Water quality parameters definition

Water quality parameters means temperature, pH, conductivity, biocidal indicator, bacteriological indicator and other chemical and physical indicators of system process control.
Water quality parameters means the following parameters measured in accordance with rule 3745-81-87 of the Administrative Code: pH, water temperature, alkalinity, conductivity, calcium, orthophosphate and silica.
Water quality parameters. The leachate, shallow groundwater, and surface water samples have been analyzed for general water quality parameters, including pH, specific conductance,

Examples of Water quality parameters in a sentence

  • Water quality parameters are only measured when flowing water is present at the sample site; stagnant waters are not sampled.

  • Water quality parameters (temperature, pH, salinity, specific conductivity) are measured using a multi-parameter water quality sonde.

  • Water quality parameters identified in Table 1 are based on historical testing data that was completed after construction of existing Trinity ▇▇▇▇▇ located on-site.

  • Water quality parameters including pH, dissolved oxygen, specific conductance, redox potential, and total dissolved solids will be measured every two years, conditional upon the availability of a the Service hydrolab.

  • Water quality parameters will include dissolved oxygen, temperature, and salinity.

  • Water quality parameters such as pH, BOD, COD, DO, coliform count, total suspended solids, total dissolved solids, Iron, Fluorides etc.

  • Water quality parameters including pH, dissolved oxygen, conductivity and temperature will be measured in the field during each sampling event using a YSI®, Hydrolab®, or other similar multi-parameter probe.

  • Water quality parameters will be recorded using a multi-parameter instrument for the following parameters: dissolved oxygen, pH, salinity, conductivity, and water temperature.

  • Water quality parameters were measured during pumping until the parameters stabilized and the discharge was considered to be representative of the water in the aquifer rather than the well casing and surrounding filter pack.

  • Water quality parameters monitored will include pH, temperature, conductivity, dissolved oxygen (DO), running average DO saturation over a 24-hour period, BOD5, COD, and propylene glycol.


More Definitions of Water quality parameters

Water quality parameters means Wastewater directed to the City Facilities by the City and RM and shall be governed by the following Schedules: • Restricted Wastes Applicable to Sanitary Sewers, attached as Schedule C. • Prohibited Wastes, attached as Schedule D.
Water quality parameters means temperature, pH, conductivity, biocidal indicator, bacteriological

Related to Water quality parameters

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Water quality means the chemical, physical and biological condition of water.

  • Water quality standards or "WQS" means provisions of state or federal law that consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based on such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water, and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia), the Act (§ 62.1-44.15:24 et seq. of the Code of Virginia), and the CWA (33 USC § 1251 et seq.).

  • High-quality waters means all state waters, except:

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.