1
EXHIBIT 10.21
EXE TECHNOLOGIES, INC.
MASTER SOFTWARE LICENSE AGREEMENT
THIS MASTER SOFTWARE LICENSE AGREEMENT (this "Agreement") is entered
into on this 1st day of December, 1999, between EXE TECHNOLOGIES, INC., a
Delaware corporation ("EXE"), and HOME INTERIORS & GIFTS, INC., a Texas
corporation ("Customer"). Intending to be legally bound hereby, EXE and Customer
agree to the following terms and conditions:
1. DEFINITIONS.
(a) "Documentation" means the user guides and manuals for
installation and use of the Licensed Product.
(b) "Exhibit Index" means the original Exhibit Index to Master
Software License Agreement that follows the signature page of this Agreement and
each new Exhibit Index that may be attached subsequently to this Agreement
pursuant to Sections 2 and 170).
(c) "Licensed Product" means the object code version of the
software listed on the Order Forms. "Licensed Product" does not include,
however, any third party software that is subject to a separate written
agreement between Customer and such third party even if listed on an Order Form.
(d) "Nodes" means any and all devices (including, without
limitation, workstations, terminals and handheld RF devices) that permit an
individual to input data into, or otherwise access or Use, the Licensed Product.
(e) "Order Form" means each sequentially numbered order form,
beginning with the number 1, in the form attached hereto as Exhibit AI, and
which the parties have attached and may subsequently attach to this Agreement
pursuant to Section 2.
(f) Source Code means, for the applicable Licensed Product, such
Licensed Product in source code format, together with a copy of all relevant,
available and existing technical documentation.
2. ORDERING. Customer hereby orders the Licensed Product listed on Order
Form 1. Customer may, from time to time, order additional Licensed Product at
EXE's then current list price or agreed upon price subject to the following
procedure: the parties shall: (1) complete an Order Form; (2) execute a new
Exhibit Index indicating that such Order Form has been incorporated into this
Agreement by marking the relevant "Applicable" box; and (3) attach such Order
Form and Exhibit Index to this Agreement.
3. LICENSE & SCOPE OF USE.
(a) Operating Licenses. With respect to each Licensed Product
ordered by Customer pursuant to Section 2, EXE
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
2
grants to Customer a non-exclusive license (each, an "Operating License") to
install, store, load, execute and display (collectively, "Use") the Licensed
Product according to the applicable License Type (as defined in Section 3(b))
listed in the Order Form. Each Operating License shall be perpetual unless
earlier terminated pursuant to Section 14. Customer's Use of the Licensed
Product shall be limited to the United States of America and its territories and
possessions unless Exhibit C (the "International Addendum") is marked as
"Applicable" on the Exhibit Index and attached hereto.
(b) License Types. The available types of licenses ("License
Types") are as follows:
(i) Site License. A Site License authorizes Customer to
make the Licensed Product available for Use at the facility or facilities, and
by the number of Nodes, listed in the applicable Order Form in support of
Customer's internal business activities. Upon written notice to EXE, Customer
may relocate the Licensed Product from the facility or facilities where it was
originally installed and Use the Licensed Product at another facility or
facilities; provided that Customer Uses the Licensed Product obtained under a
Site License at no more than the number of facilities, and by no more than the
number of Nodes, listed in the applicable Order Form. (License Type Code: SL).
(ii) Business Unit License. A Business Unit License
authorizes Customer to make the Licensed Product available for Use by the number
of Nodes listed in the applicable Order Form in support of the internal business
activities of Customer's division or other business unit, whether or not
incorporated, listed in the applicable Order Form. (License Type Code: BUL).
(c) Transfer and Other Restrictions. Except as specifically
authorized in another provision of this Agreement, Customer may not copy,
relocate, move, sublicense, rent, timeshare, loan, lease, or otherwise
distribute the Licensed Product or operate the Licensed Product for the benefit
of third parties without EXE's prior written consent and any attempt to the
contrary shall be void and of no legal effect. If, Customer is or becomes a
third party logistics provider and Customer has disclosed such fact to EXE, then
the foregoing restriction against operating the Licensed Product for the benefit
of third parties shall not be applicable. Further restrictions are contained in
Section 10 of this Agreement.
(d) Backup Exception. Customer may make copies of the Licensed
Product solely for archival/backup purposes.
(e) Outsourcing Exception. Subject to Section 10 of this
Agreement, Customer may engage an outsourcing provider to provide information
technology services to Customer.
4. VERIFICATION AND AUDIT.
(a) Verification. Within ten (10) days after a written request by
EXE,
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
3
which request shall occur no more often than once annually, Customer shall
furnish to EXE a certification signed by an appropriate officer of Customer
certifying that Customer is Using the Licensed Product in accordance with the
terms of this Agreement.
(b) Audit. No more often than once annually, EXE may conduct
audits of Customer's Use of the Licensed Product to ensure compliance with this
Agreement (each, a "Compliance Audit"). Customer shall grant EXE, within ten
(10) days after EXE's written request, access to Customer's facilities during
Customer's regular business hours for the purpose of conducting the Compliance
Audit. EXE shall not unreasonably interfere with Customer's business activities
while conducting the Compliance Audit. If an audit reveals that Customer has
Used the Licensed Product in breach of this Agreement, then EXE may, at its
option: (i) charge Customer additional fees that reflect Customer's actual Use
of the Licensed Product, at EXE's then-current list price(s); or (ii) if such
breach is material and is not cured by Customer within ten (10) days of EXE's
written notice, EXE may terminate this Agreement; provided, however, if any such
breach results solely from Customer's Use of the Licensed Product on a temporary
basis in excess of the number of licensed Nodes to accommodate Customer's
increased orders resulting from seasonal variations, promotions, or similar
reasons such use is not a material breach of this Agreement, then EXE's sole
remedy under this Section 4(b) is to charge Customer additional license fees
that reflect Customer's actual Use of the Licensed Product at EXE's then-current
list prices. If EXE chooses to charge additional fees pursuant to this Section
4(b), then Customer shall pay such additional fees promptly upon receipt of
EXE's invoice.
5. SOURCE CODE. Customer acknowledges that no source code or
technical-level documentation is licensed under this Agreement , unless Exhibit
E-Source Code License Addendum is checked as Applicable on the Exhibit Index and
attached to this Agreement.
6. DOCUMENTATION. EXE shall provide to Customer one (1) copy of the
Documentation on computer readable media- Customer may reproduce the
Documentation solely for the purposes of any Use of the Licensed Product by
Customer authorized herein.
7. DELIVERY. EXE shall deliver the Licensed Product ordered under this
Agreement to Customer on mutually acceptable media and by mutually acceptable
means. Customer shall be deemed to have accepted each such shipment of the
Licensed Product upon shipment or complete transmission of the Licensed Product
to Customer, whichever occurs first.
8. SOFTWARE UPGRADES AND SUPPORT.
(a) Software Upgrades and Support. EXE shall not provide Customer
with error corrections, updates or other releases of the Licensed Product unless
Exhibit B 1 (the "Software Upgrade and Support Addendum") is marked as
"Applicable" on the Exhibit Index and attached hereto.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 3
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
4
(b) EXE does not provide any services under this Agreement, other
than warranty coverage as described in Section 11(a) and software upgrade and
support services pursuant to the Software Upgrade and Support Addendum.
9. PRICES & PAYMENT. The Order Form sets forth the fees for the Licensed
Product (the "License Fees"). Customer shall pay EXE the License Fees due
hereunder in accordance with the payment schedules set forth in the applicable
Order Form. Such payments become non-refundable upon shipment or transmission in
accordance with Section 7. All other invoiced amounts shall be paid within
thirty (30) days from Customer's receipt of EXE's invoice therefor. Customer may
not withhold or setoff any amounts due hereunder. Any late payment shall be
subject to EXE's costs of collection (including reasonable legal fees and costs)
and shall also bear interest at the rate of one and one-half percent (1.5%) per
month (or part thereof) or, if lower, the highest rate permitted by applicable
law until paid. Prices quoted do not include, and Customer shall pay all
sales/use, , value-added, GST, personal property or other similar taxes
(including interest and penalties imposed thereon which are caused by Customer's
late payment or failure to pay) arising from the transactions contemplated
herein, except for taxes levied on EXE's net income.
10. CONFIDENTIAL INFORMATION.
(a) Customer acknowledges that: (i) the Licensed Product and the
Source Code are and shall remain the exclusive property of EXE, its third party
suppliers, and their respective successors and assigns; and (ii) Customer has no
right, title or interest to or in the Licensed Product or the Source Code,
except as expressly granted in this Agreement.
(b) Acknowledgment. Customer hereby acknowledges that the Licensed
Product (including any Documentation, source code, translations, compilations,
partial copies and derivative works) and those materials provided under Section
17(P) of this Agreement contain confidential and proprietary information
belonging exclusively to EXE or a third party supplier of EXE ("Confidential and
Proprietary Information"). Confidential and Proprietary Information does not
include: (i) information already known or independently developed by Customer
outside the scope of this Agreement by personnel not having access to any
Confidential and Proprietary Information; (ii) information already in the public
domain through no wrongful act of Customer; or (iii) information received by
Customer from a third party who was free to disclose such information.
(c) Covenants. With respect to the Confidential and Proprietary
Information, and except as expressly authorized herein, Customer shall not use
or commercialize the Confidential and Proprietary Information or disclose
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 4
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
5
the Confidential and Proprietary Information to any person or entity including
any entity that is an affiliate of Customer, except to its own employees having
a "need to know" (and who themselves are bound by equivalent non-use and
non-disclosure obligations applicable to the Licensed Product), and to such
third parties, including, but not limited to, third party logistics providers
and outsourcing providers that (i) have first executed a confidentiality
agreement in the form attached hereto as Exhibit F; and (ii) are not an EXE
Competitor (as hereafter defined) or an affiliate of an EXE Competitor (such
third parties being "Authorized Third Parties"). An EXE Competitor means any
person or entity that offers to the public a software product that directly
competes with a Licensed Product or with EXE's other software products offered,
on the Effective Date, for warehouse distribution. Upon the written request of
EXE, Customer shall provide EXE with copies of the confidentiality agreement(s)
signed by the Authorized Third Parties. Neither Customer nor any Authorized
Third Parties shall: (i) alter or remove from any Licensed Product or associated
Documentation any proprietary, copyright, trademark or trade secret legend; or
(ii) attempt to decompile, disassemble or reverse engineer the Licensed Product
or other Confidential and Proprietary Information (and any information derived
in violation of such covenant shall automatically be deemed Confidential and
Proprietary Information owned exclusively by EXE) Customer and its Authorized
Third Parties shall use at least the same degree of care in safeguarding the
Confidential and Proprietary Information as Customer uses in safeguarding its
own confidential information, but in no event less than reasonable due diligence
and care. Upon termination of this Agreement, Customer shall, and shall cause
its Authorized Third Parties to, cease all use of, and return or destroy, all
Confidential and Proprietary Information in its or their possession or control.
The appropriate officer of Customer shall certify to EXE in writing, within
fifteen (15) days after such termination, that Customer has complied with the
obligations of the foregoing sentence.
11. WARRANTIES & INDEMNIFICATION.
(a) Limited Performance Warranty. EXE warrants to Customer that
for a period of one (1) year following delivery of the Licensed Product under
Section 7 (the "Warranty Period") the Licensed Product will operate
substantially in accordance with the applicable Documentation; provided that:
(i) the Licensed Product is installed and operated in accordance with the
Documentation; (ii) Customer notifies EXE of any alleged malfunction within ten
(10) days after Customer's discovery thereof; (iii) Customer has properly
installed all releases made available by EXE with respect to the Licensed
Product and updates recommended by EXE with respect to any third party software
products (including operating system software) that materially affect the
performance of the Licensed Product; (iv) Customer has properly maintained all
associated equipment, software and environmental conditions in accordance with
applicable specifications and industry standards that
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 5
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
6
materially affect the performance or functionality of the Licensed Product; (v)
Customer has not introduced other equipment or software creating an adverse
impact on the Licensed Product that materially affects the performance or
functionality of the Licensed Product; and (vi) Customer has paid all amounts
due hereunder not the subject of a bona fide dispute and Customer is not in
material default of any provision of this Agreement.
(b) Surreptitious Code Warranty. EXE warrants to Customer that,
except as otherwise provided in the International Addendum (if applicable), the
Licensed Product will not contain any software lock, "time bomb" or similar
disabling device (other than security features described in the Documentation)
that is intended to disable or intentionally impair the ability of the Licensed
Product to operate in accordance with this Agreement.
(c) Year 2000 Warranty; Third-Party Product Disclaimer. EXE
warrants that the Licensed Product accurately, correctly and consistently
processes date/time data (including without limitation accepting, calculating,
comparing, sorting, sequencing and returning) prior to, during and after the
calendar year 2000 A.D., including leap year calculations ("Year 2000 Ready").
NOTWITHSTANDING THE FOREGOING, EXE MAKES NO REPRESENTATIONS OR WARRANTIES
WHATSOEVER, EXPRESS OR IMPLIED (INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR USE), WITH RESPECT TO
ANY THIRD-PARTY PRODUCTS, INCLUDING, WITHOUT LIMITATION, WHETHER SUCH
THIRD-PARTY PRODUCTS ARE OR WILL BE YEAR 2000 READY OR WILL PROPERLY EXCHANGE
DATA WITH THE LICENSED PRODUCT, WHETHER OR NOT SUCH THIRD-PARTY PRODUCTS ARE
USED IN CONJUNCTION WITH, OR SHARE DATA WITH, THE LICENSED PRODUCT.
EXCEPT AS OTHERWISE AGREED TO BY EXE IN WRITING, AS BETWEEN EXE AND CUSTOMER,
ANY AND ALL THIRD-PARTY PRODUCTS ARE EXPRESSLY PROVIDED "AS IS." EXE's sole
obligation with respect to third-party products shall be to use commercially
reasonable efforts to pass through and assign to Customer any warranties
provided by the third-party vendors or suppliers that are reasonably capable of
being assigned.
(d) Warranty Disclaimer. EXCEPT AS SPECIFICALLY PROVIDED IN THIS
SECTION 11, THE LICENSED PRODUCT IS PROVIDED TO CUSTOMER WITHOUT, AND EXE
EXPRESSLY DISCLAIMS, ANY AND ALL OTHER REPRESENTATIONS AND WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WHETHER ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A
COURSE OF DEALING OR USAGE OF TRADE, INCLUDING BUT NOT LIMITED TO ANY WARRANTY
OF ACCURACY,
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 6
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
7
COMPLETENESS, PERFORMANCE, CURRENCY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NON-INFRINGEMENT OR TITLE. FURTHERMORE, THE WARRANTIES IN SECTIONS
11(a), 11(b) AND 11(c) DO NOT EXTEND TO MODIFICATIONS OF THE LICENSED PRODUCT
MADE BY CUSTOMER OR A THIRD PARTY OR TO APPLICATIONS CREATED BY CUSTOMER OR A
THIRD PARTY THROUGH USE OF A LICENSED PRODUCT, AND SUCH WARRANTIES ARE VOID TO
THE EXTENT THAT SUCH MODIFICATIONS OR APPLICATIONS CAUSE THE WARRANTY CLAIM.
(e) Non-Infringement Indemnity. EXE shall indemnify, defend and
hold harmless Customer from and against any and all claims, actions, judgments
and expenses suffered by Customer in connection with a claim or action that a
Licensed Product infringes or misappropriates any United States copyright,
patent or trade secret provided that: (i) the claimed infringement or
misappropriation does not relate to, or result from, Customer's or any third
party's modifications) of the Licensed Product or use of the Licensed Product in
combination with software or hardware not supplied or expressly approved in
writing by EXE; and (ii) Customer gives EXE prompt, written notice of any such
claim and allows EXE to control the defense and all related settlement
negotiations. If any infringement claim has occurred or in EXE's reasonable
judgment is likely to occur and EXE is required to indemnify and defend Customer
by virtue of the foregoing sentence, then Customer shall allow EXE, at EXE's
option and expense, to procure the right for Customer to continue using the
Licensed Product that is the subject of such claim, or to replace or modify such
Licensed Product so that such Licensed Product becomes non-infringing yet
remains functionally equivalent. If neither of the foregoing alternatives is
available on terms that are reasonable, in EXE's sole discretion, then Customer
shall, upon the request of EXE, return the Licensed Product to EXE, whereupon
EXE shall return to Customer an equitable portion of the License Fees paid by
Customer for such Licensed Product. This Section 11(e) states Customer's sole
and exclusive remedy arising from copyright, patent and trade secret
infringement claims made against Customer with respect to the Licensed Product,
and EXE shall incur no liability to Customer relating to such infringement
claims except as provided in this Section I 1(e).
12. LIMITATIONS OF REMEDIES & LIABILITIES. The parties acknowledge that the
following provisions have been negotiated by them, reflect a fair allocation of
risk and such allocation is reflected in the fees payable under this Agreement:
(a) Remedies. Except as otherwise provided by Section 11(e),
Customer's sole and exclusive remedies for EXE's default hereunder shall be: (i)
to obtain the repair, replacement or correction of the defective Licensed
Product; or (ii) if EXE reasonably determines that such remedy is not
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 7
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
8
economically or technically feasible, to obtain a refund of an equitable portion
of the License Fees actually paid by Customer with respect to the defective
Licensed Product.
(b) Limitations of Liability.
(i) General. EXCEPT FOR EXE'S LIABILITY ARISING UNDER
SECTION I 1(e), IN NO EVENT SHALL EXE'S OR ITS THIRD PARTY SUPPLIERS LIABILITY,
IN THE AGGREGATE, FOR DAMAGES ARISING OUT OF THE USE OR LICENSING OF THE
LICENSED PRODUCT OR ARISING UNDER THIS AGREEMENT OR THE EXHIBITS HERETO, WHETHER
IN TORT, CONTRACT OR OTHERWISE, TO CUSTOMER OR ANY OTHER PERSON OR ENTITY EXCEED
THE LICENSE FEES ACTUALLY PAID BY CUSTOMER.
(ii) Consequential Damages, Etc. as to Customer. IN NO
EVENT SHALL EXE OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR ANY CONSEQUENTIAL,
INCIDENTAL, INDIRECT, PUNITIVE, SPECIAL, OR SIMILAR DAMAGES, INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF GOOD WILL, WORK STOPPAGE,
COMPUTER FAILURE OR MALFUNCTION, LOSS OF WORK PRODUCT, OR ANY AND ALL OTHER
COMMERCIAL DAMAGES OR LOSSES, WHETHER DIRECTLY OR INDIRECTLY CAUSED, WHETHER IN
TORT, CONTRACT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
(iii) Consequential Damages as to EXE. IN NO EVENT SHALL
CUSTOMER BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, PUNITIVE,
SPECIAL, OR SIMILAR DAMAGES, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOOD WILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF WORK PRODUCT,
OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, WHETHER DIRECTLY OR
INDIRECTLY CAUSED, WHETHER IN TORT, CONTRACT, OR OTHERWISE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES; PROVIDED HOWEVER, THE PARTIES ACKNOWLEDGE THAT
ANY DIRECT OR INDIRECT DAMAGES FOR LOSS OF PROFITS BY REASON OF A BREACH BY
CUSTOMER OF SECTION 3 OR SECTION 10 OF THIS AGREEMENT SHALL NOT BE LIMITED BY
THIS SECTION.
13. TIME LIMIT FOR CLAIMS. Each party shall have two (2) years from the
accrual of a cause of action to bring such action. If a party fails to bring
such action within two (2) years of its accrual, then such party shall be deemed
to have waived whatever rights it may have had in relation to such cause of
action including all legal and equitable remedies.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 8
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
9
14. TERM AND TERMINATION.
(a) Term. This Agreement shall commence on the day first written
above and shall continue until terminated in accordance with this Section 14.
Notwithstanding the foregoing, services under the Software Upgrade and Support
Addendum shall commence and terminate as provided in the Software Upgrade and
Support Addendum.
(b) Termination. Either party may, in addition to other relief,
terminate this Agreement or any license granted hereunder if the other party
breaches any material provision hereof and fails, within thirty (30) days after
receipt of notice of such breach, to: (i) correct the breach if the breach is
capable of correction within such thirty (30) day time period; or (ii) commence
corrective action reasonably acceptable to the aggrieved party and proceed with
due diligence to completion of such action if the breach cannot be remedied
within such thirty (30) day time period.
(c) Effect of Termination. Upon termination of this Agreement, all
Operating Licenses terminate automatically, and Customer shall promptly destroy
or return to EXE all copies of the Licensed Product and Documentation. The
appropriate officer of Customer shall certify to EXE in writing, within fifteen
(15) days of such termination, that Customer has complied with the obligations
of the foregoing sentence.
(d) Survival. The provisions contained in Sections 3(c), 9, 10, 11
(e) and 12-17 shall survive the termination of this Agreement for any reason in
accordance with their respective terms.
15. DISPUTES. Exclusive venue for any and all actions arising out of this
Agreement shall lie in Dallas County, Texas.
16. EXPORT REGULATIONS.
The transfer of technology across national boundaries is regulated by
the United States Government. Customer shall not acquire, ship, transport,
export or re-export the Licensed Product, directly or indirectly, into any
country in violation of any applicable law (including, but not limited to, the
United States Export Administration Act and the regulations promulgated
thereunder) nor will Customer use the Licensed Product for any purpose
prohibited by such laws.
17. MISCELLANEOUS.
(a) Force Majeure. Neither party hereto shall have any liability
for delay or non-fulfillment of any terms of this Agreement caused by any cause
not within such party's direct control (but excluding financial inability) such
as an act of God, war, riots or civil disturbance, strikes, accident, fire,
transportation conditions, labor and/or material shortages, governmental
controls, regulations and permits and/or embargoes.
(b) Notice. All notices, certifications and other required
communications hereunder (each a "Notice") shall be in writing and shall be
given to the receiving party: (1) personally; (2) by sending a copy of
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 9
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
10
such Notice by first class, certified mail, postage prepaid, return receipt
requested; (3) by recognized overnight courier service, charges prepaid; or (4)
by facsimile, to such party's address or facsimile number set forth below or
such other address or facsimile number as the receiving party may modify from
time to time by giving notice as provided in this Section 17(b). A Notice shall
become effective on the earlier of receipt or: (i) five (5) days after deposit
in the United States mail if such Notice is properly addressed as set forth
below and sent as provided above; (ii) one (1) business day after deposit with
the courier service in the continental United States if such Notice is properly
addressed as set forth below and sent as provided above; and (iii) upon
transmission if such Notice is sent by facsimile as provided above, successful
transmission is confirmed by facsimile report, and a confirming copy of such
Notice is sent by first class, certified mail, postage prepaid, return receipt
requested.
To EXE:
EXE Technologies, Inc.
▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇
▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: C.F.O.
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
With copy to:
EXE Technologies, Inc.
▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇.
▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: General Counsel
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
To Customer before January 1, 2000:
Home Interiors & Gifts, Inc.
▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇
▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: ▇▇▇ ▇▇▇▇▇▇▇▇▇▇
Facsimile: ____________________
With copy to:
Home Interiors & Gifts, Inc.
▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇
▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇
Attention: General Counsel
Facsimile: ▇▇▇-▇▇▇-▇▇▇▇
To Customer after January 1, 2000:
Home Interiors & Gifts, Inc.
▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇, ▇▇▇▇▇ ▇▇▇
▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇-▇▇▇▇
Attention: ▇▇▇ ▇▇▇▇▇▇▇▇▇▇
Facsimile: ____________________
With copy to:
Home Interiors & Gifts, Inc.
--------------------------------
--------------------------------
Attention: General Counsel
Facsimile: ____________________
(c) Severability. If any provision of this Agreement shall be
determined to be void, invalid, unenforceable or illegal for any reason, then
the validity and enforceability of all of the remaining provisions hereof shall
not be affected thereby. Furthermore, if any particular provision of this
Agreement shall be adjudicated to be invalid or unenforceable, then such
provision shall be deemed amended by limiting and reducing it so as to be as
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 10
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
11
close to the parties' intent while remaining valid and enforceable to the
maximum extent compatible with the applicable laws of such jurisdiction, such
amendment only to apply with respect to the operation of such provision in the
applicable jurisdiction in which the adjudication is made.
(d) Waiver & Remedies. No waiver by either of the parties hereto
of any failure by the other party to keep or perform any covenant or condition
of this Agreement shall be deemed a waiver of any preceding or succeeding breach
of the same or any other covenant or condition. Except for those remedies
denominated as sole and exclusive remedies in this Agreement, the remedies
herein provided shall be deemed cumulative, and the exercise of one shall not
preclude the exercise of any other remedy nor shall the specifications of
remedies herein exclude any rights or remedies at law or in equity which may be
available.
(e) Third Party Beneficiaries. This Agreement shall inure to the
benefit of EXE and its third party suppliers.
(f) Transferability; Change of Control. Customer shall not assign,
transfer or encumber the rights granted under this Agreement or delegate the
obligations imposed on it by this Agreement, in whole or in part, without
obtaining the prior written consent of EXE which consent EXE may withhold in its
sole discretion, but which shall not be unreasonably withheld or delayed. The
word assign shall be deemed to include: (i) a sale of all or substantially all
the assets of Customer; (ii) any merger of Customer into or with another
company; and (iii) any other transaction or series of transactions which result
in a change of control of Customer. Any assignment or delegation made in breach
of this Section 17(f) shall be null and void. Notwithstanding the foregoing,
Customer may assign this Agreement, in whole, but not in part, in connection
with the sale of all or substantially all of the assets of Customer or to the
surviving entity of a transaction or series of transactions which result in a
change of control of Customer; provided that (i) the surviving entity is not an
EXE Competitor; (ii) the surviving entity agrees in writing at the time of such
assignment to be bound by the terms and conditions of this Agreement; (iii) any
and all licenses granted hereunder, through the date of such assignment, are
Licenses limited by number of Nodes (or users); and (iv) Customer promptly
provides written notice of any such assignment to EXE, together with a copy of
assignee's written agreement to be bound hereto; provided, however, if EXE has
granted one or more licenses hereunder, through the date of such assignment,
that are not Licenses limited by number of Nodes (or users) and which cannot be
assigned without EXE's consent (collectively Unlimited User Licenses ), Customer
may, in accordance with the provisions of this Section 17(f), assign this
Agreement without EXE's consent as to the licenses that are not Unlimited User
Licenses, but may not assign this Agreement as to the Unlimited User Licenses
without EXE's consent which shall not be unreasonably withheld or delayed. In
the event that, in accordance with the provisions of this Section 17(f),
Customer intends to
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 11
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
12
assign this Agreement to an affiliate of an EXE Competitor, Customer shall give
EXE prior, written notice thereof in accordance with applicable law and subject
to a mutually agreeable non-disclosure agreement.
(g) Independent Contractors. In making and performing this
Agreement, the parties act and shall act at all times as independent
contractors, and nothing contained herein shall be construed or implied to
create an agency, association, partnership or joint venture between the parties.
At no time shall either party make commitments or incur any charges or expenses
for or in the name of the other party.
(h) Titles. The titles of the Sections hereof are for convenience
only and do not in any way limit or amplify the terms and conditions of this
Agreement.
(i) Governing Law. This Agreement shall be construed and
interpreted and its performance shall be governed by the laws of the State of
Texas without regard to conflicts of law principles of any jurisdiction.
(j) Amendments. This Agreement may not be modified or amended
except in a writing executed by authorized representatives of both parties;
provided that Customer may: (1) order additional Licensed Product as provided in
Section 2; and (2) obtain the other rights (and become subject to the other
obligations) provided by the Exhibits listed on the current Exhibit Index as
"Not Applicable" if both parties complete, execute and attach hereto a new
Exhibit Index and Customer pays EXE all relevant and current fees therefor,
whereupon such new documentation shall become a supplement to this Agreement.
Any subsequent purchase orders or other standard business forms of Customer
shall not be an amendment hereto or revision hereof, whether or not received,
accepted, approved or signed by EXE.
(k) Counterparts. This Agreement, including the Exhibit Index, may
be executed in one or more counterparts, each of which shall be deemed an
original, but all of which shall constitute the same instrument.
(l) Effective Date. This Agreement shall govern the relations of
the parties as of the date first written above but shall not become effective
until authorized representatives of both parties execute this Agreement and the
Exhibit Index.
(m) Conflict. Each Exhibit hereto states whether this Agreement or
such Exhibit prevails in the event of a conflict, inconsistency or ambiguity
among this Agreement and such Exhibit.
(n) Entire Agreement. This Agreement, together with the Exhibit
Index and the Exhibits marked as "Applicable" on the Exhibit Index (which
Exhibits are incorporated herein), contains the entire agreement between the
parties hereto, and supersedes all other oral or written representations,
statements, promises, agreements and letters or other expressions of intent of
any kind with respect to the subject matter hereof between them.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 12
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
13
(o) Publicity. Neither party may use the other party's name or
marks or refer to this Agreement in any advertisement or press release or any
public manner without the prior, express, and written consent of the other
party, except as otherwise required by law or as reasonably necessary to perform
such party's obligations or to exercise such party's rights in this Agreement.
Furthermore, each party will use commercially reasonable efforts to ensure that
the other party's name is not used in customer solicitations without the other
party's prior written consent.
(p) Additional Documents. If requested in writing by Customer and
specifically subject to the confidentiality provisions of Section 10 of this
Agreement, EXE will provide to Customer any relevant, available and existing
technical documentation and Proprietary Software (as hereafter defined) for
installation and support of the Licensed Product and any available training
manuals applicable to the Licensed Product which have not already been provided
to Customer, for which Customer shall pay to EXE any associated reproduction and
shipping costs. Proprietary Software means any compilers and similar software
that are not generally available in the open market including, but not limited
to, compilers developed by EXE. EXE hereby grants a license to any and all
software provided under this Section 17(p); provided, further, that any source
code provided under this Section is subject to the provisions of Exhibit E
Source Code License Addendum.
(q) Benchmark Representation. EXE has previously performed the
performance benchmarks identified in Exhibit G attached hereto, which produced
the results identified therein. EXE makes no representation or warranty
whatsoever that Customer will achieve similar results through Customer's use of
the Licensed Product.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 13
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
14
IN WITNESS WHEREOF, EXE and Customer have caused this Agreement to be
executed by their duly authorized representatives.
EXE TECHNOLOGIES, INC. HOME INTERIORS & GIFTS, INC.
By /s/ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ By /s/ ▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇, ▇▇.
------------------------------------- -------------------------------
Name ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ Name ▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇, ▇▇.
------------------------------------ -------------------------------
Title CFO Title CEO
----------------------------------- -------------------------------
Home Interiors & Gifts, Inc. Master Software License Agreement Page: 14
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
15
EXHIBIT INDEX
TO
MASTER SOFTWARE LICENSE AGREEMENT
This Exhibit Index to the Master Software License Agreement is dated December 1,
1999. The following Exhibits, if marked as "Applicable", are incorporated by
reference into this Agreement:
(A BOX FOR EACH EXHIBIT MUST BE CHECKED)
EXHIBIT APPLICABLE NOT APPLICABLE
-------------------------------------------------------------------------------------------------------------
Exhibit A1 - Order Form 1 X
-------------------------------------------------------------------------------------------------------------
Exhibit B1 - Software Upgrade and Support
Addendum X
-------------------------------------------------------------------------------------------------------------
Exhibit C - International Addendum X
-------------------------------------------------------------------------------------------------------------
Exhibit E - Source Code Addendum X
-------------------------------------------------------------------------------------------------------------
Exhibit F - Non-disclosure Agreement X
-------------------------------------------------------------------------------------------------------------
Exhibit G - Performance Benchmarks X
-------------------------------------------------------------------------------------------------------------
IN WITNESS WHEREOF, FOR ADEQUATE CONSIDERATION AND INTENDING TO BE
LEGALLY BOUND, THE PARTIES HERETO HAVE CAUSED THIS EXHIBIT INDEX TO THE MASTER
SOFTWARE LICENSE AGREEMENT TO BE EXECUTED BY THEIR DULY AUTHORIZED
REPRESENTATIVES.
EXE TECHNOLOGIES, INC. HOME INTERIORS & GIFTS, INC.
By /s/ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ By /s/ ▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇, ▇▇.
---------------------------------- --------------------------------
Name ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ Name ▇▇▇▇▇▇ ▇. ▇▇▇▇▇▇, ▇▇.
-------------------------------- ------------------------------
Title CFO Title CEO
------------------------------- -----------------------------
Home Interiors & Gifts, Inc. Master Software License Agreement Page: Exhibit
Index
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
16
EXHIBIT A-1
ORDER FORM 1
Capitalized terms in this Exhibit A1 shall have the same meaning given to them
in the Master Software License Agreement between EXE and Customer dated December
1, 1999 (the "Agreement").
▇▇▇▇ To: Home Interiors & Gifts, Inc. Ship to: Home Interior & Gifts, Inc.
▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇ ▇▇▇▇
▇▇▇▇▇ ▇▇▇ ▇▇▇▇▇ ▇▇▇
▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇-▇▇▇▇ ▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇-▇▇▇▇
Attn: ▇▇▇▇▇ ▇▇▇▇▇▇ Attn: ▇▇▇▇▇ ▇▇▇▇▇▇
Phone: ▇▇▇-▇▇▇-▇▇▇▇ Phone: ▇▇▇-▇▇▇-▇▇▇▇
County: Dallas
------------------------------------------------------------------------------------------------------------
Licensed Product License Facility or Facilities Nodes License Fees
Type
------------------------------------------------------------------------------------------------------------
Exceed 2000
EXE Connect
RF Server
Crossdock USD477,000.00
Succeed Alert Server SL [one Home Interiors & Gifts, Inc. 200 [See Payment Terms
Labor Standards (1) site] Carrollton, Texas below.]
Exceed 4000v3.x
[current general release(s)[
------------------------------------------------------------------------------------------------------------
Payment Terms:
Customer shall pay to EXE License Fees due under this Exhibit A l in the amount
of USD477,000.00 as follows:
(a) USD190,800.00 shall be due upon execution of the Agreement;
(b) USD143,100.00 shall be due on December 30, 1999; and
(c) USD143,100.00 shall be due on May 1, 2000.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: A1-1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
17
Other Terms and Conditions:
1. Until December 31, 2000, Customer shall have the option to purchase
additional Site Licenses (20 Nodes each) for the Licensed Product(s)
ordered in this Exhibit Al at USD70,000.00 per Site License; provided
that each Customer facility licensed pursuant to this option shall
contain less than 0,000 distribution square feet.
2. Until December 31, 2000, Customer shall have the option to purchase the
following additional Licensed Products at the following license fees:
A. Succeed Warehouse Optimizer.................................USD50,000
B. The following two modules for a total of....................USD75,000
Yard & Dock
Succeed ODSS 2000
3. Until December 31, 2001, Customer shall have the option to purchase
additional Nodes for the Licensed Product(s) ordered in this Exhibit A
1 at a price not to exceed USD1,500 per additional Node.
4. Subject to Customer's execution of the additional documents described
in Section 2 of the Agreement and on the same terms and conditions of
the Agreement as applicable, Customer may exercise any and all options
to purchase pursuant to this Exhibit Al by written notice to EXE.
Payment for an option is due within 30 days after the later of the date
of delivery to Customer or Customer's receipt of EXE's invoice
therefor.
Conflict: In the event of a conflict, inconsistency or ambiguity between this
Exhibit and the Agreement, the Agreement shall prevail.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: A1-2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
18
EXHIBIT B1
SOFTWARE UPGRADE AND SUPPORT ADDENDUM
This Exhibit sets forth certain terms and conditions under which EXE
shall perform software upgrade and support services with respect to the Licensed
Product(s) licensed to Customer pursuant to Exhibit A1 of the Master Software
License Agreement, dated December 1, 1999, between EXE and Customer (the
"Agreement") and is subject to all of the terms and conditions of the Agreement
and of this Exhibit. In the event of a conflict, inconsistency or ambiguity
between this Exhibit and the Agreement, the Agreement shall prevail.
Section 1. Defined Terms. Unless otherwise defined herein, capitalized
terms in this Exhibit B 1 shall have the same meaning given to them in the
Agreement to which this Exhibit is attached.
Section 2. Term. The initial term of this Exhibit shall commence on the
day this Exhibit is incorporated into the Agreement and shall run for a period
of one (1) year (the "Initial Term"). This Exhibit shall automatically renew for
successive one-year periods (each such period being a "Renewal Term" commencing
on the first day after the expiration of the Initial Term) up to a maximum of
four Renewal Terms, unless Customer gives written notice to EXE of the
Customer's intent to terminate this Exhibit at least thirty (30) days prior to
the expiration of the Initial Term or Renewal Term, as the case may be. If not
previously terminated by Customer as provided for in this Section 2, this
Exhibit shall terminate upon the earlier to occur of (i) expiration of the
fourth Renewal Term; or (ii) termination of the Agreement.
Section 3. Scope of Support Services - Worldwide Support Center.
(a) EXE's Worldwide Support Center shall provide a telephone help
line twenty-four (24) hours per day, seven (7) days per week, excluding
holidays.
(b) EXE shall allocate a support engineer to any error in the
Licensed Product reported to the Worldwide Support Center. The support engineer
will then be responsible for arranging for diagnosis of the error. If EXE
determines that such error is in unmodified Licensed Product, EXE shall use its
commercially reasonable efforts to resolve the errors within a reasonable period
of time. For the avoidance of doubt, neither Releases (as defined below)
delivered by EXE pursuant to this Exhibit nor the implementation of such
Releases alone shall constitute modifications under this Section 3(b). Customer
shall be responsible for implementing any error corrections or other Releases
supplied by EXE. Schedule 1 to this Exhibit B 1 sets forth EXE's current
estimated response times.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: B1-1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
19
Section 4. Scope of Software Upgrade Services. EXE shall license and
deliver to Customer all error corrections, updates and other releases of the
Licensed Product listed on the Order Forms (collectively "Releases"), and a copy
of the Source Code therefor, if and when such Releases and Source Code become
available.
Section 5. Payment. Customer shall pay EXE fees for the Initial Term of
software upgrade and support services as follows:
(a) USD25,100.00 shall be due upon execution of the Agreement
(based on an annual amount of 10% of the License Fees due under Exhibit A 1 of
the Agreement, prorated from execution through April 30, 2000);
(b) USD50,200.00 shall be due by April 30, 2000 (based on an
annual amount of 20% of the License Fees due under Exhibit A 1 of the Agreement,
prorated from May 1, 2000 through the end of the Initial Term).
EXE may increase the fees due hereunder for Renewal Terms; provided
that (i) EXE notifies Customer in writing of such an increase at least sixty
(60) days prior to the expiration of the Initial Term or Renewal Term as the
case may be; and (ii) for the first three (3) Renewal Terms, each such increase
shall not exceed five percent (5(degree)/0) annually. Customer shall pay the
fees for Renewal Terms net thirty (30) days from Customer's receipt of EXE's
invoice therefor.
Section 6. Coordination with Agreement. Releases shall be considered
Licensed Product for all purposes of the Agreement and the Exhibits thereto
except that the warranty period in Section 11(a) of the Agreement shall not
begin to run with respect to a Release until delivery of such Release to
Customer.
Section 7. Customer's Responsibilities. Customer shall designate up to
three (3) persons and may designate up to three alternates to contact EXE's
Worldwide Support Center (collectively the "Project Manager"). The Project
Manager must be fully acquainted with Customer's information technology systems
including the Licensed Product. Customer is responsible for integration and
installation of all Releases. Customer is exclusively responsible for the
supervision, management, backup, security and control of all aspects of
Customer's information technology systems.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: B1-2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
20
Schedule 1 to Exhibit B1
-------------------------------------------------------------------------------------------------------------
EXE Issue Classification EXE Assignment Issue Escalated to
Classification Definition Timeframe who and when... Other
-------------------------------------------------------------------------------------------------------------
Severity 1 Down production Immediately assigned Escalated within an At 6 hours the SVP
system. Warehouse to support analyst hour if problem is of R&D and
operations have qualified to work on not isolated and Professional
stopped. issue. EXE will fixed. At 3 hours Services are
work around the the Director of WWCS notified.
clock on issue until is notified. At 4
either fix or hours the VP of
workaround provided. Worldwide Customer
Support is
notified along
with the
customer EXE
Regional VP.
-------------------------------------------------------------------------------------------------------------
Severity 2 Down business process Assigned to support Escalated within 4 R&D will work on
with workaround. analyst. Attempt to days after work this to resolve or
Operations continue Resolved within 4-8 began. At 4 days provide ability to
but at reduced rate. business days. If the WWCS Director is move it to
Needs to be not resolved within notified. After 8 Severity 3. SVP
resolved. Urgent but eight (8) days, days the VP of of R&D and
not critical. issue becomes Worldwide Customer Professional
Severity 1. Support is notified Services are
and if a Base notified after 8
problem, escalated days.
to R&D. Regional VP
is notified as well.
-------------------------------------------------------------------------------------------------------------
Severity 3 Problem with Assigned to support Will be tracked with
software. Not analysis a goal to close
impacting operations (PMT-Product within the next
adversely. Important Maintenance Team). product release.
but not urgent. If not resolved
within 90 days,
issue becomes
Severity 2.
-------------------------------------------------------------------------------------------------------------
Severity 4 Software or Assigned to support Will be tracked with
documentation bug analyst (PMT). If a goal to be closed
that can wait until not resolved in the within the next
next release. Not next product product release.
urgent. release, issue
becomes Severity 3.
-------------------------------------------------------------------------------------------------------------
Customer may update status of issues by calling Worldwide Support.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: B1-3
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
21
EXHIBIT C
INTERNATIONAL ADDENDUM
This Exhibit sets forth certain terms and conditions of EXE's provision
of the Licensed Product in accordance with the Master Software License
Agreement, dated December 1, 1999, between EXE and Customer (the "Agreement")
and is subject to all of the terms and conditions of the Agreement and of this
Exhibit. In the event of a conflict, inconsistency or ambiguity between this
Exhibit and the Agreement, this Exhibit shall prevail.
Section 1. Defined Terms.
(a) Unless otherwise defined herein, capitalized terms in this
Exhibit C shall have the same meaning given to them in the Agreement to which
this Exhibit is attached.
(b) "Territory" shall mean the geographical location where
Customer is licensed to Use the Licensed Products outside of the United States.
Section 2. United Nations Convention on Contracts. EXE and Customer expressly
agree that the United Nations Convention on Contracts for the International Sale
of Goods shall not apply to the Agreement.
Section 3. Shipment Term. EXE shall ship the Licensed Products to Customer "Free
Carrier" (as defined in Incoterms 1990) EXE's place of business; provided that
title to the media containing the Licensed Product shall not pass to Customer
until the media leaves territory under the jurisdiction of the United States.
Section 4. Protection Devices. At EXE's request, Customer shall use EXE's
hardware-based copy protection device (EXE's currently supported device is
Rainbow Technology's Net Sentinel) on all installations of the Licensed Product
outside of the United States and Canada to enable the copy protection features
of the Licensed Product at those sites. ABSENCE OF THE DEVICE WHEN PROTECTION IS
ENABLED CAUSES THE DEACTIVATION OF CERTAIN KEY FUNCTIONS OF THE LICENSED PRODUCT
(SUCH AS PRINTING, DATA IMPORT AND EXPORT) BUT DOES NOT DAMAGE OR OTHERWISE
AFFECT EXISTING DATA. Customer acknowledges that this additional protection is
required by the lack of controls on software piracy in many markets. Customer
shall acquire the required number of devices (one per network) from EXE.
Customer shall pay for the devices at EXE's cost, plus reasonable costs of
shipment and handling, within thirty (30) days of Customer's receipt of EXE's
invoice therefor.
Section 5. Disputes. Exclusive venue for any and all actions arising out of this
Agreement shall lie in Dallas County, Texas, U.S.A..
Home Interiors & Gifts, Inc. Master Software License Agreement Page: C-1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
22
Section 6. Compliance with Laws and Regulations.
(a) Compliance with Local Law. Customer shall not undertake, cause
or permit to be undertaken, any activity that is illegal under any laws,
decrees, rules or regulations in effect in the Territory.
(b) Compliance with United States Law. Notwithstanding Section
6(a) of this Exhibit C, Customer shall not undertake, cause or permit to be
undertaken, any activity that would have the effect of causing EXE to be in
violation of any laws, decrees, rules or regulations in effect in the United
States or the Territory. Customer shall also comply with the requirements of the
United States Foreign Corrupt Practices Act and United States Anti-Boycott
Regulations (in present form or as they may be amended in the future) as they
may apply to Customer's activities. Customer shall comply, and shall at all
times cooperate promptly with EXE to enable EXE to comply, with the provisions
of the United States Export Administration Act, the War Powers Act, or any other
law or Executive Order relating to control of exports or transfer of technology,
and the regulations of the United States Departments of State, Commerce and
Defense relating thereto, (in present form or as they may be amended in the
future) as they may apply to Customer's activities.
(c) Compliance with Export Laws and Regulations. The Agreement and
Customer's performance thereof are specifically made subject to all laws,
regulations, orders or other restrictions on the export from the United States
of America of computer software, hardware, communications equipment and
technical knowledge or know-how relating thereto, which may be imposed from time
to time by the federal government of the United States of America. Customer
shall not export, re-export or transfer, directly or indirectly, any such
software, hardware, communications equipment or information to any country for
which the United States Government or any agency thereof requires, with respect
to United States exporters, an export license or other governmental approval at
the time of export, re-export, or transfer, without first obtaining such license
or approval.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: C-2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
23
EXHIBIT E
SOURCE CODE LICENSE ADDENDUM
This Exhibit sets forth the terms and conditions of EXE's provision of
source code to the Licensed Product, as may be modified by EXE from time to
time, and related documentation (collectively, the "Source Code") in accordance
with the Master Software Agreement, dated December 1, 1999, between EXE and
Customer (the "Agreement") and is subject to all of the terms and conditions of
the Agreement and of this Exhibit. In the event that any of the terms of this
Exhibit conflict with the Agreement, this Exhibit shall control.
Section 1. Defined Terms. Capitalized terms in this Exhibit E shall have the
same meaning given to them in the Agreement to which this Exhibit is attached.
Section 2. Source Code License. Except upon a Release Event, as hereinafter
defined or for the purposes of verification, (a) Customer may not Use the Source
Code for any purpose; (2) Customer may not modify the Source Code; and (3)
Customer shall keep the Source Code in a location accessible only to officers of
the Customer or upon Customer's computer system in a secure environment
accessible only by password known to one or more officers of Customer. A Release
Event means one or more of the following events: (i) EXE has ceased to offer the
Licensed Product for licensing; (ii) EXE has materially failed to provide
support services for the Licensed Product in accordance with its contractual
obligations to Customer in accordance with Exhibit B I of the Agreement; (iii)
EXE has ceased business operations; or (iv) EXE becomes insolvent, makes an
assignment for the benefit of its creditors, a receiver is appointed, or a
petition in bankruptcy is filed with respect to EXE and such petition is not
dismissed within thirty (30) days. From time to time, Customer may, in its sole
discretion, use reasonable means to verify that the Source Code is the correct
version for the then-current executable form of the Licensed Product. Such
reasonable means include, but are not limited to, compiling the Source Code.
Section 3. Additional Restrictions. Customer may not and shall not at any time:
(a) distribute, transfer, rent, lease, sublicense, time-share or lend the Source
Code (including any extract, copy or transcription thereof, any derivative works
thereof or any object code produced therefrom) to any third party, except that
providing the Source Code (or the object code produced therefrom) to an
Authorized Third Party in support of Customer's authorized use of a Licensed
Product does not violate the provisions of this Section; (b) use the Source
Code, any derivative works thereof or any object code produced therefrom for the
benefit of any third party, except as permitted by the Agreement; or (c) remove
or obscure EXE's copyright, trademark and proprietary information notices from
the Source Code. Customer shall not make
Home Interiors & Gifts, Inc. Master Software License Agreement Page: E-1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
24
copies of the Source Code; provided that during the term of this Exhibit E,
Customer may maintain a total of two (2) copies of the Source Code under its
possession or control (one of which is the copy of the Source Code delivered by
EXE to Customer). Customer shall inform EXE the location of each copy of the
Source Code and shall not relocate any copy of the Source Code to a location
other than the location of the associated Licensed Product without EXE s prior
written consent which consent shall not be unreasonably delayed or withheld.
Section 4. Delivery. EXE shall deliver the Source Code to Customer on mutually
acceptable media and by mutually acceptable means. Customer shall be deemed to
have accepted the Source Code and Source Code License upon shipment or complete
transmission of the Source Code to Customer, whichever occurs first.
Section 5. Exclusive Ownership.
(a) Exclusive Ownership. The Source Code License does not provide
Customer with title to or ownership of the Source Code or the Licensed Product.
Rather, the Source Code License provides Customer with only the limited rights
set forth in this Exhibit.
(b) Acknowledgment of Proprietary Features. Customer acknowledges
that the Source Code is a commercially valuable, highly proprietary product of
EXE and that its design and development reflect the effort of skilled
development experts and the investment of considerable time and money. Customer
acknowledges that the Source Code contains substantial trade secrets of EXE,
which EXE has entrusted to Customer in confidence to use only as expressly
authorized by this Exhibit E. Customer further acknowledges that the Source Code
License in no way allows Customer to distribute derivative works created using
or from the Source Code (including object code) to a third party or to the
public in general. Customer further acknowledges that EXE claims and reserves
all rights and benefits that are afforded under federal copyright law with
respect to software programs. Any copying, modification or distribution of the
Source Code not expressly authorized by this Exhibit E is strictly forbidden.
Section 6. Confidentiality. Customer shall not, at any time, disclose or
disseminate the Source Code (including any extract, copy or transcription
thereof), or the trade secrets embodied therein, whether in whole or in part,
except to those employees, consultants, contractors or other persons who: (a)
have a need to know and to obtain access thereto in order to give effect to the
rights granted to Customer under this Exhibit; (b) are not EXE Competitors; and
(c) have signed agreements with respect to the Source Code containing
non-disclosure and non-use provisions substantially equivalent to those set
forth in this Exhibit. Customer shall take appropriate action, by instruction,
agreement, and otherwise, with any persons authorized to have access to the
Source Code, so as to enable Customer to fulfill the foregoing obligations.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: E-2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
25
Under no circumstances may Customer give any known EXE Competitor direct access
to the Source Code without the prior written consent of EXE in its sole
discretion.
Section 7. Term. The term of the Source Code License shall commence upon the
incorporation of this Exhibit E into the Agreement and shall continue until the
earlier of the termination of the Agreement or the date upon which Customer
ceases to use the Licensed Product. Upon the termination of the Source Code
License, Customer shall return to EXE all copies of the Source Code in its
possession or under its control, but Customer's obligation to protect the
confidentiality of the Source Code shall continue.
Section 8. Injunctive Relief. Customer acknowledges that it is impossible to
measure fully, in monetary damages, the injury that will be caused to EXE in the
event of a breach or threatened breach of any of the provisions of this Exhibit
E, and Customer waives the claim or defense that EXE has an adequate remedy at
law. Customer shall not in any action or proceeding to enforce any of the
provisions of this Exhibit, assert the claim or defense that an adequate remedy
at law exists. EXE shall be entitled to injunctive relief to enforce the
provisions hereof, without prejudice to any other remedy EXE may have at law or
in equity.
Section 9. No Warranty. THE SOURCE CODE IS PROVIDED TO CUSTOMER WITHOUT, AND EXE
EXPRESSLY DISCLAIMS, ANY AND ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WHETHER ARISING BY STATUTE OR OTHERWISE IN LAW OR FROM A COURSE OF
DEALING OR USAGE OF TRADE, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
ACCURACY, COMPLETENESS, PERFORMANCE, CURRENCY, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NON-INFRINGEMENT OR TITLE. Customer acknowledges that the
warranties in Sections 11(a), 11(b) and 11(c) of the Agreement do not extend to
the Source Code or to applications created by Customer or a third party through
use of the Source Code.
Section 10. Limitations of Liabilities. The parties acknowledge that the
following provisions have been negotiated by them, reflect a fair allocation of
risk and such allocation is reflected in the fees payable under this Agreement:
(a) General. IN NO EVENT SHALL EXE'S LIABILITY, IN THE AGGREGATE,
FOR DAMAGES ARISING OUT OF THE USE OR LICENSING OF THE SOURCE CODE, WHETHER IN
TORT, CONTRACT OR OTHERWISE, TO CUSTOMER OR ANY OTHER PERSON OR ENTITY EXCEED
THE FEES ACTUALLY PAID BY CUSTOMER FOR THE SOURCE CODE LICENSE.
(b) Consequential Damages, Etc. EXE SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL, INCIDENTAL, INDIRECT, PUNITIVE, SPECIAL, OR SIMILAR DAMAGES,
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF GOODWILL,
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF WORK PRODUCT, OR ANY AND
ALL OTHER COMMERCIAL DAMAGES OR LOSSES, WHETHER DIRECTLY OR INDIRECTLY CAUSED,
WHETHER IN TORT, CONTRACT. OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: E-3
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
26
EXHIBIT F
NON-DISCLOSURE AGREEMENT
THIS NON-DISCLOSURE AGREEMENT (this Agreement ) is made on between HOME
INTERIORS & GIFTS, INC., a Texas corporation ( Home Interiors ), and a [STATE OF
ORIGIN] [LEGAL ENTITY] (the Agent).
BACKGROUND
The Agent provides contracted services for Home Interiors & Gifts, Inc.
( Home Interiors ) at Home Interiors' facility located at [INSERT ADDRESS OF THE
SITE]. Home Interiors has obtained from EXE Technologies, Inc. ( EXE ) a license
to use the object code and/or Source Code version(s) of certain EXceed or other
EXE software (the Software ) at the Facility pursuant to a Master Software
License Agreement between EXE and Home Interiors (the License ), as it is
installed at the Facility. The Agent and Home Interiors desire the Agent to be
an authorized user of the Software under the License exclusively in support of
Home Interiors' internal business activities. EXE has granted Home Interiors the
right to make the Agent an authorized user of the Software exclusively in
support of Home Interiors' internal business activities; provided that the Agent
first enters into this Agreement. For the avoidance of doubt, the internal
business activities of Customer are deemed to include Customer's use of a
Licensed Product as a third party logistics provider and Customer's use of an
outsourcing provider to supply information technology services to Customer.
NOW, THEREFORE, in consideration of the foregoing premises and making
the Agent an authorized user of the Software, intending to be legally bound, the
Agent and Home Interiors agree as follows:
1. Acknowledgments. The Agent acknowledges that: (i) the Software and any
and all associated documentation, source code, translations, compilations,
partial copies and derivative works (collectively, Confidential and Proprietary
Information ) is valuable, confidential and proprietary property owned
exclusively by EXE; (ii) the Agent has no right, title or interest to or in any
of the Confidential and Proprietary Information; (iii) the Agent itself has no
license to any of the Confidential and Proprietary Information, rather the Agent
is merely an authorized user of the Software under the License between EXE and
Home Interiors; (iv) all use of the Software is governed by the License,
including limiting Agent's use of the software under the Agreement exclusively
to support Home Interiors' internal business activities and for no other
purpose; and (v) this Agreement in no way expands the rights granted under the
License.
2. Negative Covenants. The Agent shall not: (a) use any of the
Confidential and Proprietary Information for any person's benefit (including the
Agent's) except that the Agent may (i) review Documentation for the Software to
become familiar with its
Home Interiors & Gifts, Inc. Master Software License Agreement Page: F-1
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
27
operation and (ii) use the Software solely for Home Interiors' benefit at the
Facility in accordance with the terms of the License; (b) disclose the
Confidential and Proprietary Information; (c) except as authorized in the
License, copy, relocate, move, rent, loan, lease, commercialize or otherwise
distribute any of the Confidential and Proprietary Information; (d) alter or
remove any proprietary, copyright, trademark or trade secret legend affixed to
or embedded in the Confidential and Proprietary Information; or (e) attempt to
decompile, disassemble or reverse engineer the Software or any other
Confidential and Proprietary Information (and any information derived in
violation of such covenant shall automatically be deemed Confidential and
Proprietary Information owned exclusively by EXE).
3. Affirmative Covenants. The Agent shall: (a) immediately consult with
Home Interiors if it has any questions regarding the permitted use of the
Confidential and Proprietary Information; (b) shall take all reasonable measures
to protect the secrecy of, and avoid the unauthorized disclosure or use of
Confidential and Proprietary Information including (i) the highest degree of
care that the Agent uses to protect the Agent's own confidential and proprietary
information of a similar nature, but no less than due diligence and care and
(ii) requiring its employees and consultants who have access to any of the
Confidential and Proprietary Information to sign or have signed an agreement
with provisions that are substantially equivalent to the terms of this
Agreement; and (c) promptly inform Home Interiors in writing of any disclosure,
misuse or misappropriation of any Confidential and Proprietary Information that
may come to the Agent's attention including, without limitation, any use of the
Software beyond the terms of the License.
4. Termination. Upon the earlier to occur of (a) termination of the
License or (b) any breach of this Agreement, the Agent shall immediately: (i)
cease all use of the Confidential and Proprietary Information; (ii) return or
destroy all Confidential and Proprietary in its possession or control; and (iii)
certify to Home Interiors in writing that the Agent has complied with the
obligations of this Section.
5. Notice of Required Disclosure. If the Agent is required by judicial or
administrative process to disclose any of the Confidential and Proprietary
Information, then the Agent shall promptly notify Home Interiors and allow Home
Interiors and/or EXE a reasonable time to oppose such process.
6. Successors; Assignment. This Agreement shall be binding upon the Agent
and the Agent's successors and assigns; provided, however, that this Agreement
and the rights and obligations thereunder may not be assigned or delegated, in
whole or in part, without the prior written consent of Home Interiors.
7. Governing Law; Jurisdiction. This Agreement any dispute arising
hereunder shall be governed by the laws of the State of Texas without regard to
any conflict of law rules of any jurisdiction. The Agent irrevocably and
unconditionally: (a) agrees that any suit, action or other legal proceeding
arising out of or relating to this Agreement (including, without limitation, any
action for preliminary and permanent injunctive relief and other
Home Interiors & Gifts, Inc. Master Software License Agreement Page: F-2
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
28
equitable relief) may be instituted in the State of Texas or federal courts in
the Northern District of Texas, Dallas Division; (b) consents to personal
jurisdiction in such courts and further agrees that service of process upon the
Agent may be effected by certified mail or by any other means permitted by law;
(c) waives any objection that the Agent may have to the laying of venue of any
such suit, action or proceeding in any such court; and (d) waives any claim or
defense of inconvenient forum. Any judgment entered in such courts may be
enforced against the Agent in any court of competent jurisdiction.
8. Remedies. The Agent acknowledges that: (a) its obligations under this
Agreement are necessary and reasonable to protect Home Interiors and EXE and
Home Interiors' and EXE's businesses; (b) any violation or threatened violation
of the Agent's covenants and agreements set forth in this Agreement will cause
irreparable injury to Home Interiors and EXE; and (c) monetary damages will be
inadequate to compensate Home Interiors and EXE for any such violation or
threatened violation. In addition to any other remedies that may be available,
in law, in equity or otherwise, Home Interiors and EXE shall be entitled to
obtain injunctive relief to enforce the provisions of this Agreement.
9. Third Party Beneficiary. Agent and Home Interiors acknowledge that EXE
is an intended third party beneficiary of this Agreement.
10. Entire Agreement. This Agreement contains the entire agreement and
understanding relating to the subject matter hereof and merges and supersedes
all prior discussions, agreements and understandings. This Agreement may not be
changed or modified, except in a writing signed by both the Agent and Home
Interiors. The failure or delay of Home Interiors or EXE to exercise any right
under this Agreement shall not be deemed a waiver of any rights under this
Agreement.
Home Interiors & Gifts, Inc. Master Software License Agreement Page: F-3
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
29
IN WITNESS WHEREOF, the Agent has caused its duly authorized
representatives to execute this Agreement on the date first written above.
[AGENT NAME] HOME INTERIORS & GIFTS, INC.
By By
------------------------- ----------------------------------
Name Name
----------------------- -------------------------------
Title Title
---------------------- ------------------------------
Home Interiors & Gifts, Inc. Master Software License Agreement Page: F-4
EXE Technologies, Inc. Contract No. LTOD-4BQJPW
30
CONFIDENTIALITY AND NONDISCLOSURE AGREEMENT
This Agreement, dated as of October 29, 1999, is by and between Home
Interiors & Gifts, Inc., a Texas corporation (the "Home Interiors"), and EXE
Technologies, Inc., a Delaware corporation ( "EXE").
In connection with a consulting relationship between Home Interiors and
EXE, Home Interiors and EXE are disclosing to each other certain of their
proprietary information. As a material inducement to each party to disclose such
information, the party receiving (the "Receiving Party") any information
concerning the other party (the "Disclosing Party") agrees to treat
confidentially all information concerning the Disclosing Party furnished to the
Receiving Party, whether or not in writing (collectively, the "Evaluation
Material"), in accordance with the provisions of this Agreement. The Evaluation
Material will not, however, include information which (a) is or becomes publicly
available other than as a result of a disclosure by the Receiving Party or its
representatives, (b) is in the possession of or known to the Receiving Party
prior to its receipt from the Disclosing Party, (c) is independently developed
by the Receiving Party without the utilization of any Evaluation Material, or
(d) is or becomes available to the Receiving Party on a non-confidential basis
from a source (other than the Disclosing Party or its representatives) which, to
the best of the Receiving Party's knowledge after due inquiry, is not prohibited
from disclosing such information to the Receiving Party by a legal, contractual
or fiduciary obligation to the Disclosing Party.
The Evaluation Material shall be used solely for the purposes described
above and for no other purpose, and the Receiving Party and its representatives
shall not, without the Disclosing Party's prior written authorization, directly
or indirectly, intentionally or inadvertently, through its agents,
representatives, employees or otherwise, (a) disclose the contents of any of the
Evaluation Material received from the Disclosing Party or of the discussions
between the parties to any other person or use or exploit the Evaluation
Material received from the Disclosing Party, or (b) discuss the Disclosing Party
or its affairs with any person other than the Disclosing Party's
representatives. Neither party shall disclose to any other person either the
fact that any discussions are taking place between the parties or that either
party has requested or received information from the other party or any of the
terms, conditions or other facts with respect to the relationship between the
parties, including the status thereof. The term "person" as used herein shall be
broadly interpreted to include without limitation any corporation, partnership,
company, association, mutual fund or other organization, group or individual.
Each party reserves the right, in its sole and absolute discretion, to reject
any and all proposals and to terminate discussions with, or directly or
indirectly involving, the other party at any time without affecting the either
party's obligations hereunder.
If the Receiving Party is requested or required (by oral questions,
interrogatories, requests for information or documents, subpoenas, civil
investigative demands or similar processes) to disclose the contents of any
Evaluation Material received from the
1
31
Disclosing Party, the Receiving Party shall (i) provide the Disclosing Party
with prompt notice of such request and the information requested so that the
Disclosing Party may seek an appropriate protective order and/or waive the
Receiving Party's compliance with the provisions of this Agreement, and (ii)
consult with the Disclosing Party as to the advisability of taking legally
available steps to resist or narrow such request. If in the absence of a
protective order or the receipt of a waiver hereunder the Receiving Party is
nonetheless, in the written opinion of its legal counsel, compelled to disclose
the contents of any Evaluation Material received from the Disclosing Party to
any tribunal or else be or risk being liable for contempt or suffer other
censure or penalty, the Receiving Party may disclose such information to such
tribunal; provided, however, that the Receiving Party shall give the Disclosing
Party written notice of the information to be so disclosed as far in advance of
its disclosure as is practicable and shall use its commercially reasonable
efforts to obtain an order or other reliable assurance that confidential
treatment shall be afforded to such portion of the contents of any Evaluation
Material received from the Disclosing Party required to be disclosed as the
Disclosing Party designates.
At any time upon the Disclosing Party's request, the Receiving Party
shall promptly deliver to the Disclosing Party all written material based on,
containing or reflecting any information contained in the Evaluation Material
(whether prepared by the Disclosing Party, the Receiving Party or otherwise, and
whether in the possession of the Receiving Party or of its agents,
representatives or employees), including all memoranda, notes, summaries,
compilations and analyses, and shall not retain any copies, extracts or other
reproductions, in whole or in part, of such material. The delivery of such
material shall not relieve the Receiving Party of its confidentiality or other
obligations hereunder.
The Receiving Party understands that the Disclosing Party makes no
representation or warranty as to the accuracy or completeness of the Evaluation
Material received from the Disclosing Party. The Receiving Party agrees that the
Disclosing Party shall not have any liability to the Receiving Party or any of
its agents, representatives or employees resulting from the Receiving Party's
reliance on the Evaluation Material received from the Disclosing Party.
Each party understands and agrees that money damages would not be an
adequate remedy for any breach of this Agreement and that the other party shall
be entitled to specific performance and injunctive or other equitable relief as
a remedy for any such breach, and each party further agrees to waive any
requirement for the securing or posting of any bond or any other security in
connection with such remedy. Such remedy shall not be deemed to be the exclusive
remedy for any breach of this Agreement, but shall be in addition to all other
remedies available at law or in equity. Except as specifically provided
otherwise herein, the obligations under this Agreement shall continue
indefinitely and in perpetuity.
2
32
If either party brings any legal action or other proceeding to enforce
this Agreement or as a result of a dispute, breach or default by the other party
of any of the provisions hereunder, the prevailing party in such action or
proceeding shall be entitled to recover its attorneys' fees and other costs
incurred in connection therewith. This Agreement shall be performable in Dallas
County, Texas, and shall be governed by and construed in accordance with the
laws of the State of Texas. The parties hereby irrevocably and unconditionally
consent to submit to the jurisdiction of the courts of the State of Texas for
any actions, suits or proceedings arising out of or relating to this Agreement
(and agree not to commence any action, suit or proceeding relating thereto
except in such courts), and further agree that service of any process, summons
or notice by U.S. registered mail to the addresses set forth below shall be
effective service or process for any action, suit or proceeding brought in any
such court. The parties hereby irrevocably and unconditionally waive any
objection to the laying of venue of any action, suit or proceeding arising out
of this Agreement in the courts of the State of Texas.
3
33
IN WITNESS WHEREOF, the undersigned, acting on their own behalf and on
behalf of all of their subsidiaries and other affiliates as if they had executed
this Agreement, have executed this Agreement as of the date first above written.
Home Interiors & Gifts, Inc.
By: /s/ ▇▇▇ ▇▇▇▇▇▇▇▇▇▇
------------------------------------
Its:
-----------------------------------
Address: ▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇
▇▇▇▇▇▇, ▇▇▇▇▇ ▇▇▇▇▇
EXE Technologies, Inc.
By: /s/ ▇▇▇▇▇▇ ▇▇▇ ▇▇▇▇
------------------------------------
Its:
-----------------------------------
Address: ▇▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇
▇▇▇▇▇▇, ▇▇▇▇▇ ▇▇▇▇▇
4
34
EXHIBIT G
WHITE PAPER
EXCEED 2000 PERFORMANCE BENCHMARKS
FOR INFORMIX
35
EXCEED 2000 PERFORMANCE BENCHMARKS
Purpose of this White Paper:
The purpose of this white paper is to provide an overview of the EXceed
2000 Performance Benchmarks for Informix, using the IBM S80 platform.
The benchmarking process and results are documented in this paper.
Audience:
This paper is suitable for publication to internal and external
audiences.
36
EXCEED 2000 PERFORMANCE BENCHMARKS
BENCHMARK DEFINITION
Most high volume distribution centers focus on the ability of the WMS
system to process waves of orders in the shortest possible timeframe.
The trend in distribution logistics is toward shorter order cycle
times, putting pressure on the distribution center to be able to turn
customer orders around in a faster and faster manner. The days of
receiving a customer order today and shipping it tomorrow is rapidly
moving to receiving a customer order now, making a delivery promise
instantly, and shipping to meet that delivery promise. In short,
distribution managers and executives care about how quickly a system
can take a customer order and turn it into work that can be given to an
associate to select that customer order.
Given the above operational description, EXE defines the performance
throughput capabilities of the EXceed 2000 system in order lines per
minute through the wave planning process. In ▇▇▇▇▇▇'▇ terms, this is
the amount of order lines processed by the system from the start of the
wave planning process until the selection documents have been created.
This includes all system processes needed to allocate inventory to the
customer orders, determine batch picking opportunities, create the most
efficient picking assignments for the orders included in the wave, and
create the pick documents needed for an associate to select the orders.
Print time of selection documents is not included in the benchmark
numbers, due to the variances in print speed technology.
Additionally, EXE performed identical benchmarking on a "quiet"
environment, with no user activity other than the benchmark wave
planning process, and on a simulated "stressed" environment, with other
users and processes competing with the benchmark wave planning process.
WAVE PLANNING ORDER MIX
Performance tests of the wave planning process for the Exceed 2000 WMS
were conducted using a standard order mix consisting of 500 customer
orders, with an average of 115 order lines per order. Each benchmarking
wave run consisted of restoring the database, running the wave for all
500 customer orders, and documenting the results. In this way, each run
was done against the same orders and inventory position, ensuring the
appropriate comparisons.
HARDWARE PLATFORM
Performance tests of the wave planning process for the Exceed 2000 WMS
were conducted at the IBM Solutions Partnerships Center in San Mateo,
CA.
2
37
IBM hardware used to conduct the performance testing consisted of an
IBM RS/6000 S80 with 4 GBs of RAM with 12 450MHz processors.
SYSTEM COMPONENTS
Number of processors 12 configured down from 24
Processor Type RISC 6000 450MHz
Total RAM in Megabytes 4096
Number of Disk Drives 16
Number of Disk Controllers 4
OS Release Level AIX 4.3.3
Database Informix 7.3.1uc2
EXceed 2000 V4.6 SR2
Note: All tests were run with 4096 MB of memory.
DISK CONFIGURATION
FOUR OF THE SSA ADAPTERS WERE CONFIGURED WITH FAST WRITE,
TOTALING 16 DISKS.
SSAO with 4 x 9.1 GB drives
SSA2 with 4 x 9.1 GB drives
SSA3 with 4 x 9.1 GB drives
SSA4 with 4 x 9.1 GB drives
Utilized LVM mirroring placing the mirrors on separate
adapters. System was spread across 8 separate disks.
"QUIET" VERSUS "STRESSED"
"Quiet" benchmark performance tests consisted of running the wave
planning process, only. No other system activity was allowed.
"Stressed" benchmark performance tests consisted of using a load
simulation tool to simulate users in an operational environment,
competing for system resources with the benchmark wave planning
process. The tool used was Rational's PurePerformix/TTY character based
load simulation tool. The simulation was driven from an IBM F40.
3
38
The following application processes were exercised during the S80112way
Stress tests:
Full Screen Receiving 10 receivers.
System Directed Put Away 35 forklift drivers.
Replenishment 40 forklift drivers.
Reports 2 operators processing enough
reports to keep the print queues busy.
Inventory Reduction 1 operator running the benchmark
wave planning process.
BENCHMARK RESULTS
Benchmark performance tests of the wave planning process for the Exceed
2000 WMS were as follows:
------------------------------------------------------------------------------------------------
"QUIET" SYSTEM "STRESSED" SYSTEM
ORDER LINES PER MINUTE ORDER LINES PER MINUTE
------------------------------------------------------------------------------------------------
IBM S80/12 Way Processor
6194 6161
(as previously defined)
------------------------------------------------------------------------------------------------
These results are very impressive. "Quiet" system throughput has
increased between 300 and 400 percent over the last documented
benchmarks, mainly due to increases in hardware capabilities with the
IBM S80 platform and performance improvements with Informix 7.3.1uc2.
Additionally, almost no loss in benchmark performance was documented
when stressing the environment with additional users and processes.
4