Supplemental Agreement No. 1 to Purchase Agreement No. 2484 between The Boeing Company and Continental Airlines, Inc. Relating to Boeing Model 787-8 Aircraft

EXHIBIT 10.5

Purchase Agreement No. 2484

between

The Boeing Company

and

Continental Airlines, Inc.

Relating to Boeing Model 787-8 Aircraft

THIS SUPPLEMENTAL AGREEMENT, entered into as of June 30, 2005, by and between THE BOEING COMPANY (Boeing) and Continental Airlines, Inc. (Customer);

WHEREAS, the parties hereto entered into Purchase Agreement No. 2484 dated December 29, 2004 (the Purchase Agreement), as amended and supplemented, relating to Boeing Model 787-8 aircraft (the Aircraft);

WHEREAS, Boeing and Customer have mutually agreed to [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

WHEREAS, Boeing and Customer have mutually agreed to the offering of five (5) 787-8 option aircraft (the Option Aircraft) with delivery position as follows:

1/May 2011

1/June 2011

1/March 2012

1/April 2012

1/May 2012

WHEREAS, Boeing and Customer have mutually agreed the previously open contracting issues as defined in Open Matters Letter Agreement 6-1162-MSA-553 have been completed, incorporated into the applicable areas of this Purchase Agreement or AGTA (AGTA-CAL), or are otherwise considered closed, and;

WHEREAS, Boeing and Customer have mutually agreed to other terms and conditions modifications of the Purchase Agreement.

NOW THEREFORE, in consideration of the mutual covenants herein contained, the parties agree to amend the Purchase Agreement as follows:

1. Table of Contents, Articles, Tables and Exhibits:

1.1 Remove and replace, in its entirety, the "Table of Contents", with the Table of Contents attached hereto, to reflect the changes made by this Supplemental Agreement No. 1.

1.2 Remove and replace, in its entirety, the "Articles" text, with the Articles text attached hereto, to reflect the changes made by this Supplemental Agreement No. 1.

1.3 Remove and replace, in its entirety, Table 1 (page 1 and 2) entitled, "Purchase Agreement 2484 Aircraft Deliveries, Descriptions, Price and Advance Payments", with revised Table 1 (page 1 and 2), attached hereto, to reflect the rescheduling of certain Aircraft.

1.4 Include Exhibit A entitled, "Aircraft Configuration", attached hereto.

1.5 Include Exhibit B entitled, "Aircraft Delivery Requirements and Responsibilities", attached hereto.

1.6 Include Supplemental Exhibit AE1 entitled, "Escalation Adjustment Airframe and Optional Features", attached hereto.

1.7 Include Supplemental Exhibit BFE1 entitled, "Buyer Furnished Equipment Variables", attached hereto.

1.8 Include Supplemental Exhibit CS1 entitled, "787 Customer Support Document", attached hereto.

1.9 Include Supplemental ▇▇▇▇▇▇▇ ▇▇▇ entitled, "Engine Escalation and Engine Warranty", attached hereto.

1.10 Include Supplemental Exhibit SLP1 entitled, "Service Life Policy Components", attached hereto.

2. Letter Agreements:

2.1 Remove and replace, in its entirety, Letter Agreement 6-1162-MSA-546, "Open Configuration Matters", with the revised Letter Agreement 6-1162-MSA-546R1 attached hereto.

2.2 Include Letter Agreement 6-1162-MSA-547, "Option Aircraft", attached hereto.

2.3 Include Letter Agreement 6-1162-MSA-549, "Spare Parts Initial Provisioning", attached hereto.

2.4 Include Letter Agreement 6-1162-MSA-550, "Spare Parts Commitments", attached hereto.

2.5 Include Letter Agreement 6-1162-MSA-551, [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT], attached hereto.

2.6 Remove and replace, in its entirety, Letter Agreement 6-1162-MSA-552, "Special Matters", with the revised Letter Agreement 6-1162-MSA-552R1 attached hereto.

2.7 Remove and replace, in its entirety, Letter Agreement 6-1162-MSA-553, "Open Matters", with the revised Letter Agreement 6-1162-MSA-553R1 attached hereto.

2.8 Include Letter Agreement 6-1162-MSA-554, [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

attached hereto.

2.9 Include Letter Agreement 6-1162-MSA-555, "Promotional Support", attached hereto.

2.10 Include Letter Agreement 6-1162-MSA-609, "Alternate Engine Selection", attached hereto.

The Agreement will be deemed to be supplemented to the extent herein provided as of the date hereof and as so supplemented will continue in full force and effect.

EXECUTED IN DUPLICATE as of the day and year first written above.

THE BOEING COMPANY Continental Airlines, Inc.

By: /s/ ▇▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇▇▇ By: /s/ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇

Its: Attorney-In-Fact __ Its: Senior Vice President -

Finance and Treasurer

PURCHASE AGREEMENT NUMBER 2484

between

THE BOEING COMPANY

and

ContinenTal airlines, inc.

Relating to Boeing Model 787 Aircraft

TABLE OF CONTENTS

ARTICLES NUMBER

1. Quantity, Model and Description

2. Delivery Schedule

3. Price

4. Payment

5. Additional Terms

TABLE

1. Aircraft Information Table 1

EXHIBIT

A. Aircraft Configuration 1

B. Aircraft Delivery Requirements and Responsibilities 1

SUPPLEMENTAL EXHIBITS

AE1. Escalation Adjustment/Airframe and Optional Features 1

BFE1. Buyer Furnished Equipment Variables 1

CS1. Customer Support Document 1

EE1. Engine Escalation/Engine Warranty and Patent Indemnity 1

SLP1. Service Life Policy Components 1

TABLE OF CONTENTS

LETTER AGREEMENTS NUMBER

6-1162-MSA-546R1 Open Configuration Matters 1

6-1162-MSA-547 Option Aircraft 1

6-1162-MSA-549 Spares Initial Provisioning 1

TABLE OF CONTENTS

CONFIDENTIAL LETTER AGREEMENTS NUMBER

6-1162-MSA-550 Spare Parts Commitment 1

6-1162-MSA-551 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] 1

6-1162-MSA-552R1 Special Matters 1

6-1162-MSA-553R1 Open Matters 1

6-1162-MSA-554 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] 1

6-1162-MSA-555 Promotion Support 1

▇-▇▇▇▇-▇▇▇-▇▇▇ ▇▇▇▇▇▇▇▇▇ Engine Selection 1

TABLE OF CONTENTS

SUPPLEMENTAL AGREEMENTS DATED AS OF:

Supplemental Agreement ▇▇. ▇ ▇▇▇▇ ▇▇, ▇▇▇▇

▇▇▇▇▇▇▇▇ Agreement No. 2484

between

The Boeing Company

and

Continental Airlines, Inc.

______________________________

This Purchase Agreement No. 2484 dated as of December 29, 2004 between The Boeing Company (Boeing) and Continental Airlines, Inc. (Customer) relating to the purchase and sale of Model 787 aircraft together with all tables, exhibits, supplemental exhibits, letter agreements and other attachments thereto, if any, (Purchase Agreement) incorporates and amends the terms and conditions of the Aircraft General Terms Agreement dated as of October 10, 1997 between the parties, identified as AGTA-CAL (AGTA).

Article 1. Quantity, Model, Description and Inspection.

The aircraft to be delivered to Customer will be designated as Model 787-8 aircraft (the Aircraft). Boeing will manufacture and sell to Customer Aircraft conforming to the configuration described in Exhibit A in the quantities listed in Table 1 to this Purchase Agreement. Twelve (12) months prior to delivery of Customer's first Aircraft, Boeing will provide Customer a Boeing document defining a customer inspection process appropriate to the 787 manufacturing process (787 Inspection Process) which will apply in lieu of inspection processes traditionally applicable to other models of aircraft and will supersede the provisions of Article 5.2 of the AGTA.

Article 2. Delivery Schedule.

The Aircraft will be delivered to Customer in accordance with the scheduled months of delivery of the Aircraft listed in the attached Table 1. Exhibit B describes certain responsibilities for both Customer and Boeing in order to accomplish the delivery of the Aircraft.

Article 3. Price.

3.1 Aircraft Basic Price. The Aircraft Basic Price is listed in Table 1 in subject to escalation dollars. [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

3.2 Advance Payment Base Prices. The Advance Payment Base Prices listed in Table 1 were calculated utilizing the latest escalation factors available to Boeing on the date of this Purchase Agreement projected to the month of scheduled delivery.

Article 4. Payment.

4.1 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

4.2 The standard advance payment schedule for the Model 787 Aircraft requires Customer to make certain advance payments, expressed as a percentage of the Advance Payment Base Price of each Aircraft beginning with a payment of [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]%, less the Deposit, on the date of signing of the Purchase Agreement for the Aircraft. Additional advance payments for each Aircraft are due as specified in and on the first business day of the months listed in the attached Table 1.

4.3 For any Aircraft whose scheduled month of delivery is less than 24 months from the date of this Purchase Agreement, the total amount of advance payments due for payment upon signing of this Purchase Agreement will include all advance payments which are past due in accordance with the standard advance payment schedule set forth in paragraph 4.2 above.

4.4 Customer will pay the balance of the Aircraft Price of each Aircraft at delivery. The Aircraft Price for each Aircraft will be re-calculated at the time that Aircraft is delivered using the then available escalation factors for the month when that Aircraft is delivered to calculate the Escalation Adjustment as defined in Supplemental Exhibit AE1.

Article 5. Additional Terms.

5.1 Excusable Delay. Article 7.1 of the basic articles of the AGTA in so far as it applies to the Aircraft only is revised to read as follows:

7.1 General. Boeing will not be liable for any delay in the scheduled delivery month of an aircraft or other performance under a purchase agreement caused by (i) acts of God; (ii) war or armed hostilities; (iii) government acts or priorities; (iv) fires, floods, or earthquakes; (v) strikes or labor troubles causing cessation, slowdown, or interruption of work; (vi) inability, after commercial reasonable effort, to procure materials, systems, accessories, equipment or parts; (vii) inability, after due and timely diligence, to obtain type certification; or (viii) any other cause to the extent such cause is beyond Boeing's control and not occasioned by Boeing's fault or negligence. A delay resulting from any such cause is defined as an Excusable Delay.

5.2 Aircraft Information Table. Table 1 consolidates information contained in Articles 1, 2, 3 and 4 with respect to (i) quantity of Aircraft, (ii) applicable Detail Specification for the Aircraft, (iii) month and year of scheduled deliveries of the Aircraft, (iv) Aircraft Basic Price, (v) escalation factors applicable to the Aircraft and (vi) Advance Payment Base Prices and advance payments applicable to the Aircraft and their schedules.

5.3 Escalation Adjustment/Airframe and Optional Features. Supplemental Exhibit AE1 contains the applicable airframe and optional features escalation formula for the Aircraft.

5.4 Buyer Furnished Equipment Variables. Supplemental Exhibit BFE1 contains vendor selection dates and other variables applicable to the Aircraft.

5.5 Customer Support Variables. Information, training, services and other things furnished by Boeing in support of introduction of the Aircraft into Customer's fleet are described in Supplemental Exhibit CS1. Supplemental Exhibit CS1 supersedes in its entirety Exhibit B to the AGTA with respect to the Aircraft but not with respect to any other aircraft.

5.6 Engine Escalation Variables. Supplemental Exhibit EE1 contains the applicable engine escalation formula, the engine warranty and the engine patent indemnity for the Aircraft.

5.7 Service Life Policy Component Variables. Supplemental Exhibit SLP1 lists the airframe and landing gear components covered by the Service Life Policy for the Aircraft (Covered Components).

5.8 Public Announcement. Boeing reserves the right to make a public announcement regarding Customer's purchase of the Aircraft upon approval of Boeing's press release by Customer's public relations department or other authorized representative.

5.9 Negotiated Agreement; Entire Agreement. This Purchase Agreement, including the provisions of Article 8.2 of the AGTA relating to insurance, and Article 12 of Part 2 of Exhibit C of the AGTA relating to DISCLAIMER AND RELEASE and EXCLUSION OF CONSEQUENTIAL AND OTHER DAMAGES, has been the subject of discussion and negotiation and is understood by the parties; the Aircraft Price and other agreements of the parties stated in this Purchase Agreement were arrived at in consideration of such provisions. This Purchase Agreement, including the AGTA, contains the entire agreement between the parties and supersedes all previous proposals, understandings, commitments or representations whatsoever, oral or written, and may be changed only in writing signed by authorized representatives of the parties.

DATED AS OF December 29, 2004

CONTINENTAL airlines, inc.

By: /s/ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇

Its: Senior Vice President -

Finance & Treasurer

THE BOEING COMPANY

By: /s/ ▇▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇▇▇

ITS: Attorney-In-Fact

Table 1

Purchase Agreement 2484

Aircraft Delivery, Description, Price and Advance Payments

(787-8 / [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] 2004 $s [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

Table 1

Purchase Agreement 2484

Aircraft Delivery, Description, Price and Advance Payments

@PA/EXA #

AIRCRAFT CONFIGURATION

between

THE BOEING COMPANY

and

CONTINENTAL AIRLINES, INC.

Exhibit A to Purchase Agreement Number 2484

Exhibit A to

Purchase Agreement No. 2484

Page 2

AIRCRAFT CONFIGURATION

Dated June 30, 2005

relating to

BOEING MODEL 787-8 AIRCRAFT

The Airframe Price in Table 1 was established utilizing the 787 Airplane Description and Selections 787B1-0227 Revision E dated March 2, 2005 and YS6308-E dated March 2, 2005 for 270 passenger interior. The content of this Exhibit A will be defined pursuant to the provisions of Letter Agreement 6-1162-MSA-546R1, Open Configuration Matters, to the Purchase Agreement.

AIRCRAFT DELIVERY REQUIREMENTS AND RESPONSIBILITIES

between

THE BOEING COMPANY

and

continental airlines, inc.

Exhibit B to Purchase Agreement Number 2484

AIRCRAFT DELIVERY REQUIREMENTS AND RESPONSIBILITIES

relating to

BOEING MODEL 787-8 AIRCRAFT

Both Boeing and Customer have certain documentation and approval responsibilities at various times during the construction cycle of Customer's Aircraft that are critical to making the delivery of each Aircraft a positive experience for both parties. This Exhibit B documents those responsibilities and indicates recommended completion deadlines for the actions to be accomplished. If Customer fails to meet any particular deadline for an Aircraft, such failure shall not be deemed a breach of the Purchase Agreement provided that Customer promptly contacts Boeing to negotiate and agree upon a later deadline that will not interrupt Boeing's manufacturing operations nor cause a delay in delivery of the affected Aircraft.

1. GOVERNMENT DOCUMENTATION REQUIREMENTS.

Certain actions are required to be taken by Customer in advance of the scheduled delivery month of each Aircraft with respect to obtaining certain government issued documentation.

1.1 Airworthiness and Registration Documents.

Not later than 6 months prior to delivery of each Aircraft, Customer will notify Boeing of the registration number to be painted on the side of the Aircraft. In addition, and not later than 3 months prior to delivery of each Aircraft, Customer will, by letter to the regulatory authority having jurisdiction, authorize the temporary use of such registration numbers by Boeing during the pre-delivery testing of the Aircraft.

Customer is responsible for furnishing any Temporary or Permanent Registration Certificates required by any governmental authority having jurisdiction to be displayed aboard the Aircraft after delivery.

1.2 Certificate of Sanitary Construction.

1.2.1 U.S. Registered Aircraft. Boeing will obtain from the United States Public Health Service, a United States Certificate of Sanitary Construction to be displayed aboard each Aircraft after delivery to Customer.

1.2.2 Non-U.S. Registered Aircraft. If, for any non-U.S. registered Aircraft, Customer requires a United States Certificate of Sanitary Construction at the time of delivery of the Aircraft, Customer will give written notice thereof to Boeing at least 3 months prior to delivery. Boeing will then use its reasonable best efforts to obtain the Certificate from the United States Public Health Service and present it to Customer at the time of Aircraft delivery.

1.3 Customs Documentation.

1.3.1 Import Documentation. If the Aircraft is intended to be exported from the United States, Customer must notify Boeing not later than 3 months prior to delivery of each Aircraft of any documentation required by the customs authorities or by any other agency of the country of import.

1.3.2 General Declaration - U.S. If the Aircraft is intended to be exported from the United States, Boeing will prepare Customs Form 7507, General Declaration, for execution by U.S. Customs immediately prior to the ferry flight of the Aircraft. For this purpose, Customer will furnish to Boeing not later than 20 days prior to delivery all information required by U.S. Customs or U.S. Immigration and Naturalization Service, including without limitation (i) a complete crew and passenger list identifying the names, birth dates, passport numbers and passport expiration dates of all crew and passengers and (ii) a complete ferry flight itinerary, including point of exit from the United States for the Aircraft.

If Customer intends, during the ferry flight of an Aircraft, to land at a U.S. airport after clearing Customs at delivery, Customer must notify Boeing not later than 20 days prior to delivery of such intention. If Boeing receives such notification, Boeing will provide to Customer the documents constituting a Customs permit to proceed, allowing such Aircraft to depart after any such landing. Sufficient copies of completed Form 7507, along with passenger manifest, will be furnished to Customer to cover U.S. stops scheduled for the ferry flight.

1.3.3 Export Declaration - U.S. If the Aircraft is intended to be exported from the United States, Boeing will prepare Form 7525V and, immediately prior to the ferry flight, will submit such Form to U.S. Customs in Seattle in order to obtain clearance for the departure of the Aircraft, including any cargo, from the United States. U.S. Customs will deliver the Export Declaration to the U.S. Department of Commerce after export.

2. Insurance CertificateS.

Unless provided earlier, Customer will provide to Boeing not later than 30 days prior to delivery of the first Aircraft, a copy of the requisite annual insurance certificate in accordance with the requirements of Article 8 of the AGTA.

3. NOTICE OF FLYAWAY CONFIGURATION.

Not later than 20 days prior to delivery of the Aircraft, Customer will provide to Boeing a configuration letter stating the requested "flyaway configuration" of the Aircraft for its ferry flight. This configuration letter should include:

(i) the name of the company which is to furnish fuel for the ferry flight and any scheduled post-delivery flight training, the method of payment for such fuel, and fuel load for the ferry flight;

(ii) the cargo to be loaded and where it is to be stowed on board the Aircraft, the address where cargo is to be shipped after flyaway and notification of any hazardous materials requiring special handling;

(iii) any BFE equipment to be removed prior to flyaway and returned to Boeing BFE stores for installation on Customer's subsequent Aircraft;

(iv) a complete list of names and citizenship of each crew member and non-revenue passenger who will be aboard the ferry flight; and

(v) a complete ferry flight itinerary.

4. DELIVERY ACTIONS BY BOEING.

4.1 Schedule of Inspections. All inspections of the Aircraft by FAA, Boeing, Customer and, if required, U.S. Customs Bureau will be scheduled by Boeing for completion prior to delivery or departure of the Aircraft. Boeing will inform Customer of such schedules.

4.2 Schedule of Demonstration Flights. All FAA and Customer demonstration flights will be scheduled by Boeing for completion prior to delivery of the Aircraft.

4.3 Schedule for Customer's Flight Crew. Boeing will inform Customer of the date that a flight crew is required for acceptance routines associated with delivery of the Aircraft.

4.4 Fuel Provided by Boeing. Boeing will provide to Customer, without charge, the amount of fuel shown in U.S. gallons in the table below for the model of Aircraft being delivered and full capacity of engine oil at the time of delivery or prior to the ferry flight of the Aircraft.

Aircraft Model	Fuel Provided
787	[CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

4.5 Flight Crew and Passenger Consumables. Boeing will provide reasonable quantities of food, trash bags in the galleys, coat hangers, towels, toilet tissue, drinking cups and soap for the first segment of the ferry flight for the Aircraft.

4.6 Delivery Papers, Documents and Data. Boeing will have available at the time of delivery of the Aircraft certain delivery papers, documents and data for execution and delivery. Prior to ticketing the Aircraft, Customer will provide Company Aircraft Maintenance Logs for Boeing Airworthiness Release stamp and/or signature, and after delivery but prior to Aircraft departure, load software as required by Customer per Customer Software Letter Agreement 6-1162-MSA-XXX for ferry flight to destination. If title for the Aircraft will be transferred to Customer through a Boeing sales subsidiary and if the Aircraft will be registered with the FAA, Boeing will pre-position in Oklahoma City, Oklahoma, for filing with the FAA at the time of delivery of the Aircraft an executed original Form 8050-2, Aircraft ▇▇▇▇ of Sale, indicating transfer of title to the Aircraft from Boeing's sales subsidiary to Customer.

4.7 Delegation of Authority. If specifically requested in advance by Customer, Boeing will present a certified copy of a Resolution of Boeing's Board of Directors, designating and authorizing certain persons to act on its behalf in connection with delivery of the Aircraft.

5. DELIVERY ACTIONS BY CUSTOMER.

5.1 Aircraft Radio Station License. At delivery of the Aircraft Customer will provide its Aircraft Radio Station License to be placed on board the Aircraft following delivery.

5.2. Aircraft Flight Log. At delivery of the Aircraft Customer will provide the Aircraft Flight Log for the Aircraft.

5.3 Delegation of Authority. Customer will present to Boeing at delivery of the Aircraft an original or certified copy of Customer's Delegation of Authority designating and authorizing certain persons to act on its behalf in connection with delivery of the specified Aircraft.

ESCALATION ADJUSTMENT

AIRFRAME AND OPTIONAL FEATURES

between

THE BOEING COMPANY

and

Continental airlines, inc.

Supplemental Exhibit AE1 to Purchase Agreement Number 2484

1. Formula

Airframe and Optional Features price adjustments (Airframe Price Adjustment) are used to allow prices to be stated in current year dollars at the signing of this Purchase Agreement and to adjust the amount to be paid by Customer at delivery for the effects of economic fluctuation. The Airframe Price Adjustment will be determined at the time of Aircraft delivery in accordance with the following formula:

P_a = (P) (L + M) - P

Where:

P_a = Airframe Price Adjustment.

L = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

x ( ECI

ECI_b) where ECI_b is the base year index
(as set forth in Table 1 of this
Purchase Agreement)

M = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

x [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

where [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] is the base year index (as set forth in Table 1 of this Purchase Agreement)

P = Airframe Price plus Optional Features Price (as set forth in Table 1 of this Purchase Agreement).

ECI is a value determined using the U.S. Department of Labor, Bureau of Labor Statistics [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT], calculated by establishing a three-month arithmetic average value (expressed as a decimal and rounded to the nearest tenth) using the values for the [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] months prior to the month of scheduled delivery of the applicable Aircraft. As the Employment Cost Index values are only released on a quarterly basis, the value released for the month of March will be used for the months of January and February; the value for June used for April and May; the value for September used for July and August; and the value for December used for October and November.

[CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] is a value determined using the U.S. Department of Labor, Bureau of Labor Statistics [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT], calculated as a 3-month arithmetic average of the released monthly values (expressed as a decimal and rounded to the nearest tenth) using the values for the [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] months prior to the month of scheduled delivery of the applicable Aircraft.

As an example, for an Aircraft scheduled to be delivered in the month of July, the months [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] of the preceding year will be utilized in determining the value of ECI and [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT].

Note: i. In determining the values of L and M, all calculations and resulting values will be expressed as a decimal rounded to the nearest ten-thousandth.

ii. [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] is the numeric ratio attributed to [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] in the Airframe Price Adjustment formula.

iii. [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] is the numeric ratio attributed to [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] in the Airframe Price Adjustment formula.

iv. The denominators (base year indices) are the actual average values reported by the U.S. Department of Labor, Bureau of Labor Statistics. The actual average values are calculated as a 3-month arithmetic average of the released monthly values (expressed as a decimal and rounded to the nearest tenth) using the values for the [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] months prior to the airframe base year. The applicable base year and corresponding denominator is provided by Boeing in Table 1 of this Purchase Agreement.

v. The final value of P_a will be rounded to the nearest dollar.

vi. [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2. Values to be Used if Bureau of Labor Statistics Are [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT].

2.1 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2.2 Notwithstanding Article 2.1 above, if prior to the scheduled delivery month of an Aircraft the Bureau of Labor Statistics changes the base year for determination of the ECI and [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] values as defined above, such re-based values will be incorporated in the Airframe Price Adjustment calculation.

2.3 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2.4 If within 12 months of Aircraft delivery, the published index values are revised due to an acknowledged error by the Bureau of Labor Statistics, the Airframe Price Adjustment will be re-calculated using the revised index values (this does not include those values noted as preliminary by the Bureau of Labor Statistics). A credit memorandum or supplemental invoice will be issued for the Airframe Price Adjustment difference. Interest charges will not apply for the period of original invoice to issuance of credit memorandum or supplemental invoice.

Note: i. The values released by the Bureau of Labor Statistics and available to Boeing 30 days prior to the first day of the scheduled delivery month of an Aircraft will be used to determine the ECI and [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] values for the applicable months (including those noted as preliminary by the Bureau of Labor Statistics) to calculate the Airframe Price Adjustment for the Aircraft invoice at the time of delivery. The values will be considered final and no Airframe Price Adjustments will be made after Aircraft delivery for any subsequent changes in published Index values, subject always to paragraph 2.4 above.

ii. The maximum number of digits to the right of the decimal after rounding utilized in any part of the Airframe Price Adjustment equation will be 4, where rounding of the fourth digit will be increased to the next highest digit when the 5th digit is equal to 5 or greater.

BUYER FURNISHED EQUIPMENT VARIABLES

between

THE BOEING COMPANY

and

CONTINENTAL AIRLINES

Supplemental Exhibit BFE1 to Purchase Agreement Number 2484

BUYER FURNISHED EQUIPMENT VARIABLES

relating to

787-8 AIRCRAFT

This Supplemental Exhibit BFE1 contains vendor selection dates, on-dock dates and other variables applicable to the Aircraft.

1. Supplier Selection.

Customer will:

1.1 Select and notify Boeing of the suppliers and part numbers of the following Buyer Furnished Equipment (BFE) items by the following dates:

(TBI)

2. On-dock Dates

On or before (date to be determined, if BFE is applicable), Boeing will provide to Customer a BFE Requirements On-Dock/Inventory Document (BFE Document) or an electronically transmitted BFE Report which may be periodically revised, setting forth the items, quantities, on-dock dates and shipping instructions relating to the in-sequence installation of BFE. For planning purposes, a preliminary BFE on-dock schedule is set forth below:

Item Preliminary On-Dock Dates

[Month of Delivery:]


	Aircraft	Aircraft
(date to be determined, if BFE is applicable)

Additional Delivery Requirements

Customer will ensure that Customer's BFE suppliers provide sufficient information to enable Boeing, when acting as Importer of Record for Customer's BFE, to comply with all applicable provisions of the U.S. Customs Service.

787 CUSTOMER SUPPORT DOCUMENT

between

THE BOEING COMPANY

and

CONTINENTAL AIRLINES, INC.

Supplemental Exhibit CS1 to Purchase Agreement Number 2484

This document contains:

Part 1: Boeing Maintenance and Flight Training Programs; Operations Engineering Support

Part 2: Field Services and Engineering Support

Services

Part 3: Technical Information and Materials

Part 4: Alleviation or Cessation of Performance

Part 5: Protection of Proprietary Information and
Proprietary Materials

787 CUSTOMER SUPPORT DOCUMENT

PART 1: BOEING MAINTENANCE AND FLIGHT TRAINING

PROGRAMS; OPERATIONS ENGINEERING SUPPORT

1. Boeing Training Programs.

Boeing will provide maintenance training, cabin attendant training, and flight training programs to support the introduction of the Aircraft into service as provided in this Supplemental Exhibit CS1.

1.1 Customer is awarded 1,280 points (Training Points) [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]. At any time before 24 months after delivery of Customer's last Aircraft (Training Program Period) Customer may exchange Training Points for any of the training courses described on Attachment A at the point values described on Attachment A or for other training Boeing may identify at specified point values. At the end of the Training Program Period any unused Training Points will expire.

1.2 In addition to the training provided in Article 1.1, Boeing will provide to Customer the following training and services:

1.2.1 Flight dispatcher model specific instruction; 2 classes of 6 students;

1.2.2 Performance engineer model specific instruction in Boeing's regularly scheduled courses; schedules are published yearly.

1.2.3 Additional Flight Operations Services:

a. Boeing flight crew personnel to assist in ferrying the first Aircraft to Customer's main base;

b. Instructor pilots for 90 Man Days (as defined in Article 5.4, below) for revenue service training assistance;

c. An instructor pilot to visit Customer 6 months after revenue service training to review Customer's flight crew operations for a

2 week period.

If any part of the training described in this Article 1.2 is not completed by Customer within 24 months after the delivery of the last Aircraft, Boeing will have no obligation to provide such training.

2. Training Schedule and Curricula.

2.1 Customer and Boeing will together conduct planning conferences approximately 12 months before the scheduled delivery month of the first Aircraft of a model to define and schedule the maintenance, flight training and cabin attendant training programs. At the conclusion of each planning conference the parties will document Customer's course selection, training schedule, and, if applicable, Training Point application and remaining Training Point balance.

2.2 Customer may also request training by written notice to Boeing identifying desired courses, dates and locations. Within 15 days of Boeing's receipt of such request Boeing will provide written response to Customer confirming whether the requested courses are available at the times and locations requested by Customer.

3. Location of Training.

3.1 Boeing will conduct all training at any of its or its wholly-owned subsidiaries' training facilities equipped for the model of Aircraft. Customer shall decide on the location or mix of locations for training, subject to space being available in the desired courses at the selected training facility on the dates desired.

3.2 If requested by Customer, Boeing will conduct the classroom portions of the maintenance and flight training (except for the Performance Engineer training courses) at a mutually acceptable alternate training site, subject to the following conditions:

3.2.1 Customer will provide acceptable classroom space, simulators (as necessary for flight training) and training equipment required to present the courses;

3.2.2 Customer will pay Boeing's portal to portal actual expenses for lodging, ground transportation, laundry, baggage handling, communication costs and per diem meal charge for each Boeing instructor for each day, or fraction thereof, that the instructor is away from his home location, including travel time;

3.2.3 Customer will provide, or will reimburse Boeing for the actual costs of round-trip transportation for Boeing's instructors and the shipping costs of training Materials (as defined in Part 3 paragraph 1 of this Supplemental Exhibit CS1), which must be shipped to the alternate training site;

3.2.4 Customer will be responsible for all taxes, fees, duties, licenses, permits and similar expenses incurred by Boeing and its employees as a result of Boeing's providing training at the alternate site or incurred as a result of Boeing providing revenue service training; and

3.2.5 Those portions of training that require the use of training devices not available at the alternate site will be conducted at Boeing's facility or at some other alternate site. Customer will be responsible for additional expenses, if any, which result from the use of such alternate site.

4. Training Materials.

Boeing will provide training Materials will be provided for each student (Training Materials). In addition, if requested by Customer, one complete set of Training Materials will be provided for use in Customer's own training program. Training Materials may be used only for either (i) the individual student's reference during Boeing provided training and for review thereafter or (ii) Customer's provision of training to individuals directly employed by the Customer.

5. Additional Terms and Conditions.

5.1 All training will reflect an airplane configuration defined by (i) Boeing's standard configuration specification for 787 aircraft, (ii) Boeing's standard configuration specification for the minor model of 787 aircraft selected by Customer, and (iii) any Optional Features selected by Customer from Boeing's standard catalog of Optional Features. Upon Customer's request, Boeing may provide training customized to reflect other elements of Customer's Aircraft configuration subject to a mutually acceptable price, schedule, scope of work and other applicable terms and conditions.

5.2 All training will be provided in the English language. If translation is required, Customer will provide interpreters.

5.3 Customer will be responsible for all expenses of Customer's personnel except that in the Puget Sound region of Washington State Boeing will transport Customer's personnel between their local lodgings and Boeing's training facility.

5.4 Boeing flight instructor personnel will not be required to work more than 5 days per week, or more than 8 hours in any one 24-hour period (Man Day), of which not more than 5 hours per 8-hour workday will be spent in actual flying. These foregoing restrictions will not apply to ferry assistance or revenue service training services, which will be governed by FAA rules and regulations.

5.5 Normal Line Maintenance is defined as line maintenance that Boeing might reasonably be expected to furnish for flight crew training at Boeing's facility, and will include ground support and Aircraft storage in the open, but will not include provision of spare parts. Boeing will provide Normal Line Maintenance services for any Aircraft while the Aircraft is used for flight crew training at Boeing's facility in accordance with the Boeing Maintenance Plan (Boeing document D6-82076) and the Repair Station Operation and Inspection Manual (Boeing document D6-25470). Customer will provide such services if flight crew training is conducted elsewhere. Regardless of the location of such training, Customer will be responsible for providing all maintenance items (other than those included in Normal Line Maintenance) required during the training, including, but not limited to, fuel, oil, landing fees and spare parts.

5.6 If the training is based at Boeing's facility and the Aircraft is damaged during such training, Boeing will make all necessary repairs to the Aircraft as promptly as possible. Customer will pay Boeing's reasonable charge, including the price of parts and materials, for making the repairs. If Boeing's estimated labor charge for the repair exceeds $[CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT], Boeing and Customer will enter into an agreement for additional services before beginning the repair work.

5.7 If the flight training is based at Boeing's facility, several airports in the surrounding area may be used, at Boeing's option, which shall be identified by Boeing at the flight training planning conference. Unless otherwise agreed in the flight training planning conference, it will be Customer's responsibility to make arrangements for the use of such airports.

5.8 If Boeing agrees to make arrangements on behalf of Customer for the use of airports for flight training, Boeing will pay on Customer's behalf any landing fees charged by any airport used in conjunction with the flight training. At least 30 days before flight training, Customer will provide Boeing an open purchase order against which Boeing will invoice Customer for any landing fees Boeing paid on Customer's behalf. The invoice will be submitted to Customer approximately 60 days after flight training is completed, when all landing fee charges have been received and verified. Customer will pay the invoiced amount to Boeing within 30 days of the date of the invoice.

5.9 If requested by Boeing, in order to provide the flight training or ferry flight assistance, Customer will make available to Boeing an Aircraft after delivery to familiarize Boeing instructor or ferry flight crew personnel with such Aircraft. If flight of the Aircraft is required for any Boeing instructor or ferry flight crew member to maintain an FAA license for flight proficiency or landing currency, Boeing will be responsible for the costs of fuel, oil, landing fees and spare parts attributable to that portion of the flight.

787 CUSTOMER SUPPORT DOCUMENT

PART 2: FIELD AND ENGINEERING SUPPORT SERVICES

1. Field Service Representation.

Boeing will furnish field service representation to advise Customer with respect to the maintenance and operation of the Aircraft (Field Service Representatives).

1.1 Field Service Representatives will be available at or near Customer's main maintenance or engineering facility beginning before the scheduled delivery month of the first Aircraft and ending [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] after delivery of the last Aircraft covered by a specific purchase agreement.

1.2 When a Field Service Representative is positioned at Customer's facility, Customer will provide, at no charge to Boeing, suitable furnished office space and office equipment, including internet capability for electronic access of data, at the location where Boeing is providing Field Service Representatives. As required, Customer will assist each Field Service Representative with visas, work permits, customs, mail handling, identification passes and formal introduction to local airport authorities.

1.3 Boeing's Field Service Representatives are assigned to various airports and other locations around the world. Whenever Customer's Aircraft are operating through any such airport, the services of Boeing's Field Service Representatives are available to Customer.

2. Engineering Support Services.

2.1 Boeing will, if requested by Customer, provide technical advisory assistance from the Seattle area or at a base designated by Customer as appropriate for any Aircraft or Boeing Product (as defined in Part 1 of Exhibit C of the AGTA). Technical advisory assistance provided will include:

2.1.1 Analysis of the information provided by Customer to determine the probable nature and cause of operational problems and suggestion of possible solutions.

2.1.2 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory schedule reliability and the suggestion of possible solutions.

2.1.3 Analysis of the information provided by Customer to determine the nature and cause of unsatisfactory maintenance costs and the suggestion of possible solutions.

2.1.4 Analysis and commentary on Customer's engineering releases relating to structural repairs not covered by Boeing's Structural Repair Manual including those repairs requiring advanced composite structure design.

2.1.5 Analysis and commentary on Customer's engineering proposals for changes in, or replacement of, systems, parts, accessories or equipment manufactured to Boeing's detailed design. Boeing will not analyze or comment on any major structural change unless Customer's request for such analysis and comment includes complete detailed drawings, substantiating information (including any information required by applicable government agencies), all stress or other appropriate analyses, and a specific statement from Customer of the substance of the review and the response requested.

2.1.6 One (1) evaluation of Customer's technical facilities, tools and equipment for servicing and maintaining 787 aircraft, recommendation of changes where necessary and assistance in the formulation of an initial maintenance plan for the introduction of the first Aircraft into service.

2.1.7 Assistance with the analysis and preparation of performance data to be used in establishing operating practices and policies for Customer's operation of Aircraft.

2.1.9 Assistance with interpretation of the minimum equipment list, the definition of the configuration deviation list and the analysis of individual Aircraft performance.

2.1.9 Assistance with solving operational problems associated with delivery and route-proving flights.

2.1.10 Information regarding significant service items relating to Aircraft performance or flight operations.

2.1.11 Operations engineering support during the ferry flight of an Aircraft.

2.1.12 Assistance in developing an Extended Twin Operations (ETOPs) plan for regulatory approval.

2.2 Boeing will, if requested by Customer, perform work on an Aircraft after delivery but prior to the initial departure flight or upon the return of the Aircraft to Boeing's facility prior to completion of that flight. The following conditions will apply to Boeing's performance:

2.2.1 Boeing may rely upon the commitment authority of the Customer's personnel requesting the work.

2.2.2 As title and risk of loss has passed to Customer, the insurance provisions of Article 8.2 of the AGTA apply.

2.2.3 The provisions of the Boeing Warranty in Part 2 of Exhibit C of the AGTA apply.

2.2.4 Customer will pay Boeing for requested work not covered by the Boeing Warranty, if any.

2.2.5 The DISCLAIMER AND RELEASE and EXCLUSION OF CONSEQUENTIAL AND OTHER DAMAGES provisions in Article 11 of Part 2 and Article 3.8 of Part 6 of Exhibit C of the AGTA apply.

2.3 Boeing may, at Customer's request, provide services other than those described in Articles 2.1 and 2.2 of this Supplemental Exhibit CS1 for an Aircraft after delivery, which may include, but not be limited to, retrofit kit changes (kits and/or information), training, flight services, maintenance and repair of Aircraft (Additional Services). Such Additional Services will be subject to a mutually acceptable price, schedule, scope of work and other applicable terms and conditions. The DISCLAIMER AND RELEASE and the EXCLUSION OF CONSEQUENTIAL AND OTHER DAMAGES provisions in Article 11 of Part 2 of Exhibit C of the AGTA and the insurance provisions in Article 8.2 of the AGTA will apply to any such work. Title to and risk of loss of any such Aircraft will always remain with Customer.

787 CUSTOMER SUPPORT DOCUMENT

PART 3: TECHNICAL INFORMATION AND MATERIALS

1. General.

Materials are defined as any and all items that are created by Boeing or a third party, which are provided directly or indirectly from Boeing and serve primarily to contain, convey or embody information. Materials may include either tangible embodiments (for example, documents or drawings), or intangible embodiments (for example, software and other electronic forms) of information but excludes Aircraft Software. Aircraft Software is defined as software that is installed on and used in the operation of the Aircraft.

Customer Information is defined as that data provided by Customer to Boeing which falls into one of the following categories: (i) aircraft operational information (including, but not limited to, flight hours, departures, schedule reliability, engine hours, number of aircraft, aircraft registries, landings, and daily utilization and schedule interruptions for Boeing model aircraft); (ii) summary and detailed shop findings data; (iii) aircraft readiness log data; (iv) non-conformance reports; (v) line maintenance data; (vi) airplane message data, (vii) scheduled maintenance data, and (viii) service bulletin incorporation.

Upon execution by Customer of Boeing's standard form Customer Services General Terms Agreement and Supplemental Agreement for Electronic Access Boeing will provide to Customer through electronic access certain Materials to support the maintenance and operation of the Aircraft. Such Materials will, if applicable, be prepared generally in accordance with Air Transport Association of America (ATA) iSpec 2200, entitled "Specification for Manufacturers" Technical Data." Materials not covered by iSpec 2200 will be provided in a structure suitable for the Material's intended use. Materials will be in English and in the units of measure used by Boeing to manufacture an Aircraft.

2. Materials Planning Conferences.

Customer and Boeing will conduct planning conferences approximately [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]before the scheduled delivery month of the first Aircraft in order to mutually determine (i) the Materials to be furnished to Customer in support of the Aircraft, (ii) the Customer Information to be furnished by Customer to Boeing, (iii) the update cycles of the Materials to be furnished to Customer, (iv) the update cycles of the Customer Information to be furnished to Boeing, (v) any Customer preparations necessary for Customer's transmittal of Customer Information to Boeing, and (vi) any Customer preparations necessary for Customer's electronic access to the Materials.

3. Technical Data and Maintenance Information.

Boeing will provide technical data and maintenance information equivalent to that traditionally provided in the following manuals and documents. The format for this data and information is not yet determined in all cases. Whenever possible Boeing will provide such data and information through electronic access.

a) Flight Operations Information.

Airplane Flight Manual

Operations Manual and Checklist

Planning and Performance Manual

Weight and Balance Manual

Dispatch Deviation Procedures Guide and Master Minimum Equipment List

Flight Crew Training Manual

Fault Reporting Manual

Performance Engineer's Manual

Jet Transport Performance Methods

FMC Supplemental Data Document

Operational Performance Software

ETOPS Guide Vol. III

Flight Planning and Performance Manual

b) Maintenance Information.

Maintenance Manual

Wiring Diagram Manual

Systems Schematics Manual

Structural Repair Manual

Component Maintenance Manual

Standard Overhaul Practices Manual

Standard Wiring Practices Manual

Non-Destructive Test Manual

Service Bulletins and Index

Corrosion Prevention Manual

Fault Isolation Manual

Power Plant Buildup Manual (except Rolls Royce)

In Service Activity Report

All Operators Letters

Service Letters

Structural Item Interim Advisory

Combined Index

Maintenance Tips

Configuration Data Base Generator User Guide

Production Management Data Base

Baggage/Cargo Loading Manual

Maintenance Planning.

Maintenance Review Board Report

Maintenance Planning Data Document

Maintenance Task Cards and Index

Maintenance Inspection Intervals Report

ETOPS Guide Vol. II

Configuration Maintenance and Procedures for Extended Range Operations

d) Spares Information.

Illustrated Parts Catalog

Standards Books

e) Airplane & Airport Information.

Facilities and Equipment Planning Document

Special Tool & Ground Handling Equipment Drawings & Index

Supplementary Tooling Documentation

Illustrated Tool and Equipment List/Manual

Aircraft Recovery Document

Airplane Characteristics for Airport Planning Document

Airplane Rescue and Fire Fighting Document

Engine Ground Handling Document

ETOPS Guide Vol. I

f) Shop Maintenance.

Service Bulletins

Component Maintenance Manuals and Index

Publications Index

Product Support Supplier Directory

Supplier Product Support and Assurance Agreements

g) Fleet Statistical Data and Reporting.

Fleet Message and Fault Data views, charts, and reports

4. Advance Representative Materials.

Boeing will select all advance representative Materials from available sources and whenever possible will provide them through electronic access. Such advance Materials will be for advance planning purposes only.

5. Customized Materials.

All customized Materials will reflect the configuration of each Aircraft as delivered.

6. Revisions.

6.1 The schedule for updating certain Materials will be identified in the planning conference. Such updates will reflect changes to Materials developed by Boeing.

6.2 If Boeing receives written notice that Customer intends to incorporate, or has incorporated, any Boeing service bulletin in an Aircraft, Boeing will update Materials reflecting the effects of such incorporation into such Aircraft.

7. Supplier Technical Data.

7.1 For supplier-manufactured programmed airborne avionics components and equipment classified as Seller Furnished Equipment (SFE) or Seller Purchased Equipment (SPE) or Buyer Designated Equipment (BDE) which contain computer software designed and developed in accordance with Radio Technical Commission for Aeronautics Document No. RTCA/DO-178 dated January 1982, No. RTCA/DO-178A dated March 1985, or later as available, Boeing will request that each supplier of the components and equipment make software documentation available to Customer.

7.2 The provisions of this Article will not be applicable to items of BFE.

7.3 Boeing will furnish to Customer a document identifying the terms and conditions of the product support agreements between Boeing and its suppliers requiring the suppliers to fulfill Customer's requirements for information and services in support of the Aircraft.

8. Buyer Furnished Equipment Data.

Boeing will incorporate BFE line maintenance information into the customized Materials providing Customer makes the information available to Boeing at least six (6) months prior to the scheduled delivery month of each Aircraft. Boeing will incorporate such BFE line maintenance information into the Materials prior to delivery of each Aircraft reflecting the configuration of that Aircraft as delivered. Upon Customer's request, Boeing may provide update service after delivery to such information subject to the terms of Part 2, Article 2.3 relating to Additional Services. Customer agrees to furnish all BFE line maintenance information in Boeing's standard digital format.

9. Customer's Shipping Address.

From time to time Boeing may furnish certain Materials or updates to Materials by means other than electronic access. Customer will specify a single address and Customer shall promptly notify Boeing of any change to that address. Boeing will pay the reasonable shipping costs of the Materials. Customer is responsible for any customs clearance charges, duties, and taxes.

787 CUSTOMER SUPPORT DOCUMENT

PART 4: ALLEVIATION OR CESSATION OF PERFORMANCE

Boeing will not be required to provide any Materials, services, training or other things at a facility designated by Customer if any of the following conditions exist and those conditions would prevent Boeing from performing its services or make the performance of such services impracticable or inadvisable:

1. a labor stoppage or dispute in progress involving Customer;

2. wars or warlike operations, riots or insurrections in the country where the facility is located;

3. any condition at the facility which, in the opinion of Boeing, is detrimental to the general health, welfare or safety of its personnel or their families;

4. the United States Government refuses permission to Boeing personnel or their families to enter into the country where the facility is located, or recommends that Boeing personnel or their families leave the country; or

5. the United States Government refuses permission to Boeing to deliver Materials, services, training or other things to the country where the facility is located.

After the location of Boeing personnel at the facility, Boeing further reserves the right, upon the occurrence of any of such events, to immediately and without prior notice to Customer relocate its personnel and their families.

787 CUSTOMER SUPPORT DOCUMENT

PART 5: PROTECTION OF PROPRIETARY INFORMATION

AND PROPRIETARY MATERIALS

1. General.

All Materials provided by Boeing to Customer and not covered by a Boeing CSGTA or other agreement between Boeing and Customer defining Customer's right to use and disclose the Materials and included information will be covered by and subject to the terms of the AGTA as amended by the terms of the Purchase Agreement. Title to all Materials containing, conveying or embodying confidential, proprietary or trade secret information (Proprietary Information) belonging to Boeing or a third party (Proprietary Materials), will at all times remain with Boeing or such third party. Customer will treat all Proprietary Materials and all Proprietary Information in confidence and use and disclose the same only as specifically authorized in the AGTA as amended by the terms of the Purchase Agreement, or the CSGTA, and except to the extent required by law.

2. License Grant.

2.1 Boeing grants to Customer a perpetual worldwide, non-exclusive, non-transferable license to use and disclose Proprietary Materials in accordance with the terms and conditions of the AGTA as amended by the terms of the Purchase Agreement. Customer is authorized to make copies of Materials (except for Materials bearing the copyright legend of a third party), and all copies of Proprietary Materials will belong to Boeing and be treated as Proprietary Materials under the AGTA as amended by the terms of the Purchase Agreement. Customer will preserve all proprietary legends, and all copyright notices on all Materials and insure the inclusion of those legends and notices on all copies.

2.2 Customer grants to Boeing a perpetual, world-wide, non-exclusive, non-transferable license to use and disclose Customer Information or derivative works thereof in Boeing data and information products and services provided indicia identifying Customer Information as originating from Customer is removed from such Customer Information.

3. Use of Proprietary Materials and Proprietary Information.

Customer is authorized to use Proprietary Materials and Proprietary Information for the purpose of: (a) operation, maintenance, repair, or modification of Customer's Aircraft for which the Proprietary Materials and Proprietary Information have been specified by Boeing and (b) development and manufacture of training devices and maintenance tools for use by Customer.

4. Providing of Proprietary Materials to Contractors.

Customer is authorized to provide Proprietary Materials to Customer's contractors for the sole purpose of maintenance, repair, or modification of Customer's Aircraft for which the Proprietary Materials have been specified by Boeing. In addition, Customer may provide Proprietary Materials to Customer's contractors for the sole purpose of developing and manufacturing training devices and maintenance tools for Customer's use. Before providing Proprietary Materials to its contractor, Customer will first obtain a written agreement from the contractor by which the contractor agrees (a) to use the Proprietary Materials only on behalf of Customer, (b) to be bound by all of the restrictions and limitations of this Part 5, and (c) that Boeing is a third party beneficiary under the written agreement. Customer agrees to provide copies of all such written agreements to Boeing upon request. A sample agreement acceptable to Boeing is attached as Appendix VII to the AGTA.

5. Providing of Proprietary Materials and Proprietary Information to Regulatory Agencies.

5.1 When and to the extent required by a government regulatory agency having jurisdiction over Customer or an Aircraft, Customer is authorized to provide Proprietary Materials and to disclose Proprietary Information to the agency for use in connection with Customer's operation, maintenance, repair, or modification of such Aircraft. Customer agrees to take all reasonable steps to prevent the agency from making any distribution, disclosure, or additional use of the Proprietary Materials and Proprietary Information provided or disclosed. Customer further agrees to notify Boeing immediately upon learning of any (a) distribution, disclosure, or additional use by the agency, (b) request to the agency for distribution, disclosure, or additional use, or (c) intention on the part of the agency to distribute, disclose, or make additional use of Proprietary Materials or Proprietary Information.

5.2 In the event of an Aircraft or Aircraft systems-related incident, the Customer may suspend, or block access to Customer Information pertaining to its Aircraft or fleet. Such suspension may be for an indefinite period of time.

ENGINE ESCALATION AND

ENGINE WARRANTY

between

THE BOEING COMPANY

and

CONTINENTAL airlines, inc.

Supplemental ▇▇▇▇▇▇▇ ▇▇▇ to Purchase Agreement Number 2484

1. ENGINE ESCALATION.

The Aircraft Basic Price of each Aircraft set forth in Table 1 of the Purchase Agreement includes an aggregate price for General Electric Aircraft GEnx series engines and all accessories, equipment and parts provided by the engine manufacturer (Engines). The adjustment in Engine Price applicable to each Aircraft (Engine Price Adjustment) will be determined at the time of Aircraft delivery in accordance with the following formula:

P_a = (P) (L + M) - P

Where:

P_a = Engine Price Adjustment.

L = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

x ( ECI

ECI_b) where ECI_b is the base year index
(as set forth in Table 1 of this
Purchase Agreement)

M = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] x[CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

where CPI_b is the base year index
(as set forth in Table 1 of this
Purchase Agreement)

P = Engine Price per Aircraft (as set forth in Table 1 of this Purchase Agreement).

Note: i. In determining the values of L and M, all calculations and resulting values will be expressed as a decimal rounded to the nearest ten-thousandth.

iv. The denominators (base year indices) are the actual average values reported by the U.S. Department of Labor, Bureau of Labor Statistics. The actual average values are calculated as a 3-month arithmetic average of the released monthly values (expressed as a decimal and rounded to the nearest tenth) using the values for the [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] months prior to the Engine Price base year. The applicable base year and corresponding denominator is provided by Boeing in Table 1 of this Purchase Agreement.

v. The final value of P_a will be rounded to the nearest dollar.

vi. [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2. Values to be Used if Bureau of Labor Statistics are [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT].

2.1 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2.3 [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

2.4 If within 12 months of Aircraft delivery, the published index values are revised due to an acknowledged error by the Bureau of Labor Statistics, the Engine Price Adjustment will be re-calculated using the revised index values (this does not include those values noted as preliminary by the Bureau of Labor Statistics). A credit memorandum or supplemental invoice will be issued for the Engine Price Adjustment difference. Interest charges will not apply for the period of original invoice to issuance of credit memorandum or supplemental invoice.

Note: i. The values released by the Bureau of Labor Statistics and available to Boeing 30 days prior to the first day of the scheduled delivery month of an Aircraft will be used to determine the ECI and [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] values for the applicable months (including those noted as preliminary by the Bureau of Labor Statistics) to calculate the Engine Price Adjustment for the Aircraft invoice at the time of delivery. The values will be considered final and no Engine Price Adjustments will be made after Aircraft delivery for any subsequent changes in published Index values, subject always to paragraph 2.4 above.

ii. The maximum number of digits to the right of the decimal after rounding utilized in any part of the Engine Price Adjustment equation will be 4, where rounding of the fourth digit will be increased to the next highest digit when the 5th digit is equal to 5 or greater.

3. Engine Warranty

Boeing has obtained from General Electric Company (GE) the right to extend to Customer the provisions of GE's warranty as set forth below (herein referred to as the "Warranty"); subject, however, to Customer's acceptance of the conditions set forth herein. Accordingly, Boeing hereby extends to Customer and Customer hereby accepts the provisions of GE's Warranty as hereinafter set forth, and such Warranty shall apply to all GEnx type engines (including all Modules and Parts thereof), as such terms are defined in the Warranty (GEnx type Engines) installed in the Aircraft at the time of delivery or purchased from Boeing by Customer for support of the Aircraft except that, if Customer and GE have executed, or hereinafter execute, a general terms agreement (Engine GTA), then the terms of the Engine GTA shall be substituted for and supersede the provisions of the Warranty and the Warranty shall be of no force or effect and neither Boeing nor GE shall have any obligation arising therefrom. In consideration for Boeing's extension of the GE Warranty to Customer, Customer hereby releases and discharges Boeing from any and all claims, obligations and liabilities whatsoever arising out of the purchase or use of such GEnx type Engines and Customer hereby waives, releases and renounces all its rights in all such claims, obligations and liabilities.

The Warranty is contained in the Warranty and Product Support Plan set forth in Exhibit C to the applicable purchase contract between GE and Boeing. Copies of the Warranty and Product Support Plan shall be provided to Customer by Boeing upon request.

ENGINE ESCALATION AND

ENGINE WARRANTY

between

THE BOEING COMPANY

and

CONTINENTAL airlines, inc.

Supplemental ▇▇▇▇▇▇▇ ▇▇▇ to Purchase Agreement Number 2484

1. ENGINE ESCALATION.

The Aircraft Basic Price of each Aircraft set forth in Table 1 of the Purchase Agreement includes an aggregate price for Rolls-Royce plc Trent 1000 series engines and all accessories, equipment and parts provided by the engine manufacturer (Engines). The adjustment in Engine Price applicable to each Aircraft (Engine Price Adjustment) will be determined at the time of Aircraft delivery in accordance with the following formula:

P_a = (P) (L + M) - P

Where:

P_a = Engine Price Adjustment.

L = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]

x ( ECI

ECI_b) where ECI_b is the base year index
(as set forth in Table 1 of this
Purchase Agreement)

M = [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT] x [CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT]