Common use of Cageless Clause in Contracts

Cageless. BellSouth shall allow CLEC-1 to collocate CLEC-1’s equipment and facilities without requiring the construction of a cage or similar structure. BellSouth shall allow CLEC-1 to have direct access to its equipment and facilities. BellSouth shall make cageless collocation available in single bay increments. Except where CLEC-1’s equipment requires special technical considerations (e.g., special cable racking, isolated ground plane, etc.), BellSouth shall assign cageless Collocation Space in conventional equipment rack lineups where feasible. For equipment requiring special technical considerations, CLEC-1 must provide the equipment layout, including spatial dimensions for such equipment pursuant to generic requirements contained in Telcordia GR-63-Core, and shall be responsible for compliance with all special technical requirements associated with such equipment. 3.1.1 At CLEC-1’s expense, CLEC-1 may arrange with a contractor certified by BellSouth (“Certified Contractor”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, CLEC-1 and CLEC-1’s Certified Contractor must comply with the more stringent local building code requirements. CLEC-1’s Certified Contractor shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with CLEC-1 and provide, at CLEC-1’s expense, the documentation, including architectural drawings, necessary for CLEC-1 to obtain the zoning, permits and/or other licenses. CLEC-1’s Certified Contractor shall ▇▇▇▇ ▇▇▇▇-1 directly for all work performed for CLEC-1 pursuant to this Agreement and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the CLEC-1’s Certified Contractor. CLEC-1 must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access CLEC-1’s locked enclosure prior to notifying CLEC-1. Upon request, BellSouth shall construct the enclosure for CLEC-1. 3.1.2 BellSouth may elect to review CLEC-1’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. BellSouth shall complete its review within fifteen (15) calendar days. CLEC-1 shall be able to design caged enclosures in amounts as small as sufficient to house and maintain a single rack or bay of equipment. If BellSouth reviews CLEC-1’s plans and specifications prior to construction, then BellSouth will have the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. If BellSouth elects not to review CLEC-1’s plans and specifications prior to construction, CLEC-1 will be entitled to request BellSouth to review; and in the event CLEC-1 does not request a BellSouth review, BellSouth shall have the right to inspect the enclosure after construction to make sure it is constructed according to BellSouth’s guidelines and specifications. BellSouth may require CLEC-1 to remove or correct within seven (7) calendar days at CLEC-1’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth guidelines and specifications.

Cageless. BellSouth shall allow CLEC-1 WebShoppe to collocate CLEC-1WebShoppe’s equipment and facilities without requiring the construction of a cage or similar structure. BellSouth shall allow CLEC-1 WebShoppe to have direct access to its equipment and facilities. BellSouth shall make cageless collocation available in single bay increments. Except where CLEC-1WebShoppe’s equipment requires special technical considerations (e.g., special cable racking, isolated ground plane, etc.), BellSouth shall assign cageless Collocation Space in conventional equipment rack lineups where feasible. For equipment requiring special technical considerations, CLEC-1 WebShoppe must provide the equipment layout, including spatial dimensions for such equipment pursuant to generic requirements contained in Telcordia GR-63-Core, and shall be responsible for compliance with all special technical requirements associated with such equipment. 3.1.1 At CLEC-1WebShoppe’s expense, CLEC-1 WebShoppe may arrange with a contractor certified by BellSouth (“Certified Contractor”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, CLEC-1 WebShoppe and CLEC-1WebShoppe’s Certified Contractor must comply with the more stringent local building code requirements. CLEC-1WebShoppe’s Certified Contractor shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with CLEC-1 WebShoppe and provide, at CLEC-1WebShoppe’s expense, the documentation, including architectural drawings, necessary for CLEC-1 WebShoppe to obtain the zoning, permits and/or other licenses. CLEC-1WebShoppe’s Certified Contractor shall ▇▇▇▇ ▇▇▇▇-1 WebShoppe directly for all work performed for CLEC-1 WebShoppe pursuant to this Agreement Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the CLEC-1WebShoppe’s Certified Contractor. CLEC-1 WebShoppe must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access CLEC-1WebShoppe’s locked enclosure prior to notifying CLEC-1WebShoppe. Upon request, BellSouth shall construct the enclosure for CLEC-1WebShoppe. 3.1.2 BellSouth may elect to review CLEC-1WebShoppe’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. BellSouth shall complete its review within fifteen (15) calendar days. CLEC-1 WebShoppe shall be able to design caged enclosures in amounts as small as sufficient to house and maintain a single rack or bay of equipment. If BellSouth reviews CLEC-1WebShoppe’s plans and specifications prior to construction, then BellSouth will have the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. If BellSouth elects not to review CLEC-1WebShoppe’s plans and specifications prior to construction, CLEC-1 WebShoppe will be entitled to request BellSouth to review; and in the event CLEC-1 WebShoppe does not request a BellSouth review, BellSouth shall have the right to inspect the enclosure after construction to make sure it is constructed according to BellSouth’s guidelines and specifications. BellSouth may require CLEC-1 WebShoppe to remove or correct within seven (7) calendar days at CLEC-1WebShoppe’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth guidelines and specifications.

Cageless. BellSouth shall allow CLEC-1 ALEC Inc., to collocate CLEC-1ALEC Inc.,’s equipment and facilities without requiring the construction of a cage or similar structure. BellSouth shall allow CLEC-1 ALEC Inc., to have direct access to its equipment and facilities. BellSouth shall make cageless collocation available in single bay increments. Except where CLEC-1ALEC Inc.,’s equipment requires special technical considerations (e.g., special cable racking, isolated ground plane, etc.), BellSouth shall assign cageless Collocation Space in conventional equipment rack lineups where feasible. For equipment requiring special technical considerations, CLEC-1 ALEC Inc., must provide the equipment layout, including spatial dimensions for such equipment pursuant to generic requirements contained in Telcordia GR-63-Core, and shall be responsible for compliance with all special technical requirements associated with such equipment. 3.1.1 At CLEC-1ALEC Inc.,’s expense, CLEC-1 ALEC Inc., may arrange with a contractor certified by BellSouth (“Certified Contractor”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, CLEC-1 ALEC Inc., and CLEC-1ALEC Inc.,’s Certified Contractor must comply with the more stringent local building code requirements. CLEC-1ALEC Inc.,’s Certified Contractor shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with CLEC-1 ALEC Inc., and provide, at CLEC-1ALEC Inc.,’s expense, the documentation, including architectural drawings, necessary for CLEC-1 ALEC Inc., to obtain the zoning, permits and/or other licenses. CLEC-1ALEC Inc.,’s Certified Contractor shall ▇▇▇▇ ▇▇▇▇-1 ▇ Inc., directly for all work performed for CLEC-1 ALEC Inc., pursuant to this Agreement Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the CLEC-1ALEC Inc.,’s Certified Contractor. CLEC-1 ALEC Inc., must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access CLEC-1ALEC Inc.,’s locked enclosure prior to notifying CLEC-1ALEC Inc.,. Upon request, BellSouth shall construct the enclosure for CLEC-1ALEC Inc.,. 3.1.2 BellSouth may elect to review CLEC-1ALEC Inc.,’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. BellSouth shall complete its review within fifteen (15) calendar days. CLEC-1 ALEC Inc., shall be able to design caged enclosures in amounts as small as sufficient to house and maintain a single rack or bay of equipment. If BellSouth reviews CLEC-1ALEC Inc.,’s plans and specifications prior to construction, then BellSouth will have the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. If BellSouth elects not to review CLEC-1ALEC Inc.,’s plans and specifications prior to construction, CLEC-1 ALEC Inc., will be entitled to request BellSouth to review; and in the event CLEC-1 ALEC Inc., does not request a BellSouth review, BellSouth shall have the right to inspect the enclosure after construction to make sure it is constructed according to BellSouth’s guidelines and specifications. BellSouth may require CLEC-1 ALEC Inc., to remove or correct within seven (7) calendar days at CLEC-1ALEC Inc.,’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth guidelines and specifications.

Cageless. BellSouth shall allow CLEC-1 ALEC Inc., to collocate CLEC-1ALEC Inc.,’s equipment and facilities without requiring the construction of a cage or similar structure. BellSouth shall allow CLEC-1 ALEC Inc., to have direct access to its equipment and facilities. BellSouth shall make cageless collocation available in single bay increments. Except where CLEC-1ALEC Inc.,’s equipment requires special technical considerations (e.g., special cable racking, isolated ground plane, etc.), BellSouth shall assign cageless Collocation Space in conventional equipment rack lineups where feasible. For equipment requiring special technical considerations, CLEC-1 ALEC Inc., must provide the equipment layout, including spatial dimensions for such equipment pursuant to generic requirements contained in Telcordia GR-63-Core, and shall be responsible for compliance with all special technical requirements associated with such equipment. 3.1.1 At CLEC-1ALEC Inc.,’s expense, CLEC-1 ALEC Inc., may arrange with a contractor certified by BellSouth (“Certified Contractor”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, CLEC-1 ALEC Inc., and CLEC-1ALEC Inc.,’s Certified Contractor must comply with the more stringent local building code requirements. CLEC-1ALEC Inc.,’s Certified Contractor shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with CLEC-1 ALEC Inc., and provide, at CLEC-1ALEC Inc.,’s expense, the documentation, including architectural drawings, necessary for CLEC-1 ALEC Inc., to obtain the zoning, permits and/or other licenses. CLEC-1ALEC Inc.,’s Certified Contractor shall ▇▇▇▇ ▇▇▇▇-1 bill ALEC Inc., directly for all work performed for CLEC-1 ALEC Inc., pursuant to this Agreement Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the CLEC-1ALEC Inc.,’s Certified Contractor. CLEC-1 ALEC Inc., must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access CLEC-1ALEC Inc.,’s locked enclosure prior to notifying CLEC-1ALEC Inc.,. Upon request, BellSouth ▇▇▇▇▇▇▇▇▇ shall construct the enclosure for CLEC-1ALEC Inc.,. 3.1.2 BellSouth may elect to review CLEC-1ALEC Inc.,’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. BellSouth shall complete its review within fifteen (15) calendar days. CLEC-1 ALEC Inc., shall be able to design caged enclosures in amounts as small as sufficient to house and maintain a single rack or bay of equipment. If BellSouth reviews CLEC-1ALEC Inc.,’s plans and specifications prior to construction, then BellSouth will have the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. If BellSouth elects not to review CLEC-1ALEC Inc.,’s plans and specifications prior to construction, CLEC-1 ALEC Inc., will be entitled to request BellSouth to review; and in the event CLEC-1 ALEC Inc., does not request a BellSouth review, BellSouth shall have the right to inspect the enclosure after construction to make sure it is constructed according to BellSouth’s guidelines and specifications. BellSouth may require CLEC-1 ALEC Inc., to remove or correct within seven (7) calendar days at CLEC-1ALEC Inc.,’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth guidelines and specifications.

Cageless. BellSouth shall allow CLEC-1 ALEC Inc., to collocate CLEC-1ALEC Inc.,’s equipment and facilities without requiring the construction of a cage or similar structure. BellSouth shall allow CLEC-1 ALEC Inc., to have direct access to its equipment and facilities. BellSouth shall make cageless collocation available in single bay increments. Except where CLEC-1ALEC Inc.,’s equipment requires special technical considerations (e.g., special cable racking, isolated ground plane, etc.), BellSouth shall assign cageless Collocation Space in conventional equipment rack lineups where feasible. For equipment requiring special technical considerations, CLEC-1 ALEC Inc., must provide the equipment layout, including spatial dimensions for such equipment pursuant to generic requirements contained in Telcordia GR-63-Core, and shall be responsible for compliance with all special technical requirements associated with such equipment. 3.1.1 At CLEC-1ALEC Inc.,’s expense, CLEC-1 ALEC Inc., may arrange with a contractor certified by BellSouth (“Certified Contractor”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, CLEC-1 ALEC Inc., and CLEC-1ALEC Inc.,’s Certified Contractor must comply with the more stringent local building code requirements. CLEC-1ALEC Inc.,’s Certified Contractor shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with CLEC-1 ALEC Inc., and provide, at CLEC-1ALEC Inc.,’s expense, the documentation, including architectural drawings, necessary for CLEC-1 ALEC Inc., to obtain the zoning, permits and/or other licenses. CLEC-1ALEC Inc.,’s Certified Contractor shall ▇▇▇▇ ▇▇▇▇-1 bill ALEC Inc., directly for all work performed for CLEC-1 ALEC Inc., pursuant to this Agreement Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the CLEC-1ALEC Inc.,’s Certified Contractor. CLEC-1 ALEC Inc., must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access CLEC-1ALEC Inc.,’s locked enclosure prior to notifying CLEC-1ALEC Inc.,. Upon request, BellSouth shall construct the enclosure for CLEC-1ALEC Inc.,. 3.1.2 BellSouth may elect to review CLEC-1ALEC Inc.,’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. BellSouth shall complete its review within fifteen (15) calendar days. CLEC-1 ALEC Inc., shall be able to design caged enclosures in amounts as small as sufficient to house and maintain a single rack or bay of equipment. If BellSouth reviews CLEC-1ALEC Inc.,’s plans and specifications prior to construction, then BellSouth will have the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. If BellSouth elects not to review CLEC-1ALEC Inc.,’s plans and specifications prior to construction, CLEC-1 ALEC Inc., will be entitled to request BellSouth to review; and in the event CLEC-1 ALEC Inc., does not request a BellSouth review, BellSouth shall have the right to inspect the enclosure after construction to make sure it is constructed according to BellSouth’s guidelines and specifications. BellSouth may require CLEC-1 ALEC Inc., to remove or correct within seven (7) calendar days at CLEC-1ALEC Inc.,’s expense any structure that does not meet these plans and specifications or, where applicable, BellSouth guidelines and specifications.