Power Measurement definition

Power Measurement means the determination of the characteristic IV curve of a Photovoltaic Module according to IEC-60904 with traceable calibrated equipment including the correction of the IV curve to Standard Test Conditions and the calculation of the maximum power point (Pmpp). Any uncertainty resulting from the calibration, the accuracy of the equipment, instabilities of the setup, the correction and calculations methods, or error propagations have to be determined and taken into account appropriately.

Examples of Power Measurement in a sentence

  • For power feeds of greater than sixty (60) amps terminated at the power board, Qwest will measure usage on a semi-annual basis if CLEC orders Optional DC Power Measurement.

  • For power feeds of greater than sixty (60) amps terminated at the power board, CenturyLink will measure usage on a semi-annual basis if CLEC orders Optional DC Power Measurement.

  • If CLEC orders Optional DC Power Measurement, Qwest will initially apply the -48 Volt DC Power Usage Charge from Exhibit A to the quantity of power ordered by CLEC.

  • The ANSI/CTA-2043: Set-top Box (STB) Power Measurement standard, as published in June 2013 by the Consumer Technology Association, will be used for all required power measurement values.

  • The ANSI/CTA-2043-A: Set-top Box (STB) Power Measurement standard, as published in November 2019 by the Consumer Technology Association, will be used for all required power measurement values.

  • Should Seller be acquired by a third party, notwithstanding Section 8.2, such acquiring company shall be prohibited from entering the associated Power Measurement, Network Measurement, Microwave Signal Generator, and Power Amplifier GPETE market(s) using the Acquired Assets, as set forth in Schedule 2.1, with their associated intellectual property.

  • The Agreement is hereby amended by adding terms, conditions and rates for DC Power Measurement as set forth in Attachment 1 and Exhibit A, to this Amendment, attached hereto and incorporated herein by this reference.

  • The Borrower has no Subsidiaries other than Power Measurement (Australia) Pty.

  • For power feeds of greater than sixty (60) amps terminated at the power board, Qwest will measure usage on a semi-annual basis if WSP orders Optional DC Power Measurement.

  • The Agreement is hereby amended by adding the Collocation DC Power Measurement terms and conditions, as set forth in Attachment 1, attached hereto and incorporated herein.

Related to Power Measurement

  • COVID-19 Measures means any quarantine, “shelter in place,” “stay at home,” workforce reduction, social distancing, shut down, closure, sequester or any other Law, directive, guidelines or recommendations by any Governmental Authority (including the Centers for Disease Control and the World Health Organization) in each case in connection with, related to or in response to COVID-19, including the Coronavirus Aid, Relief, and Economic Security Act (CARES) or any changes thereto.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Electric generating unit means an individual electric generator and its associated plant and apparatus whose electrical output is capable of being separately identified and metered. Emergency Condition shall mean a condition or situation: (1) that in the judgment of the Party making the claim is imminently likely to endanger life or property; or (2) that, in the case of the CAISO, is imminently likely (as determined in a non-discriminatory manner) to cause a material adverse effect on the security of, or damage to, the CAISO Controlled Grid or the electric systems of others to which the CAISO Controlled Grid is directly connected; (3) that, in the case of the Participating TO, is imminently likely (as determined in a non-discriminatory manner) to cause a material adverse effect on the security of, or damage to, the Participating TO’s Transmission System, Participating TO’s Interconnection Facilities, Distribution System, or the electric systems of others to which the Participating TO’s electric system is directly connected; or