BURIED CONDUIT Clause Samples

The Buried Conduit clause defines the requirements and responsibilities related to the installation, protection, and maintenance of conduits that are placed underground. Typically, this clause specifies standards for depth, materials, marking, and the process for locating and repairing conduits if they are damaged during or after installation. For example, it may require that all buried conduits be clearly mapped and that any excavation work in the area follow specific procedures to avoid accidental damage. The core function of this clause is to ensure the safe and reliable placement of underground conduits, minimizing the risk of service interruptions, property damage, or safety hazards.
BURIED CONDUIT. The work in these items shall include but not limited to the followings: Drilling boxes, going through curbs or buried walls Removal of boulders or any obstructions Where conduit is to terminate in a concrete box, Contractor shall use an electric drill and rotary core bit to drill the box as part of the conduit item
View SourceView Similar (4)
BURIED CONDUIT. Item 45(a)1 Replace conduit under paved surfaces including permanent pavement restoration (non-protected roadway). Furnish and install conduit size 1 1/2". Item 45(a)2 Replace conduit under paved surfaces including permanent pavement restoration (non-protected roadway). Furnish and install conduit size 2". Item 45(a)3 Replace conduit under paved surfaces including permanent pavement restoration (non-`protected roadway). Furnish and install conduit size 3".
View SourceView Similar (3)
BURIED CONDUIT. Item 45(a)1 - Replace conduit under paved surfaces including permanent pavement restoration (non- protected roadway). Furnish and install conduit size 1 1/2". Item 45(a)2 - Replace conduit under paved surfaces including permanent pavement restoration (non- protected roadway). Furnish and install conduit size 2". Item 45(a)3 - Replace conduit under paved surfaces including permanent pavement restoration (non-` protected roadway). Furnish and install conduit size 3". Item 45(b)1 - Replace conduit under unpaved surfaces. Furnish and install conduit size 1 1/2". Item 45(b)2 - Replace conduit under unpaved surfaces. Furnish and install conduit size 2". Item 45(b)3 - Replace conduit under unpaved surfaces. Furnish and install conduit size 3". Item 45(c)1 - Furnish all labor, material and equipment necessary to sawcut paved area to a depth of 6" and furnish and install 2" conduit at a depth of 18" or as directed by the EIU, including the permanent pavement restoration per foot on a protected street/guaranteed roadway. Item 45(c)2 - Furnish all labor, material and equipment necessary to sawcut paved area to a depth of 6" and furnish and install 3" conduit at a depth of 18" or as directed by the EIU, including the permanent pavement restoration per foot on a protected street/guaranteed roadway. Item 45(d)1 - Furnish and install 2" conduit. Conduit to be driven under roadway. Item 45(d)2 - Furnish and install 3" conduit. Conduit to be driven under roadway. 4.78.1 The Contractor shall furnish all labor, material, and equipment necessary to replace defective conduit or parkway cables. The new conduit shall be the same size as the conduit being replaced. The Contractor shall do all the necessary excavation, expose and remove the existing conduit and section in the new replacement conduit. The new conduit and its installation shall meet the requirements of Section 4.39. The excavation shall be backfilled and the surface area restored to its original condition as required by the NYCDOT Highway Rules. When the replacement conduit terminates in a pull box or lamppost, it shall be provided with grounding bushing bonded, as directed by the EIU. All pull box covers that are opened for access must be secured with tamper- proof screws as per DWG Nos. J-3179 A and B. 4.78.2 The Contractor shall ensure that:
View SourceView Similar (3)
BURIED CONDUIT. The trench shall not be backfilled until the conduit has been inspected and approved by the Engineer. Clean fill must be used. All conduits which are installed underground shall not be less than eighteen (18") below the final grade unless otherwise directed The conduits shall be laid in a uniform manner, properly spaced and graded without traps, so that all condensation will drain into the nearest box. Where conduit cannot be drained to pull boxes, a drain "T" shall be installed at the low point with a one cubic foot dry well of broken stone.
View Source

Related to BURIED CONDUIT

  • Hot Weather Guidelines For the purposes of site based discussions regarding the need to plan and perform work during expected periods of hot weather, the following issues shall be considered in conjunction with proper consideration of Occupational Health and Safety issues.

  • Termination of Related Party Agreements Except as set forth on Schedule 9.7, all existing agreements between the Company and the Stockholders (and between the Company and entities controlled by the Stockholders) shall have been canceled effective prior to or as of the Consummation Date.

  • Acknowledgement and Consent to Bail-In of EEAAffected Financial Institutions Notwithstanding anything to the contrary in any Loan Document or in any other agreement, arrangement or understanding among any such parties, each party hereto acknowledges that any liability of any EEAAffected Financial Institution arising under any Loan Document may be subject to the Write-Down and Conversion Powers of an EEAthe applicable Resolution Authority and agrees and consents to, and acknowledges and agrees to be bound by: (a) the application of any Write-Down and Conversion Powers by an EEAthe applicable Resolution Authority to any such liabilities arising hereunder which may be payable to it by any party hereto that is an EEAAffected Financial Institution; and (b) the effects of any Bail-In Action on any such liability, including, if applicable: (i) a reduction in full or in part or cancellation of any such liability; (ii) a conversion of all, or a portion of, such liability into shares or other instruments of ownership in such EEAAffected Financial Institution, its parent entity, or a bridge institution that may be issued to it or otherwise conferred on it, and that such shares or other instruments of ownership will be accepted by it in lieu of any rights with respect to any such liability under this Agreement or any other Loan Document; or (iii) the variation of the terms of such liability in connection with the exercise of the Write-Down and Conversion Powers of any EEAthe applicable Resolution Authority.

  • Acknowledgement and Consent to Bail-In of Affected Financial Institutions Notwithstanding anything to the contrary in any Loan Document or in any other agreement, arrangement or understanding among any such parties, each party hereto acknowledges that any liability of any Affected Financial Institution arising under any Loan Document, to the extent such liability is unsecured, may be subject to the write-down and conversion powers of the applicable Resolution Authority and agrees and consents to, and acknowledges and agrees to be bound by: (a) the application of any Write-Down and Conversion Powers by the applicable Resolution Authority to any such liabilities arising hereunder which may be payable to it by any party hereto that is an Affected Financial Institution; and (b) the effects of any Bail-in Action on any such liability, including, if applicable: (i) a reduction in full or in part or cancellation of any such liability; (ii) a conversion of all, or a portion of, such liability into shares or other instruments of ownership in such Affected Financial Institution, its parent undertaking, or a bridge institution that may be issued to it or otherwise conferred on it, and that such shares or other instruments of ownership will be accepted by it in lieu of any rights with respect to any such liability under this Agreement or any other Loan Document; or (iii) the variation of the terms of such liability in connection with the exercise of the write-down and conversion powers of the applicable Resolution Authority.

  • Replacement of Key Personnel The Engineer must notify the State in writing as soon as possible, but no later than three business days after a project manager or other key personnel is removed from association with this contract, giving the reason for removal.