ANSI A117.1 definition
Examples of ANSI A117.1 in a sentence
Remove and replace sidewalks to provide an accessible route throughout public and common use areas that includes ANSI/ A117.1 compliant slopes (max 3% cross slope and max.
This paid leave shall continue so long as the employee continues as an OAPFF officer and is a member of the bargaining unit.
All elevators shall meet the Wisconsin Administrative Codes, SPS 318 and SPS 362 and the ANSI A117.1.
All entrances and exterior doors to be accessible with grade complying with ANSI A117.1 and Wisconsin Admin Code.
Respondents agree they will remove and replace the existing sidewalk to a measurement at or below a running slope of 5% and at or below a cross slope of 2% in compliance with the IBC 2006 (ANSI A117.1 2003), FHA, and ICRA (ANSI A117.1 1986).
Respondents agree that FaverGray will lower the thermostat controls in all four “Type A units” to a height no greater than 48 inches, as required by the FHA and ICRA (ANSI A117.1 2003).
ANSI A117.1: Providing Accessibility and Usability for Physically Handicap People.
Such facilities or improvements shall conform to ANSI A117.1 - R1980 "American Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by the Physically Handicapped".
Landings shall have a slope not steeper than 1:48 and shall comply with Section 302 See Figures 1 & 9 Near ▇▇▇▇ # ▇▇▇▇: o Curb ramp - grind, relevel or repour concrete to 8.33% grade or less on slope ANSI A117.1 {2003/2009] 405.2 Slope.
Jerry’s Homes agrees it will either rearrange the mailbox numbers at each mailbox kiosk for the five subject property buildings to provide all ground-floor tenants with mailboxes that do not exceed the height of 54 inches, as required by ANSI A117.1 2003, or install new mailbox kiosks at each of the five subject property buildings, so that none of the mailboxes exceed the maximum height of 54 inches.