Access and Customer Premises Obligations Sample Clauses

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Pilot with access to all Customer locations for purposes of installation, maintenance, and repair of Pilot Equipment on premises where Service is provided, when applicable. Customer must provide such access, and Pilot shall provide reasonable notice under the circumstances to Customer prior to entering Customer’s point of presence to install, maintain or repair any of the Pilot Equipment. Customer will provide a safe place to work and comply with all applicable laws regarding the working conditions on the Customer premises. Pilot bears no responsibility for any delay to restore or repair its Services caused by Customer or a third party’s failure or delay in providing necessary access for Pilot technicians. Customer agrees to reimburse Pilot for any reasonable, out-of- pocket costs, without markup, including but not limited to permitting fees, labor, materials, and attorneys’ fees, resulting from the lack of proper landlord authorization for installation, provided that Pilot shall use commercially reasonable efforts to mitigate any such costs.

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Pilot with access to all Customer locations for purposes of installation, maintenance, and repair of Pilot Equipment on Customer or Customer End User’s premises. For purposes of the preceding sentence, “access” shall include without limitation any necessary license(s) or agreements to access the building and or property for the duration of the Service Term. Such licenses must specifically authorize Pilot to enter the building and perform the work specified on the Service Order, and Customer must provide all necessary licenses to Pilot before a Service Order can be accepted. However, notwithstanding Customer’s responsibility, if Pilot is required by a third party to obtain and maintain any such license to access the building or property, Customer agrees to reimburse Pilot for its costs related to obtaining and maintaining such licenses during the Service Term. Customer must provide such access Pilot shall provide reasonable notice under the circumstances to Customer prior to entering Customer’s point of presence to install, maintain or repair any of the Pilot Equipment. Customer will provide a safe place to work and comply with all applicable laws regarding the working conditions on the Customer premises. Pilot bears no responsibility for any delay to restore or repair its services

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Allstream with access to all Customer locations for purposes of installation, maintenance, and repair of Allstream Equipment on Customer premises. For purposes of the preceding sentence, “access” shall include without limitation any necessary license(s) to access the building and or property for the duration of the Service Term. However, notwithstanding Customer’s responsibility, if Allstream is required by a third party to obtain and maintain any such license to access the building or property, Customer agrees to reimburse Allstream for its costs related to obtaining and maintaining such licenses during the Service Term. Allstream shall provide reasonable notice under the circumstances to Customer prior to entering Customer’s point of presence to install, maintain or repair any of the Allstream Equipment. Customer will provide a safe place to work and comply with all applicable laws regarding the working conditions on the Customer premises. Allstream ports telephone numbers in accordance with regulatory guidelines. Current Carriers require specific detailed information when issuing a port request. Customer may be required to provide such detail to help facilitate the successful completion of such a request. These requests can take 10 business days to complete depending on region and current carrier.

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Pilot with access to all Customer locations for purposes of installation, maintenance, and repair of Pilot Equipment on Customer or Customer End User’s premises. For purposes of the preceding sentence, “access” shall include without limitation any necessary license(s) or agreements to access the building and or property for the duration of the

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Zayo with all necessary information and access to all applicable Customer locations for purposes of providing the Offerings, including installation, maintenance, and repair of Zayo Components on Customer premises. For purposes of the preceding sentence, “access” shall include without limitation any necessary license(s) to access, occupy and conduct telecommunication operations within each respective building and or property for the duration of the Order Term (including any necessary rights for Zayo to enter and access each building, and for providing all necessary cable pathways, building access and/or occupancy fees, riser fees, cross-connects and cross-connect fees, coordination at any third party owned location, and, where applicable, necessary space for Zayo’s fiber termination panel). However, notwithstanding Customer’s foregoing responsibility, if Zayo is required by a third party to obtain and maintain any such license to access the building or property, Customer agrees to reimburse Zayo for its costs related to obtaining and maintaining such licenses during the Order Term. Zayo shall provide reasonable notice under the circumstances to Customer prior to entering Customer’s point of presence to install, maintain or repair any of the Zayo Components.

Access and Customer Premises Obligations. In support of Zayo meeting the Estimated Delivery Date, Customer specifically acknowledges that Customer is responsible for all work and Costs on the premise side of each Demarcation Point, including technically compatible cross-connections. In addition, Customer shall be responsible for securing all rights and paying the related Costs to connect to the Demarcation Point and for securing all rights and paying the related Costs to access, occupy, and conduct typical telecommunication operations within each respective building (including any necessary rights for Zayo to enter and access each building), and for providing all necessary cable pathways (all of the preceding may include, but not be limited to, construction permits and underlying rights, building access and/or occupancy agreements, building access and/or occupancy fees, Lateral fees, riser fees, cross- connects and cross-connect fees, coordination at any third party owned location, and, where applicable, necessary space for Zayo's fiber termination panel). All of the above, collectively, shall be referred to as "Customer Requirements" and Customer shall reimburse Zayo in the event that a third party bills Zayo for charges related to such Customer Requirements. Customer acknowledges that any delay in Customer providing such Customer Requirements may delay Zayo from completing work at any location.

Access and Customer Premises Obligations. In support of Awarded Bidder meeting the Estimated Access Date, Customer specifically acknowledges that Customer is responsible for all work and Costs on the premise side of each Demarcation Point, including technically compatible cross-connections. In addition, Customer shall be responsible for securing all rights and paying the related Costs to connect to the Demarcation Point and for securing all rights and paying the related Costs to access, occupy, and conduct typical telecommunication operations within and to each respective building (including any necessary rights for Awarded Bidder to enter and access each building), and for providing all necessary cable pathways in and to the respective buildings (all of the preceding may include, but not be limited to, construction permits and underlying rights, wayleaves, building access and/or occupancy agreements, building access and/or occupancy fees, lateral/conduit fees, riser fees, cross-connects and cross-connect fees, coordination at any third party owned location, and, where applicable, necessary space for Awarded Bidder’s fiber termination panel). All of the above, collectively, shall be referred to as “Customer Requirements” and Customer shall reimburse Awarded Bidder in the event that a third party bills Awarded Bidder for charges related to such Customer Requirements. If Customer satisfies a Customer Requirement by purchasing Service from Awarded Bidder, Awarded Bidder may pass through and Customer shall pay Awarded Bidder for any increase in the charges to Awarded Bidder by a third party which Awarded Bidder utilizes to provide Customer the Customer Requirement. Customer acknowledges that any delay in Customer providing such Customer Requirements may delay Awarded Bidder from completing work at any location. Subject to the limitations set forth in this Customer Schedule, Customer shall use the optical fiber strands of the Offering solely for lawful purposes. In no event whatsoever shall Customer directly or indirectly transfer, sell, assign, swap, exchange, lease, sublease, license, sublicense, resell or grant indefeasible or other rights of use in or to all or any part of the optical fiber strands as “dark fiber” as such term is commonly understood in the telecommunications industry. A violation of this provision shall be a material default and shall subject Customer to immediate termination. Except as expressly set forth herein as part of the access rights included within the Dark Fiber Offering,...

Access and Customer Premises Obligations. In support of Zayo meeting the Estimated Access Date, Customer specifically acknowledges that Customer is responsible for all work and Costs on the premise side of each Demarcation Point, including technically compatible cross-connections. In addition, Customer shall be responsible for securing all rights and paying the related Costs to connect to the Demarcation Point and for securing all rights and paying the related Costs to access, occupy, and conduct typical telecommunication operations within and to each respective building (including any necessary rights for Zayo to enter and access each building), and for providing all necessary cable pathways in and to the respective buildings (all of the preceding may include, but not be limited to, construction permits and underlying rights, wayleaves, building access and/or occupancy agreements, building access and/or occupancy fees, lateral/conduit fees, riser fees, cross-connects and cross-connect fees, coordination at any third party owned location, and, where applicable, necessary space for ▇▇▇▇’s fiber termination panel). All of the above, collectively, shall be referred to as “Customer Requirements” and Customer shall reimburse Zayo in the event that a third party bills Zayo for charges related to such Customer Requirements. If Customer satisfies a Customer Requirement by purchasing Service from Zayo, Zayo may pass through and Customer shall pay Zayo for any increase in the charges to Zayo by a third party which Zayo utilizes to provide Customer the Customer Requirement. Customer acknowledges that any delay in Customer providing such Customer Requirements may delay Zayo from completing work at any location.

Access and Customer Premises Obligations. Customer, at its sole cost and expense, shall provide Allstream with access to all Customer locations for purposes of installation, maintenance, and repair of Allstream Equipment on Customer premises. For purposes of the preceding sentence, “access” shall include without limitation any necessary license(s) to access the building and or property for the duration of the Service Term. However, notwithstanding Customer’s responsibility, if Allstream is required by a third party to obtain and maintain any such license to access the building or property, Customer agrees to reimburse Allstream for its costs related to obtaining and maintaining such licenses during the Service Term. Allstream shall provide reasonable notice under the circumstances to Customer prior to entering Customer’s point of presence to install, maintain or repair any of the Allstream Equipment. Customer will provide a safe place to work and comply with all applicable laws regarding the working conditions on the Customer premises.