THIS FIRST AMENDMENT TO LITHIUM OFFTAKE AGREEMENT is made with effect as of October 28, 2024 (the “First Amendment Agreement”). AMONG: LITHIUM AMERICAS CORP., a corporation incorporated under the laws of the Province of British Columbia (“LAC Parent”)

Exhibit 99.4

Execution Version

THIS FIRST AMENDMENT TO LITHIUM OFFTAKE AGREEMENT is made with effect as of October 28, 2024 (the “First Amendment Agreement”).

AMONG:

LITHIUM AMERICAS CORP., a corporation incorporated under the laws of the Province of British Columbia

(“LAC Parent”)

– and –

LITHIUM NEVADA CORP., a corporation incorporated under the laws of Nevada

(“LAC Nevada”)

– and –

GENERAL MOTORS HOLDINGS LLC, a limited liability company organized and existing under the laws of Delaware

(on behalf of itself and its affiliates and subsidiaries, collectively “GM”)

WHEREAS, Lithium Americas (Argentina) Corp. (“LAC Argentina”) and GM entered into a lithium offtake agreement dated as of February 16, 2023 (the “Offtake Agreement”);

WHEREAS, as of October 3, 2023, 1397468 BC Ltd. (referred to as “Spinco” in the Offtake Agreement) changed its name to Lithium Americas Corp., which is one of the counterparties to this Agreement and referred to herein as LAC Parent;

WHEREAS, pursuant to an assignment agreement dated October 3, 2023 (the “First Assignment Agreement”), LAC Argentina assigned the Offtake Agreement to LAC Parent;

WHEREAS, pursuant to an assignment agreement dated October 28, 2024 (the “Second Assignment Agreement”), LAC Parent assigned the Offtake Agreement to LAC Nevada, the execution and delivery of the Second Assignment Agreement being conditioned on the simultaneous execution and delivery of this First Amendment Agreement;

WHEREAS, GM has agreed to in good faith consider providing support to LAC Parent and LAC Nevada with respect to any loan that LAC Nevada may obtain from the United States Department of Energy in consideration for the extension of the term of the Offtake Agreement as contemplated herein; and

WHEREAS, the parties hereto, being LAC Parent, LAC Nevada and GM (collectively, the “Parties”, and individually, a “Party”), wish to set out the terms and conditions of certain amendments to the Offtake Agreement, as assigned, references in this First Amendment Agreement to the Offtake Agreement being to the Offtake Agreement, as so assigned by the provisions of the First Assignment Agreement and the Second Assignment Agreement;

NOW, THEREFORE, in consideration of the mutual covenants and agreements herein contained and for other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged by the Parties hereto, the Parties mutually agree as follows:

1. Definitions and Interpretation. All terms used but not otherwise defined herein and defined in the Offtake Agreement shall have the same meaning herein as in the Offtake Agreement. As used herein, the singular shall include the plural and the plural shall include the singular as the context may require.

2. Joinder. By its execution and delivery of this First Amendment Agreement (and notwithstanding the First Assignment Agreement), LAC Parent agrees to join into the Offtake Agreement for the purposes set forth in this First Amendment Agreement. As a result of this joinder provision, LAC Parent is now an additional party to the Offtake Agreement, together with LAC Nevada, although its obligations are not joint and several. Notwithstanding such joinder, as a result of the Second Assignment Agreement, LAC Nevada is the “Supplier” under the Amended Offtake Agreement (as defined below).

3. Amendment to the Offtake Agreement. Pursuant to Section 16.4 of the Offtake Agreement, the Parties hereby agree to amend the Offtake Agreement to delete the stricken text (indicated textually in the same manner as the following example: stricken text), add the double-underlined text (indicated textually in the same manner as the following example: double-underlined text) and move the single-underlined text (indicated textually in the same manner as the following example: single-underlined text) as set forth in the pages of the Offtake Agreement attached as Exhibit A hereto (the Offtake Agreement, as so joined in and amended by this First Amendment Agreement and as may be further amended, supplemented or otherwise modified or restated from time to time, the “Amended Offtake Agreement”).

4. Acknowledgement. The Parties acknowledge that, except as otherwise expressly indicated herein, the Amended Offtake Agreement shall continue unamended and without novation and remain in full force and effect and, except as amended and supplemented by this First Amendment Agreement, is in all respects confirmed, ratified and preserved.

5. Further Assurances. The Parties shall at all times hereafter at the reasonable request of any other Party execute and deliver all such further documents and instruments and shall do and perform such acts as may be necessary to give full effect to the intent and meaning of this First Amendment Agreement.

6. Successors and Assigns. This First Amendment Agreement shall be binding upon and enure to the benefit of the Parties and their respective successors and permitted assigns.

7. Severability. The provisions of this First Amendment Agreement are intended to be severable. If any provision hereof is held to be invalid or unenforceable in whole or in part in any jurisdiction, such provision shall, as to such jurisdiction, be ineffective to the extent of such invalidity or unenforceability without in any manner affecting the validity or enforceability thereof in any other jurisdiction or the remaining provisions hereof in any jurisdiction.

- 2 -

8. Modifications; Waiver. Any amendment or modification or waiver of any right under any provision hereof shall be in writing and signed by the Parties. Any waiver hereunder shall be effective only for the specific purpose for which it is given and for the specific time period, if any, contemplated in such waiver. No failure or delay by any party in exercising any right, power or privilege hereunder shall operate as a waiver of such right, power or privilege and any waiver of any breach of the provisions hereof shall be without prejudice to any rights with respect to any other further breach.

9. Notices. All notices hereunder shall be given and received as provided in Section 16.2 of the Amended Offtake Agreement, provided that the address of Supplier and LAC Parent are as follows:

10. Governing Law. This First Amendment Agreement is governed by, and is to be interpreted, construed and enforced in accordance with, the laws of the State of New York, excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods and without regard to its conflict of laws principles.

11. Counterparts. This First Amendment Agreement may be executed in counterparts and by different Parties in separate counterparts, each of which when so executed shall be deemed an original and all of which, when taken together, shall constitute one and the same instrument.

[Remainder of Page Intentionally Left Blank]

- 3 -

IN WITNESS WHEREOF, the Parties have executed this First Amendment Agreement as of the day and year first written above.

[Signature Page to First Amendment to Lithium Offtake Agreement]

Exhibit A

Form of Amended Offtake Agreement

(see attached)

Conformed through:

Assignment Agreement (as of the date hereof)

First Amendment (as of the date hereof)

EXECUTION VERSION

LITHIUM OFFTAKE AGREEMENT

by and between

LITHIUM AMERICASNEVADA CORP.

LITHIUM AMERICAS CORP.

and

GENERAL MOTORS HOLDINGS LLC

February 16, 2023

LITHIUM OFFTAKE AGREEMENT

This Lithium Offtake Agreement (this “Agreement”) is dated February 16, 2023 (the “Execution Date”) and is betweenamong General Motors Holdings LLC (on behalf of itself and its affiliates and subsidiaries, collectively, “GM”) and, Lithium Americas Corp. (“LAC Parent”), and Lithium Nevada Corp. (as assignee of LAC Parent, “Supplier”). GM, LAC Parent and Supplier are sometimes referred to in this Agreement individually as a “Party” or collectively as the “Parties”.

RECITALS

A. Supplier is developing a lithium mine at the ▇▇▇▇▇▇▇ Pass lithium project in ▇▇▇▇▇▇▇ Pass, Nevada (the “Project” or the “▇▇▇▇▇▇▇ Pass Project” or “▇▇▇▇▇▇▇ Pass”).

B. GM and Supplier entered into a master purchase agreement, dated as of January 30, 2023 (the “Master Purchase Agreement”) pursuant to which, among other things, GM agreed to invest in subscription receipts that are convertible into common shares of Supplier.

C. GM desires to, directly and indirectly through its Designated Purchasers (as defined below), purchase lithium carbonate (“Product”) from the Project from Supplier.

D. Supplier would, at optimal anticipated production capacity, have an initial output of approximately               (“Phase One”).

E. The Parties desire to establish and structure a supply relationship such that GM and/or its Designated Purchasers will purchase from Supplier, and Supplier will produce, sell, and deliver to GM and/or its Designated Purchasers, the Product, on the terms and conditions set forth in this Agreement and all exhibits hereto including, but not limited to, the General Terms and Conditions attached hereto as Exhibit A (the “General Terms”).

F. Supplier is the indirect wholly owned subsidiary of LAC Parent, and LAC Parent and Supplier are collectively referred to herein as the “LAC Parties”.

G. LAC Parent and GM entered into a tranche 2 subscription agreement on October 3, 2023 in respect of an equity investment to be made by GM in LAC Parent (the “Tranche 2 Subscription Agreement”).

BASED UPON THE FOREGOING RECITALS and other good and valuable consideration, the receipt and adequacy of which are acknowledged, the Parties agree as follows:

TERMS AND CONDITIONS

The effective date of this Agreement shall be the Execution Date. The commercial terms of purchase and sale set forth in this Agreement shall become operative as of the Phase One Effective Date (as defined below), provided that:

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Supplier covenants and agrees that no portion of the lithium will be extracted, processed or recycled by a foreign entity of concern, as such term is defined in Section 30D of the Code. Supplier will provide attestations, signed by an officer of Supplier, that such lithium was not extracted, processed or recycled by a foreign entity of concern under Section 30D of the Code. Such attestation shall be in form and substance acceptable to GM and consistent to satisfy GM’s obligations under Section 30D of the Code, including any regulations, notices or guidance thereunder.

GM will have access and information rights to Supplier’s ▇▇▇▇▇▇▇ Pass location and Supplier will permit GM and the Designated Purchasers a minimum of four (4) aggregated and a maximum of eight (8) aggregated site visits to ▇▇▇▇▇▇▇ Pass (only) per year. GM will comply with all health and safety regulations of Supplier. Such site visits will be at the sole risk, cost and expense of GM. GM shall give Supplier a minimum of 72 hours prior written notice in advance of each site visit. Each such site visit shall not interfere with the operations of Supplier. To the extent Supplier changes or adds a new lithium processing location in accordance with Section 10.1 of this Agreement, GM’s rights pursuant to this Section 11.1 shall also apply to such additional locations. These access and information rights shall include access to Supplier’s premises and books and records for the purpose of auditing Supplier’s compliance with the terms of this Agreement and any Designated Purchaser Agreement (including, without limitation, charges under this Agreement and any Designated Purchaser Agreement) or inspecting or conducting an inventory of finished Products, work-in-process, raw materials, and all work or other items to be provided pursuant to this Agreement located at Supplier’s premises. Supplier will cooperate with GM and the Designated Purchasers so as to facilitate such audit, including, without limitation, by segregating and promptly producing such records as GM and any Designated Purchaser may reasonably request, and otherwise making records and other materials accessible to GM and any Designated Purchaser. Supplier will preserve all records pertinent to this Agreement and any Designated Purchaser Agreement, and Supplier’s performance under this Agreement and any Designated Purchaser Agreement, for a period of not less than one year after any GM Buyer’s final payment to Supplier under this Agreement and any Designated Purchaser Agreement. Any such audit or inspection conducted by GM and any Designated Purchaser or their representatives will not constitute acceptance of any Products (whether in progress or finished), relieve Supplier of any liability under this Agreement or any Designated Purchaser Agreement or prejudice any rights or remedies available to GM.

17

GM and Supplier will establish an ESG committee (the “ESG Committee”) to collaborate on key initiatives such as responsible sourcing. The ESG Committee will meet at least once per Quarter, unless otherwise mutually agreed by the Parties.

The PartiesSupplier and GM shall meet at least once per calendar year during the Phase One Term as reasonably appropriate on a date and location mutually agreeable to the PartiesSupplier and GM (each a “Review Meeting”). At each Review Meeting the PartiesSupplier and GM shall seek to address and discuss any outstanding issues under this Agreement, including without limitation, the reconciliation of purchase orders with respect to the then current Annual Quantity.

To the extent of any inconsistency between this Agreement, the Designated Purchaser Agreements, and the General Terms, such agreements will have the following order of precedence: (i) first, this Agreement, (ii) second, the General Terms, and (iii) third, the Designated Purchaser Agreements.

(A) Events of Default as set forth in Section 17 of the General Terms.

(B) Supplier fails to comply with any requirementsof its obligations set forth in Section 8 or Section 9 of this Agreement. and such failure continues for at least thirty (30) Business Days and, if Supplier is diligently pursuing such a cure at the expiration of such thirty (30) Business Day period, Supplier shall be granted an additional thirty (30) Business Day period to effect such cure.

18

(C) Supplier Any LAC Party enters into a Joint Venture contemplated by the provisions of Section 16.7(C)(1) without GM’s prior written consent. In such instance, GM shall have thirty (30) Business Days from the date GM becomes aware of the entry of such a Joint Venture to provide Supplierthe LAC Parties with notice of termination pursuant to this Section 14.1.

(D) SupplierAny LAC Party enters into a Project Sale contemplated by the provisions of Section 16.7(D)(1) without GM’s prior written consent. In such instance, GM shall have thirty (30) Business Days from the date GM becomes aware of such a Project Sale to provide Supplierthe LAC Parties with notice of termination pursuant to this Section 14.1.

(E) Upon the occurrence of a Change of Control of Supplierany LAC Party to a Restricted Person which occurs without the consent of GM. To the extent that the foregoing occurs without the prior written consent of GM, GM shall have thirty (30) Business Days from the date GM becomes aware of the foregoing to provide Supplierthe LAC Parties with notice of termination pursuant to this Section 14.1(E).

Upon the occurrence of an Event of Default by a Party, the non-defaulting Party (i.e. the Parties for the purposes of this Section, being the LAC Parties on the first hand and GM on the second hand) may elect to terminate this Agreement, for cause, in whole or in part, by notice of termination to the defaulting Party.

14.3 Exceptions. For clarity, a “Separation Transaction” as defined in the Master Purchase Agreement is permitted to occur without the consent of GM and, in accordance with Section 7.4 of the Master Purchase Agreement, simultaneous with the occurrence of the Separation Transaction, the Supplier shall assign this Agreement to Spinco pursuant to an agreement under which Spinco assumes in writing all duties and obligations under this Agreement.

19

Any Event of Default by a Designated Purchaser pursuant to the terms of a Designated Purchaser Agreement shall not constitute a default by GM under this Agreement, and shall not constitute grounds for Supplier to terminate this Agreement.

20

21

22

23

24

25

26

27

28

[Signature Page Follows]

29

THEREFORE, the Parties have executed and delivered this Agreement as of the date and year first above written.

EXHIBITS:

Exhibit A: General Terms and Conditions

Exhibit B: Designated Purchaser Agreement

Exhibit C: Phase One Product Specifications

Exhibit D:                                                                                

Exhibit E:                        

Exhibit F:                        

Exhibit G: Summary of Section 2.3 throughto Section 2.7

Exhibit A

General Terms and Conditions

[See attached]

GENERAL TERMS AND CONDITIONS

1. Shipping; Packaging

Supplier will comply, in all respects, with the shipping and packaging requirements agreed to by Buyer and Supplier and as incorporated in this Contract by reference. Supplier will (a) properly pack and mark Product in accordance with the laws and regulations of the country of manufacture, including, without limitation, laws and regulations governing the handling and transportation of dangerous goods or hazardous materials; (b) provide with each shipment packing slips with Buyer’s Contract and/or release number and date of first loading marked thereon; (c) promptly forward the original bill of lading or other shipping documents for each shipment in accordance with Buyer’s instructions; and (d) include on bills of lading or other shipping documents the correct classification of the goods. The marks on each package and identification of the goods on packing slips, bills of lading and invoices (when required) must be sufficient to enable Buyer to easily identify the goods purchased.

2. Transfer of Title

Supplier shall ship the Product FCA ▇▇▇▇▇▇▇ Pass (Incoterms 2020) or FCA an alternate location (an “Alternate Location”) provided in a writing sent from GM to Buyer (in the event Buyer is a Party other than GM) with a copy to Supplier. Title to and risk of loss of the Product shall transfer to Buyer at the time of first loading onto ▇▇▇▇▇’s transport of the Product by Supplier at ▇▇▇▇▇▇▇ Pass or the Alternate Location. All risk for loss of Product after such first loading of the Product by Supplier at ▇▇▇▇▇▇▇ Pass or the Alternate Location shall pass to Buyer and shall not be borne by Supplier.

3. Protection Against Labor Disruptions

Supplier will use its best efforts to ensure the uninterrupted supply of Product to Buyer notwithstanding any existence of a labor disruption.

4. Subcontracting

Neither PartyNone of the Parties will subcontract in whole or in part any of its obligations under this Contract without the prior written consent of the other Party. Any such consent will not release the applicable Party from, or limit, any of such Party’s obligations under this Contract. For clarity, it is understood and agreed that the operation of the ▇▇▇▇▇▇▇ Pass Project, including the loading of finished goods, may entail the use of subcontractors and such use shall not be in breach of this clause.

5. Product Warranty; Warranty of Performance

Supplier warrants and guarantees that the goods sold under this Contract shall be merchantable, conform with all Specifications, and are free and clear of all liens other than those that may arise by operation of law, that the goods will be released in connection with the Certificate of Analysis (“COA”) that Supplier will provide with all deliveries of goods to Buyer, and will comply with applicable laws (the “Warranty”). The Warranty (other than being merchantable and free and clear of all liens other than those that may arise by operation of law) does not extend to Off Spec Product

that is retained by Buyer. The duration of the Warranty will begin on the date the title and risk of loss for such goods passes to Buyer in accordance with Section 2 of this Contract (the “Title Transfer Date”) and end on the earlier of (the “Warranty End Date”): (a) 12 months from the Title Transfer Date; or (b) upon incorporation of such goods into another product of Buyer to the extent such incorporation alters the goods so as to make the analysis required to validate the COA unachievable. Other than in the event of Supplier’s gross negligence or willful, wanton, or reckless misconduct, after the Warranty End Date, Supplier shall not be required to accept any claim with respect to the Warranty. ▇▇▇▇▇ agrees that to the extent practicable it shall notify Supplier within fifteen (15) Business Days of becoming aware that a Warranty Claim may be alleged by ▇▇▇▇▇. Except as expressly set forth in this Contract, the Warranty is irrevocable by Supplier, and Supplier may not limit or disclaim the Warranty.

In the event Buyer provides written notification to Supplier (the “Specification Notice”) of variation of Product from the Specifications, with such notice to be delivered within the later of: (a)    days of title passing from Supplier to Buyer as provided in Section 2; or (b) if the Product was stored unused at a facility reasonably acceptable to Supplier, within   days of the date the Product is removed from such storage (the “Cut Off Date”), Buyer shall not be obligated to purchase and take delivery of the relevant shipment; provided, however, Supplier and Buyer will consult each other and shall negotiate in good faith (for a period of five (5) Business Days after the date of delivery of the Specification Notice) whether Buyer will accept the Product with appropriate price reductions (the “Off Spec Product”) or whether Buyer shall return the Off Spec Product to Supplier at ▇▇▇▇▇▇▇ Pass (or the Alternate Location if loaded at the Alternate Location), such return to be at the cost and expense of Supplier. If such negotiations do not culminate in agreement after the end of such period of five (5) Business Days after the date of delivery of the Specification Notice, Buyer shall immediately return the Off Spec Product to Supplier, such return to be at the cost and expense of Supplier. In all cases, Buyer and Supplier will work together in good faith to minimize return shipping costs. In the event Buyer provides Supplier with a Specification Notice after Buyer has paid for the Product, and such Product is returned to Supplier in accordance with this Section 5, Buyer shall receive either a refund of the amount paid for the Product or a credit from Supplier in the amount that was paid for the Product, provided, however, that if Supplier has replacement Product available, Buyer may elect to receive replacement Product instead of the refund or credit.

Product to be delivered hereunder (with the exception of Off Spec Product that is accepted by Buyer) shall not: (i) contain extraneous materials; (ii) contain elements or substances at levels or in concentrations dangerous or harmful to health, safety, the environment or generally considered in the lithium industry to be deleterious or harmful or (iii) exhibit physical properties or characteristics which differ from industry standards for comparable products in the marketplace to a degree or in a manner which results in Buyer having to incur increased costs of transporting, storing or handling the Product (collectively, the “Prohibited Characteristics”). For greater certainty, the presence in Product of any element or compound in quantities within the ranges specified in the Product Specifications shall not constitute a Prohibited Characteristic. Both Parties understand the hazards and handling of the Product and will follow industry and local governmental practices and standards for handling.

6. Ingredients Disclosure; Special Warnings and Instructions

At least ten (10) Business Days prior to, as well as in connection with, the shipment of the Product from ▇▇▇▇▇▇▇ Pass or the Alternate Location, as the case may be, Supplier agrees to furnish to Buyer written warning and notice (including, without limitation, appropriate labels on the goods, containers and packing) of any dangerous goods or hazardous material that forms part of any shipment of Products, together with such special handling instructions as may be necessary to advise carriers, Buyer, and their respective employees of how to exercise that measure of care and precaution that will comply with any applicable laws or regulations and best prevent bodily injury or property damage in the handling, transportation, processing, use or disposal of the Products, containers and packing shipped to Buyer from ▇▇▇▇▇▇▇ Pass or the Alternate Location.

7. Payment

Promptly after each shipment of goods from ▇▇▇▇▇▇▇ Pass or the Alternate Location, as the case may be, Supplier will issue a single invoice for the shipped Products. Each invoice must comply with applicable law, if any, and include the following information: (a) amount due (in the currency specified in this Contract); (b) Contract number; (c) if applicable, purchase order number; (d) if applicable, the intra-EU VAT number; and (e) net weight of the goods.

Buyer will pay for the Product in accordance with the payment terms and in the currency specified elsewhere in this Contract. Payments may be made electronically (including, without limitation, by bank transfer or recorded bill of exchange, where applicable).

8. Customs; Origin

Credits or benefits resulting or arising from this Contract, including trade credits, export credits or the refund of duties, taxes or fees, will belong to Buyer to the extent Buyer pays such duties, taxes or fees directly or those duties, taxes, or fees are passed along to Buyer in the contract price. To the extent Supplier pays and does not pass along to Buyer such duties, taxes or fees, any applicable credits or refunds will belong to Supplier. Supplier will timely and accurately provide all information necessary (including written documentation and electronic transaction records) to permit Buyer to receive such benefits or credits, if Buyer pays such duties, taxes or fees either directly or indirectly, as well as to fulfill its import and, where required by this Contract, export customs related obligations, origin marking or labeling requirements and local content origin requirements, if any. Supplier will undertake such arrangements as necessary for the goods to be covered by any duty deferral or free trade zone program(s) of the country of import. Supplier will ensure compliance with the recommendations or requirements of all applicable Authorized Economic Operator (AEO), governmental security/anti-terrorism and enhanced border release programs (including, without limitation, the United States Bureau of Customs and Border Protection’s Customs-Trade Partnership Against Terrorism (C-TPAT)). At the request of Buyer or the appropriate Customs Authority, Supplier will certify in writing its compliance with the foregoing.

9. Transactional Tax

Unless otherwise provided in this Contract, the prices set forth in this Contract will be exclusive of all transactional taxes, including any sales, use, excise, services, value added tax, goods and services tax, or similar tax, and these taxes should be separately identified by Supplier in Supplier’s invoice, even if the tax rate is zero. Buyer will not be responsible for any transactional taxes charged by the Supplier that are not identified in this manner. Supplier shall separately state all charges for transactional taxes on its invoices (or other such documents). Additionally, Supplier shall provide Buyer with invoices in line with the applicable tax laws in its country to enable the Buyer to reclaim the transactional taxes and Supplier will provide such documentation no later than when the payment to which the invoice relates is due from Buyer. Supplier will be responsible for remitting the transactional tax to the applicable taxing authority except for those states or jurisdictions where Buyer has provided Supplier with an appropriate exemption certificate. Supplier will use reasonable efforts to apply for such exemptions where applicable. Supplier will not charge Buyer for any transactional taxes charged by a subcontracting supplier if such tax is recoverable by Supplier, or if not recoverable, it would have been, had the transaction been structured through other entities (either the Supplier’s or the Buyer’s affiliated companies). If transactional taxes are not recoverable by Supplier, Supplier agrees to provide detailed billing, customs or other documents as requested, which set out the transactional taxes paid or payable to any of the Buyer’s subcontracting supplier or to a taxing authority.

10. Intellectual Property Indemnification

SupplierThe LAC Parties will investigate, defend, hold harmless and indemnify Buyer, its successors, its affiliates (collectively “Buyer Group”) and its dealers and customers against any actual or alleged claims of infringement or other assertions of proprietary rights violations (including patent, trademark, copyright, industrial design right, or other proprietary right, misuse, or misappropriation of trade secret) and resulting damages and expenses (including attorney’s and other professional fees) arising in any way in relation to the Products (collectively “IP claims”). Supplier The LAC Parties expressly waives any claim against Buyer Group that any such IP claims arose out of compliance with Buyer Group’s or its dealers’ or customers’ specification or direction.

11. Remedies; Indemnity

The rights and remedies reserved to each Party in this Contract are cumulative with, and additional to, all other rights and remedies of each Party under applicable law or in equity. It is understood and agreed that for the purposes of this Section 11 (Remedies; Indemnity), Section 12 (Force Majeure), Section 15 (Confidentiality), Section 16 (Compliance with Laws), Section 17 (Termination For Cause) and Section 18 (Governing Law and Jurisdiction), LAC Parent and Supplier act as one Party.

Notwithstanding anything else to the contrary in this Contract, and save in respect of: (i) liability for fraud, death or personal injury caused by gross negligence or willful misconduct; or (ii) liability for infringement or other proprietary rights violations (including patent, trademark, copyright, industrial design right, or other proprietary right, misuse, or misappropriation of trade secret) arising in any way in relation to the Product, neither Party shall in any circumstances be liable to the other Party as a result of its performance of, or failure to perform, this Contract or any provision in this Contract, whether in contract, tort or breach of statutory duty or howsoever arising for (a) any loss of profit, anticipated profit or revenue (with respect to the foregoing, save and except for failures by Buyer to make payments for Product as anticipated by this Contract, the losses for which are specifically not excluded and are included), any loss of savings or anticipated savings, any loss of production, any loss of use, any loss of contract or business opportunity, any loss of or damage to goodwill or any business interruption, whether of a direct or indirect nature, (b) any special, indirect and/or consequential losses, or (c) punitive, exemplary or special damages.

Each Party (a “First Party”) will indemnify, defend and hold harmless the other Party against any liability, claim, demand and expense (including, without limitation, legal and other professional fees) arising from or relating to any failure of the First Party to fully perform any of its obligations under this Contract.

12. Force Majeure

Any delay or failure of either Party to perform its obligations under this Contract will be excused to the extent that Supplier is unable to produce, sell or deliver, or Buyer is unable to accept delivery, buy or use, the goods or services covered by this Contract, directly as the result of an event or occurrence beyond the reasonable control of such Party, without such Party’s fault or negligence (a “force majeure event”), including, if applicable, actions by any governmental authority (whether valid or invalid), fires, floods, windstorms, explosions, riots, natural disasters, wars and sabotage; provided that written notice of such force majeure event (including the anticipated duration of the delay) must be given by the affected Party to the other Party as soon as possible (but in no event more than 20 days after the force majeure event occurs).

During any force majeure event affecting Supplier’s performance, Buyer may, at its sole option: (i) purchase Product from other sources, without liability to Supplier; and/or (ii) reduce the volumes set forth in any forecast by the amount of Product purchased from such other sources; provided that Supplier may sell Product to third parties to the extent of such Buyer purchases from other sources.

The affected Party will use all diligent efforts to ensure that the effects of any force majeure event are minimized and, as promptly as possible, resume full performance under this Contract. If the delay lasts more than      months from notice of the force majeure event being given, either Party may immediately terminate this Contract without liability to either Party.

13. Insurance

Supplier will maintain insurance coverage as would a prudent mine operator in the State of Nevada. Supplier shall insure its interest in the Product for full value for damage or loss arising until title and risk pass to the Buyer as provided in Section 2 with an insurance company rated ‘A-’ or higher by AM Best.

14. Technical Information

Buyer does not expect to receive any confidential technical or other information (the “Non- ContractNon-Contract Information”) from Supplierthe LAC Parties, and Buyer will not be subject to confidentiality or nondisclosure obligations with respect to any such information (including under Section 15 hereof) unless Supplierthe LAC Parties and Buyer have agreed to confidentiality and nondisclosure obligations in a writing signed by their respective authorized representatives that expressly applies to such Non-ContractNon-Contract Information (a “Standalone CA”). Supplier agrees The LAC Parties agree not to assert any claim (other than for breach of a Standalone CA) with respect to any Non-ContractNon-Contract Information that Supplier hasthe LAC Parties have disclosed or may hereafter disclose to Buyer or its affiliates and subsidiaries.

15. Confidentiality; No Advertising

The Parties agree that the contents of this Contract are confidential and not intended for use or dissemination by either Party without the express written consent of the other Party. For the purposes of this Section 15 a Party making disclosure together with its affiliates and representatives is a “Disclosing Party” and the non-Disclosing Party is an “Affected Party”.

A Disclosing Party may disclose the existence and terms of this Contract (the “Disclosure Exceptions”): (i) to the extent required by law (including the rules of any applicable stock exchange), or by any governmental agency or required or requested to be disclosed pursuant to legal process (including discovery requests) or in connection with any bankruptcy, insolvency, or similar proceeding involving either of the Parties, provided that the Disclosing Party shall (A) immediately upon receiving notice that it is required to make a disclosure under law or stock exchange rules, give the Affected Party prior written notice and an opportunity of not less than 48 hours for the Affected Party to review and comment on the requisite disclosure before it is made, including an opportunity for the Affected Party to prevent such disclosure, (B) use its best efforts to incorporate the Affected Party’s comments or limit such disclosure, by seeking confidential treatment or otherwise, and (C) promptly provide the Affected Party with notice of any requirement to provide any such information, regardless of when such disclosure shall be made; (ii) to the extent necessary to enforce this Contract including, without limitation, for the purposes of dispute resolution as set forth in Section 18; (iii) to any designated purchaser, employee, officer, director, agent, affiliate, representative, lawyer, investor, broker, potential transferee, financier, partner, member, shareholder or actual or potential financing source of the Disclosing Party or that Disclosing Party’s affiliates (but not its representatives) provided that any such person or entity must be, prior to the disclosure, subject to confidentiality obligations that are the same as or more restrictive than the confidentiality obligations in this Contract and that the Disclosing Party disclosing such information to them will be responsible for any breach thereof; and (iv) to the extent such information is or becomes generally available to the public other than as a result of a disclosure by the Disclosing Party in violation of this Contract.

Unless required by applicable law or pursuant to any rules or regulations of any applicable securities exchange, neither Party will in any manner, without first obtaining the other Party’s consent, which consent will not be unreasonably withheld or delayed: (i) advertise or publish the fact that Supplier has contracted to furnish Buyer the Product; (ii) use the other Party’s trademarks, trade names or confidential information in such Party’s advertising or promotional materials; or (iii) use the other Party’s trademarks, trade names or confidential information in any form of electronic communication such as web sites (internal or external), blogs or other types of postings, except as may be required to perform hereunder or as required by law. Any announcement made by the Parties in relation to the execution of this Contract will be agreed in advance by the Parties.

16. Compliance with Laws

Supplier, and any goods or services supplied by Supplier, and Buyer, in connection with its obligations under this Contract, will comply with all applicable laws, rules, regulations, orders, conventions, ordinances or standards of the country(ies) of destination or that relate to the manufacture, labeling, transportation, importation, exportation, licensing, approval or certification of the Product, including, without limitation, those relating to environmental matters, the handling and transportation of dangerous goods or hazardous materials, data protection and privacy, wages, hours and conditions of employment, subcontractor selection, discrimination, occupational health/safety and motor vehicle safety. Supplier, in all respects, and Buyer, in connection with its obligations under this Contract, further represent that neither they nor any of their subcontractors, vendors, agents or other associated third parties will utilize child, slave, prisoner or any other form of forced or involuntary labor, or engage in abusive employment or corrupt business practices, in the supply of Product under this Contract. Supplier, in all respects, and Buyer, in connection with its obligations under this Contract, agree to comply with all applicable anti-corruption laws, including, without limitation, the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, and that neither they nor any of their subcontractors, vendors, agents or other associated third parties will engage in any form of commercial bribery, nor directly or indirectly provide or offer to provide, anything of value to or for the benefit of, any official or employee of a governmental authority or of any government-owned, government-controlled or government-affiliated entity to obtain or retain any contract, business opportunity or other business benefit, or to influence any act or decision of that person in his/her official capacity. At Buyer’s request, Supplier will certify in writing its compliance with the foregoing.

17. Termination for Cause

Upon the occurrence of any of the following “Events of Default” by a Party, the non-defaulting Party may elect to terminate this Contract, in whole or in part, by notice of termination to the defaulting Party and the expiration of any applicable cure period provided below: (a) Either Party repudiates or materially breaches its obligations, or refuses to materially perform its obligations, under this Contract, and if such breach is capable of being cured within twenty (20) Business Days, such breach is not cured by the breaching Party within twenty (20) Business Days of written notice of the occurrence of an Event of Default being provided by the other Party; or (b) Any secured or lien creditor commences a foreclosure action of its liens, security interests and/or mortgages in or against a material portion of a Party’s assets or a Party: (A) commences, or has commenced against it, any case, proceeding or other action under Title 11 of the United States Code or any other liquidation, bankruptcy, conservatorship, moratorium, receivership, insolvency, rearrangement, reorganization or similar debtor relief laws of the United States or any other applicable jurisdictions in effect from time to time, seeking (i) to have an order for relief entered with respect to it, (ii) to adjudicate it as bankrupt or insolvent, (iii) to commence or implement any plan of reorganization, arrangement, adjustment, winding-up, liquidation, dissolution, composition or other relief with respect to it or its debts or (iv) the appointment of a receiver, trustee, custodian, conservator or other similar official for it or for all or any substantial part of its assets; or (B) makes a general assignment for the benefit of its creditors (collectively, an “Insolvency Event”).

18. Governing Law and Jurisdiction

This Contract shall be governed by the laws of the State of New York, excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods (CISG), and without regard to its conflict of laws principles. Any action, dispute or proceeding seeking to enforce any provision of, or based on any right arising solely out of, this Contract (collectively, “Disputes”) shall be first handled pursuant to the following escalation process. Any Party may submit its position on any Dispute in writing to the other Party and such other Party shall, within five (5) Business Days thereafter, submit its position on the Dispute in writing to the first Party. As promptly as practicable, but no later than five (5) Business Days thereafter, the Parties shall enter into good faith negotiations to attempt to resolve the Dispute. If those negotiations do not resolve the Dispute within fifteen (15) Business Days after the first Party’s submission, then either Party may require that the Dispute be submitted, in writing to ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇, Vice President of Global Purchasing and Supply Chain of Buyer and ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ of Supplier (or, in each case, their functional successors), who shall negotiate in good faith and use their reasonable best efforts to expeditiously resolve the Dispute for a period of fifteen (15) Business Days after that submission, unless ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇, Vice President of Global Purchasing and Supply Chain of ▇▇▇▇▇ and ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ of Supplier (or in each case their functional successors) mutually agree to extend such period of negotiation. Any agreement pertaining to a Dispute shall be reduced to writing, be signed by the Parties and be final and binding upon the Parties. All negotiations pursuant to this Section 18 shall be confidential, and shall be treated as compromise and settlement negotiations for purposes of applicable rules of evidence. In the event that a Dispute has not been resolved after the use of the escalation procedures set forth above, then either Party may initiate the arbitration process. The Dispute shall be submitted to and settled by binding arbitration in New York, New York in accordance with the Administered Arbitration Rules of the International Institute for Conflict Prevention & Resolution, and such arbitration shall be in English. For disputes that involve alleged losses that do not exceed $  million, the Parties shall mutually agree on a single arbitrator within a period of five (5) Business Days of receipt of notice that the other Party has referred a Dispute to arbitration, and if the Parties cannot agree upon the single arbitrator within such period of five (5) Business Days, the single arbitrator shall be appointed as promptly as practicable by the International Institute for Conflict Prevention & Resolution. For disputes that involve alleged losses that exceed $  million, each Party shall, within five (5) Business Days of receipt of notice that the other Party has referred a Dispute to arbitration, appoint one nominating arbitrator and such nominating arbitrators shall together select within five (5) Business Days a neutral arbitrator who will conduct the arbitration. If such nominating arbitrators are not able to select a neutral arbitrator, the neutral arbitrator shall be appointed as promptly as practicable by the International Institute for Conflict Prevention & Resolution. The costs of the arbitrator shall be in the cause. The single arbitrator or the one neutral arbitrator shall make a decision within sixty (60) days of the arbitrator’s appointment. The arbitrator shall not be empowered to award punitive or exemplary damages. The award rendered by the arbitrator shall be final and binding upon the Parties, and the judgement on the award rendered may be entered in any court having jurisdiction thereof. All Disputes shall be settled in this manner in lieu of an action at law or equity; provided, however, that nothing in this Section 18 shall be construed as precluding the bringing of an action for temporary or preliminary injunctive relief or other equitable relief. Each Party hereby irrevocably and unconditionally (i) waives any objection to the laying of venue of any such action, suit or proceeding in any such court, (ii) agrees not to plead or claim in any such court that any such action, suit or proceeding brought in any such court has been brought in an inconvenient forum and (iii) agrees that service of any court paper may be effected on such Party in any manner as may be provided under applicable laws or court rules of the State of New York.

Exhibit B

Designated Purchaser Agreement

[See attached]

DESIGNATED PURCHASER AGREEMENT

This Designated Purchaser Agreement (this “Agreement”) is dated , 202_ (“Effective Date”) and is between Lithium Nevada Corp. (“Supplier”) and (“Purchaser”). Supplier and Purchaser hereinafter may be referred to individually as a “Party” or together as the “Parties.”

Recitals

WHEREAS, General Motors Holdings LLC (on behalf of itself and its affiliates and subsidiaries, collectively, “GM”) and Supplier are parties to a purchase contract (the “Offtake Agreement”) pursuant to which Supplier manufactures and supplies lithium carbonate (the “Products”) that meets the Specifications (as defined below) for use in lithium-ion batteries manufactured for GM and to be incorporated by GM into vehicles produced in North America (“Batteries”);

WHEREAS, GM and Purchaser are parties, directly or indirectly, to a purchase contract pursuant to which purchaser supplies to GM components for Batteries (the “GM-PurchaserGM-Purchaser Contract”), which contract has not been and shall not be seen by Supplier and so no implication in and to Supplier can be derived therefrom;

WHEREAS, GM and Purchaser have agreed, in connection with the GM-PurchaserGM-Purchaser Contract, that GM may designate Purchaser as a Designated Purchaser (as defined in the Offtake Agreement) under the Offtake Agreement, which such Offtake Agreement has not been and shall not be seen by Purchaser and so no implication in and to Purchaser can be derived therefrom;

WHEREAS, Purchaser desires to purchase and Supplier desires to sell to Purchaser the Products; and

WHEREAS, Supplier and Purchaser agree to respectively sell and buy the Products on the terms set forth in this Agreement and all exhibits hereto including, but not limited to, the General Terms and Conditions attached hereto as Exhibit A (the “General Terms and Conditions”).

Agreement

The Parties agree as follows:

1. Term and Termination. This Agreement shall become effective on the Effective Date and shall terminate upon notice to Purchaser from GM or Supplier of the earlier to occur of (a) expiration or termination of the Offtake Agreement; (b) termination by GM of Purchaser’s designation as a Designated Purchaser under the Offtake Agreement; or (c) revocation by Supplier of Purchaser’s approval as a Designated Purchaser under the Offtake Agreement (the “Term”). Any payment obligations owing from Purchaser to Supplier for Products pursuant to this Agreement shall survive the termination of this Agreement.

2. Specifications. The specifications for the Products (the “Specifications”) are attached hereto as Annex A. Any new Specifications, and any modifications or amendments to the Specifications shall be communicated by GM to Supplier and Purchaser.

3. Quantity. Purchaser shall purchase from Supplier the quantity of Product directed by GM for Purchaser’s use in Battery components for GM vehicles. Purchaser may only use Products purchased pursuant to this Agreement for production of Battery components for GM and not for any other use or purpose.

4. Pricing. The price of Products (the “Product Price”) received by Purchaser during any calendar year quarter during the Term will be communicated by GM to Purchaser. The Product Price will be exclusive of any applicable sales or other similar tax, if any, that is required by law to be added to the sales price. Any adjustments to the Product Price will be prospective only and in no event will Purchaser be obligated to pay any retrospective price increase.

5. Ordering Process. Purchaser may from time to time submit purchase orders— including blanket purchase orders—to Supplier (the “Purchase Orders”) and issue releases for Products to Supplier.¹ This Agreement, including any exhibits hereto, shall be expressly incorporated into any Purchase Orders.

6. Payment Terms. Purchaser shall pay for all Products purchased hereunder net      days after Purchaser’s receipt of the Products at Purchaser’s facility but not later than       days after first loading of the Product at ▇▇▇▇▇▇▇ Pass or the Alternate Location (as defined in the General Terms and Conditions). If any payment due under this Agreement is not paid when due in accordance with the applicable provisions of this Agreement, and Supplier has provided written notice of such non-payment to Purchaser and Purchaser has failed to cure such non-payment within five (5) Business Days of receipt of such notice from Supplier, Supplier shall have the right to suspend, without any prejudice to any of Supplier’s other rights and remedies under this Agreement, any ongoing supply of Product under this Agreement until such payment is made.

7. Access to Information. Purchaser will have access and information rights to Supplier’s ▇▇▇▇▇▇▇ Pass location. To the extent Purchaser wishes to exercise such rights, Purchaser shall coordinate the exercise of such rights with GM. In the event of any site visit by Purchaser, Purchaser will comply with all health and safety regulations of Supplier.

8. Non-AssignmentNon-Assignment. Under no circumstances may Purchaser transfer, assign or delegate, in whole or in part, any of its rights or obligations under this Agreement (including, without limitation, any right of payment), whether directly or indirectly, by merger, acquisition or contribution to a joint venture. Supplier may transfer, assign or delegate, in whole or in part, any of its rights or obligations under this Agreement (including, without limitation, any right of payment), whether directly or indirectly, solely in connection with an assignment of its rights pursuant to the Offtake Agreement, and Supplier shall provide Purchaser with written notice of any such assignment within five (5) business days thereof.

2

9. Authority. Each of the representatives executing this Agreement on behalf of the Parties represents and warrants that he or she possesses the corporate power and authority to execute this Agreement on behalf of the respective Parties and that this Agreement has been duly authorized by the Parties. Each of the Parties represents and warrants that the execution and delivery by that Party of this Agreement, or compliance or performance by that Party with any of the provisions of this Agreement will not conflict with, or result in any violation or breach of, or default (with or without notice or lapse of time, or both) under any provision of the certificate of incorporation and by-lawsby-laws or comparable organizational documents of that Party, any material contract of that Party, any judicial order applicable to that Party, or any applicable law, in each case, in existence as of the Effective Date.

10. Order of Preference. In the event of a conflict between or among any document relating to this Agreement, the applicable document will prevail as follows: (i) this Agreement; (ii) any Purchase Order in written form confirmed by Supplier; (iii) the General Terms and Conditions; and (iv) any other exhibits or schedules attached to and incorporated into the foregoing.

11. No Contra Proferentem. The Parties are competent and experienced in business, and have negotiated and reviewed this Agreement with their counsel. Any ambiguous language in this Agreement should therefore not be construed against either Party as the drafter of that language.

12. REPRESENTATIONS. THE PARTIES ACKNOWLEDGE THAT THEY HAVE BEEN GIVEN THE OPPORTUNITY TO CONSULT WITH COUNSEL OF THEIR CHOICE BEFORE EXECUTING THIS AGREEMENT AND ARE DOING SO WITHOUT DURESS, INTIMIDATION, OR COERCION AND WITHOUT RELIANCE UPON ANY REPRESENTATIONS, WARRANTIES, OR COMMITMENTS OTHER THAN THOSE REPRESENTATIONS, WARRANTIES, OR COMMITMENTS SET FORTH IN THIS AGREEMENT.

13. Miscellaneous.

3

14. Interpretation.

4

[Signature Page to Follow]

5

IN WITNESS WHEREOF, each of the undersigned, intending to be legally bound, hereby executes this Agreement as of the Effective Date.

[Signature Page to the Designated Purchaser Agreement]

Annex A

Specifications

Packaging Specifications for Lithium Carbonate:

1

Exhibit A

General Terms and Conditions

[See attached]

2

GENERAL TERMS AND CONDITIONS

1. Shipping; Packaging

Supplier will comply, in all respects, with the shipping and packaging requirements agreed to by Buyer and Supplier and as incorporated in this Contract by reference. Supplier will (a) properly pack and mark Product in accordance with the laws and regulations of the country of manufacture, including, without limitation, laws and regulations governing the handling and transportation of dangerous goods or hazardous materials; (b) provide with each shipment packing slips with Buyer’s Contract and/or release number and date of first loading marked thereon; (c) promptly forward the original bill of lading or other shipping documents for each shipment in accordance with Buyer’s instructions; and (d) include on bills of lading or other shipping documents the correct classification of the goods. The marks on each package and identification of the goods on packing slips, bills of lading and invoices (when required) must be sufficient to enable Buyer to easily identify the goods purchased.

2. Transfer of Title

Supplier shall ship the Product FCA ▇▇▇▇▇▇▇ Pass (Incoterms 2020) or FCA an alternate location (an “Alternate Location”) provided in a writing sent from GM to Buyer (in the event Buyer is a Party other than GM) with a copy to Supplier. Title to and risk of loss of the Product shall transfer to Buyer at the time of first loading onto ▇▇▇▇▇’s transport of the Product by Supplier at ▇▇▇▇▇▇▇ Pass or the Alternate Location. All risk for loss of Product after such first loading of the Product by Supplier at ▇▇▇▇▇▇▇ Pass or the Alternate Location shall pass to Buyer and shall not be borne by Supplier.

3. Protection Against Labor Disruptions

Supplier will use its best efforts to ensure the uninterrupted supply of Product to Buyer notwithstanding any existence of a labor disruption.

4. Subcontracting

Neither PartyNone of the Parties will subcontract in whole or in part any of its obligations under this Contract without the prior written consent of the other Party. Any such consent will not release the applicable Party from, or limit, any of such Party’s obligations under this Contract. For clarity, it is understood and agreed that the operation of the ▇▇▇▇▇▇▇ Pass Project, including the loading of finished goods, may entail the use of subcontractors and such use shall not be in breach of this clause.

5. Product Warranty; Warranty of Performance

Supplier warrants and guarantees that the goods sold under this Contract shall be merchantable, conform with all Specifications, and are free and clear of all liens other than those that may arise by operation of law, that the goods will be released in connection with the Certificate of Analysis (“COA”) that Supplier will provide with all deliveries of goods to Buyer, and will comply with applicable laws (the “Warranty”). The Warranty (other than being merchantable and free and clear of all liens other than those that may arise by operation of law) does not extend to Off Spec Product

3

that is retained by Buyer. The duration of the Warranty will begin on the date the title and risk of loss for such goods passes to Buyer in accordance with Section 2 of this Contract (the “Title Transfer Date”) and end on the earlier of (the “Warranty End Date”): (a) 12 months from the Title Transfer Date; or (b) upon incorporation of such goods into another product of Buyer to the extent such incorporation alters the goods so as to make the analysis required to validate the COA unachievable. Other than in the event of Supplier’s gross negligence or willful, wanton, or reckless misconduct, after the Warranty End Date, Supplier shall not be required to accept any claim with respect to the Warranty. ▇▇▇▇▇ agrees that to the extent practicable it shall notify Supplier within fifteen (15) Business Days of becoming aware that a Warranty Claim may be alleged by ▇▇▇▇▇. Except as expressly set forth in this Contract, the Warranty is irrevocable by Supplier, and Supplier may not limit or disclaim the Warranty.

In the event Buyer provides written notification to Supplier (the “Specification Notice”) of variation of Product from the Specifications, with such notice to be delivered within the later of: (a)    days of title passing from Supplier to Buyer as provided in Section 2; or (b) if the Product was stored unused at a facility reasonably acceptable to Supplier, within   days of the date the Product is removed from such storage, but in any event not later than the Warranty End Date (the “Cut Off Date”), Buyer shall not be obligated to purchase and take delivery of the relevant shipment; provided, however, Supplier and Buyer will consult each other and shall negotiate in good faith (for a period of five (5) Business Days after the date of delivery of the Specification Notice) whether Buyer will accept the Product with appropriate price reductions (the “Off Spec Product”) or whether Buyer shall return the Off Spec Product to Supplier at ▇▇▇▇▇▇▇ Pass (or the Alternate Location if loaded at the Alternate Location), such return to be at the cost and expense of Supplier. If such negotiations do not culminate in agreement after the end of such period of five (5) Business Days after the date of delivery of the Specification Notice, Buyer shall immediately return the Off Spec Product to Supplier, such return to be at the cost and expense of Supplier. In all cases, Buyer and Supplier will work together in good faith to minimize return shipping costs. In the event Buyer provides Supplier with a Specification Notice after Buyer has paid for the Product, and such Product is returned to Supplier in accordance with this Section 5, Buyer shall receive either a refund of the amount paid for the Product or a credit from Supplier in the amount that was paid for the Product, provided, however, that if Supplier has replacement Product available, Buyer may elect to receive replacement Product instead of the refund or credit.

Product to be delivered hereunder (with the exception of Off Spec Product that is accepted by Buyer) shall not: (i) contain extraneous materials; (ii) contain elements or substances at levels or in concentrations dangerous or harmful to health, safety, the environment or generally considered in the lithium industry to be deleterious or harmful or (iii) exhibit physical properties or characteristics which differ from industry standards for comparable products in the marketplace to a degree or in a manner which results in Buyer having to incur increased costs of transporting, storing or handling the Product (collectively, the “Prohibited Characteristics”). For greater certainty, the presence in Product of any element or compound in quantities within the ranges specified in the Product Specifications shall not constitute a Prohibited Characteristic. Both Parties understand the hazards and handling of the Product and will follow industry and local governmental practices and standards for handling.

4

6. Ingredients Disclosure; Special Warnings and Instructions

At least ten (10) Business Days prior to, as well as in connection with, the shipment of the Product from ▇▇▇▇▇▇▇ Pass or the Alternate Location, as the case may be, Supplier agrees to furnish to Buyer written warning and notice (including, without limitation, appropriate labels on the goods, containers and packing) of any dangerous goods or hazardous material that forms part of any shipment of Products, together with such special handling instructions as may be necessary to advise carriers, Buyer, and their respective employees of how to exercise that measure of care and precaution that will comply with any applicable laws or regulations and best prevent bodily injury or property damage in the handling, transportation, processing, use or disposal of the Products, containers and packing shipped to Buyer from ▇▇▇▇▇▇▇ Pass or the Alternate Location.

7. Payment

Promptly after each shipment of goods from ▇▇▇▇▇▇▇ Pass or the Alternate Location, as the case may be, Supplier will issue a single invoice for the shipped Products. Each invoice must comply with applicable law, if any, and include the following information: (a) amount due (in the currency specified in this Contract); (b) Contract number; (c) if applicable, purchase order number; (d) if applicable, the intra-EU VAT number; and (e) net weight of the goods.

Buyer will pay for the Product in accordance with the payment terms and in the currency specified elsewhere in this Contract. Payments may be made electronically (including, without limitation, by bank transfer or recorded bill of exchange, where applicable).

8. Customs; Origin

Credits or benefits resulting or arising from this Contract, including trade credits, export credits or the refund of duties, taxes or fees, will belong to Buyer to the extent Buyer pays such duties, taxes or fees directly or those duties, taxes, or fees are passed along to Buyer in the contract price. To the extent Supplier pays and does not pass along to Buyer such duties, taxes or fees, any applicable credits or refunds will belong to Supplier. Supplier will timely and accurately provide all information necessary (including written documentation and electronic transaction records) to permit Buyer to receive such benefits or credits, if Buyer pays such duties, taxes or fees either directly or indirectly, as well as to fulfill its import and, where required by this Contract, export customs related obligations, origin marking or labeling requirements and local content origin requirements, if any. Supplier will undertake such arrangements as necessary for the goods to be covered by any duty deferral or free trade zone program(s) of the country of import. Supplier will ensure compliance with the recommendations or requirements of all applicable Authorized Economic Operator (AEO), governmental security/anti-terrorism and enhanced border release programs (including, without limitation, the United States Bureau of Customs and Border Protection’s Customs-Trade Partnership Against Terrorism (C-TPAT)). At the request of Buyer or the appropriate Customs Authority, Supplier will certify in writing its compliance with the foregoing.

5

9. Transactional Tax

Unless otherwise provided in this Contract, the prices set forth in this Contract will be exclusive of all transactional taxes, including any sales, use, excise, services, value added tax, goods and services tax, or similar tax, and these taxes should be separately identified by Supplier in Supplier’s invoice, even if the tax rate is zero. Buyer will not be responsible for any transactional taxes charged by the Supplier that are not identified in this manner. Supplier shall separately state all charges for transactional taxes on its invoices (or other such documents). Additionally, Supplier shall provide Buyer with invoices in line with the applicable tax laws in its country to enable the Buyer to reclaim the transactional taxes and Supplier will provide such documentation no later than when the payment to which the invoice relates is due from Buyer. Supplier will be responsible for remitting the transactional tax to the applicable taxing authority except for those states or jurisdictions where Buyer has provided Supplier with an appropriate exemption certificate. Supplier will use reasonable efforts to apply for such exemptions where applicable. Supplier will not charge Buyer for any transactional taxes charged by a subcontracting supplier if such tax is recoverable by Supplier, or if not recoverable, it would have been, had the transaction been structured through other entities (either the Supplier’s or the Buyer’s affiliated companies). If transactional taxes are not recoverable by Supplier, Supplier agrees to provide detailed billing, customs or other documents as requested, which set out the transactional taxes paid or payable to any of the Buyer’s subcontracting supplier or to a taxing authority.

10. Intellectual Property Indemnification

SupplierThe LAC Parties will investigate, defend, hold harmless and indemnify Buyer, its successors, its affiliates (collectively “Buyer Group”) and its dealers and customers against any actual or alleged claims of infringement or other assertions of proprietary rights violations (including patent, trademark, copyright, industrial design right, or other proprietary right, misuse, or misappropriation of trade secret) and resulting damages and expenses (including attorney’s and other professional fees) arising in any way in relation to the Products (collectively “IP claims”). Supplier expressly waives any claim against Buyer Group that any such IP claims arose out of compliance with Buyer Group’s or its dealers’ or customers’ specification or direction.

11. Remedies; Indemnity

It is understood and agreed that for the purposes of this Section 11 (Remedies; Indemnity), Section 12 (Force Majeure), Section 15 (Confidentiality), Section 16 (Compliance with Laws), Section 17 (Termination For Cause) and Section 18 (Governing Law and Jurisdiction), LAC Parent and Supplier act as one Party. The rights and remedies reserved to each Party in this Contract are cumulative with, and additional to, all other rights and remedies of each Party under applicable law or in equity.

Notwithstanding anything else to the contrary in this Contract, and save in respect of: (i) liability for fraud, death or personal injury caused by gross negligence or willful misconduct; or (ii) liability for infringement or other proprietary rights violations (including patent, trademark, copyright, industrial design right, or other proprietary right, misuse, or misappropriation of trade secret) arising in any way in relation to the Product, neither Party shall in any circumstances be liable to the other Party as a result of its performance of, or failure to perform, this Contract or any provision in this Contract, whether in contract, tort or breach of statutory duty or howsoever arising for (a) any loss of profit, anticipated profit or revenue (with respect to the foregoing, save and except for failures by Buyer to make payments for Product as anticipated by this Contract, the losses for which are specifically not excluded and are included), any loss of savings or anticipated savings, any loss of production, any loss of use, any loss of contract or business opportunity, any loss of or damage to goodwill or any business interruption, whether of a direct or indirect nature, (b) any special, indirect and/or consequential losses, or (c) punitive, exemplary or special damages.

6

Each Party (a “First Party”) will indemnify, defend and hold harmless the other Party against any liability, claim, demand and expense (including, without limitation, legal and other professional fees) arising from or relating to any failure of the First Party to fully perform any of its obligations under this Contract.

12. Force Majeure

Any delay or failure of either Party to perform its obligations under this Contract will be excused to the extent that Supplier is unable to produce, sell or deliver, or Buyer is unable to accept delivery, buy or use, the goods or services covered by this Contract, directly as the result of an event or occurrence beyond the reasonable control of such Party, without such Party’s fault or negligence (a “force majeure event”), including, if applicable, actions by any governmental authority (whether valid or invalid), fires, floods, windstorms, explosions, riots, natural disasters, wars and sabotage; provided that written notice of such force majeure event (including the anticipated duration of the delay) must be given by the affected Party to the other Party as soon as possible (but in no event more than 20 days after the force majeure event occurs).

During any force majeure event affecting Supplier’s performance, Buyer may, at its sole option: (i) purchase Product from other sources, without liability to Supplier; and/or (ii) reduce the volumes set forth in any forecast by the amount of Product purchased from such other sources.

The affected Party will use all diligent efforts to ensure that the effects of any force majeure event are minimized and, as promptly as possible, resume full performance under this Contract. If the delay lasts more than       months from notice of the force majeure event being given, either Party may immediately terminate this Contract without liability to either Party.

13. Insurance

Supplier will maintain insurance coverage as would a prudent mine operator in the State of Nevada. Supplier shall insure its interest in the Product for full value for damage or loss arising until title and risk pass to the Buyer as provided in Section 2 with an insurance company rated ‘A-’ or higher by AM Best.

14. Technical Information

Buyer does not expect to receive any confidential technical or other information (the “Non- ContractNon-Contract Information”) from Supplierthe LAC Parties, and Buyer will not be subject to confidentiality or nondisclosure obligations with respect to any such information (including under Section 15 hereof) unless Supplierthe LAC Parties and Buyer have agreed to confidentiality and nondisclosure obligations in a writing signed by their respective authorized representatives that expressly applies to such Non-Contract Information (a “Standalone CA”). Supplier The LAC Parties agrees not to assert any claim (other than for breach of a Standalone CA) with respect to any Non-Contract Information that Supplierthe LAC Parties has disclosed or may hereafter disclose to Buyer or its affiliates and subsidiaries.

7

15. Confidentiality; No Advertising

The Parties agree that the contents of this Contract are confidential and not intended for use or dissemination by either Party without the express written consent of the other Party. For the purposes of this Section 15 a Party making disclosure together with its affiliates and representatives is a “Disclosing Party” and the non-Disclosing Party is an “Affected Party”.

A Disclosing Party may disclose the existence and terms of this Contract (the “Disclosure Exceptions”): (i) to the extent required by law (including the rules of any applicable stock exchange), or by any governmental agency or required or requested to be disclosed pursuant to legal process (including discovery requests) or in connection with any bankruptcy, insolvency, or similar proceeding involving either of the Parties, provided that the Disclosing Party shall (A) immediately upon receiving notice that it is required to make a disclosure under law or stock exchange rules, give the Affected Party prior written notice and an opportunity of not less than 48 hours for the Affected Party to review and comment on the requisite disclosure before it is made, including an opportunity for the Affected Party to prevent such disclosure, (B) use its best efforts to incorporate the Affected Party’s comments or limit such disclosure, by seeking confidential treatment or otherwise, and (C) promptly provide the Affected Party with notice of any requirement to provide any such information, regardless of when such disclosure shall be made; (ii) to the extent necessary to enforce this Contract including, without limitation, for the purposes of dispute resolution as set forth in Section 18; (iii) to any designated purchaser, employee, officer, director, agent, affiliate, representative, lawyer, investor, broker, potential transferee, financier, partner, member, shareholder or actual or potential financing source of the Disclosing Party or that Disclosing Party’s affiliates (but not its representatives) provided that any such person or entity must be, prior to the disclosure, subject to confidentiality obligations that are the same as or more restrictive than the confidentiality obligations in this Contract and that the Disclosing Party disclosing such information to them will be responsible for any breach thereof; and (iv) to the extent such information is or becomes generally available to the public other than as a result of a disclosure by the Disclosing Party in violation of this Contract.

Unless required by applicable law or pursuant to any rules or regulations of any applicable securities exchange, neither Party will in any manner, without first obtaining the other Party’s consent, which consent will not be unreasonably withheld or delayed: (i) advertise or publish the fact that Supplier has contracted to furnish Buyer the Product; (ii) use the other Party’s trademarks, trade names or confidential information in such Party’s advertising or promotional materials; or (iii) use the other Party’s trademarks, trade names or confidential information in any form of electronic communication such as web sites (internal or external), blogs or other types of postings, except as may be required to perform hereunder or as required by law. Any announcement made by the Parties in relation to the execution of this Contract will be agreed in advance by the Parties.

16. Compliance with Laws

Supplier, and any goods or services supplied by Supplier, and Buyer, in connection with its obligations under this Contract, will comply with all applicable laws, rules, regulations, orders, conventions, ordinances or standards of the country(ies) of destination or that relate to the manufacture, labeling, transportation, importation, exportation, licensing, approval or certification of the Product, including, without limitation, those relating to environmental matters, the handling

8

and transportation of dangerous goods or hazardous materials, data protection and privacy, wages, hours and conditions of employment, subcontractor selection, discrimination, occupational health/safety and motor vehicle safety. Supplier, in all respects, and Buyer, in connection with its obligations under this Contract, further represent that neither they nor any of their subcontractors, vendors, agents or other associated third parties will utilize child, slave, prisoner or any other form of forced or involuntary labor, or engage in abusive employment or corrupt business practices, in the supply of Product under this Contract. Supplier, in all respects, and Buyer, in connection with its obligations under this Contract, agree to comply with all applicable anti-corruption laws, including, without limitation, the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, and that neither they nor any of their subcontractors, vendors, agents or other associated third parties will engage in any form of commercial bribery, nor directly or indirectly provide or offer to provide, anything of value to or for the benefit of, any official or employee of a governmental authority or of any government-owned, government-controlled or government-affiliated entity to obtain or retain any contract, business opportunity or other business benefit, or to influence any act or decision of that person in his/her official capacity. At Buyer’s request, Supplier will certify in writing its compliance with the foregoing.

17. Termination for Cause

Upon the occurrence of any of the following “Events of Default” by a Party, the non-defaulting Party may elect to terminate this Contract, in whole or in part, by notice of termination to the defaulting Party and the expiration of any applicable cure period provided below: (a) Either Party repudiates or materially breaches its obligations, or refuses to materially perform its obligations, under this Contract, and if such breach is capable of being cured within twenty (20) Business Days, such breach is not cured by the breaching Party within twenty (20) Business Days of written notice of the occurrence of an Event of Default being provided by the other Party; or (b) Any secured or lien creditor commences a foreclosure action of its liens, security interests and/or mortgages in or against a material portion of a Party’s assets or a Party: (A) commences, or has commenced against it, any case, proceeding or other action under Title 11 of the United States Code or any other liquidation, bankruptcy, conservatorship, moratorium, receivership, insolvency, rearrangement, reorganization or similar debtor relief laws of the United States or any other applicable jurisdictions in effect from time to time, seeking (i) to have an order for relief entered with respect to it, (ii) to adjudicate it as bankrupt or insolvent, (iii) to commence or implement any plan of reorganization, arrangement, adjustment, winding-up, liquidation, dissolution, composition or other relief with respect to it or its debts or (iv) the appointment of a receiver, trustee, custodian, conservator or other similar official for it or for all or any substantial part of its assets; or (B) makes a general assignment for the benefit of its creditors (collectively, an “Insolvency Event”).

18. Governing Law and Jurisdiction

This Contract shall be governed by the laws of the State of New York, excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods (CISG), and without regard to its conflict of laws principles. Any action, dispute or proceeding seeking to enforce any provision of, or based on any right arising solely out of, this Contract (collectively, “Disputes”) shall be first handled pursuant to the following escalation process. Any Party may submit its position on any Dispute in writing to the other Party and such other Party shall, within five (5) Business Days thereafter, submit its position on the Dispute in writing to the first Party.

9

As promptly as practicable, but no later than five (5) Business Days thereafter, the Parties shall enter into good faith negotiations to attempt to resolve the Dispute. If those negotiations do not resolve the Dispute within fifteen (15) Business Days after the first Party’s submission, then either Party may require that the Dispute be submitted, in writing to [      ] of ▇▇▇▇▇ and ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ of Supplier (or, in each case, their functional successors), who shall negotiate in good faith and use their reasonable best efforts to expeditiously resolve the Dispute for a period of fifteen (15) Business Days after that submission, unless [     ] of Buyer and ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ of Supplier (or in each case their functional successors) mutually agree to extend such period of negotiation. Any agreement pertaining to a Dispute shall be reduced to writing, be signed by the Parties and be final and binding upon the Parties. All negotiations pursuant to this Section 18 shall be confidential, and shall be treated as compromise and settlement negotiations for purposes of applicable rules of evidence. In the event that a Dispute has not been resolved after the use of the escalation procedures set forth above, then either Party may initiate the arbitration process. The Dispute shall be submitted to and settled by binding arbitration in New York, New York in accordance with the Administered Arbitration Rules of the International Institute for Conflict Prevention & Resolution, and such arbitration shall be in English. For disputes that involve alleged losses that do not exceed $  million, the Parties shall mutually agree on a single arbitrator within a period of five (5) Business Days of receipt of notice that the other Party has referred a Dispute to arbitration, and if the Parties cannot agree upon the single arbitrator within such period of five (5) Business Days, the single arbitrator shall be appointed as promptly as practicable by the International Institute for Conflict Prevention & Resolution. For disputes that involve alleged losses that exceed $  million, each Party shall, within five (5) Business Days of receipt of notice that the other Party has referred a Dispute to arbitration, appoint one nominating arbitrator and such nominating arbitrators shall together select within five (5) Business Days a neutral arbitrator who will conduct the arbitration. If such nominating arbitrators are not able to select a neutral arbitrator, the neutral arbitrator shall be appointed as promptly as practicable by the International Institute for Conflict Prevention & Resolution. The costs of the arbitrator shall be in the cause. The single arbitrator or the one neutral arbitrator shall make a decision within sixty (60) days of the arbitrator’s appointment. The arbitrator shall not be empowered to award punitive or exemplary damages. The award rendered by the arbitrator shall be final and binding upon the Parties, and the judgement on the award rendered may be entered in any court having jurisdiction thereof. All Disputes shall be settled in this manner in lieu of an action at law or equity; provided, however, that nothing in this Section 18 shall be construed as precluding the bringing of an action for temporary or preliminary injunctive relief or other equitable relief. Each Party hereby irrevocably and unconditionally (i) waives any objection to the laying of venue of any such action, suit or proceeding in any such court, (ii) agrees not to plead or claim in any such court that any such action, suit or proceeding brought in any such court has been brought in an inconvenient forum and (iii) agrees that service of any court paper may be effected on such Party in any manner as may be provided under applicable laws or court rules of the State of New York.

10

Exhibit C

Phase One Product Specifications

Packaging Specifications for Lithium Carbonate:

11

Exhibit D

12

Exhibit E

43

Exhibit F

44

Exhibit G

Summary of Section 2.3 to Section 2.7

Annual Production/Purchase Forecast*

1. Supplier submits by Jul 31 of prior year: Total for Year 1 binding, Year 2 is non-bindingnon-binding.

2. GM provides forecast by Aug 31 of prior year: Total for Year 1 binding, Year 2 is non-bindingnon-binding .

Quarterly Shipping Forecast:

1. Supplier submits by 5th Business Day of quarter:

a. Rolling 4 quarter forecast for upcoming quarters that matches Annual forecast.

b. Shipping schedule for next quarter based on prior quarter.

c. Permitted variance of  % for immediately upcoming Quarter and  % thereafter.

d. Note that current quarter is governed by prior Buyer Forecast

2. GM & affiliates respond within 20 Business Days:

a. Provide consolidated purchase quantity in next four quarters by Designated Buyer

b. Confirm shipping schedule provided by LAC for next quarter

c. Supplier has 5 Business Days to confirm receipt and accept or prefer modifications

45