Temperature and humidity definition

Temperature and humidity means temperature and humidity maintained in the following ranges:
View Source

Examples of Temperature and humidity in a sentence

  • The laboratory building shall be constructed and installed with the appropriate facilities, Temperature and humidity controls shall be available wherever necessary during testing of samples.

  • Temperature and humidity are constantly monitored to maintain predefined values.

  • These forms shall record the following inspections: Surface preparation, Surface temperature, Dew point of substrate, Temperature and humidity of air, Batch numbers and identification of mixed coating components, WFT or application rate of individual coats, DFT of individual coats, recoat intervals, Location and repair of pinholes and Determination of degree of cure.

  • Temperature and humidity is measured and recorded at locations within the Data Center that represents an average ambient temperature and humidity reading.

  • Temperature and humidity range (shaded area) coincide with the 6 to 9 percent range within which most hardwood flooring is manufactured.

  • Temperature and humidity monitoring devices shall include an alarm system to notify the Contractor if the storage conditions deviate from normal by more than 10%.

  • Temperature and humidity controlled air conditioning ---------------- will be provided 24 hours a day to all technical facilities and tape storage areas.

  • Temperature and humidity at point of use to be within the band 21 Degrees Celsius +/- 2 Degrees Celsius.

  • Temperature and humidity index above 95 degrees Fahrenheit or below 22 degrees Fahrenheit or wind chill factor below 20 degrees Fahrenheit.

  • Temperature and humidity will be measured using an equivalent technique to ASTM E337-84(1996)e1.

Related to Temperature and humidity

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Pressure means the total load or force per unit area acting on a surface.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;