Minimum distance definition
Examples of Minimum distance in a sentence
Lithotripsy - procedure cum operating room (without need for anaesthesia) 24 ▇▇.▇▇ Minimum distance between centres of two ICU beds 3.5 mt.
Minimum distance to the centerline of the nearest track shall be eleven feet (11') unless otherwise specifically agreed in writing by Railroad.
Minimum distance of hydrant to wall or building shall be 3 feet for the hydrant operating wrench clearance.
Minimum distance permitted between new skid trails will be 120 feet measured along the surface of the ground unless specifically waived in each case by the Sale Officer.
Item Clearance at the gate Visual aid implications Taxiway on bridges ICAO SARPS and ADM Minimum distance between a/c and obstacle = 7.5m but special circumstances on nose-in stands may permit reduction a) between terminal (including fixed pax bridge) and a/c nose and b) over any portion of stand provided with azimuth guidance by a visual docking guidance system.
Minimum distance between earth electrodes shall be two times the driven depth of the electrode.
Minimum distance classification used the mean vectors of the spectral signatures obtained from the three training sets, and calculated the Euclidean distance from each unknown pixel to the mean vector for each of the three classes.
Such orders should instructions on minimum C.P.A. (Closest Point of Approach) to be maintained, Minimum visibility at which the Master shall be called, Minimum distance from the land, or any other special instruction and / or requirement he may have.
Others - REGISTER Partner/s ATERSA Author/s ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ PV ANALYSIS OF PRELIMINARY DESIGN General notes for every design: - Minimum distance between strings: 14 mm.
These conditions are summarized in the following table: Maximum 50-year wind (average 10 minutes)* 38.5 m/s Maximum 50-year gust (average 5 s)* 57.4 m/s Maximum average annual speed 6.2 m/s Maximum intensity of turbulence 20% Minimum distance between WETs 5 rotor diameters in the main direction of the wind * at hub level Customer is responsible for ascertaining that the planned location of the WETs meets above parameters.