TURNKEY AGREEMENT

ADOBE SYSTEMS INTERNATIONAL LIMITED PARTNERSHIP having a Cayman Islands Registered Number 11653 c/o Ernst & Young Corporate Centre, ▇▇▇▇▇ ▇▇▇, ▇.▇. ▇▇▇ ▇▇▇▇, ▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇▇

and

▇▇▇▇▇ EUROPE LIMITED, a company
incorporated under the Companies Acts and having
a place of business at ▇▇▇▇▇▇ ▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇,
▇▇▇▇▇▇▇▇▇▇▇▇, ▇▇▇ ▇▇▇ (hereinafter called "▇▇▇▇▇")

WHEREAS

(A)
Adobe owns or licenses certain Software Products and related Documentation (all as after defined).

(B)
▇▇▇▇▇ desires to obtain the right to serve as one of Adobe's turnkey suppliers of Software Products as requested by Adobe on the terms and conditions contained herein.

1.
DEFINITIONS

As used in this Agreement, the following terms shall have the following respective meanings unless the context otherwise requires:

1.1
"Adobe" shall refer to Adobe Systems International Limited Partnership and any member of the Company Group.

1.2
"Adobe Designated Destination" shall mean any location to which Adobe instructs ▇▇▇▇▇ to ship Adobe Product Packages.

1.3
"Adobe Product Package" shall mean the Software, Documentation, end user agreements, packaging materials and any related materials identified by Adobe in the Master Production Schedule and ▇▇▇▇ of Materials for one or more products ("Adobe Product
Packages"). The Adobe Product Packages may be removed, changed, or added to by Adobe, in its sole discretion. A detailed description of what is included in each Adobe Product Package will be supplied by Adobe to ▇▇▇▇▇ in accordance with Clause
4.3.

1.4
"Adobe Product Release" shall mean a version of the product generally released to the public with a version number such as 6.x until it is replaced by a new Adobe Product Release. A new Adobe Product Release would be a change in version from version
6.0 to 6.5 or 6.0 to 7.0 but would not be a change in version from 6.0 to 6.0.7.

1.5
"▇▇▇▇ of Materials" shall mean a list, a sample of which is attached hereto as Part 1 of the Schedule, that describes the type and quantity of Components needed to build a particular version of an Adobe Product Package.

1.6
"Company Group" means Adobe Systems Incorporated, a Delaware corporation having a place of business at ▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇, ▇▇▇ and its subsidiaries and affiliates.

1.7
"Components" shall mean components to be used by ▇▇▇▇▇ or any Submanufacturers (as after defined) to produce Finished Goods in accordance with the Print Authorization form and Master Production Schedule.

1.8
"Confidential Information" shall mean any and all of Adobe's technical and non-technical information including patent, copyright, trade secret, and proprietary information, techniques, sketches, drawings, models, inventions, know-how, processes,
apparatus, equipment, algorithms, software programs, software source documents and formulae related to the current, future and proposed products and services referred to in this Agreement and includes, without limitation, Adobe's information
concerning research, experimental work, development, design details and specifications, engineering, financial information, procurement requirements, purchasing, manufacturing, customer lists, business forecasts, sales and merchandising, marketing
plans and all information disclosed by Adobe to ▇▇▇▇▇.

1.9
"Documentation" shall mean Adobe's published materials used with Adobe Product Packages.

1.10
"Effective Date" shall mean 4 December 1999.

1.11
"Finished Goods" shall mean Adobe Product Packages completed by ▇▇▇▇▇ or Submanufacturer (as after defined) in accordance with the Master Production Schedule.

1.12
"Fiscal Month" shall mean the months described in the schedule provided by Adobe to ▇▇▇▇▇ as part of the Master Production Schedule.

1.13
"Inventory" shall mean (i) the Adobe Product Packages which have been completed by ▇▇▇▇▇, (ii) all of ▇▇▇▇▇' work in progress with respect to the Adobe Product Packages, (iii) all materials or Components for Adobe Product Packages
which have been ordered by Adobe and received by ▇▇▇▇▇ or are on order by ▇▇▇▇▇ with its Submanufacturers (as after defined) (to the extent such materials or Components are non-cancelable or if cancelable, are not subject to any cancellation charges)
only to the extent such items (i), (ii) and (iii) are required to fulfill up to one hundred percent (100%) of the completed Adobe Product Packages referenced in Adobe's Purchase Orders or Master Production Schedule which remain unshipped to
Adobe.

1.14
"IP Rights" shall mean all of Adobe's and Adobe's suppliers' intellectual property rights, similar and/or neighbouring rights and sui generis rights, inter alia, database protection of whatever nature anywhere in the world and all rights pertaining
thereto including but not limited to all present and future title to and/or interests therein whether recorded or registered in any manner or otherwise, including, without prejudice to the foregoing generality, the Trade Marks and other trade marks
and service marks and applications therefor, patents and patent applications, copyright, database rights, designs, design rights both registered and unregistered, design right applications, trade secrets, know-how, information, production methods,
data, source codes, and object codes, discoveries, specifications, diagrams, technology, research, methods of formulation, results of tests and field trials, specifications of materials, composites of materials, formulae and processes;

1.15
"Master Media" shall mean the original reproducible media to be used by ▇▇▇▇▇ to reproduce the contents of each Adobe Product Package, including, but not limited to, CD, disk, film and paper.

1.16
"Master Production Schedule" shall mean a two monthly schedule a sample of which is attached hereto as Part 2 of the Schedule given by Adobe to ▇▇▇▇▇ which may include inter alia: an estimate of the materials projected by Adobe to be needed
by ▇▇▇▇▇ for the manufacture of one or more Adobe Product Packages; a forecast of Finished Goods required by Adobe to be provided by ▇▇▇▇▇; and details of any goods given to ▇▇▇▇▇ by Adobe to be worked upon by ▇▇▇▇▇ in accordance with Adobe's
instructions.

1.17
"Print Authorisation form" shall mean an electronic document from Adobe to ▇▇▇▇▇, a sample of which is attached hereto as Part 3A of the Schedule, describing Components to be purchased by ▇▇▇▇▇.

1.18
"Purchase Order" is an electronic document from Adobe to ▇▇▇▇▇, a sample of which is attached hereto as Part 3B of the Schedule describing the quantity, sku number, price, and terms for which Adobe is offering to purchase Finished Goods items
which are to be manufactured by ▇▇▇▇▇ or Submanufacturers (as after defined) in accordance with the Master Production Schedule.

1.19
"Schedule" means the Schedule in 9 parts attached hereto which shall be deemed to form part of this Agreement.

1.20
"Software" shall mean the copy(ies) of the Software Products in object code.

1.21
"Software Products" shall mean the copy(ies) of the Software and the Documentation for the Adobe Products Packages which are supplied to Adobe by ▇▇▇▇▇ pursuant to this Agreement. For the avoidance of doubt, all categories of Adobe software set out
in either the Master Production Schedule or the Purchase Order are deemed to be Software Products.

1.22
"Special Printing Aids" shall mean printed materials including: Silkscreens for CD's, t-shirts and other marketing items; steel dies for embossing and engraving; cutting dies for packaging and stickers; lithographic plates for the printing presses;
films; files and artwork.

1.23
"Specifications" shall mean the detailed specification provided by Adobe to ▇▇▇▇▇ setting out details of the Components that are to be used by ▇▇▇▇▇ in fulfillment of its obligations in terms of this Agreement a sample of which is attached hereto as
Part 4 of the Schedule.

1.24
"Statement of Work" shall mean the statement of work provided to ▇▇▇▇▇ by Adobe which describes the services to be provided by ▇▇▇▇▇ to Adobe in terms of this Agreement and which is attached as Part 9 to the Schedule.

1.25
"Trademarks" shall mean the trademarks used by Adobe and its suppliers to identify the Adobe Product Packages.

2.
AUTHORIZATION OF MANUFACTURER

2.1
Reproduction

Subject to the terms and conditions of this Agreement, Adobe authorizes ▇▇▇▇▇, on a non-exclusive basis, to use the Master Media to reproduce and assemble the Adobe Product Packages for distribution exclusively to Adobe for shipment only to Adobe
Designated Destinations, and ▇▇▇▇▇ accepts such appointment.

2.2
Adobe Product Package Designs

▇▇▇▇▇ shall be entitled to reproduce, with no alteration, Adobe's designs and contents for the Adobe Product Packages and shall comply in all respects with the Specifications, unless Adobe has given ▇▇▇▇▇ prior written approval for changes requested
by ▇▇▇▇▇. In the event ▇▇▇▇▇ wishes to alter any Component of any Adobe Product Package, it will submit samples of such Components, as altered, to Adobe at least thirty (30) days prior to volume production of such altered Adobe Product Packages
by ▇▇▇▇▇. Upon receipt of any altered Components, Adobe will promptly approve or reject such alterations in writing. Under no circumstances will ▇▇▇▇▇ commence volume production of any altered Adobe Product Package or distribute any such Adobe
Product Package without Adobe's prior written approval.

2.3
Ownership of Adobe Product Packages

Adobe retains sole ownership of the Documentation, Master Media, Inventory, IP Rights, Confidential Information, and related materials, including but not limited to those used by ▇▇▇▇▇ to produce the Adobe Product Packages, as well as to all Adobe
Product Packages produced by ▇▇▇▇▇ under this Agreement. ▇▇▇▇▇ agrees to take all steps necessary to ensure that all right, title and interest to the foregoing at all times remains with Adobe. To that end, when deemed necessary, in Adobe's sole
discretion, ▇▇▇▇▇ shall execute all documents necessary to carry out the foregoing including, but not limited to, assignation of any rights ▇▇▇▇▇ may have therein.

2.4
Independent Contractor

The parties agree that no joint venture, partnership, employment or agency relationship shall be deemed to have been created by this Agreement and neither of the parties shall be entitled to bind the other by contract or otherwise.

2.5
Use of Third Parties

2.5.1
Adobe will specify which suppliers ▇▇▇▇▇ may use to subcontract the production or supply of Components, for CD replication and for duplication of disks for the Adobe Product Packages. Without limiting the foregoing generality, Adobe shall only
authorise CD replicators who have entered into a CD replication agreement with Adobe on terms acceptable to Adobe. ▇▇▇▇▇ may recommend certain submanufacturers for said Components, for CD replication and for duplicated disks ("Submanufacturer(s)') to
Adobe, but ▇▇▇▇▇ agrees not to use Submanufacturers unless first approved in writing by Adobe, and Adobe may withdraw such approval at any time during the Term.

2.5.2
▇▇▇▇▇ represents and warrants to Adobe that any Submanufacturers ▇▇▇▇▇ may use to fulfill its obligations under this Agreement will perform as ▇▇▇▇▇ is required to perform pursuant to this Agreement, and further that Adobe's consent to ▇▇▇▇▇' use of
any Submanufacturers shall not be deemed a waiver of any Adobe rights hereunder nor relieve ▇▇▇▇▇ of any of its obligations pursuant to this Agreement.

2.5.3
Adobe will (in accordance with this Clause 2.5) approve successive Submanufacturers if any of the Submanufacturers become incapable, in Adobe's sole discretion, of timely delivery of quality Components or Adobe Product Packages or Adobe
withdraws its approval of any Submanufacturers in terms of Clause 2.5.1 hereof.

2.5.4
Prior to any Submanufacturer carrying out work for ▇▇▇▇▇ in terms of this Agreement, ▇▇▇▇▇ undertakes that it shall comply with the following provisions:

2.5.4.1
in the case of disk duplication, ▇▇▇▇▇ agrees to enter into a written agreement with such Submanufacturer on minimum terms and conditions no less restrictive than those set forth in Part 6 of the Schedule ("Minimum Terms and Conditions")
together with inventory procedures and security procedures no less restrictive than those set out in the Statement of Work;

2.5.4.2
in the case of all other Submanufacturers, ▇▇▇▇▇ agrees to enter into a written agreement with such Submanufacturer on terms no less onerous than those set out in this Agreement. Without prejudice to the foregoing generality the terms and conditions
set out in Clauses 2.5, 2.6, 5, 6, 8 (other than 8.3), 9 and 10 of this Agreement together with all provisions in relation to inventory control and anti-piracy set out in the Statement of Work must be reflected in all agreements entered into
between ▇▇▇▇▇ and Submanufacturers.

2.5.5
Notwithstanding the foregoing terms of this Clause 2.5, ▇▇▇▇▇ shall remain fully responsible and accountable to Adobe for all acts and omissions of Submanufacturers as if such acts and omissions were acts and omissions of ▇▇▇▇▇
itself.

2.5.6
Without prejudice to the foregoing terms of this Clause 2.5, ▇▇▇▇▇ shall be responsible for ensuring that Submanufacturers have security procedures which meet the highest industry standards and ▇▇▇▇▇ shall be responsible for reviewing and
monitoring all such security arrangements as long as such Submanufacturers are under contract to ▇▇▇▇▇.

2.5.7
▇▇▇▇▇ shall ensure that, as part of its arrangement with any Submanufacturers it has the right to regular audits and inspections and that it exercises such rights in accordance with Clause 6.1 of this Agreement.

2.6
No Right to Copy

▇▇▇▇▇ agrees that it will not make or have made, or permit to be made, any copies of Documentation, Master Media, Inventory, IP Rights, Confidential Information, and related materials or any portions thereof, except as necessary for the reproduction
of the Adobe Product Packages n accordance with the terms of this Agreement and will disclose Confidential Information only as permitted in Clause 9. ▇▇▇▇▇ will not decode or reverse engineer the Software included in the Adobe Product Packages
in whole or in part. Further, to assure compliance with the foregoing, ▇▇▇▇▇ shall take all security measures reasonably necessary to comply with this Agreement, including but not limited to the minimum security provisions set forth in the Statement
of Work.

2.7
No Other Rights

Except as otherwise expressly stated, this Agreement does not ▇▇▇▇▇ ▇▇▇▇▇ any rights, nor shall any rights be accrued through ▇▇▇▇▇' use under this Agreement, to Documentation, Master Media, Inventory, IP Rights, Confidential Information, and related
materials.

2.8
Adobe Special Printing Aids or Equipment

2.8.1
▇▇▇▇▇ acknowledges and agrees that Adobe owns all right, title and interest in (a) any Special Printing Aids paid for or supplied by Adobe for the manufacture of the Adobe Product Packages (including any confusingly similar designs), including,
without limitation all patent, design right, copyright, trade secret, trademark and any other intellectual property rights therein; and (b) any Special Printing Aids, tooling, and equipment paid for or supplied by Adobe specially for the
manufacture of the Adobe Product Packages. ▇▇▇▇▇ shall not use the foregoing items for any purpose except to manufacture the Adobe Product Packages for Adobe, and ▇▇▇▇▇ shall not sell any products using such Special Printing Aids, equipment or
tooling to any other party without the written consent of Adobe. Upon termination of this Agreement, Adobe shall have the right to take possession of the Special Printing Aids, equipment or tooling and ▇▇▇▇▇ shall, within thirty (30) days of
termination, at the sole option of Adobe, either: (i) destroy such items, including all related documentation or (ii) deliver such items, including all related documentation, to Adobe or such other person as Adobe may designate.

2.8.2
If ▇▇▇▇▇ creates any Special Printing Aids, equipment or tooling during the Term which are used specifically in relation to the work undertaken by ▇▇▇▇▇ for Adobe in terms of this Agreement, ▇▇▇▇▇ undertakes, as soon as is reasonably practicable to
provide Adobe with full details of said Special Printing Aids, equipment or tooling and Adobe shall have a period of 14 days to request ▇▇▇▇▇ to assign all rights that it has, including intellectual property rights, in and to said Special
Printing Aids, equipment or tooling to Adobe. Following said request from Adobe, ▇▇▇▇▇ shall have a period of 14 days to assign said rights to Adobe without charge.

2.9
Control of Changes

When Adobe requires any changes to be made to the quality standards, Statement of Work, Specifications, or ▇▇▇▇ of Materials, it shall provide ▇▇▇▇▇ with reasonable written notice of any changes that are required, and the parties hereto will discuss
and document in writing any necessary changes that are required. ▇▇▇▇▇ agrees that it will comply with all reasonable requests for changes or modifications made by Adobe during the Term. The parties hereto acknowledge that what may be reasonable in
terms of this Clause 2.9 shall depend upon the particular change being made by Adobe and the reason that such change is to be made.

3.
MASTER PRODUCTION SCHEDULE, PURCHASE ORDERS AND PRINT AUTHORISATION FORMS

3.1
Projections

Adobe shall provide ▇▇▇▇▇ with yearly and quarterly volume projections to be used solely for the purpose of ▇▇▇▇▇' capacity and resource planning. Notwithstanding the foregoing, said projections shall not be binding on Adobe.

3.2
Master Production Schedule

3.2.1.1
Adobe shall provide ▇▇▇▇▇ with rolling two monthly Master Production Schedules for make to stock pieces to be used by ▇▇▇▇▇ to plan for, build or procure Components and materials, time phased pursuant to each Component's described lead
time.

3.2.1.2
▇▇▇▇▇ shall use its best efforts to operate in a "just in time" environment to fulfill Adobe's Master Production Schedule while minimizing Component inventory rush.

3.2.1.3
▇▇▇▇▇ shall respond to Adobe's Master Production Schedule with projected weekly build quantities which will fulfill the Master Production Schedule volume and timing requirements.

3.2.1.4
In the event ▇▇▇▇▇ anticipates it will be unable to meet any Master Production Schedule provided by Adobe, ▇▇▇▇▇ shall, within a period of 24 (twenty four) hours of being provided with a Master Production Schedule by Adobe, detail in a written report
the reasons for its inability to meet the Master Production Schedule and shall propose a recovery plan for discussion with Adobe.

3.2.1.5
If ▇▇▇▇▇ does not, within a period of 24 (twenty four) hours of being provided with a Master Production Schedule by Adobe, provide Adobe with a written report setting out in detail the reasons for its inability to meet the Master Production Schedule
and a proposal for a recovery plan, then ▇▇▇▇▇ shall be deemed to have accepted the terms of the Master Production Schedule and shall be bound to comply with its terms in their entirety.

3.2.2
In addition to the provision by Adobe to ▇▇▇▇▇ of the Master Production Schedule, Adobe and ▇▇▇▇▇ shall review the terms of the Master Production Schedule on a weekly basis and any alterations to the Master Production Schedule shall be set out in
writing. Following on any such alteration ▇▇▇▇▇ shall be obliged to follow the Master Production Schedule as amended.

3.2.3
In addition to the other terms of this Clause 3.2, Adobe shall provide ▇▇▇▇▇ with a daily spreadsheet setting out on a daily basis the details of the back order of the build to order pieces and ▇▇▇▇▇ shall be obliged to follow the terms of such
daily spreadsheets in fulfillment of its obligations under this Agreement.

3.2.4
On a monthly basis during the Term, Adobe shall provide ▇▇▇▇▇ with details of units which were assembled on a build to order basis in the immediately preceding 30 (thirty) day period.

3.2.5
During the Term ▇▇▇▇▇ shall use all reasonable endeavours to accommodate production for Adobe in accordance with this Clause 3.2 and to accommodate any additional requests made by Adobe during the Term.

3.3
Purchase Orders and Print Authorisation forms

3.3.1
On a regular basis, once Adobe's Master Production Schedule has been run through ▇▇▇▇▇' MRP program, Adobe will provide ▇▇▇▇▇ with an electronic Print Authorisation form setting out Components that ▇▇▇▇▇ requires to purchase to achieve weekly build
quantities of Adobe Product Packages in accordance with the Master Production Schedule as may be amended in accordance with Clause 3.2. ▇▇▇▇▇ shall use best efforts to purchase 100% of the Print Authorisation form quantities in the week
specified. ▇▇▇▇▇ shall respond to Adobe's Print Authorisation form with an electronic Print Authorisation confirmation statement (including quantity and ship date) and actual ship date confirmation statement (which shall include the packing list)
upon shipment of the ordered Adobe Product Packages. Adobe and ▇▇▇▇▇ will mutually agree as to specific timing for release of and confirmation of a Print Authorisation form to achieve the production goal described above.

3.3.2
For Finished Goods, ▇▇▇▇▇ shall be required to accept Purchase Orders, Purchase Order changes and shipping orders and to provide Purchase Order confirmation details, Purchase Order shipping notification, Purchase Order receipts, shipping order
confirmations and invoices using electronic communication either through EDI or a web based tool as determined by Adobe.

3.3.3
▇▇▇▇▇ shall conform to the terms and conditions attached to the Print Authorisation form and to the Purchase Order which are deemed to form part of the Print Authorisation form or the Purchase Order (as the case may be) unless said terms and
conditions are at variance with the terms and conditions of this Agreement in which case the terms and conditions of this Agreement shall prevail.

3.4
Miscellaneous Order Information

3.4.1
▇▇▇▇▇ shall (or shall procure that Submanufacturers shall) assemble the Components described in the Print Authorisation form pursuant to the Specifications. ▇▇▇▇▇ shall invoice Adobe for assembled Adobe Product Packages as provided in Clause 6.3
("Invoices").

3.4.2
▇▇▇▇▇ shall provide such production reports as are reasonably required by Adobe, formats of which are set out in the Statement of Work.

3.5
Title and Risk

3.5.1
Notwithstanding any provision to the contrary within this Agreement:

3.5.1.1
Title to all Finished Goods shall pass to Adobe as soon as said Finished Goods are completed by ▇▇▇▇▇ or any Submanufacturers;

3.5.1.2
Title to all Components shall pass to Adobe as soon as said Components are delivered to ▇▇▇▇▇' facilities or any Submanufacturer's facilities as appropriate;

3.5.2
For the avoidance of doubt the provisions of Clause 3.5.1 shall apply whether or not any Finished Goods or Components are in the possession of ▇▇▇▇▇ or any Submanufacturers.

3.5.3
▇▇▇▇▇ undertakes to ensure that all Finished Goods, Components and any other part of the Inventory are marked clearly as being the property of Adobe and are not intermingled with any property of ▇▇▇▇▇ or any property belonging to any third parties
including suppliers or Submanufacturers.

3.5.4
Risk of loss or damage in relation to Components and all work in progress shall be with ▇▇▇▇▇.

3.5.5
Risk of loss or damage in relation to Finished Goods shall be with Adobe.

4.
MEDIA REPLICATION

4.1
Materials

4.1.1
Adobe will provide ▇▇▇▇▇ or Submanufacturers, at Adobe's sole option, with one (1) copy of the Master Media included in each Adobe Product Package as necessary for ▇▇▇▇▇ to fulfill its obligations under this Agreement. Upon receipt of the Master
Media for an Adobe Product Package, ▇▇▇▇▇ or any Submanufacturers shall test the Master Media for viruses and faults. ▇▇▇▇▇ or any Submanufacturers will not commence quantity reproduction of the Master Media until ▇▇▇▇▇ or any Submanufacturers have
tested the Master Media and taken reasonable care to ensure that the Master Media is free from defects or viruses. ▇▇▇▇▇ agrees to store (or to procure where appropriate that any Submanufacturers store) the Master Media in a locked, secure, separate
location for production and archival purposes. ▇▇▇▇▇ agrees to produce the Software for Adobe Product Packages only from the Master Media supplied to ▇▇▇▇▇ by Adobe and only in quantities due in terms of the Master Production Schedule.

4.1.2
When any viruses or faults are discovered by ▇▇▇▇▇ or Submanufacturers in accordance with Clause 4.1.1 hereof, ▇▇▇▇▇ undertakes to immediately notify Adobe that a virus or fault has been found and will await further
instruction from Adobe as to how to proceed.

4.2
Acceptance

The Master Media, other Adobe-reproduced media and other materials shipped by Adobe to ▇▇▇▇▇ will be deemed to have been accepted by ▇▇▇▇▇ unless ▇▇▇▇▇ delivers a notice to Adobe specifying the nature of any material defect or quantity discrepancies
within two (2) business days from the delivery of such material (a business day for the purposes of this Clause 4.2 shall mean a day on which the Scottish Clearing Banks are open for business).

4.3
Specification

Adobe will provide ▇▇▇▇▇ with documentation along with updates and revisions, and other materials relating to the reproduction and assembly of the Adobe Product Packages such as Adobe authorised suppliers, ▇▇▇▇ of Materials and Specifications, and
▇▇▇▇▇ shall be obliged to Comply with the terms of said documentation including any updates and revisions given to ▇▇▇▇▇ by Adobe.

5.
INVENTORY

5.1
Inventory Control

▇▇▇▇▇ agrees to comply with all the procedures set forth in the Statement of Work in relation to inventory control.

5.2
Excess Inventory

5.2.1
Adobe shall provide ▇▇▇▇▇ with a monthly report setting out End of Life (EOL) and obsolescence designations for: (i) Components used by ▇▇▇▇▇ or any Submanufacturers to construct Finished Goods in terms of this Agreement and/or; (ii)
Finished Goods themselves. An EOL Designation shall mean that a particular Component or Finished Good shall become obsolete within a period of 6 months.

5.2.2
Adobe shall provide ▇▇▇▇▇ with as much notice as possible of particular Components or Finished Goods having an EOL Designation and ▇▇▇▇▇ shall be under an obligation to amend its work practices in terms of this Agreement accordingly.

5.3
Obsolete Inventory

Any part of the Inventory which is deemed to be obsolete by Adobe in accordance with this Clause 5 shall either be delivered to Adobe or destroyed by ▇▇▇▇▇ (at the sole discretion and cost of Adobe). Notwithstanding the foregoing, ▇▇▇▇▇ shall be
responsible for the cost of such delivery or destruction where there is obsolete inventory due to the overmanufacture of Components or Finished Goods by ▇▇▇▇▇ or any Submanufacturers (by way of illustration only this shall include where an EOL
Designation had been given to ▇▇▇▇▇ by Adobe in accordance with this Clause 5 and ▇▇▇▇▇ had not amended its work practices in compliance with Clause 5.2.2.).

6.
OBLIGATIONS OF ▇▇▇▇▇

6.1
Manufacturing

▇▇▇▇▇ and any Submanufacturers will manufacture the Adobe Product Packages in accordance with the most recent versions of Adobe's quality standards, Statement of Work, Specifications and any other instructions given by Adobe to ▇▇▇▇▇ prior to
commencement of manufacture pursuant to the Master Production Schedule. ▇▇▇▇▇ will provide Adobe reasonable access to ▇▇▇▇▇ and Submanufacturers facilities to inspect the Adobe Product Packages, Inventory and their manufacture and undertakes to
ensure (without prejudice to Clause 13 hereof) that Adobe has this right of access in terms of written agreements entered into between ▇▇▇▇▇ and Submanufacturers. Notwithstanding the foregoing, ▇▇▇▇▇ undertakes, at the request of Adobe, to
inspect Submanufacturers facilities at regular intervals on behalf of Adobe and to deliver a report to Adobe within [*] of said inspection taking place confirming that any Submanufacturers so inspected are manufacturing the Adobe Product Packages in
accordance with Adobe's quality standards (including without prejudice to the foregoing the manufacturing standard set out in Clause 6.2 hereof), Statement of Work, Specifications and any other instructions given by Adobe to ▇▇▇▇▇.

6.2
Delivery to Adobe Designated Destinations; Acceptance

▇▇▇▇▇ will ship the Adobe Product Packages to Adobe Designated Destinations according to the delivery schedule set forth by Adobe pursuant to Clause 3 (Master Production Schedule, Purchase Orders and Print Authorisation forms). Ail Adobe Product
Packages shall be packed in accordance with any instructions given by Adobe and good standards of care. ▇▇▇▇▇ will conduct product inspections in accordance with the guidelines set forth in Adobe SOP 11-007, Product Inspection Requirements for
Turnkey Suppliers (a copy of which is attached as Part 8 of the Schedule) to ensure all Finished Goods shipped to Adobe Designated Destinations conform to specification and are free from defects in materials and workmanship. Adobe shall be
entitled to reject any Adobe Product Package after delivery if it is found to be defective in materials or workmanship. Adobe Product Packages rejected by Adobe shall be returned to ▇▇▇▇▇ to be reworked or replaced by ▇▇▇▇▇ and reshipped to Adobe
freight prepaid within a period of 3 days of being so returned by Adobe.

6.3
Invoices

▇▇▇▇▇' invoices shall be submitted using electronic communication either through EDI or a web based tool as determined by Adobe and shall contain the following information: Adobe Purchase Order number, Purchase Order line item, product name,
description of product, quantities, unit prices, extended totals, invoice number and date, remit to address, SKU, item number and any other information mutually agreed to by the parties. Bills of lading, express receipts, or other proof of delivery
shall be furnished upon Adobe's request. All invoices must identify the Adobe Purchase Order or they will not be paid. ▇▇▇▇▇ will invoice Adobe no earlier than the delivery date to Adobe.

6.4
Financial Statements

In the event that ▇▇▇▇▇ is not a publicly traded company, upon Adobe's request, ▇▇▇▇▇ will deliver to Adobe profit and loss statements and balance sheets for ▇▇▇▇▇, for the immediately preceding fiscal quarter of ▇▇▇▇▇, prepared by ▇▇▇▇▇' Chief
Financial Officer. Such information will be treated as confidential by Adobe and disclosed only to Adobe full-time employees on a need-to know basis.

* CONFIDENTIAL TREATMENT REQUESTED

6.5
Records and Reports

▇▇▇▇▇ will maintain records of all Documentation, Master Media, Inventory, IP Rights, Confidential Information, and all related materials relating to the Adobe Product Packages. ▇▇▇▇▇ will, at Adobe's request either (i) send Adobe copies of all
such records or (ii) allow Adobe access to its facilities to inspect such records.

6.6
Account Management

▇▇▇▇▇ agrees to assign a team to manage Adobe's account as approved by Adobe. The ▇▇▇▇▇' Adobe Account Manager will be available to meet with Adobe personnel during normal business hours (for the purposes of this Clause 6.6 normal business hours
shall mean Monday to Friday 8am to 5pm or, in emergency, such other hours as are necessary at Adobe's discretion) to review schedules, attend new product planning meetings, and address other issues of concern. The Account Manager and team shall
participate with Adobe's manufacturing team in joint operations committee meetings which will convene as often as is required by Adobe (via teleconference or in person) to address and resolve all operational, quality, scheduling, supplier and
capacity issues as can be expected to arise in the normal course of business. In the event that Adobe is dissatisfied with the Adobe Account Manager for any valid commercial reason, Adobe will ask ▇▇▇▇▇ to assign a new Account Manager who is mutually
agreeable to Adobe and ▇▇▇▇▇ and Skyes shall be obliged to assign an interim Account Manager to Adobe within a 7 day period and to assign a permanent replacement Account Manager within a 6 week period.

6.7
Capacity

6.7.1
▇▇▇▇▇ shall, either itself, or through Submanufacturers provide sufficient capacity to manufacture all quantities or volumes required by Adobe in terms of the Master Production Schedule as amended from time to time.

6.7.2
If the volumes required by Adobe in terms of the Master Production Schedule as amended from time to time require use by ▇▇▇▇▇ of overtime, weekends, holidays, additional Submanufacturers or additional facilities which result in additional cost to
▇▇▇▇▇, then ▇▇▇▇▇ shall provide Adobe with reasonable notice and an estimate of such additional cost and the parties hereto shall agree what additional cost shall be borne by Adobe prior to ▇▇▇▇▇ or Submanufacturers commencing
manufacturing.

6.8
Reporting Requirements

6.8.1
Without prejudice to Clause 6.2 hereof ▇▇▇▇▇ shall comply with the reporting requirements set out in the Statement of Work or as otherwise requested by Adobe.

6.8.2
Without prejudice to Clause 6.2 hereof, during the manufacturing process carried out by ▇▇▇▇▇ in terms of this Agreement ▇▇▇▇▇ shall supply Adobe with samples in accordance with the provisions set out in the Statement of Work.

6.9
Virus Checks

In addition to any other references to virus checks in this Agreement ▇▇▇▇▇ shall (or shall procure that Submanufacturers shall):

6.9.1
perform one ore more virus scans using the latest release of one or more commercially released virus scan software products on all disk Master Media immediately prior to duplicating;

6.9.2
perform media verification on a disk or diskettes as requested by Adobe, and generate a separate check sum for each diskette which is identical to the check sum that is supplied by Adobe;

6.9.3
perform a complete file server backup and virus scan using the latest release of one or more commercially released virus scan software products weekly on the replication/duplication network (being the replication network for the purposes of disks and
the duplication network for the purposes of CD's). Any backup media shall be stored in a fire safe. The network virus software shall continuously monitor all replication/duplication network (being the replication network for the purposes of disks and
the duplication network for the purposes of CD's) file activity as an added precaution and will automatically initiate a system shut down of workstation notification if any suspected virus is detected;

6.9.4
if a virus is found by ▇▇▇▇▇ (or Submanufacturers) in terms of this Clause 6.9, clean it from the hard drive or network if required, and notify Adobe immediately that a virus has been found. ▇▇▇▇▇ and any Submanufacturer shall wait for further
instruction from Adobe and verification to proceed;

6.9.5
not (and undertake to procure that Submanufacturers shall not) introduce viruses to CD's that are replicated in terms of this Agreement.

6.10
Millennium Compliance

6.10.1
▇▇▇▇▇ warrants that the performance, operation and functionality of: (i) all Components used by it in the performance of its obligations in terms of this Agreement and (ii) all Finished Goods supplied by it to Adobe in terms of this
Agreement shall: (A) not be affected in any manner or respect (whether by error, interruption or otherwise) by the inputting, processing or outputting of: (a) dates prior to, during and after the year 2000 or in any other respect after 31
December 1999 by virtue only of passing that date (b) dates during any leap year; and/or (c) the date 9th September and; (B) comply with the definition of Year 2000 conformity (and the rules stated in relation to that definition)
prepared by the British Standards Institution (document reference DISC PD- 2000 a copy of which is attached as Part 5 of the Schedule).

6.10.2
▇▇▇▇▇ undertakes to ensure that all Components and Finished Goods supplied to it by Submanufacturers or suppliers in terms of this Agreement comply with the definition of Year 2000 conformity (and the rules stated in relation to that definition)
prepared by the British Standards Institution (document reference DISC PD-2000).

6.11
Location of ▇▇▇▇▇

If ▇▇▇▇▇ intends to relocate all or any part of its business from Galashiels, Scotland, it shall give Adobe no less than [*] notice of its intention to so relocate and also details of where it intends to relocate to. Adobe expressly reserves the
right to terminate this Agreement by notice in the event that ▇▇▇▇▇ intends to relocate all or any part of its business from Galashiels, Scotland.

6.12
Business Continuity Plan

6.12.1
▇▇▇▇▇ undertakes that it shall, during the Term, comply with and follow its business continuity plan (the "BCP") in effect from time to time (a copy of the plan dated November 1998 has been exhibited to Adobe).

* CONFIDENTIAL TREATMENT REQUESTED

6.12.2
▇▇▇▇▇ undertakes that it shall, during the Term, continually review, update and improve the BCP and, that it shall not make any amendments to the BCP without the prior consent of Adobe.

7.
PAYMENTS AND TAXES

7.1
Payments

Provided ▇▇▇▇▇ is in compliance with the terms and conditions of this Agreement, Adobe shall pay ▇▇▇▇▇:

7.1.1
the amounts in respect of services to be performed and Finished Goods to be supplied by ▇▇▇▇▇ hereunder which have been accepted by Adobe in terms of a Purchase Order; and

7.1.2
the payment set out in Part 7 Section A of the Schedule.

7.2
For the avoidance of doubt, the parties hereto hereby acknowledge that no other payments of whatsoever nature other than the foregoing payments set out in this Clause 7.1 shall be payable by Adobe to ▇▇▇▇▇ in terms of this Agreement.

7.2.1
Invoices properly submitted by ▇▇▇▇▇ shall be payable net thirty (30) days from date of receipt by Adobe of ▇▇▇▇▇ invoice (in accordance with Clause 6.3 hereof in respect of payments made in terms of Clause 7.1.1).

7.2.2
If Adobe disputes any portion of any invoice given by ▇▇▇▇▇ to Adobe, then Adobe will pay the undisputed portion and shall promptly inform ▇▇▇▇▇ of the nature of the dispute. The parties will use their best efforts to resolve the dispute promptly in
accordance with the escalation procedures set out in the Statement of Work.

7.2.3
Payment of an invoice shall not constitute acceptance of products and will be subject to adjustment for errors, shortages, defects or other failure to meet the requirements of this Agreement.

7.2.4
Adobe may, in its own discretion, make payment to ▇▇▇▇▇ pursuant to this Agreement by electronic means and ▇▇▇▇▇ confirms that it shall accept said payment by such method.

7.3
VAT

In respect of all payments to be made by Adobe to ▇▇▇▇▇ in terms of this Agreement, ▇▇▇▇▇ shall be obliged to provide Adobe with a valid VAT invoice.

7.4
Most favourable payment terms

7.4.1
If at any time during the Term ▇▇▇▇▇ provides goods or services similar to the goods or services provided in terms of this Agreement to any third party on payment terms which are more favourable in respect of such goods or services than the payment
terms provided herein then the parties agree that the payment terms applying to provision of such goods or services hereunder shall, at the request of Adobe, be amended to provide for such favourable payment terms.

7.4.2
Notwithstanding the provisions of Clause 7.4.1 hereof, ▇▇▇▇▇ shall not be obliged to disclose the identity of any such third party.

7.4.3
▇▇▇▇▇ shall be bound to inform Adobe immediately if any such circumstances as set out in Clause 7.4.1 arise at any time during the Term.

7.5
Taxes and Duties

Except as otherwise provided in this Agreement, Adobe agrees to pay any sales, use, import or export, value added or similar tax or duty relating to Adobe Product Packages delivered pursuant to the terms of this Agreement, other than those based on
▇▇▇▇▇' net income (subject to full details of said taxes or duties being set out on invoices provided by ▇▇▇▇▇ to Adobe in terms of this Agreement). If a resale certificate or other certificate or document of exemption is required in order to exempt
Adobe Product Packages from any such liability, ▇▇▇▇▇ will promptly execute and furnish such document or certificate to Adobe.

8.
WARRANTY

8.1.1
Conformance to Specifications ▇▇▇▇▇ warrants that:

8.1.1.1
Adobe Product Packages and any Inventory sold to Adobe: (i) will be free and clear of all liens and encumbrances caused by ▇▇▇▇▇; (ii) will conform, in all respects, to the Specifications; and (iii) will be of satisfactory quality and
otherwise free from defects in materials and workmanship and;

8.1.1.2
no viruses shall be introduced to CD's that are replicated by ▇▇▇▇▇ or Submanufacturers in terms of this Agreement.

8.1.2
Without prejudice to Clause 13 hereof, Adobe will conduct periodic inspections at Adobe's, ▇▇▇▇▇' and Submanufacturers' facilities of Adobe Product Package lots, and notify ▇▇▇▇▇ in writing of failure to conform to Specifications. Each such
notice shall describe the lot virus or defect or the isolated virus or defect (collectively, a "Defect"), as the case may be, in reasonable detail.

8.1.3
If Adobe experiences field failures traceable to a defect severe enough at Adobe's discretion to warrant retraction of distributed Adobe Product Packages, ▇▇▇▇▇ shall provide immediate support to Adobe in taking corrective action including, if
appropriate, a recall program at ▇▇▇▇▇ expense to repair or replace all Adobe Product Packages which may be defective.

8.1.4
Without prejudice to Clause 8.1.3, if a Defect is caused by the accident, abuse, misuse, neglect, alteration or repair by ▇▇▇▇▇ or its Submanufacturers or suppliers then Adobe may return the Adobe Product Packages subject to such Defect to ▇▇▇▇▇
at ▇▇▇▇▇' expense, and ▇▇▇▇▇ will reimburse Adobe for such shipping costs provided that ▇▇▇▇▇ has consented to the shipping method and cost prior to the return of such Adobe Product Packages (such consent not to be unreasonably withheld) and ▇▇▇▇▇
shall either repair, replace, or credit Adobe for the price charged by ▇▇▇▇▇ to Adobe of such Adobe Product Packages (the option being in ▇▇▇▇▇' sole discretion).

8.2
Free from defects

In the event Adobe authorizes ▇▇▇▇▇ to reproduce CD's or disks from the Master Media, ▇▇▇▇▇ warrants that:

8.2.1
the reproduced media will be free from defects in materials and workmanship for a period of one (1) year from the date of its delivery to Adobe and;

8.2.2
the software portions of the Adobe Product Packages shall digitally match the Master Media.

8.3
Insurance

▇▇▇▇▇ shall obtain and maintain product liability, public liability and professional indemnity insurance policies each with caps of [*] Sterling or any statutory minimum in place from time to time, in respect of each of such policies with a reputable
insurance company in respect of ▇▇▇▇▇ liabilities hereunder both during subsistence of this Agreement and for a period of five years after its expiry or termination. For as long as such insurance is required as aforesaid, ▇▇▇▇▇ shall submit to Adobe
annually (on the anniversary of the Effective Date):—

a.
copies of all relevant insurance policies; and

b.
such evidence of payment of premiums (including payment receipts) as Adobe shall reasonably require in respect of such insurance to show that it has been obtained and renewed.

Without prejudice to the foregoing Adobe shall be entitled to require sight of such evidence of insurance.

9.
IP RIGHTS AND CONFIDENTIAL INFORMATION

9.1
Acknowledgment and Protection of IP Rights

▇▇▇▇▇ acknowledges that the Documentation, Master Media, Inventory, IP Rights, Confidential Information Documentation, Master Media, Inventory, IP Rights, Confidential Information, and related materials relating to the Adobe Product Packages only to
employees and consultants of ▇▇▇▇▇ or Submanufacturers approved by Adobe pursuant to Section 2.5 ("Use of Third Parties") with a need to know such information and who have signed confidentiality agreements or other written policies of ▇▇▇▇▇
which obligate them to take all reasonable precautions to prevent disclosure of such Confidential Information to other parties (said confidentiality agreements or written policies to be no less onerous than those set out in this Clause 9)
.

9.2
No Publicity

▇▇▇▇▇ shall not publicly disclose the existence of this Agreement nor disclose any terms of this Agreement, orders, forecasts or deliveries hereunder at any time, without the prior written consent of Adobe. Neither party shall disclose the terms of
this Agreement without the prior written consent of the other party, except (i) as may be required by law or (ii) such limited disclosure as may be reasonably necessary to either party's bankers, lawyers or accountants.

9.3
Confidentiality

▇▇▇▇▇ agrees that it will not reproduce, make use of, disseminate, or in any way disclose Confidential Information to any person, firm or business, except to the extent necessary for negotiations, discussions, and consultations with personnel or
authorised representatives of Adobe, and for the purpose of fulfilling the terms of this Agreement.

9.4
▇▇▇▇▇ agrees that it shall treat all Confidential Information with the same degree of care as it accords to its own confidential information and ▇▇▇▇▇ represents that it exercises reasonable care to protect its own confidential
information.

* CONFIDENTIAL TREATMENT REQUESTED

9.5
▇▇▇▇▇ agrees that it will not modify, reverse engineer, decompile, create other works from, or disassemble any software programme contained in the Confidential Information, Master Media or Adobe Product Packages.

9.6
▇▇▇▇▇ obligations in terms of 9.3, 9.4 and 9.5 and with respect to any portion of Confidential Information shall terminate when and if ▇▇▇▇▇ can document that (a) it was in the public domain at or subsequent to the time it was communicated to
▇▇▇▇▇ by Adobe through no fault of ▇▇▇▇▇ (b) it was rightfully in ▇▇▇▇▇' possession free of any obligation of confidence at or subsequent to the time it was communicated to ▇▇▇▇▇ by Adobe; (c) it was developed by employees or agents of
▇▇▇▇▇ independently of and without reference to any information communicated to ▇▇▇▇▇ by Adobe; or (d) the communication was in response to a valid order by a court or other governmental body, was otherwise required by law, or was necessary to
establish the rights of either party under this Agreement.

9.7
Adobe agrees to treat as confidential any information which is confidential and proprietary to ▇▇▇▇▇ and which is provided to Adobe during the term of the Agreement at Adobe's request, and to ensure that all appropriate precautions are in place to
ensure that all such information is treated as confidential by it, its officers and employees. Adobe's obligations in terms of this Clause 9.7 and with respect to any portion of such confidential information shall terminate when and if Adobe can
document that (a) it was in the public domain at or subsequent to the time it was communicated to Adobe by ▇▇▇▇▇ through no fault of Adobe; (b) it was rightfully in Adobe's possession free of any obligation of confidence at or subsequent to
the time it was communicated to Adobe by ▇▇▇▇▇; (c) it was developed by employees or agents of Adobe independently of and without reference to any information communicated to Adobe by ▇▇▇▇▇; or (d) the communication was in response to a
valid order by a court or other governmental body, was otherwise required by law, or was necessary to establish the rights of either party under this Agreement.

9.8
Neither party shall communicate any information to the other in violation of the proprietary rights of any third party.

10.
PROPRIETARY NOTICES & TRADEMARKS

10.1
Proprietary Notices

▇▇▇▇▇ agrees that each Adobe Product Package shall contain the same proprietary notices that appear on or in the Master Media and other materials delivered by Adobe to ▇▇▇▇▇, and any other notices required by Adobe to preserve Adobe's and its
suppliers' IP Rights.

10.2
Ownership of Marks

▇▇▇▇▇ acknowledges the validity of the Trademarks and their ownership by Adobe or its suppliers, agrees that it will do nothing inconsistent with such ownership and that all use of the Trademarks by ▇▇▇▇▇ shall inure to the benefit of and be on
behalf of Adobe and its suppliers. ▇▇▇▇▇ agrees that nothing in this Agreement shall give ▇▇▇▇▇ any right, title or interest in the Trademarks other than the right to use the Trademarks in accordance with this Agreement and ▇▇▇▇▇ agrees that it will
not challenge the title of Adobe or its suppliers to the Trademarks.

10.3
Infringement Proceedings

▇▇▇▇▇ agrees to notify Adobe of any unauthorized use of the Trademarks or any Component of the Adobe Product Packages by others promptly as such use comes to ▇▇▇▇▇' attention. Adobe shall have the sole right and discretion to bring infringement or
unfair competition proceedings involving for said unauthorized use. On request by Adobe, ▇▇▇▇▇ shall provide Adobe at the expense of Adobe, with such assistance as is required by Adobe (acting reasonably) in bringing said infringement or unfair
competition proceedings.

11.
PATENT, COPYRIGHT AND TRADEMARK INDEMNITY

11.1
Subject to the limitations set forth herein below, Adobe shall defend ▇▇▇▇▇ from all claims, suits or proceedings with respect to any claim that the Adobe Product Packages as designed by Adobe, infringe upon any European Union ("EU") member state
copyright, trade ▇▇▇▇ or patent; provided, however, that ▇▇▇▇▇, at its own expense (i) promptly notifies Adobe in writing of such claim, suit or proceeding (ii) gives Adobe the right to control and direct investigation, preparation, defense
and settlement of any claim, suit or proceeding; (iii) makes no admission of liability; and (iv) gives assistance and full co-operation for the defense of same and further provided that Adobe's liability with respect to portions of Adobe
Product Packages provided by or licensed from third parties will be limited to the extent Adobe is indemnified by such third parties. Adobe shall pay any resulting damages, costs and expenses finally awarded to a third party but Adobe is not liable
for such amounts, or for settlements incurred by ▇▇▇▇▇ without Adobe's written authorisation. If such claim, suit or proceeding has occurred or, in Adobe's opinion, is likely to occur, Adobe may, at its election and expense, either obtain for ▇▇▇▇▇
the right to continue manufacturing such allegedly infringing Adobe Product Packages, replace or modify the Adobe Product Packages so they are not infringing, or remove such Adobe Product Packages from this Agreement.

11.2
Limitations on Indemnity

The provisions of the foregoing indemnity shall not apply with respect to any instances of infringement based upon or arising out of use of any Adobe Product Package which has been modified by ▇▇▇▇▇ or any third party (except to the extent such
modifications are authorized and approved by Adobe). Notwithstanding any other provisions, the foregoing indemnity shall not apply with respect to any infringement based on ▇▇▇▇▇' activities occurring subsequent to its receipt of notice of any
claimed infringement unless Adobe shall have given ▇▇▇▇▇ written permission to continue to reproduce and assemble the allegedly infringing Adobe Product Package. This shall be Adobe's sole and exclusive obligation for breach of this
indemnity.

12.
FORCE MAJEURE

12.1
Neither party shall be liable by reason of any failure or delay in the performance of its obligations under this Agreement on account of strikes, riots, insurrection, fires, flood, storm, explosions, acts of God, war, governmental action, labour
conditions, earthquakes, material shortages or any other cause which is beyond the reasonable control of such party. If such events cause a failure or delay by ▇▇▇▇▇, then ▇▇▇▇▇ will notify Adobe of the causes of such failure or delay and the period
of performance will be extended by a period equal to the delay caused by such event.

12.2
Upon determination by Adobe that the event will impact ▇▇▇▇▇ print and/or production of Adobe product for a period to exceed [*], ▇▇▇▇▇ will immediately arrange to shift production to such other ▇▇▇▇▇ European or Ireland Customer Operations Centres
(if assembly impacted) or to other print suppliers (if print plant impacted), to bring Adobe production back to delivery schedule level as quickly as possible, and in no case longer than [*]. ▇▇▇▇▇ will participate with Adobe, at Adobe's discretion,
to recover print or production through other Adobe third party vendors as may be required to ensure restoration of Adobe revenue shipments. Upon resolution of any such event, ▇▇▇▇▇ will make every effort to allocate its print and/or production
capacity, without additional cost to Adobe, to meet required delivery schedules, and to restore print and/or production to the original plants. For the avoidance of doubt, if there is any conflict between this Clause 12 and the BCP, the
provisions of this Clause 12 shall prevail.

13.
RIGHT OF AUDIT

13.1
▇▇▇▇▇ shall (and shall procure that all Submanufacturers shall) permit Adobe and/or its nominated representatives to inspect ▇▇▇▇▇' and/or Submanufacturer's records pertaining to the services provided in terms of this Agreement (including, without
limitation to the foregoing, all financial records) and to enter any premises of ▇▇▇▇▇ or Submanufacturers at which the Adobe Product Packages are being manufactured and/or stored and to inspect the activities at such premises to ensure compliance by
▇▇▇▇▇ and/or Submanufacturers with all the terms of this Agreement including, without prejudice to the foregoing generality, the terms of Clauses 2.5, 2.6, 5, 6, 8, 9 and 10 of this Agreement. Where said premises are not owned or controlled by ▇▇▇▇▇,
▇▇▇▇▇ shall procure all necessary rights of entry to enable Adobe to exercise its right of inspection hereunder.

13.2
In the event that the inspection referred to in Clause 13.1 discloses a material failure of ▇▇▇▇▇ to comply with its obligations in terms of this Agreement, ▇▇▇▇▇ shall pay the costs of the inspection within thirty (30) days of Adobe's
demand.

13.3
Any inspection conducted pursuant to Clause 13.1 shall be conducted during regular business hours in such a manner as not to interfere with ▇▇▇▇▇' normal business activities. Any and all rights of Adobe set out in this Clause 13 shall be
without prejudice to Adobe's other rights and remedies at law and under this Agreement.

13.4
▇▇▇▇▇ shall inspect all relevant records of Submanufacturers in accordance with the terms of Clause 13.1 on behalf of Adobe and at the request of Adobe to ensure compliance with the terms of this Agreement, and shall report any breaches to Adobe
immediately at which point ▇▇▇▇▇ shall be obliged, at the request of Adobe, to cease using such Submanufacturers.

14.
TERM AND TERMINATION

14.1
Unless earlier terminated as provided herein or otherwise agreed in writing, the term of this Agreement shall begin on the Effective Date and shall continue in force for the duration of the Adobe Product Release for which ▇▇▇▇▇ is providing services
hereunder ("Term').

14.2
Termination Without Cause

Either party may terminate this Agreement without cause upon ninety (90) days' prior written notice to the other party subject always Clause 14.1 hereof and Adobe's right to terminate in accordance with Clause 6.11 hereof.

* CONFIDENTIAL TREATMENT REQUESTED

14.3
Default, Notice and Termination Without Cure

14.3.1
If ▇▇▇▇▇ materially defaults in the performance of any provision of this Agreement (a material default for the purposes of this Clause shall be deemed to include, without prejudice to the foregoing generality, breaches of Clauses 2.5, 2.6, 6.9 and 8
together with breaches of inventory control and anti-piracy provisions set out in the Statement of Work), Adobe may give written notice to ▇▇▇▇▇ that if the default is not cured within ten (10) days, the Agreement will be terminated and, upon
expiration of such period without cure, this Agreement shall be terminable by Adobe immediately on giving notice. For the avoidance of doubt, if a breach is incurable, Adobe shall have the right (in its sole discretion) to serve notice to terminate
on ▇▇▇▇▇ to take effect immediately.

14.3.2
Notwithstanding the terms of Clause 14.2.1, Adobe will set out in the Statement of Work an escalation procedure in relation to complaints and disputes which the parties hereto will adhere to during the Term.

14.4
Insolvency

This Agreement shall immediately and automatically terminate, without judicial intervention, if either party is declared bankrupt, files for moratorium on payments of its debts or seeks any other relief, or if either party shall go into liquidation
(other than for a member's voluntary liquidation for the purposes of reconstruction or amalgamation) or enter into a scheme or voluntary arrangement with its creditors or become subject to an administration order or have a Receiver appointed over any
of its property and assets or undergo any proceeding analogous to any of the foregoing events. Both parties shall use best efforts to notify the other party hereto immediately if one of the foregoing events occurs.

14.5
Rights Upon Termination

Upon the termination of this Agreement for any reason:

14.5.1
Discontinuation of Use and Return of Copies

▇▇▇▇▇ shall immediately discontinue reproduction and return or destroy, at Adobe's option, the Master Media and Adobe Product Packages in the Inventory, and Confidential Information, and all copies in its possession of the foregoing (including copies
placed in any storage device under ▇▇▇▇▇' control). For the avoidance of doubt, if termination is due to the fault of ▇▇▇▇▇, the costs of destruction in terms of this Clause 14.5.1 shall be borne by ▇▇▇▇▇.

14.5.2
Payment of Inventory

▇▇▇▇▇ shall cooperate with Adobe to sell and/or move Inventory to either Adobe or Adobe's Designated Destination (at Adobe's sole discretion) such that the sale and/or move may be completed within 7 days of the termination. Adobe shall have no
obligation to purchase Inventory unless, prior to termination, said Inventory was purchased by ▇▇▇▇▇ pursuant to a Print Authorisation form or Purchase Order submitted by Adobe.

14.5.3
Termination Compensation

▇▇▇▇▇ shall not be entitled to any compensation, damages or payments in respect of any goodwill that has been established or for any damages on account of prospective profits or anticipated sales, and neither party shall be entitled to reimbursement
in any amount for training, advertising, market development, investments or other costs that shall have been expended by either party before the termination of this Agreement, regardless of the reason for, or method of, termination of this Agreement
and each party waives its rights under applicable laws for any such compensation, reimbursement, or damages. Except as provided in Clause 14.5.2, Adobe will have no further liability for any costs or expenses relating to the Inventory on the
date of termination;

14.5.4
Transfer of Data

▇▇▇▇▇ shall immediately provide Adobe with current and accurate copies of Adobe Product Packages, Documentation, Master Media, Inventory, IP Rights, Confidential Information, and related materials relating to the Adobe Product Packages and all other
data which in the reasonable opinion of Adobe is required to enable Adobe to continue reproduction of the Adobe Product Packages with another supplier, provided that such other materials or information is not ▇▇▇▇▇' confidential information.
Notwithstanding the foregoing provisions of this Clause 14.5.4, at Adobe's request, prior to such termination being effective, ▇▇▇▇▇ shall provide all reasonable assistance to Adobe to enable Adobe to effect an orderly transfer of the
performance of ▇▇▇▇▇ obligations described in this Agreement from ▇▇▇▇▇ to a third party of Adobe's choice. Such assistance shall include the provision of all of the items referred to above in this Clause 14.5.4.

14.5.5
Survival of Obligations

▇▇▇▇▇ agrees that its obligations pursuant to Clauses 2.1 ("Ownership of Adobe Product Packages"), 2.6 ("No Right to Copy"), 2.8 ("Adobe Special Printing Aids or Equipment"), 7 ("Payments"), 8 ("Warranty"), 9 ("IP Rights and Confidential Information")
, 10 ("Proprietary Notices and Trademarks"), 11 ("Patent, Copyright and Trademark Indemnity"), 13 ("Right of Audit"), 14.5 ("Rights Upon Termination") and 16 ("Miscellaneous") shall survive any termination or expiration of rights under this
Agreement.

15.
LIMITATION OF LIABILITY.

ADOBE WILL NOT BE LIABLE FOR ANY LOSS OF USE, INTERRUPTION OF BUSINESS, COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY OR SERVICES OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF
THE FORM OF ACTION WHETHER IN CONTRACT, DELICT (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY OR ANY OTHER LEGAL OR EQUITABLE THEORY EVEN IF ADOBE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

16.
MISCELLANEOUS

16.1
Notices

All notices or reports permitted or required under this Agreement shall be in writing and shall be by personal delivery, registered mail or by reputable international courier service. Notice shall be deemed to have been given upon personal delivery,
on the date shown on the receipt for registered mail or on the date of delivery shown in the business records of the international courier service. The addresses for service shall be:

For Adobe:
For the attention of:
President of Adobe Systems International, Inc.
▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇
▇▇▇ ▇▇▇▇
▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ - 2704
USA

with a copy to:

Senior Vice President and General Counsel
Adobe Systems Incorporated
▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇
▇▇▇ ▇▇▇▇
▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇ - 2704
USA

For Sykes:
For the attention of:

The Managing Director
▇▇▇▇▇ Enterprises Incorporated, B.V.
▇▇▇▇▇▇▇▇▇ ▇▇
▇▇▇▇ ▇▇ ▇▇▇▇▇▇▇▇▇
▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇

or as subsequently notified by the parties from time to time.

16.2
Assignation

The rights and interests of Sykes under this Agreement are not assignable without prior written consent of Adobe. Any sale or other transfer of substantially all of Sykes' assets by consolidation, merger or reorganization, of a majority of the voting
stock of Sykes, shall be an assignation for purposes of this Agreement. The rights and interests of Adobe under this Agreement are fully assignable by Adobe subject to credit approval by Sykes. Subject to the foregoing, this Agreement shall be
binding on and inure to the benefit of the parties of this Agreement and their respective successors and assignees.

16.3
Governing Law and Forum

The terms of this Agreement shall be governed by the Laws of Scotland and the parties hereto hereby submit to the exclusive jurisdiction of the Court of Session Scotland.

16.4
Severability

If any provision of this Agreement is declared by a court of competent jurisdiction to be invalid, void, or unenforceable, the remaining provisions nevertheless will continue in full force and effect without being impaired or invalidated in any way
and the parties agree to substitute for the invalid provision a valid provision approximating the intent and economic effect of the invalid provision.

16.5
Entire Agreement

This Agreement including the Schedule contains the entire agreement between the parties and supersedes any and all other agreements, whether written or oral, between the parties relating to the same subject matter, except as may be subsequently
provided in writing and agreed upon by the parties. In the event of a conflict or inconsistency between this Agreement or the Schedule and any terms and conditions attached to a Print Authorisation form or Purchase Order then the provisions of this
Agreement or the Schedule shall prevail with respect to the specific provisions to which such conflict pertains.

16.6
Modification and Waiver

No supplement, modification, or amendment of this Agreement shall be binding unless executed in writing by both of the parties. No waiver of any of the provisions of this Agreement shall be deemed or shall constitute a waiver of any other provision
(whether or not similar) nor shall such waiver constitute a continuing waiver. The failure of either party to require performance by the other party of any provision of this Agreement shall not affect the full right to require such performance at any
subsequent time, nor shall the waiver by either party of a breach of any provision of this Agreement be taken or held to be a waiver of the provision itself.

16.7
Section Headings

Section headings are inserted for convenience only and will not be considered to define, limit or affect the interpretation or construction of this Agreement.

16.8
Country of Origin

Sykes shall, where possible, provide Adobe, prior to the initial delivery of any Adobe Product Package, with a certificate of origin for such Adobe Product Package. If the country of origin for any Adobe Product Package should change, Sykes shall
provide a new certificate of origin prior to the delivery of any Adobe Product Package affected by such change. Further, where Components are provided to Adobe by a supplier which is a company registered in Scotland, Sykes shall procure that said
company provides Adobe with a certificate of origin for said Components.

16.9
Compliance with Laws

Sykes shall, in carrying out this Agreement, comply with all statutes, ordinances, codes, instruments, regulations, resolutions, rules,, requirements and directives and all decisions, judgements, writs, interdicts, injunctions, orders, decrees or
demands of courts, administrative bodies and other authorities having jurisdiction over the subject matter of this Agreement.

IN
WITNESS WHEREOF these presents on this and the preceding twenty-four (24) pages together with the Schedule in nine (9) parts attached hereto are executed
as follows:

For
and on behalf of
ADOBE SYSTEMS INTERNATIONAL LIMITED PARTNERSHIP
by Adobe Systems International, Inc. its General Partner

on January 26, 2000

/s/ ▇▇▇ ▇▇▇▇▇▇
▇.▇. ▇▇▇▇▇▇, President

For and on behalf of
SYKES EUROPE LIMITED
by a Director thereof

on January 26, 2000

/s/ ▇▇▇▇▇ ▇. ▇▇▇▇▇▇▇
▇▇. Vice President and Director

before the following witness

/s/ ▇▇▇▇▇ ▇. ▇▇▇▇▇▇
Witness

Director

▇▇▇▇▇ ▇. ▇▇▇▇▇▇
Full Name

▇▇▇ ▇. ▇▇▇▇▇ ▇▇. ▇▇▇. ▇▇▇▇
Address

▇▇▇▇▇, ▇▇ ▇▇▇▇▇

THIS
IS THE SCHEDULE IN NINE (9) PARTS REFERRED TO IN THE FOREGOING AGREEMENT
BETWEEN ADOBE SYSTEMS INTERNATIONAL LIMITED PARTNERSHIP AND SYKES EUROPE LIMITED

Part 1

▇▇▇▇ of Materials

Part
2

Master
Production Schedule

Part 3A

Print Authorisation form

WH
COMP
DES
ON
HAND
ON
ORDER
DATE
DUE
ALLOC
11/10
ALLOC
18/10
ALLOC
25/10
ALLOC
03/12
TOTAL
MTD
M1
M2
M3
M AVG
FREE
11/10
FREE
18/10
FREE
25/10
FREE
01/11
F/C TO
03/12
COMMENT
WK
SHORT
WK SHORT QTY

XC
9001-9056
PHSP 5 5 M UPG BOX D
0
0
"NULL"
0
150
150
0
300
0
0
0
0
0
0
-150
-300
-300
-300
5000 ordered
2
-150

XC
9001-9057
PHSP5 5 PC UPG BOX D
0
0
"NULL"
900
150
150
0
1200
0
0
0
0
0
-900
-1050
-1200
-1200
-1200
4,000 ordered today
1
-900

XC
9001-9058
PHSP5 5 MW P4 UPGS D
0
0
"NULL"
300
0
0
0
300
0
0
0
0
0
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
10,000 ordered today
1
-300

XC
9001-9059
PHSP5 5 MW 5 UPGS D
0
0
"NULL"
600
300
300
0
1200
▇
▇
▇
▇
▇
-▇▇▇
-▇▇▇
-1200
-1200
-1200
10,000 ordered today
1
-600

XC
90019159
BRO AEFT 4 1MP.GENGB
0
0
"NULL"
0
200
100
0
300
0
0
0
0
0
▇
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
await files - build w/out
2
-200

XC
90019162
STK ▇▇▇▇.▇▇▇.▇▇▇.▇▇
0
0
"NULL"
50
5
0
0
55
0
0
0
0
▇
-▇▇
-▇▇
-▇▇
-▇▇
-▇▇
await files
1
-50

XC
90019163
STK PHLE.5MP.GEN.D
0
0
"NULL"
0
500
0
0
500
0
0
0
0
0
▇
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
await files
2
-500

XC
90019165
STK PHLE.5MP.GEN.S
0
0
"NULL"
0
5
0
0
5
0
0
0
0
0
▇
-▇
-▇
-▇
-▇
await files
2
-5

XC
90019168
STK ▇▇▇▇.▇▇▇.▇▇▇.▇▇
0
0
"NULL"
0
5
0
0
5
0
0
0
0
0
▇
-▇
-▇
-▇
-▇
await files
2
-5

XC
90019172
CD PHSP5.5MP.GEN.I
0
0
"NULL"
122
420
390
0
932
0
0
0
0
0
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
-▇▇▇
await gm
1
-122

Part 3B

Purchase
Order

[Blank
Purchase Order]

[Exhibit]

TERMS AND CONDITIONS OF PURCHASE

1.DEFINITIONS AND INTERPRETATION

In
this document, the following words and expressions shall have the following meanings. "Conditions" means these terms and conditions and any terms on the Purchase Order;
"Contract(s)" means contract(s) for the purchase of Services and/or Goods between us and you constituted by our submission of a Purchase Order and your acknowledgement thereof; "Price' means the total
price stated for your performance of the Scope of Work as detailed an the Purchase Order (subject to Clause 3): "Purchase Order(s)" means the Purchase Order(s) to which these Conditions are
attached; "Scope of Work" means the services (the "Services") we propose you perform as set out in the Purchase Order and/or any goods to be provided whether relative to such Services or not, (the
"Goods') as such Services and/or Goods may be varied by agreement in writing between you and us from time to time; "us" means Adobe Systems Europe Limited and its subsidiaries and associated companies
("our" and "we' being construed accordingly); "you" means the supplier of Services and/or Goods detailed in the attached Purchase Order ("your" being construed accordingly).

2.ACCEPTANCE OF CONDITIONS

All
orders for Services and/or Goods placed by us shall be subject to these Conditions. These Conditions shall be deemed to be incorporated in any and all Contracts. These Conditions
constitute the whole agreement between you and us to the exclusion of any other terms and conditions on which any other documentation from you may have been submitted, or subject to which any Purchase
Order is accepted or purported to be accepted by you. Purchase Order(s) and Contract(s) between you and us may not be modified or varied unless we specifically accept the modification or variation in
writing, or it is permitted by the terms of the Conditions. If there is any conflict between these Conditions and the conditions in any communications from you whether upon initial acceptance of these
Conditions or at any time thereafter, these Conditions shall prevail.

3.PRICE

The
Price of the Services and/or Goods and payment terms are as stated in the relevant Purchase Order and the Price shall include any applicable charges, including but not limited to
freight charges, insurance, packaging customs duties and any and all costs of supply, including but not limited to the installation of any Goods if applicable, where installation is to be performed by
you as required by the Scope of Work. The Price also includes your customary discount for prepayment, prompt payment, bulk purchase or volume purchase (as applicable). The Price excludes Value Added
Tax (which is payable by us. where relevant, subject to receipt of a valid VAT invoice).

4.SCOPE OF WORK

You
shall perform the Services and/or supply the Goods in accordance with the Scope of Work. We may vary the Scope of Work at any time, and you shall be deemed to have accepted any
such variation(s) within 7 days of the date of our written despatch of such variation(s) unless you advise us in writing within such period that you reject such variation(s). If you reject any
variation(s) as aforesaid we may revert to the original Scope of Work or cancel the Purchase Order(s) in question without penalty.

5.INSPECTION

We
may review the Services during performance and/or inspect and test the Goods during design, manufacture, processing or storage as applicable and you shall provide us with all
facilities to enable us to undertake any such review; any such inspection, review and/or testing is without prejudice to Clauses 11 and 12. If we are not satisfied that the Services and/or Goods
comply in all respects with the Purchase Order(s). the Scope of Work and/or these Conditions and we so inform you, either orally or in writing. you shaft take such steps as are necessary to ensure
compliance, without extra cost to us.

6.PACKAGING; COMPLIANCE WITH STANDARDS

You
shall comply with all applicable regulations and other legal requirements, including but not limited to EC requirements, concerning manufacture, performance, storage, packing,
packaging and delivery of the Services and/or Goods.

7.PERFORMANCES OF SERVICES/DELIVERY OF GOODS

You
shall deliver any Goods required in terms of the Scope of Work to the address stated on the Purchase Order(s). during our normal business hours on the delivery date(s) specified
in the Purchase Order. You shall perform the Services in accordance with the times(ales specified in the Purchase Order(s). The time(s) and date(s) of performance of the Services and/or delivery of
the Goods shall be of the essence of the relevant Con13'ac't(s). We may cancel any Purchase Orders and rescind the relevant Contracts if performance or deliveries are not made in accordance with these
Conditions of, where performance and/or delivery is to be made by installments and you fail to make any or alt of such installments in accordance with the performance timetable or by the delivery
dates stated in the Purchase Order. Our exercise of any such rights shaft be without prejudice to our other rights under the Contract in question. If urgent performance or delivery is necessary due to
your failure to perform or deliver to schedule, you shall be responsible for any extra charges you incur in such urgent performance or delivery

8PAYMENT

We
shall make payment to you only pursuant to your valid and correct invoice. All such invoices must stipulate our purchase Order number, a description of Services to which it relates
and/or a description and the quantity of the Goods to which it relates. Following our receipt of your correct invoice, we shall pay such invoke within 30 days of the date of receipt of such
invoice but payment by us shaft not constitute any admission by us of your satisfactory performance of your obligations. We may set of/any or all sums due to us by you against any or all sums due to
you by us under any Contract(s) or otherwise.

9.OWNERSHIP

Property
any Goods shall pass to us upon delivery, unless payment for the Goods is made prior to delivery, when it shall pass to us once payment has been made and the Goods have been
appropriated to the Purchase Order(s) in question. Risk of loss or damage to any Goods shall only pass to us on delivery at our premises in accordance with Clause 7 of these Conditions. We may
cancel any Purchase Order(s) without penalty at any time by giving you written notice.

11.QUALITY

You
warrant and represent that the Services and/or Goods shall conform in all respect5 to the description stated in the relevant Purchase Order(s) and-to the Scope of Work
and otherwise with any and all statements and/or undertakings made by you and your servants or agents, prior to us placing the relevant Purchase Order(s) whether in any trade literature of otherwise
end shall be otherwise fit for the purpose for which they are intended This warranty shall be in addition to and without prejudice to any statutory rights we may have.

Without
prejudice to the foregoing, you warrant and represent to us that all the Services and/or Goods shall be of first class quality and recognise that Purchase Order(s) will be
placed relying on your skill and expertise and any statements and representations made by you. If any of the Services and/or Goods are defective or inferior in quality upon performance or delivery or
prove to be defective or inferior in quality within 12 months of performance or delivery (or such longer period as may be stipulated in the Purchase Order(s) in question) whether or not during
any process in our business or thereafter, then we may require you without prejudice to our other rights (at your sole cost and expense) to (i) refund the Price (or obtain a credit in relation
to any invoices rendered but not paid); or (ii) rectify the defects, or (iii) in the case of Services, to correct such defective or inferior Services. or (iv) replace the Goods.
You shall bear all risk of loss of or damage to Goods or loss or damage caused by the Services after our notification to you that such

Services
and/or Goods are defective or inferior in quality. All the obligations in this Clause 11 shall further apply to any such rectified or replacement Services and/or Goods. For the
avoidance of doubt, any deviation from the Scope of Work regarding inspected samples shall give us the right to cancel the whole or any part of the Purchase Order(s) in re, abort to which such samples
are drawn.

We
shall assume, unless you advise us to the contrary, that any Services and/or Goods supplied by you which are comprised of computer hardware and/or software (including but not
limited to embedded microprocessors and/or microcode) shall conform with The British Standards Institute's DISC PD2000-1 standard concerning
Year 2000 compliance We reserve the right to cancel any Purchase Order without penalty where you have advised us that the Services and/or Goods to be supplied by you do not conform with such standard.
This right shall be without, prejudice our other rights and remedies.

12.INDEMNITY

You
shall keep us fully and effectively indemnified in respect of all liabilities, damages, costs and expenses, arising from: (a) any and all claims for infringement of the
intellectual property rights of any third party by reason of your performance of the Services or use or sale of the Goods supplied and any action for such infringement under which we may become liable
including but not linked to any claim for payment of royalties; and (b) any and all claims in contract, delict, tort or otherwise for direct and/or indirect damages to property or injury or
loss to any person, firm or company or for any consequential loss or loss of profit or production (including but not limited to any downtime) arising out of, or occasioned by (i) any and all
errors in Goods and/or Services supplied by you; and/or (ii) any and all failures or delays in performance and/or delivery under Clause 7; and/or (iii) any and all breaches of
Clause 11 and/or otherwise occasioned as a result of any act omission, default or misrepresentation by you or any one of your servants cc agents or sub-contractors. Our rights and
remedies under this Clause 12 shall be without prejudice to any other rights or remedies we have under common law or statute. The obligations contained in this Clause 12 and our rights
in terms of Clause 11 shall survive the termination or performance of the relevant Contract(s).

13.INTELLECTUAL PROPERTY

All
intellectual property rights embodied in any software, artwork, designs, sketches, drawings, components, photography, or finished goods (and all design or preparatory works)
produced by you, your employees or sub-contractors in connection with any Purchase Order on our instructions or created by you, your employees or sub-contractors in performance
of the Scope of Work shall vest in us. You undertake to execute any formal assignation we may request and to assist us as we may record in formally registering such rights.

Without
prejudice to your obligations in Clause 12. it any portion of the rights identified in the preceding sub-paragraph is/are reserved by a third party, you
shall identify such third party and the nature of such rights in writing to us. You shall also obtain effective assignation(s) of or licenses to all such third party rights (for the benefit of such
party or parties as we may designate), and shall provide such evidence of such assignation(s) or licenses as we may from brae to brae request. The cost of obtaining such licenses or assignations shall
be deemed to be included in the Price.

14.TERMINATION

If
you become apparently insolvent, or have received an order made against you or entered into any composition or arrangement with your creditors or, if a company, you commence to be
wound up (not being a members voluntary winding up for the purposes of reconstruction or amalgamation) or carry on your business under a receiver or administrator tot the benefit of your creditors or
any of them, we may either (i) terminate any or all Contracts(s) with immediate effect by notice in writing to you or the receiver, administrator, or liquidator or to any person in whom the
Contract(s) may become vested, or (ii) give such receiver, administrator, liquidator or other person as the case may be the option of carrying out the Contract(s) subject to its providing a
guarantee for the due and faithful performance of the Contract(s).

If
you at any time breach any of the Conditions in relation to any Contract(s), we may cancel relevant Contract(s) then outstanding and withdraw any and all Purchase Order(s) open for
your acceptance at that time.

Termination
of any Contract(s) shall not affect the rights and remedies accrued by the parties as at the date of such termination or any rights or obligations which due to the nature
thereof are intended to survive termination (including but not limited to Clauses 11 and/or 12)

15.ASSIGNATION GOVERNING LAW

You
shall not assign or sub-contract any of your rights or duties under any or all of the Contract(s) without receiving our prior written approval. We may assign or
otherwise transfer the benefit and/or burden of any or all Contract(s) without restriction. These Conditions and all Contracts will be governed and construed in accordance with the Laws of Scotland
and you submit to the non-exclusive jurisdiction of the Scottish Courts.

Part 4
Specifications

SYKES
Real People Real Solutions.

Technical Specifications Report

Date:
15th April 1999

To:
▇▇▇▇▇ ▇▇▇▇▇▇▇, Adobe Systems Europe Limited
▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇, Adobe Systems Europe Limited

From:
▇▇▇▇ ▇▇▇▇▇▇, Sykes Europe Limited

Circulation:
▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇▇▇, ▇▇▇▇▇ Europe Limited

User Guide:

Page Size:
214 × 190mm

Material:
90gsm McQueen Special Matt

Cover Material:
240gsm ▇▇▇▇▇▇ Gloss

User guides can range in the number of colours printed throughout the guide from black only to 4 colour process and even a mixture of the two ie Black with two 4 colour sigs.

Getting Started:

Page Size:
214 × 190mm

Material:
90gsm McQueen Special Matt

Cover Material:
Self cover ie 90gsm McQueen Special Matt

Getting Started booklets are normally Black only and the cover is the same material as the text, however there are some exceptions and in this case the spec for the user guide should be used.

Quick Reference Card:

Panel Size:
214 × 190mm

Material:
250gsm Sovereign Gloss

Quick Reference Cards are normally Black and one PMS.

▇▇▇▇ (End User License Agreement)

Page Size
165 × 145mm

Material
90gsm McQueen Special Matt

Registration Card:

Size:
210 × 148mm

Material:
130gsm Sovereign Classical Matt

Product Support Card:

Page Size
235 × 120mm

Material:
230gsm Pacemaker

CD Holder:

Size:
130 × 128 mm

Material:
260gsm (1sided) Consort Board

CD holders should all be printed as 4 colour process with the exception of A180.0.

Letters

Page size:
210 × 190mm (A4)

Material:
80gsm Kestral

Generic Box Sleeve:

Overall Size:
240 × 630 mm

Material:
250gsm (2 sided) Sovereign Gloss board

Collection Box Sleeve:

Overall size:
214 × 178 × 240 mm

Material:
250gsm (2 sided) Sovereign Gloss board

Generic Box:

Size:
240 × 214 × 90mm

Material:
117g Test Liner, 105g Bogus/220 gsm Trucard

Box

Size.
240 × 214 × 40mm

Size:
240 × 214 × 40mm

Material:
620micron (1 sided) Sancote Board

Update/Upgrade Box:

Size:
240 × 214 × 40mm

Size:
240 × 214 × 90mm

Material:
▇▇▇▇▇ ▇▇▇▇▇/Test inner/B Flute

Collection Slipcase & Wedge:

Size:
210 × 175 × 245mm

Material:
260gsm Truecard / E Flute 127gsm Flutex / 180gsm Inner White top test

Part 5

DISC
PD—2000

DISC

A DEFINITION OF YEAR 2000 CONFORMITY REQUIREMENTS

Preamble to the Summer 1998 amendment

BSI DISC originally published PD2000-1 in January 1997 and it has been widely adopted. A review of the document was conducted by the
responsible committee (BDD/I/3) in the spring of 1998 taking into account comments received. The committee considered that amendments to the fundamental conformity requirements were neither necessary
nor desirable. The Definition and the four Rules are unchanged but, to add value to the document and aid its interpretation, the Amplification sections have been amended. This document,
PD2000-1:1998, replaces the previous version of PD2000-I but does not change its requirements. An additional document PD2000-4, entitled "PD2000- I in
Action" will provide further information on PD2000-l: 1998 together with information on its use.

Paragraph
numbers have been enhanced in the Amplification section to aid referencing and substantial revisions to the document are indicated by side lines against the changed text.

Introduction

This document addresses what is commonly known as Year 2000 conformity (also sometimes known as century or millennium compliance). It provides a definition of
this expression and requirements that must be satisfied in equipment and products which use dates and times.

It
has been prepared by British Standards Institution committee BDD/I/3 in response to demand from UK industry, commerce and the public sector. It is the result of work from the
following bodies whose contributions are gratefully acknowledged: BT, Cap Gemini, CCTA, PricewaterhouseCoopers, ▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇, ICL, National Health Service. National Westminster Bank. Additionally,
BSI DISC acknowledges the support of the Electronics and Information Industries Forum (EUF), Action 2000, Taskforce 2000 and Digital Equipment as well as the [original bodies for their
participation in the review of this document.

BSI
DISC would also like to thank the following organizations for their support and encouragement in the development of this definition: Barclays Bank, British Airways, Cambridgeshire
County Council, Computer Software Services Association, Department of Health, Ernst & Young, Federation of Small Businesses, IBM, ICI, National Power, Paymaster Agency, Prudential Assurance,
Reuters. Tesco Stores.

While
every care has been taken in developing this document, the contributing organizations accept no liability for any loss or damage caused, arising directly or indirectly, in
connection with reliance on its contents except to the extent that such liability may not be excluded at law. Independent legal advice
should be sought by any person or organization intending to enter into a contractual commitment relating to Year 2000 conformity requirements.

This
entire document or the Definition section (including the four Rules) may be freely copied provided that the text is reproduced in full, the source acknowledged and the reference
number of this document is quoted. It is recommended that the Amplification section be included. References to "PD2000-1:1998" shall be interpreted as meaning the entire document.

The Definition

Year 2000 conformity shall mean that neither performance nor functionality is affected by dates prior to, during and after the year 2000,

In
particular:

Rule 1 No value for current date will cause any interruption in operation.

Rule 2 Date-based functionality must behave consistently for dates prior to, during and after year 2000.

Rule 3 In all interfaces and data storage, the century in any date must be specified either explicitly or by unambiguous algorithms or
inferencing rules.

Rule 4 -Year 2000 must be recognized as a leap year.

Part 6
Minimum Terms and Conditions

As
a condition to the grant by Adobe Systems International Limited Partnership to Sykes of a right and license to use Submanufacturers to make duplicate copies of the Software
Product(s) Sykes agrees to enter into an agreement with such Submanufacturers with terms that are at least as restrictive as the following:

licensors
and suppliers in such proprietary information. The obligations set forth in this Paragraph shall survive termination of this Agreement.

Should Adobe wish to order any of the following services, the prices are as follows:

[*]

*CONFIDENTIAL
TREATMENT REQUESTED
39

Part 8
SOP11-007

Manufacturing Operations

STANDARD OPERATING PROCEDURE

Document #:
11-007
Revision #:
0

Initiated By:
▇▇▇▇ ▇▇▇▇▇▇▇
Page I of 4

Release Date:
05/13/98
Released By:
▇▇▇▇ ▇▇▇▇▇▇▇

Title: Product Inspection Requirements for Turnkey Suppliers

1.
PURPOSE:

To define Adobe® Systems, Inc., product inspection requirements for turnkey suppliers.

2.
SCOPE:

The requirements defined by this document applies to any partnership established between Adobe® Systems, Inc. Manufacturing Operations and a third-party turnkey
supplier.

3.
REFERENCES:

None

4.
DEFINITIONS:

Defect: A departure of a quality characteristic from its intended level or state that occurs with a severity sufficient to cause an associated product or service not to satisfy intended normal, or reasonably foreseeable, usage
requirements.

Final Assembly: The highest level assembled product, prior to shrink wrap.

Major Defect: A defect that may render the product unfit for use; would be noticed by the consumer, and will likely reduce product salability.

Minor Defect: A defect that will not affect usability of the product; unlikely to be noticed, and of little concern to the consumer.

Subassembly: An assembly that is used at a higher level to build another assembly or included in the final assembly.

5.
PROCEDURES:

5.1
Lot Requirements:

5.1.1
Lot: The total quantity of final assembly units on one (1) pallet, accumulated under uniform conditions for sampling purposes.

5.1.2
Sub-Lot: A quantity of final assembly units representing a fraction of one (I) lot, accumulated under uniform conditions for sampling purposes; i.e.:

5.1.2.1
1 pallet of 200 Units = I 0 Sub-Lots/20 Units Per Lot

5.1.2.2
1 pallet of 400 Units = 20 Sub-Lots/20 Units Per Lot

5.2
Sample Requirements:

5.2.1
5% of one lot = 1 in 20 units manufactured.

5.2.2
5% of subassemblies built in advance of the final assembly.

5.3
Sample Selection:

5.3.1
Final Assembly: At minimum, samples selected for inspection will have completed the assembly process post final weigh scale (if used), and
prior to shrink-wrapping.

5.3.2
Subassembly: At minimum, samples selected for inspection will have completed the sub-assembly process.

5.4
Inspection Requirements:

5.4.1
Final Assembly:

All final assembly samples are inspected through the subassembly level unless the subassemblies were built, sampled, and inspected prior to final assembly. All inspections will be performed
in a manner that will not damage or destroy any components.

5.4.1.1
Visual Defects

5.4.1.2
Build Accuracy

5.4.2
Subassembly:

5.4.2.1
Visual Defects

5.4.2.2
Build Accuracy

5.5
Defect Classifications:

5.5.1
Major:

5.5.1.1
Cosmetic: Pages unglued, large spots, streaking, gouges, tears, or nicks on the visible ("Panel A") area impacting copy and/or graphics; coating defects that
affect the visual appearance of the component, i.e., blistering, peeling, cracking, or creasing over more than 25% of the print area.

5.5.1.2
Damaged: Any defect that affects the functionally of the component. This can include, but not be limited to, broken, cracked, crushed, defaced, gouged, and
torn.

5.5.1.3
Extra: Additional security sensitive component(s) found in product. Security sensitive components include CDs, CD Keys, Diskettes, Dongles, and Serial Number
Labels.

5.5.1.4
Missing: Required component(s) not found in product.

5.5.1.5
Wrong: Incorrect component(s) found in product or serialization matching error.

5.5.2
Minor:

5.5.2.1
Cosmetic: Slight dog-ears of pages or a slightly bent cover, coating has slight cracking, or minor folding defects; minor scratches, smudges, hickeys, spots, nicks,
streaks, or creases that cover minimal surface areas and do not render copy/graphics illegible.

5.5.2.2
Extra: Additional component(s) not classified as security sensitive.

5.5.2.3
Orientation: Component(s) not in order specified, label placement incorrect or skewed.

5.6
Acceptance Requirements:

5.6.1
Accept = 0 Reject = 1

5.6.2
Rejected lot(s) is segregated and 100% inspected/reworked.

5.6.3
If sub-lots were utilized in accordance with Section 5.1.2, the turnkey supplier's process must be able to accurately identify and segregate the sub-lots for 100% inspection and rework.

5.6.4
All in-process product will be 100% inspected/reworked, up to the point in the process where the defect was found.

5.6.5
No product shall be dispatched until all the activities specified in this document have been satisfactorily completed and the associated data and documentation are available and authorized.

5.7
Inspection and Test Records:

5.7.1
The turnkey supplier shall establish and maintain records which provide evidence that the product has been inspected. These records shall show clearly whether the product has passed or failed the inspections according to the defined acceptance
criteria.

5.8
Control of Nonconforming Product:

5.8.1
The turnkey supplier shall establish and maintain documented procedures to ensure that product that does not conform to the requirements specified in this document, is prevented from unintended use. This control shall provide for identification,
documentation, evaluation, segregation, and disposition of nonconforming product.

5.9
Release of Product:

5.9.1
No product shall be released until all the inspection activities specified in this document have been satisfactorily completed and the associated data and documentation are available and authorized.

5.9.2
No pallet shall be released until a pallet audit has been conducted in order to verify master canon labels and any other pallet identification tags or documentation.

5.10
DPPM Calculation:***

[*]

5.11
Reporting:

5.11.1
Major/Minor DPPM Rates: Weekly

5.11.2
Cumulative Major/Minor DPPM Rates: Monthly

5.11.3
Pareto of Defects: Weekly

5.11.4
Cumulative Pareto of Defects: Monthly

5.12
Performance Grading:

5.12.1
Once per quarter, turnkey suppliers are evaluated on quality performance (Major DPPM)

MIN AQL
MIN % Yield
Major DPPM
Points

[*]

6.
DOCUMENT HISTORY:

6.1
New; defines Adobe® Systems, Inc., product inspection requirements for turnkey suppliers;

*CONFIDENTIAL
TREATMENT REQUESTED
43

Part 9
Statement of Work

Adobe Order Fulfillment
Statement of Workversion 6.1

December 1999

Table of Contents

TABLE OF CONTENTS
2

1.
EXECUTIVE SUMMARY
5

1.1
THIS DOCUMENT
5

1.2
ADOBE ORDER FULFILLMENT EXPECTATIONS
5

1.3
ADOBE ORDER FULFILLMENT OBJECTIVES
5

1.4
ADOBE ORDER FULFILLMENT RESPONSIBILITIES
6

1.5
SYKES OBJECTIVES
6

1.6
SYKES RESPONSIBILITIES
7

2.
SERVICE MANAGEMENT
7

2.1
ACCOUNT MANAGEMENT STRUCTURE & RESPONSIBILITIES
7

2.1.1
Client Account Manager
7

2.1.2
New Project Implementation
7

2.2
KEY OPERATIONAL TEAMS
8

2.2.1
Engineering Change Control (ECC)
8

2.2.2
Work In Progress (WIP)
9

2.2.3
Purchasing
9

2.2.4
Print Services
9

2.2.5
Freight Management Traffic
10

2.2.6
IT
10

2.3
ESCALATION
11

2.3.1
Complaints
11

3.
PRODUCTS & SERVICES
12

3.1
COMPONENT MANAGEMENT
12

3.1.1
Printed Components
12

3.1.2
File Transfer
12

3.1.3
Media Masters
13

3.1.4
First Article Sign-off
13

3.2
ASSEMBLY
14

3.2.1
BOMS
14

3.2.2
Product Assembly
14

3.2.3
Fonts and VPP
17

3.2.4
Serial Number Generation
18

3.3
DISTRIBUTOR ORDER FULFILLMENT
19

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of
Adobe Systems, Inc. This material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed, shall be returned
immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.4
EDI MESSAGING—TIMESCALES
19

3.5
INVENTORY MANAGEMENT
20

3.5.1
Inventory Control
20

3.5.2
Cycle Counting
20

3.5.3
Warehousing
21

3.5.4
Warehouse Security
21

3.5.5
Inventory Obsolescence
22

3.5.6
Goods Inward
22

3.6
DISTRIBUTION
23

3.6.1
Carrier Management
23

3.6.2
EU/Non EU Customs
23

4.1.2
Other Services
29

4.2
QUALITY
29

4.3
BUSINESS CONTINUITY
29

5.
REPORTING
30

6.
KEY PERFORMANCE INDICATORS
31

6.1
ON TIME DELIVERY (SALES ORDER)
31

6.2
QUALITY
31

6.3
CYCLE COUNT (FINISHED GOODS)
31

APPENDIX A
Q 2S04—CORRECTIVE ACTION
▇▇

▇▇▇▇▇▇▇▇ ▇
IPC06—CREATION OF ▇▇▇▇ OF MATERIALS
33

APPENDIX C
IPC07 AMENDMENT OF ▇▇▇▇ OF MATERIALS
34

APPENDIX D
IPC09 CREATION & AMENDMENT OF WORKS ORDER
35

APPENDIX E
ADO01 ADOBE BUILD TO ORDER
36

APPENDIX F
MAN09 PRODUCT ASSEMBLY
37

APPENDIX G
IPC04 CREATION/AMEND. OF MASTER SAMPLE
38

APPENDIX H
DIST02—PICKING
39

APPENDIX I
DIST04—PACKING
40

APPENDIX J
DIST05—ADOBE TRADE CONTINGENCY
41

APPENDIX K
PIC02—CYCLE COUNTS
42

APPENDIX L
STOR01—INCOMING STORES CONTROL
43

APPENDIX M
SOP01—TEAM LEAD
▇▇

▇▇▇▇▇▇▇▇ ▇
SOPPU—ADOBE RMA
45

APPENDIX O
VPP
46

1. Executive Summary

1.1 This Document

This
document describes the processes and environment under which the Adobe Order Fulfillment business will be managed at Sykes. The document itemises the activities undertaken,
required performance standards and associated negotiated costs. The Statement of Work (SOW) should be seen as a live document and updated as and when necessary.

All
procedural charts are uncontrolled documents and are subject to change.

1.2 Adobe Order Fulfillment Expectations

•[*]

1.3 Adobe Order Fulfillment Objectives

•[*]

1.4 Adobe Order Fulfillment Responsibilities

•[*]

1.5 Sykes Objectives

•[*]

1.6 Sykes Responsibilities

•[*]

2. Service Management

Overall
responsibility for the performance and management of the Adobe Order Fulfillment lies with the Client Account Manager (CAM) The CAM reports to the Client Services manager who
in turn reports to the Director of Business Operations (CPS).

2.1 Account Management Structure & Responsibilities

The
Sykes organisational structure consists of a core management team dedicated to Adobe programmes with responsibility for delivering all aspects of a clients business, whether it is
implementation of a project or discussing a new service. The Account or Project owner sit in the centre of the circle and call on the skills, knowledge and expertise of specialist functions within the
organisation.

2.1.1 Client Account Manager

[*]

2.1.2 New Project Implementation

The
CAM will be the project leader for all new project introductions for Adobe Order Fulfillment. This management process will include:

•Chairing
regular launch meetings—internal & external
•Provision
and monitoring of all project timelines and milestone delivery

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

•Liaison
with operational units to ensure all necessary information received
•Ensure
volume forecast from Adobe received
•Work
with Client Business manager on Pricing]

2.2 Key Operational Teams

2.2.1 Engineering Change Control (ECC)

•
Artwork
Receipt, logging, checking, proofing

•
Disk Mastering
Set up, sign-off, label overprint

•
BOMS
Part number/Full stock details, creations, management of finished SKU BOMS including entry, checking, amendments, deletions, manufacturing sample control.

Components
Management of components (new & reprints) free issues (components & finished goods), delivery monitoring

Forecasts
Entry, Amendment, deletion

CD ROM
Golden master control, specifications, re-orders POP, delivery monitoring

Sign off
First article checks, press checks, CD's, master print sample control

2.2.2 Work in Progress (WIP)

•
Works orders
loading, trial kits, de-kits, completion, manual orders

•
Serial Numbers
generation and management

•
Scheduling
in conjunction with Planners

•
RNA
breakdown, reworks, destruction

•
BTO/Rapid Response
management and release

•
Reporting
supply/demand, order status, monthly production analysis

•
MPS
forecast entry

•
Distribution
charges pre-paid creation

•
Winsoft
supply components and serial numbers to Winsoft in France for Middle Eastern versions of PhotoShop, PageMaker & Acrobat

2.2.3 Purchasing

•
3rd Party
Vendor Management, placing of orders, pricing negotiation, performance monitoring

•
Quality audits
assist Q/A with quality audits of 3rd parties

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

•
Market research
Ensuring competitive pricing is applied by all vendors by benchmarking activities and identifying new potential suppliers

•
Raw material supply
Monitoring the demand storage and supply of raw materials required for manufacture and distribution of all Adobe products

2.2.4 Print Services

•[*]

2.2.5 Freight Management/Traffic

•[*]

2.2.6 IT

•Systems
support for all manufacturing and fulfillment requirements (▇▇▇, ▇▇▇, ▇▇▇, MFG-Pro, Serial number generation program).

2.3 Escalation

Appropriate
escalation processes are in place to ensure continuity and control of the business. Any problem that is deemed to be business critical will be immediately escalated to the
appropriate level to ensure appropriate remedial as well as long term is taken.

Issues
should be escalated through correct channels, the following identifies the escalation within ▇▇▇▇▇:

[artwork]

2.3.1 Complaints

All
complaints raised by Adobe will be addressed through ▇▇▇▇▇ Corrective Action process that is governed by ▇▇▇▇▇ quality process QS04/01—See Appendix A.

In
the event of any quality complaints received from the field, the following action will be taken:

•Immediate
escalation to Adobe
•Internal
Sykes Action Request Form raised to responsible area
•All
remaining stocks of defective SKU quarantined
•Quality
check of all remaining stock
•Results
informed to Adobe and remedial action agreed

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

•[*]

3. Products & Services

3.1 Component Management

All
component specifications provided by Adobe are held on ▇▇▇▇▇ server in Galashiels, which is backed up each day of the working week. As contingency hard copy of all component
specifications are held at our Print facility.

3.1.1 Printed Components

The
following information is required for each new component item:

•Unique
part number
•Description
of item
•Initial
print/production run required
•Page
count (if applicable)
•Page
size (if applicable)
•Number
of colours Material requested
•File
due dates

3.1.2 File Transfer

When
transferring files to ▇▇▇▇▇ for the production of components the following is required:

•Confirmation
of the file format i.e. PC INTEL and name of file
•Versions
and fonts that the files are created in
•Details
of any required changes ▇▇▇▇▇ are to action to the files
•Expected
file availability date
•Location
of file e.g. Folder name
•Unique
file reference
•Hard
copy output
•Detail
of any problems experienced with output in US

3.1.3 Media Masters

Adobe
will advise when each new CID will be available detailing:

•Part
Number
•Description
•Initial
quantity

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

•Date
CD master due
•Lead-time
required
•Artwork
requirements

▇▇▇▇▇
will advise/be responsible for:

•Where
master is to be sent e.g. direct from Adobe to replicator
•Logging
of orders placed with replicator
•The
return of the master to ▇▇▇▇▇ 1 month after pressing
•Verification
of new CD

3.1.4 First Article Sign-off

▇▇▇▇▇
will be responsible for the checking of components received:

•New
order—against original technical specification supplied from Adobe
•Re-print—against
a master sample from ▇▇▇▇▇ managed component library

3.2 Assembly

3.2.1 BOMS

i)New BOMS

Adobe responsibilities:

•BOM
has accurate and unique part number
•Draft
BOMS delivered to ▇▇▇▇▇ 8 weeks prior to product launch
•Finalised
BOMS to ▇▇▇▇▇ 4 weeks prior to launch

▇▇▇▇▇
responsibilities.

•BOMS
accurately- entered on to ▇▇▇▇▇ production system. The process for this task is included as Appendix B—IPC06 Creation of ▇▇▇▇ of
Materials
•[*]

ii)Existing BOMS

Amendments to existing BOMS is governed by ▇▇▇▇▇ quality processes—see Appendix C -IPC07 Amendment of ▇▇▇▇ of Materials.

iii)Obsolete BOMS

Adobe is required to advise ▇▇▇▇▇ of all BOMS and component part numbers that are obsolete. ▇▇▇▇▇ are responsible for the deletion of these entries from ▇▇▇▇▇
inventory systems within [*] of notification by Adobe.

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.2.2 Product Assembly

Adobe
responsibilities:

•The
provision of adequate forecasting
•Identification
of both Make to Stock (MTS) and Build to Order (BTO) requirements
•Provision
of PO, split by SKU and price to initiate order cycle—this PO should send via EDI message from Adobe SAP to ▇▇▇▇▇ production system

▇▇▇▇▇
responsibilities:

•Receipt
and acknowledgement of PO via EDI message to Adobe SAP
•Establishment
of component availability
•Release
of work order for product assembly
•Confirmation
of work order completion against Adobe PO number via EDI massage to Adobe SAP
•Complete
order within [*] working days, assuming all components are available

The
following illustrates the timetable for order completion:

Period
Action
Owner

Day 1
PO sent to ▇▇▇▇▇ via EDI from Adobe SAP
Adobe

Day 2
▇▇▇▇▇ to have completed trial kit and confirm PO acceptance via EDI to Adobe SAP
▇▇▇▇▇

Day 5
Order completed on ▇▇▇▇▇ production system and Finished Goods booked on to MFG-Pro and Adobe SAP—Available to ship
▇▇▇▇▇

▇▇▇▇▇
maintain master production samples covering each Adobe SKU which are released to the assembly floor with each works order to act as a guide for production.

The
following covers the assembly process:

Appendix D—IPC09
Creation & Amendment of Works Order

Appendix E—AD001
Adobe Build to Order

Appendix F—MAN09
Product Assembly

Appendix G—IPC04
Creation and amendment of master sample

The
process overleaf details the PO receipt and acknowledgement procedure:

[Exhibit not available]

*CONFIDENTIAL TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is
given by an authorized representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all
copies made by or on behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.2.3 Fonts and VPP

Sykes is responsible for the management, assembly and fulfillment of both Font and VPP orders. The assembly process follows the Build to Order
process—see appendix E.

i)Fonts

•2
BOMS covering all SKU's (Mac and Windows)
•Adobe
will issue a PO for Font requirements
•▇▇▇▇▇
will issue works order for assembly to build

ii)VPP

As
for fonts VPP builds are handled through our rapid response cell.

Adobe
responsibilities:

•VPP
PO raised
•Email
VPP customer letter and CEULA as attachments to Sykes Sykes responsibilities:
•Rapid
response of VPP order
•Re-work
of product to incorporate VPP details via email from Adobe
•Completion
of order and receipt on to Adobe SAP (via EDI)

For
Current VPP Process see Appendix 0—VPP

3.2.4 Serial Number Generation

▇▇▇▇▇
are responsible for the management and generation of all serial number requirements for European production and have developed a fully automated system to deliver this service.
The following illustrates this process:

[Exhibit][*]

3.3 Distributor Order Fulfillment

Sykes
manage the shipment of Distributor sales orders on behalf of Adobe.

•Adobe
responsibilities:[*]

The
processes covering Distributor orders are detailed in:

•Appendix H—DIST02
Picking
•Appendix I—DIST04
Packing
•Appendix J—DIST05
Adobe Contingency

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.4 EDI Messaging Timescales

The
PO, assembly and shipping process requires the interaction of ▇▇▇▇▇ systems with Adobe's SAP. The details are as follows:

▇▇▇▇▇
will pick-up Adobe transmission every hour on the half hour. These transmissions will consist of the electronic documents:

•850—Purchase
Order
•860—Put-chase
Order Change
•940—Shipping
Order
•997—Document
Receipt Acknowledgement

Adobe
will-send these documents every hour on the hour. ▇▇▇▇▇ will send Adobe transmissions every hour on the half hour. These transmissions will consist of the electronic
documents:

•855—PO
Confirmation
•856—Shipping
(Build) Notification
•945—Shipping
Confirmation
•997—Document
Receipt Acknowledgement

▇▇▇▇▇
will return the 855 within 1 day of receiving a purchase order. Shipping (Build) notifications will be sent within 1 hour of goods being booked onto ▇▇▇▇▇ system.
The Shipping Confirmation will be transmitted within 1 hour of the shipment being confirmed in ▇▇▇▇▇ system.

Adobe
will send the Purchase Order document within 1 hour of a purchase order being created in Adobe's system. Purchase Order changes will be sent within 1 hour of
creation. Shipping Orders will be sent within 1 hour of creation.

Both
Adobe and ▇▇▇▇▇ will send the Document Receipt Acknowledgement within 1 hour of receiving a document.

3.5 Inventory Management

3.5.1 Inventory Control

▇▇▇▇▇
are responsible for the management of all Adobe finished goods inventories on behalf held on ▇▇▇▇▇ MFG-Pro system.

▇▇▇▇▇
will also ensure effective management of all component stocks to ensure continuance of supply.

It
is understood that ▇▇▇▇▇ will be responsible for the accurate management of all stock records and will be responsible for the update of all finished good inventory records on both
▇▇▇▇▇ MFG-Pro system and Adobe SAP via SAP terminal access provided by Adobe.

3.5.2 Cycle Counting

▇▇▇▇▇
responsibilities:

•[*]

The
cycle count process is included in Appendix K—‘IPC02 Cycle Counting

3.5.3 Warehousing

All
Adobe finished goods stocks are held in ▇▇▇▇▇ warehouse in Galashiels, Scotland. Adobe finished goods are stored as complete shrink-wrapped product and held in shipping cartons in
warehouse bin locations

Features
of the warehouse:

•Unique
system location
•Adobe
inventory held in designated Adobe areas to increase picking and counting efficiency
•High
security areas available for storage of high value items

3.5.4 Warehouse Security

•[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.5.5 Inventory Obsolescence

Adobe
responsibilities.

•Identification
and notification of all obsolete finished goods and component SKU's by part number and description
•Confirmation
of action required e.g. destruction

▇▇▇▇▇
responsibilities:

•Confirmation
of obsolescence notification received
•Confirmation
of action taken
•Update
of stock records on both MFG-Pro and SAP

Note:
[*]

3.5.6 Goods Inward

▇▇▇▇▇
responsibilities:

•Check
goods received are as specified on order notification and confirm receipt into ▇▇▇▇▇ production system if components or into MFG-Pro and
Adobe SAP 11 finished goods
•Check
delivery for quality/damage
•Confirm
receipt and log into inventory within 48 hours of receipt

▇▇▇▇▇
standardoods—In operating times are:

Monday - Thursday
08.30 - 17.30

Friday
08:30 - 16:30*

•▇▇▇▇▇
can accept deliveries 24 hrs per day by prior arrangement

For
deliveries of 3rd party stock managed by Adobe, ▇▇▇▇▇ request that 24 hours notice is given and full details including SKU, description and quantities are provided.

See
Appendix L—STOR01 Incoming Stores Control & Inspection

3.6 Distribution

▇▇▇▇▇
provides distribution services to Adobe:

•Carrier
management
•EU/Non-EU
Customs
•Helpdesk

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

3.6.1 Carrier Management

▇▇▇▇▇
have established strong relationships with a number of carriers which are utilised to ship on behalf of Adobe.

Adobe's
Distributor contracts will necessitate the requirement that ▇▇▇▇▇ will be required to liase with a high number of carriers with which we have no previous relationship. ▇▇▇▇▇
will be responsible for:

•Documentation
correct and available
•Scheduling
collections with all carriers

3.6.2 EU/Non EU Customs

▇▇▇▇▇
will:

•Provide
guidance on all customs clearance and duty issues for all imports into EU
•Ensure
correct duty and tax is paid
•Complete
all necessary documentation for shipments destined for Distributors inside and outside EU boundaries
•Liase
with Customs to resolve issues and enquiries

Helpdesk

The Adobe Helpdesk has been set up to provide an efficient method of controlling all Adobe distribution enquiries.

Opening
hours:

Monday - Friday
08:30 - 16:30*

*additional
cover is provided between 16.30 and 17.30 but will not provide the full coverage available during normal hours

Helpdesk
Services—see Appendix M—SOP01 Helpdesk

3.7 RMA

RMA's
will be handled as per ▇▇▇▇▇ existing procedures and any requirements to rework/dispose will be agreed prior to any action with Adobe.

•All
RMA returned from Goods In within 48 hours (<3000 units)
•Full
records of all returned material and subsequent actions are kept
•All
open or damaged product will be destroyed

The
existing RMA process is included as Appendix N—SOP07 Adobe RMA

The
following illustrates the messaging requirements between ▇▇▇▇▇ and Adobe for RMA:

[Exhibit][*]

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

4. General

4.1 Billing

4.1.1 Assembly

Adobe
will provide ▇▇▇▇▇ with an itemised PO for all material cost and assembly requirements. This PO will be:

•Split
by SKU (1 SKU per order line) and quantity
•Inclusive
of VAT
•In
GBP Sterling

Upon
completion of a finished goods work order ▇▇▇▇▇ will confirm receipt of the goods on to Adobe SAP via EDI message 856. This message will immediately initiate an automated payment
from Adobe SAP.

▇▇▇▇▇
assume that payments will be:

•Received
weekly
•Via
electronic transfer

4.1.2 Other Services

All
other services including Management Fee, Warehousing, Fulfillment will be covered monthly by Adobe PO.

4.2 Quality

▇▇▇▇▇
quality system has been in operation since 1989 and is designed to ensure ▇▇▇▇▇ maintain BS EN IS09002 registration.

4.3 Business Continuity

▇▇▇▇▇
has developed a business continuity plan to ensure the continuity of supply to Adobe. The plan is a dynamic document and is reviewed bi-annually.

The
plan has 2 main goals:

•Continuity
of service provision to Adobe
•Re-establishment
or normal operations

5. Reporting

▇▇▇▇▇
will provide the following reports to Adobe Order Fulfillment

Report:
Frequency:

Stock Order Report
[*]

Business Management Report
[*]

Cycle Count Analysis
[*]

Excess Inventory Report
[*]

Business Review (QBR)
[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

6. Reporting

6.1 On Time Delivery (Sales order)

No.
Title
Measurement
Target

1
On Time Delivery By Line
[*]
[*]

2
On Time Delivery By Unit
[*]
[*]

6.2 Quality

No.
Title
Measurement
Target

2
Major-DPPM
[*]
[*]

6.3 Cycle Count (Finished Goods)

No.
Title
Measurement
Target

1
Absolute Variance—non-security
[*]
[*]

2
Absolute Variance—security
[*]
[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized
representative of Adobe Systems, Inc. This material may not be distributed, reproduce or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on
behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems, Inc.'s request.

Appendix A
OS04 — Corrective Action

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Corrective Action
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.14

Procedure No.
QS 04
Rev. No.
1
Date
19-10-98
No. of Pages
4

Quality Systems Manager
Quality Systems Co-ordinator

IMPORTANT:

This procedure should be used when any of the following are received or highlighted:

A
client complaint;

A
report of product nonconformity related to ▇▇▇▇▇ Europe Limited activity;

A
report of component nonconformity;

A
nonconformity raised during any audit (i.e., internal, client, 2nd or 3rd party);

A
▇▇▇▇▇ Europe Limited Quality System nonconformity or nonconformity relating to ISO 9002;

Any
improvement or nonconformity identified by anyone regarding the activities of ▇▇▇▇▇ Europe Limited.

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Corrective Action
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.14

Procedure No.
QS 04
Rev. No.
1
Date
19-10-98
No. of Pages
4

Quality Systems Manager
Quality Systems Co-ordinator

Person identifying the need for action
Manager or Team Manager receiving
The "Action Request' Form

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Corrective Action
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.14

Procedure No.
QS 04
Rev. No.
1
Date
19-10-98
No. of Pages
4

Quality Systems Manager
Quality Systems Co-ordinator

Control and Verification of Action Requests

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Corrective Action
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.14

Procedure No.
QS 04
Rev. No.
1
Date
19-10-98
No. of Pages
4

Quality Systems Manager
Quality Systems Co-ordinator

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇

▇▇▇▇▇▇▇▇ ▇
IPC06—Creation of ▇▇▇▇ of Materials

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Creation of a ▇▇▇▇ of Materials
Uncontrolled copy #

Responsibility
Client Planning Administrator/Client Planning
Co-ordinator
ISO Ref.
4.5 & 4.10

Procedure No.
IPC 06
Rev. No.
0
Date
16-03-98
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Creation of a ▇▇▇▇ of Materials
Uncontrolled copy #

Responsibility
Client Planning Administrator/Client Planning
Co-ordinator
ISO Ref.
4.5 & 4.10

Procedure No.
IPC 06
Rev. No.
0
Date
16-03-98
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇

▇▇▇▇▇▇▇▇ ▇
▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ of ▇▇▇▇ of Materials

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Creation of a ▇▇▇▇ of Materials
Uncontrolled copy #

Responsibility
Client Planning Administrator & Client Planning
Co-ordinator
ISO Ref.
4.5 & 4.10

Procedure No.
IPC 06
Rev. No.
0
Date
16-03-98
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Amendment of a ▇▇▇▇ of Materials
Uncontrolled copy #

Responsibility
Client Planning Administrator & Client Planning
Co-ordinator
ISO Ref.
4.5 & 4.10

Procedure No.
IPC 07
Rev. No.
0
Date
16-03-98
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix D
IPC09 Creation & Amendment of Works Order

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Creation and Amendment of a Works Order
Uncontrolled copy #

Responsibility
Client Planning Co-ordinator/Administrator
ISO Ref.
4.9 & 4.10

Procedure No.
IPC 09
Rev. No.
1
Date
19-10-98
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Creation and Amendment of a Works Order
Uncontrolled copy #

Responsibility
Client Planning Co-ordinator/Administrator
ISO Ref.
4.9 & 4.10

Procedure No.
IPC 09
Rev. No.
1
Date
19-10-98
No. of Pages
2

Quality Systems Manager
IPC Manager

Amendment of a Works Order;

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇

▇▇▇▇▇▇▇▇ ▇
AD001 Adobe Build to Order

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Adobe Specific Procedure

Title
Adobe—BTO
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.9

Procedure No.
ADO 01
Rev. No.
0
Date
19-10-98
No. of Pages
2

Quality Systems Manager
Operations/IPC Managers

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Adobe Specific Procedure

Title
Adobe—BTO
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.9

Procedure No.
ADO 01
Rev. No.
0
Date
19-10-98
No. of Pages
2

Quality Systems Manager
Operations/IPC Managers

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix F
MAN09 Product Assembly

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Product Assembly
Uncontrolled copy #

Responsibility
Manufacturing Team Leader
ISO Ref.
4.9 & 4.10

Procedure No.
MAN 09
Rev. No.
2
Date
26-08-98
No. of Pages
2

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Europe Limited
Operating Procedure

Title
Product Assembly
Uncontrolled copy #

Responsibility
Manufacturing Team Leader
ISO Ref.
4.9 & 4.10

Procedure No.
MAN 09
Rev. No.
2
Date
26-08-98
No. of Pages
2

Quality Systems Manager
Operations Manager

[*]

For Non-Serialised Products
For Serialised Products

Order Quantity
Check Quantity
Order Quantity
Check Quantity

1st Off
Process
Last Off
1st Off
Process
Last Off

1 to 25
1
0
0
1 to 25
1
1
1

26 to 100
1
0
1
26 to 100
1
1 in 25
1

101 to 199
1
1
1
101 to 199
1
1 in 25
1

200+
1
1 in 200
1
200+
1
1 in 25
1

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

IMPORTANT: For ALL Adobe products in process check quantities must be 1 in 20.

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix G
1PC04 Creation/Amend. of Master Sample

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ IPC Department
Operating Procedure

Title
Creation and Amendment of a Master Product Sample
Uncontrolled copy #

Responsibility
Client Planning Administrator
ISO Ref.
4.9

Procedure No.
IPC 04
Rev. No.
0
Date
28-01-98
No. of Pages
3

Quality Systems Manager
IPC Manager

Creation of a Master Product Sample:

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ IPC Department
Operating Procedure

Title
Creation and Amendment of a Master Product Sample
Uncontrolled copy #

Responsibility
Client Planning Administrator
ISO Ref.
4.9

Procedure No.
IPC 04
Rev. No.
0
Date
28-01-98
No. of Pages
3

Quality Systems Manager
IPC Manager

Amendment of a Master Product Sample:

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ IPC Department
Operating Procedure

Title
Creation and Amendment of a Master Product Sample
Uncontrolled copy #

Responsibility
Client Planning Administrator
ISO Ref.
4.9

Procedure No.
IPC 04
Rev. No.
0
Date
28-01-98
No. of Pages
3

Quality Systems Manager
IPC Manager

[*]

This material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix H
DIST02 — Picking

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Picking (Post, Direct & Trade)
Uncontrolled copy #

Responsibility
Senior Team Lead — Distribution
ISO Ref.
4.9

Procedure No.
DIST 02
Rev. No.
2
Date
28-08-98
No. of Pages
2

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Picking (Post, Direct & Trade)
Uncontrolled copy #

Responsibility
Senior Team Lead — Distribution
ISO Ref.
4.9

Procedure No.
DIST 02
Rev. No.
2
Date
28-08-98
No. of Pages
2

Quality Systems Manager
Operations Manager

Shortage Escalation Checklist

Stock shortages should be investigated in the following order:

1.Double
check location indicated on Pick List.
2.Check
locations adjacent/opposite location indicated on Pick List.
3.If
Direct Stock—check stock history and if RMA stock, check RMA shelving.
4.Check
Despatch Note/GRN/Purchase Requisition and ascertain if product has been wrongly booked in or incorrectly bin to binned.
5.Stock
check other items in location for shortages and overs (see point 6).
6.Check
open batch consolidated Pick Slips for incorrect Picks.
7.Check
old locations (up to I year).
8.If
Client carries both Trade and Direct stock where transfers are conducted, check remaining department stock.
9.Sweep
warehouse.

NOTE If instructed by the Client/Client Services, orders may be partial or zero shipped at any stage in the above escalation path.

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix I
DIST04 — Packing

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Packing—Trade Orders
Uncontrolled copy #

Responsibility
Senior Team Lead—Distribution
ISO Ref.
4.9

Procedure No.
DIST 04
Rev. No.
0
Date
08-10-97
No. of Pages
2

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Packing—Trade Orders
Uncontrolled copy #

Responsibility
Senior Team Lead—Distribution
ISO Ref.
4.9

Procedure No.
DIST 04
Rev. No.
0
Date
08-10-97
No. of Pages
2

Quality Systems Manager
Operations Manager

CHECKLIST (The answers to all questions below must be "YES')

Pre-Packing:

Does
the Part Number on the products picked match that specified on the order?
Does the actual quantity of products picked match that specified on the order?
Do the Shipping details match those specified on the order?
Are the products picked free from damage/deterioration e.g. not torn, faded, stained, marked, creased etc.?
Is the product packaging intact?

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix J
DIST05 — Adobe Trade

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Adobe Trading System Contingency
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.9

Procedure No.
DIST 05
Rev. No.
0
Date
24-06-98
No. of Pages
2

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Adobe Trading System Contingency
Uncontrolled copy #

Responsibility
As Specified Below
ISO Ref.
4.9

Procedure No.
DIST 05
Rev. No.
0
Date
24-06-98
No. of Pages
2

Quality Systems Manager
Operations Manager

Contingency Plan

In
the event of ▇▇▇▇▇ Gala being unable to print orders from Adobe Trade System:

1.Request
Adobe to print/Fax Despatch Note batch and consolidated Pick Lists at Gala.
2.Manually
pack orders and pass to Shipping Office for UPS Maxiship system processing.
3.Manually
ship confirm orders when Adobe Trade System is fully operational.

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix K
IPC02—Cycle Counts

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Cycle Counts
Uncontrolled copy #

Responsibility
IPC Inventory Analyst
ISO Ref.
4.9

Procedure No.
IPC 02
Rev. No.
1
Date
08-03-99
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇▇▇ Distribution
Operating Procedure

Title
Cycle Counts
Uncontrolled copy #

Responsibility
IPC Inventory Analyst
ISO Ref.
4.9

Procedure No.
IPC 02
Rev. No.
1
Date
08-03-99
No. of Pages
2

Quality Systems Manager
IPC Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

Appendix L
STOR01—Incoming Stores Control

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

100

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

101

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

102

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

103

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

Goods In Quality checks

If the delivery is of a pallet of boxes—open 1 box and count the number of items in it.

Goods In Quality Checks

If the delivery is boxes of large items—open 1 box and count the number of items in it.

If
the delivery is boxes of small items—open 1 box and count a part of the box as a sample.

Does the actual number of items match the number on the box?

If YES, record this in the Goods In Database.

If NO, record this in the Goods In Database and inform the Client Team Manager.

QUALITY CHECKS:

1.Check
the total quantity of the delivery.
2.Find
the checking quantity from the table below.
3.When
you have checked them, have you found faults which would reject the order?

Quantity Delivered
Check
Accept the Delivery
Reject the Delivery

Between 2 and 10000
20
If no items are faulty
[*]

Between 10001 and 150000
80
If no items are faulty
[*]

Between 150001 and 500000
125
If no more than 1 Item is faulty
[*]

500001 and over
200
If no more than 1 item is faulty
[*]

Information
based on BS 6001 Part 1 : 1991 (ISO 2859-1 : 1989) Level 1—Reduced (AQL 0.25%)

If
YES, record the number you checked, the number which passed and the number which failed in the Goods In database and 'Inform the Client Team Manager.

If
NO, record the number you checked, the number which passed and the number which failed in the Goods In Database.

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

104

What to Check for: Compare the Samples Against the 1st Article Sign Off Copy

Component Types:
Reasons for Rejection:

All Components:
Anything that is different from the 1st Article Sign Off copy. Any physical damage of any kind.

Printed Components:
Loose pages in books. Colour changing from 1 sample to another. Faults which affect either the appearance of tile printed component or its use. (e.g. marks, torn pages, ink smudges, creased covers or pages, missing, extra or duplicate pages or
sections).

Media: Disks
Wrong shell colour, missing shutter.

CDs
Colour changing from 1 sample to another, Ink smudges.

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

105

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

Printed Labels:
The same as printed components PLUS labels which are not sticking to the rolls properly.

Boxes:
The same as printed components PLUS damaged comers and edges.

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

106

Appendix M
SOP01 — Team Lead

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

106

▇▇▇▇▇ SOP
Operating Procedure

Title
Help Desk
Uncontrolled copy #

Responsibility
Team Lead
ISO Ref.
4.9

Procedure No.
SOP 01
Rev. No.
0
Date
23-11-98
No. of Pages
1

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc.
This material, along with all copies made by or on behalf of the person to whom it is directed, shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇

▇▇▇▇▇▇▇▇ ▇
SOP07—Adobe RMA

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

108

▇▇▇▇▇ SOP
Operating Procedure

Title
Adobe Trade RMA
Uncontrolled copy #

Responsibility
Team Lead
ISO Ref.
4.13

Procedure No.
SOP 07
Rev. No.
0
Date
23-11-98
No. of Pages
1

Quality Systems Manager
Operations Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

109

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

[Exhibit] [*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

110

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

111

▇▇▇▇▇ Stores
Operating Procedure

Title
Incoming Stores Control and Inspection
Uncontrolled copy #

Responsibility
Goods In Team Leader
ISO Ref.
4.10

Procedure No.
STOR 01
Rev. No.
0
Date
19-10-98
No. of Pages
5

Quality Systems Manager
Stores Manager

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

112

Appendix M
SOP01 — Team Lead

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

113

▇▇▇▇▇ SOP
Operating Procedure

Title
Help Desk
Uncontrolled copy #

Responsibility
Team Lead
ISO Ref.
4.9

Procedure No.
SOP 01
Rev. No.
0
Date
23-11-98
No. of Pages
1

Quality Systems Manager
Operations Manager

[Exhibit] [*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

▇▇▇

▇▇▇▇▇▇▇▇ ▇
SOP07 — Adobe RMA

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

115

▇▇▇▇▇ SOP
Operating Procedure

Title
Adobe Trade RMA
Uncontrolled copy #

Responsibility
Team Lead
ISO Ref.
4.13

Procedure No.
SOP 07
Rev. No.
0
Date
23-11-98
No. of Pages
1

Quality Systems Manager
Operations Manager

[Exhibit] [*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

116

Appendix 0
VPP

[Exhibit]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

117

[*]

*CONFIDENTIAL
TREATMENT REQUESTED

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

118

Adobe
Systems Europe Ltd: ▇▇▇▇ of Materials

UK SKU No.
1012550101056
S/W Part No.
1

Description
Photoshop 5.5 Win Full Product GB

S/N Format
PWE55OR7(6)-ccc
2

EAN 5029766194216
Date Created 23/06/99

Part Number
Part Description
Language
Qty

9001 8162
PHSP 5.0 M/W User Guide GB 7/99
GB
1

9001 8015
PHSP 5.5 M/W Supplement GB 8/99
GB
1

9001 8035
PHSP 5.5 Win QRC GB 8/99
GB
1

9001 6599
Product Support Card GO 4/99
GB
1

9001 6684
Licence Agreement 5/99
ML
1

9001 6579
Registration Card GB 4/99
GB
1

9001 7995
PHSP 5.5 Win CD Application GB 8/99
GB
I

9001 8005
PHSP 5.5 M/W CD Tutorial GB 8/99
GB
1

9001 8047
PHSP 5.5 M/W CD ▇▇▇▇▇▇ ▇▇ 8/99
ML
1

0399 1657
Circular Security Seal
Generic
1

0397 1297
Adobe Generic Box
Generic
1

9001 8058
PHSP 5.5 Win Sleeve GB 8/99
GB
1

9000 8166
BSA Sticker ▇▇
▇▇
3

9001 3732
Win/Generic Platform SKU Label White
Generic
I

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

119

Comments

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

120

Part 2
Master Production Schedule

[Exhibit not available]

This
material constitutes confidential and proprietary information of Adobe Systems, Inc., and is directed to the person to whom it is given by an authorized representative of Adobe Systems, Inc. This
material may not be distributed, reproduced or divulged without written consent of Adobe Systems, Inc. This material, along with all copies made by or on behalf of the person to whom it is directed,
shall be returned immediately to Adobe Systems, Inc. upon Adobe Systems Inc.'s request.

122

QuickLinks

TERMS AND CONDITIONS OF PURCHASE

TURNKEY AGREEMENT

QuickLinks

Document Metadata

Document Metadata

Table of Contents