Standard Operating Conditions definition

Standard Operating Conditions means, for Regasification Flow Rates up to five hundred (500) MMscfd and a minimum temperature of Regasified LNG at the outlet of the regasification module being five degrees centigrade (5°C): (a) when operating in Open Loop Configuration, based on a minimum seawater temperature of thirteen degrees centigrade (13°C); (b) when operating in Combined Loop Configuration, based on a minimum seawater temperature of seven degrees centigrade (7°C); and (c) when operating in Closed Loop Configuration, based on seawater temperatures below seven degrees centigrade (7°C).
Standard Operating Conditions means, with the minimum temperature of Regasified LNG at the outlet of the regasification module being five (5) degrees centigrade and a send-out pressure between (and including) eighty-four (84) ▇▇▇▇ and seventy-five (75) ▇▇▇▇: (a) when operating in Open Loop Configuration, based on a minimum seawater temperature of thirteen (13) degrees centigrade for Regasification Flow Rates up to four hundred (400) MMscfd; and (b) when operating in Combined Loop Configuration two hundred and forty (240) MMscfd, subject always to the provision of sufficient amount of warm water to facilitate such nomination.
Standard Operating Conditions means the heater is working up to original advertised specifications. If your heater is returned, we will fire test it with cured/ seasoned dry split hard wood logs in 18-22 inch lengths for 3-4 hours. During this burn, we will monitor the incoming and outgoing water temperatures with our pete ports and digital thermometer set. If the outgoing water is 3-11 degrees Celsius warmer than the incoming water, then

Examples of Standard Operating Conditions in a sentence

  • LINK® System Subscriber agrees that Pipeline shall have the unilateral right to file with the appropriate regulatory authority and to make changes effective in (a) the rates and charges applicable to service pursuant to this LINK® System Agreement; and (b) any provision of Pipeline's FERC Gas Tariff or Statement of General Terms and Standard Operating Conditions, as applicable, related to this LINK® System Agreement.

  • These operating conditions may be different from Standard Operating Conditions (Table 2-1).

  • Because of this, if the values of these conditions are different from the Standard Operating Conditions, adjustments will be made to the as-tested generator output to account for these differences.

  • General test conditions are as follows: -- The rating parameters for the Capacity Test herein referred to as Standard Operating Conditions are shown in Table 2-1.

  • Subject to Section 5.3 of ▇▇▇▇ Bluff’s Statement of General Terms and Standard Operating Conditions and without prejudice to such rights, this Contract may be terminated without notice by ▇▇▇▇ Bluff in the event Customer fails to pay part or all of the amount of any ▇▇▇▇ for service hereunder and such failure continues for thirty (30) days after payment is due.


More Definitions of Standard Operating Conditions

Standard Operating Conditions means, with the minimum temperature of Regasified LNG at the outlet of the regasification module being five degrees centigrade (5°C) and a send out pressure between (and including) eighty-four (84) barg and seventy-five (75) barg: (a) when operating in Open Loop Configuration, based on a minimum seawater temperature of thirteen degrees centigrade (13°C) for Regasification Flow Rates up to four hundred (400) MMscfd; and (b) when operating in Combined Loop Configuration two hundred and forty (240) MMscfd, subject always to the provision of sufficient amount of warm water to facilitate such nomination.

Related to Standard Operating Conditions

  • Normal Operating Conditions means those Service conditions which are within the control of Grantee. Those conditions which are not within the control of Grantee include, but are not limited to, natural disasters, civil disturbances, power outages, telephone network outages, and severe or unusual weather conditions. Those conditions which are ordinarily within the control of Grantee include, but are not limited to, special promotions, pay-per-view events, rate increases, regular peak or seasonal demand periods, and maintenance or upgrade of the Cable System.

  • Standard Listing Conditions has the meaning ascribed thereto in Section 4.3;

  • Standard operating procedure means a written document that provides detailed instructions for the performance of all aspects of an analysis, operation, or action.

  • Rating Condition has the meaning specified in Section 2.06(c)(ii).

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;