Architect and Architect Sample Clauses

The 'Architect and Architect' clause defines the roles, responsibilities, and relationship between the architect and any other architects involved in a project. It typically clarifies which party is the lead architect, how coordination and communication are managed, and the division of design or supervisory duties among multiple architects. This clause ensures that all architectural parties understand their scope of work and authority, thereby preventing overlaps, confusion, or disputes during the project.
Architect and Architect s Consultants shall maintain, in a commercially acceptable format, and produce any data which Owner, its agents or consultants may reasonably request for the purpose of determining the correctness and accuracy of the charges made pursuant to this Agreement and shall afford Owner reasonable access to such books, records, receipts, vouchers, and other documents in order to verify the compensation as represented in Architect’s invoices. Owner shall have the right to audit all charges made pursuant to this Agreement at any time and in its sole discretion. In regard to the foregoing and generally, Architect hereby authorizes Owner, its agents or consultants to check directly with Architect’s Consultants as to the charges for labor, materials and other items appearing in Architect’s invoices and to obtain waivers of lien from Architect’ Consultants, if such information or items cannot be obtained through Architect. The provisions of this Section 9.5 shall survive for a period of five (5) years following completion of the Project, or termination of the Agreement.
View SourceView Similar (3)
Architect and Architect s consultants shall provide assistance to the Owner in preparing a six-month written evaluation of the Project’s finish hardware and HVAC systems.
View SourceView Similar (2)
Architect and Architect s consultants shall only take direction on any issue regarding the Project when provided by Owner’s Office of Construction Services.
View SourceView Similar (2)
Architect and Architect s Consultants of all tiers shall keep and maintain detailed, organized documents and data relating to the Services for a period of at least six (6) years after the date of Final Completion of the Work on a Project or off-season Commissioning of all equipment, whichever is later.
View Source
Architect and Architect s consultants shall provide assistance to Owner in preparing an 11-month written evaluation of items of repair, replacement, etc., for warranty items.
View Source
Architect and Architect s Consultants shall review and approve or take other appropriate action upon Contractor's submittals such as Shop Drawings, Product Data and Samples, but only for conformance with the design concept of the Project set forth in the Contract Documents; and, to Architect’s best knowledge and belief, compliance with applicable laws, statutes, ordinances, codes, orders, rules, regulations and Owner’s policies, relative to design. Architect shall respond to Contractor’s inquiries and questions and provide such supplemental information as appropriate. Architect’s response to Contractor shall be made with reasonable promptness so as to cause no unreasonable delay to Contractor's Critical Path progress, but within fourteen (14) calendar days unless otherwise agreed by Owner and Architect. Architect’s approval of a specific item shall not indicate approval of an assembly of which the item is a component.
View Source

Related to Architect and Architect

  • Architect Engineer shall provide assistance to Owner through the commissioning consultant/agent for the purpose of advising and counseling Owner’s personnel in the usage, operation and maintenance of the building mechanical, electrical, and plumbing systems.

  • Architect/Engineer (A/E) means a person registered as an architect pursuant to Tex. Occ. Code ▇▇▇., Chapter 1051, as a landscape architect pursuant to Tex. Occ. Code ▇▇▇., Chapter 1052, a person licensed as a professional engineer pursuant to Tex. Occ. Code ▇▇▇., Chapter 1001 and/or a firm employed by Owner or a design-build contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • The Architect ENGINEER shall prepare for the State a revised accounting of how the Project responds to LEED criteria.

  • SCOPE OF ARCHITECT’S BASIC SERVICES 3.1 The Architect’s Basic Services consist of those described in this Article 3 and include usual and customary structural, mechanical, and electrical engineering services. Services not set forth in this Article 3 are Supplemental or Additional Services. § 3.1.1 The Architect shall manage the Architect’s services, research applicable design criteria, attend Project meetings, communicate with members of the Project team, and report progress to the Owner. § 3.1.2 The Architect shall coordinate its services with those services provided by the Owner and the Owner’s consultants. The Architect shall be entitled to rely on, and shall not be responsible for, the accuracy, completeness, and timeliness of, services and information furnished by the Owner and the Owner’s consultants. The Architect shall provide prompt written notice to the Owner if the Architect becomes aware of any error, omission, or inconsistency in such services or information. § 3.1.3 As soon as practicable after the date of this Agreement, the Architect shall submit for the Owner’s approval a schedule for the performance of the Architect’s services. The schedule initially shall include anticipated dates for the commencement of construction and for Substantial Completion of the Work as set forth in the Initial Information. The schedule shall include allowances for periods of time required for the Owner’s review, for the performance of the Owner’s consultants, and for approval of submissions by authorities having jurisdiction over the Project. Once approved by the Owner, time limits established by the schedule shall not, except for reasonable cause, be exceeded by the Architect or Owner. With the Owner’s approval, the Architect shall adjust the schedule, if necessary, as the Project proceeds until the commencement of construction. § 3.1.4 The Architect shall not be responsible for an Owner’s directive or substitution, or for the Owner’s acceptance of non-conforming Work, made or given without the Architect’s written approval. § 3.1.5 The Architect shall contact governmental authorities required to approve the Construction Documents and entities providing utility services to the Project. The Architect shall respond to applicable design requirements imposed by those authorities and entities. § 3.1.6 The Architect shall assist the Owner in connection with the Owner’s responsibility for filing documents required for the approval of governmental authorities having jurisdiction over the Project.

  • Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents. 9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise. 9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade. 9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise. 9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents. 9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same. 9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications. 9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified. 9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”