Building Ventilation Sample Clauses

POPULAR SAMPLE Copied 1 times
Building Ventilation. Roof or wall mounted ventilation fans and intake louvers will be provided to maintain the turbine hall, water treatment area, diesel generator rooms, and maintenance/warehouse areas to a temperature of 95F or less if required during the average ambient conditions and within 15F of the ambient temperature during high summer temperatures as measured at the STG operating floor and the platform at the CTG roof elevation.
View Source
Building Ventilation. Premises shall comply with Title 8, Section 5142, California Code of Regulations, "Mechanically Driven Heating, Ventilating and Air Conditioning (HVAC) Systems" to provide minimum building ventilation. Provided, however, that Landlord may terminate this Lease Agreement should it decide that repair expenses, do not merit the continuance of this Lease Agreement. Tenant shall be given notice by ▇▇▇▇▇▇▇▇ of said decision and notice shall provide Tenant adequate time to make other arrangements.
View SourceView Similar (3)
Building Ventilation. 1. The dwelling must be evaluated for compliance with Section 4 of the ASHRAE 62.2‐2010 Ventilation and Acceptable Indoor Air Quality in Low‐Rise Residential Buildings. 2. In no case shall the whole building ventilation rate be reduced below minimum whole‐ building ventilation requirements of ASHRAE 62.2 standards. 3. Where ventilation rates do not meet ASHRAE 62.2 standards, mechanical ventilation shall be provided to maintain minimum ventilation rates. 4. Existing exhaust ventilation discharge must be evaluated for proper discharge location. a. Relocation of exhaust vents may be required if located too close to fresh air intakes of the dwelling.
View Source

Related to Building Ventilation

  • Ventilation Where noxious or poisonous gases may accumulate, the City shall provide proper protection and ventilation. Proper lighting and ventilation shall be provided for all enclosed working spaces. All work in enclosed and confined spaces shall be performed in accordance with applicable Federal, State and local regulations. Spray painting shall be done only by qualified painters.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit E during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep all of the operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System.

  • Heating The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • HVAC Heating, ventilating and air conditioning.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.