Support. Licensor will go to Licensee's end
customer's site at Licensees request in order to resolve Class I or Class II
Priority Problems if the problem cannot be reproduced by Licensor or Licensee.
Licensee will pay Licensor a per-hour on-site support payment plus reasonable
expenses.
E-2
SCHEDULE F
AUTHORIZED LOCATION
Licensee's primary office location is ▇▇▇▇ ▇. ▇▇▇▇▇▇▇▇▇ ▇▇▇▇,
▇▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇ ▇▇▇▇▇. This site shall serve as the Authorized Location for
development utilizing the Licensed Software.
F-1
SCHEDULE G
ITEMIZATION OF INTEROPERABILITY
Interoperability Statement.
Licensor extends the Functionality sub-section (5.5) of this agreement to
include Interoperability for the following Embedded Software Products. Licensor
will continue to support these software products in future releases of the
Licensed Software.
1. Epilogue Technology Corporation ENVOY versions 6.0, 7.0 and 7.3
2. Epilogue Technology Corporation ATTACHE versions 2.1, 3.0, 3.1, 3.2 and 3.4
In addition, the following table sets forth the compliance of the MeterWorks
family of products to the RMON and RMON2 related RFCs.
RFC 1513 (Token RFC 2074 (RMON2
Ring Additions to ▇▇▇ ▇▇▇▇ protocol directory
Product RFC 1757 (RMONI) RMONI) (RMON2 mibs) specifications)
------- ---------------- ----------------- ------------ ------------------
MeterWorks Lite 4 Group Compliance Yes N/A N/A
(Etherstats, History,
Alarms Events)
MeterWorks Yes N/A N/A
MeterWorks Pro Yes Yes Yes
G-1