ASTM Method definition

ASTM Method means a method published by and available from the American Society for Testing and Materials (ASTM).

AI-Powered Contracts

Draft, Review & Redline at the Speed of AI

ASTM Method means the method of testing of the Goods based on the ASTM Standards for Materials, Products, Systems & Services in accordance with the procedure and regulations of ASTM as provided at www.astm.org.

ASTM Method means the methods laid down by the American Society for Testing and Materials in the 1976 edition of standard definitions and specifications for petroleum and lubricating products;

Examples of ASTM Method in a sentence

A haze rating @ 25°C (77F) shall be a maximum of 2 using ASTM Method D4176-04 (2009) (Procedure 2) or latest revision thereof.
All Customer NGLs Tendered at the Receipt Points shall be of merchantable quality and shall conform to the applicable then-current specifications for each such NGL of the Gas Processors Association, Standard 2140 (or the equivalent ASTM International, ASTM Method D-1835).
The anchor pattern shall be verified through the use of replica tape in accordance with ASTM Method 4417, Field Measurement of Surface Profile on Blast Cleaned Steel.
A test must include three or more runs in which a pair of samples is obtained simultaneously for each run according to section 11.2.6 of ASTM Method D6735– 01.
To obtain measurable residue with light distillates, the fuel is first distilled to remove 90% (ASTM Method D86) by volume, and then the carbon residue is determined on the "10% Bottoms." One effect of a high carbon residue is carbon formation near the fuel nozzle.
For purposes of this Agreement:  “cordwood” means wood obtained from a tree that is round or split  “wood-burning fireplace” means a fireplace which is intended to burn cordwood, and for which testing via American Society for Testing and Materials (ASTM) Method E2558 is appropriate.
The post-test analyte spike procedure of section 11.2.7 of ASTM Method D6735–01 is conducted, and the percent recovery is calculated according to section 12.6 of ASTM Method D6735–01.
The quality of coal sold and purchased hereunder shall meet the following specifications: Expected Minimum Maximum ASTM Method As Received: Moisture % 6 4 8 D 3173 Volatiles % 35 30 36 D 3175 Fixed Carbon % 51 47 60 D 3172 Ash % 8.0 -- 10 D 3174 BTU/LB.
The spheres shall conform to the following gradation when tested in accordance with A.S.T.M Method of Test D-1214, "Method of Test for Sieve Analysis of Glass Beads" The beads shall meet the following gradation requirements: US Standard Screen %Passing 20 100 30 80-95 50 15-35 80 0-5 200 0-l The beads shall show an index of refraction within the range of 1.50 to 1.60.
Shore hardness A: 88 ± 2 at 20 ± 5 °C temperature Breaking strength: Ro ≥ 300 kg/cm2 Minimum elongation: Ao ≥ 400 per cent Module at 100 per cent elongation: ≥ 70 kg/cm2 Module at 300 per cent elongation: ≥ 130 kg/cm2 Low temperature brittleness (ASTM Method D 736): 5 hours at - 55 °C Compression set (Method B): 22 hours at 70 °C ≤ 45 per cent Density at 25 °C: 1.08 to 1.12 Ageing in air (ASTM Method D 573 (1981)): 70 hours at 100 °C: Shore hardness: max.

More Definitions of ASTM Method

ASTM Method means a method laid down by the American Society

ASTM Method means a test method published by the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103, USA;

Related to ASTM Method

Standard Methods means the examination and analytical procedures set forth in the most recent edition of "Standard Methods for the Examination of Water and Wastewater" published jointly by the American Public Health Association, the American Water Works Association, and the Water Pollution Control Federation.