Class Maintenance Studies Sample Clauses

The Class Maintenance Studies clause establishes the requirements and procedures for conducting studies to assess and maintain the classification status of a vessel or asset. Typically, this clause outlines the frequency, scope, and responsible parties for such studies, ensuring that the asset continues to meet the standards set by the relevant classification society. For example, it may require periodic inspections, documentation reviews, or technical assessments to verify ongoing compliance. The core function of this clause is to ensure the safety, reliability, and regulatory compliance of the asset by mandating regular evaluation and maintenance of its classification status.
Class Maintenance Studies. The Employer may initiate class maintenance studies related to a specific class or a group of positions within a department/division as needed to maintain the integrity of the Employer’s classification system. The Employer will consider requests by the Union to initiate such studies. The format of these studies may include an informal survey of changes in the kind, responsibility, or difficulty of work performed since the classification was last studied or an in-depth study of the changes in the kind, responsibility, or difficulty of work performed since the classification was last studied. If a class or group of positions is reclassified pursuant to a class maintenance study to a class providing a higher maximum salary, no vacancy shall be deemed to have been created. Upon reclassification, the incumbent employees shall be appointed to the reclassified position and the incumbent employee’s pay shall be determined in accordance with Section 9.03, Subd. 1 of this Agreement. The effective date of the reclassification for pay purposes shall be January 1st of the calendar year following completion of the study. Incumbent employees shall maintain the classification seniority date of their previous classification as the classification seniority date of the new classification. The provisions of this section shall apply only to the incumbent employees who have been permanently certified to the involved positions.
View SourceView Similar (8)
Class Maintenance Studies. The Employer may initiate class maintenance studies related to a specific class or a group of positions within a department/division as needed to maintain the integrity of the Employer’s classification system. The Employer will consider requests by the Union, a Department, or a Division to initiate such studies. The format of these studies may include an informal survey or an in-depth study of changes in the kind, responsibility, or difficulty of work performed since the classification was last studied. If a classification or group of positions is reclassified following a class maintenance study to a class providing a higher maximum salary, no vacancy shall be deemed to have been created. Upon reclassification, the incumbent employees shall be appointed to the reclassified position and the incumbent employees’ pay shall be determined in accordance with Section 9.03, Subd. 1 of this Agreement. The effective date of the reclassification for pay purposes shall be January 1st of the calendar year following completion of the study. Incumbent employees shall maintain the classification seniority date of their previous classification as the classification seniority date of the new classification. The provisions of this section shall apply only to the incumbent employee who has been permanently certified to the involved positions.
View SourceView Similar (5)
Class Maintenance Studies. The Employer may initiate class maintenance studies related to a specific class or a group of positions within a department/division to maintain the integrity of the Employer’s classification system. The Employer will consider requests by the Union, a Department, or a Division to initiate such studies. The format of these studies may include an informal survey or an in-depth study of changes in the kind, responsibility, or difficulty of work performed since the classification was last studied at the discretion of the Human Resources Department. Individuals in a studied class may not request a position study while the Maintenance Study is in progress. If the study is not completed within 120 days, the employee may request an individual position audit using the previously stated process and time frames for job audits. If a class or group of positions is/are reclassified pursuant to a class maintenance study to a class providing a higher maximum salary, no vacancy shall be deemed to have been created. Upon reclassification, the incumbent employees shall be appointed to the reclassified position and the incumbent employees’ pay shall be determined in accordance with Section 9.03, Subd. 1 of this Agreement. The effective date of the reclassification for pay purposes shall be January 1st of the calendar year following completion of the study. Incumbent employees shall maintain the classification seniority date of their previous classification as the classification seniority date of the new classification. The provisions of this section shall apply only to the incumbent employees who have been permanently certified to the involved positions. When a class or group of positions is/are reclassified pursuant to a Maintenance Study to a class providing a lower maximum salary, the involved incumbent employee may request that the reclassification be considered to be a layoff. If so requested, the provisions of Article 8 ("▇▇▇▇▇▇ and Recall From Layoff") shall be applied. In the alternative, the involved incumbent employee may elect to remain in the reclassified position and the incumbent employee's pay shall be frozen until such time as the salary for the new classification is the same or greater than the salary as frozen, at which point the salary schedule for the classification shall govern future changes. Beginning January 1, 2016, the Human Resources Department will develop an on-going schedule of class maintenance studies that provides for a maintenance study on a ...
View SourceView Similar (5)

Related to Class Maintenance Studies

  • Planned Maintenance (a) Subject to any modification or amendment of this Agreement made pursuant to Section 4.2(c) or Section 7.3(d), Planned Maintenance occurring during the Delivery Term shall be coordinated and scheduled in accordance with this Section 9.6. Seller shall perform all Planned Maintenance (including Major Planned Maintenance) in a manner that optimizes the generation and benefits to Buyer of the Contract Energy, Storage Energy, and other Products (e.g., during off-peak periods and low-irradiance periods) and, without limiting the foregoing, either (i) outside of Daylight Hours or (ii) during the months of October and November only, during Daylight Hours; provided, however, that the foregoing restrictions shall not apply to any Planned Maintenance that Seller is required to perform pursuant to any applicable manufacturer warranty that cannot reasonably be performed by Seller subject to such restrictions. (b) Seller shall deliver to Buyer a proposed schedule for Planned Maintenance in respect of each Contract Year (“Planned Maintenance Schedule”) no later than ninety (90) Days before the start of such Contract Year. Planned Maintenance Schedules submitted by Seller shall (i) comply with the second sentence of Section 9.6(a) and (ii) include reasonably detailed descriptions of the Planned Maintenance to be performed, the Days and times in which each type of Planned Maintenance is scheduled to be performed, the estimated amount(s) of Contract Capacity and Storage Capacity that will be unavailable due to Planned Maintenance and the total number of hours that Seller expects that the Contract Capacity and Storage Capacity will be unavailable due to Planned Maintenance. The general form for the Planned Maintenance Schedule is set forth in Schedule 9.6. (The Planned Maintenance descriptions reflected in the general form set forth in Schedule 9.6 are provided for indicative purposes only, and are not necessarily representative of the detail, time periods, or certainty required for a Planned Maintenance Schedule hereunder.) (c) Buyer shall have the right to disapprove, in its reasonable discretion (provided that Buyer shall have the right to disapprove, in its sole and absolute discretion, any Planned Maintenance proposed by Seller that is inconsistent with the terms of this Agreement), any Planned Maintenance set out in any Planned Maintenance Schedule proposed by Seller for any Contract Year, except for any Planned Maintenance that (i) is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November or (ii) Seller is required to perform pursuant to any applicable manufacturer warranty and that is scheduled to occur in compliance with Section 9.6(a). If Seller submits its Planned Maintenance Schedule for a Contract Year in accordance with the requirements of this Agreement and Buyer does not disapprove of any Planned Maintenance set out in such Planned Maintenance Schedule by sixty (60) days after submission, then such Planned Maintenance Schedule shall be deemed approved. If Buyer, in the exercise of its discretion as set forth above, disapproves any Planned Maintenance in such Planned Maintenance Schedule within the applicable time period specified above after its submission, Buyer shall notify Seller and the Parties shall use Commercially Reasonable Efforts to agree upon and finalize a mutually acceptable Planned Maintenance Schedule for the applicable Contract Year. Seller shall conduct Planned Maintenance during such Contract Year only in accordance with an agreed Planned Maintenance Schedule; provided, however, that Seller may (A) move Planned Maintenance included in an agreed Planned Maintenance Schedule that is not Major Planned Maintenance, so long as such move is consistent with the terms of this Agreement (including the second sentence of Section 9.6(a)) or, with respect to Major Planned Maintenance, if such Major Planned Maintenance is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November and (B) schedule and perform Planned Maintenance not reflected in the Planned Maintenance Schedule so long as such Planned Maintenance is scheduled to be performed outside of Daylight Hours or during Daylight Hours during the months of October and November and Seller provides Buyer at least two (2) weeks’ prior written notice of such Planned Maintenance; provided further that Buyer shall have the right to advise Seller of periods when Buyer prefers, based on solar irradiance, supply, market and other conditions, that any Major Planned Maintenance be deferred, and Seller shall use Commercially Reasonable Efforts to comply with such request. (d) Seller shall use Commercially Reasonable Efforts to complete any Planned Maintenance and place the Facility back into full commercial operation as soon as reasonably possible. If Seller determines that any Planned Maintenance scheduled in an agreed Planned Maintenance Schedule no longer needs to be completed or will not consume the entire time scheduled therefor in the agreed Planned Maintenance Schedule, Seller shall provide (i) a Generation Forecast to Buyer reflecting the forecasted amount of Delivered Energy during each affected interval that takes into account such change and (ii) in the case of any Major Planned Maintenance, a written notice declaring the cessation and termination of the applicable Major Planned Maintenance period (in which event, the Major Planned Maintenance period shall terminate in accordance with the terms of such Generation Forecast and written notice).

  • Hardware Maintenance Hardware Purchased from NCR Voyix or a Reseller is eligible for coverage under NCR Voyix’s Hardware Maintenance Policy for an additional monthly fee, provided however, that some restrictions apply. Subscribed Hardware includes Hardware Maintenance at no additional charge, subject to timely payment of all fees. Provided that you are current on your payment obligations and otherwise in compliance with this Agreement, your Hardware Maintenance includes remote maintenance services and support via telephone, email or live text or chat on the terms stated at the Account Portal (you acknowledge that third-party message and data rates may apply). NCR Voyix’s now-current Hardware Maintenance Policy can be found at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇.▇▇▇/dam/restaurant/docs/ncr-us- merchant-hw-maintenance-policy-ac.pdf.

  • Routine Maintenance (i) CRC shall be responsible for Routine Maintenance when necessary or desirable to maintain the Shared Assets in a safe operating condition, and to permit and facilitate (A) the performance by CRC of its obligations pursuant to this Agreement, and (B) the use of Shared Assets by the Operators in accordance with this Agreement. (ii) CSXT or NSR, directly or through their respective affiliates, may perform the work which CRC performed prior to the date of this Agreement when (A) CRC does not possess the skills needed for such work, (B) CRC lacks the necessary employees to do such work in a timely fashion, or (C) CRC does not possess the equipment needed to do such work. CRC and the party performing the work shall agree to a reasonable fee for such work prior to performance. CRC, CSXT and NSR may agree to have additional work performed either by CSXT, NSR or their affiliates.

  • Maintenance Work Landlord reserves the right from time to time, but subject to payment by and/or reimbursement from Tenant as otherwise provided herein: (i) to install, use, maintain, repair, replace, relocate and control for service to the Premises and/or other parts of the Project pipes, ducts, conduits, wires, cabling, appurtenant fixtures, equipment spaces and mechanical systems, wherever located in the Premises or the Project, (ii) to alter, close or relocate any facility in the Premises or the common areas or otherwise conduct any of the above activities for the purpose of complying with a general plan for fire/life safety for the Project or otherwise, and (iii) to comply with any federal, state or local law, rule or order. Landlord shall attempt to perform any such work with the least inconvenience to Tenant as is reasonably practicable, but in no event shall Tenant be permitted to withhold or reduce Basic Rental or other charges due hereunder as a result of same, make any claim for constructive eviction or otherwise make any claim against Landlord for interruption or interference with Tenant's business and/or operations.

  • Maintenance Outages If Seller reasonably determines that it is necessary to schedule a Maintenance Outage, Seller shall notify Buyer of the proposed Maintenance Outage at least five (5) days before the outage begins (or such shorter period to which Buyer may reasonably consent in light of then existing conditions). Upon such notice, the Parties shall plan the Maintenance Outage to mutually accommodate the reasonable requirements of Seller and the service obligations of Buyer; provided, however, that, unless Buyer otherwise consents, such consent not to be unreasonably withheld, no Maintenance Outage may be scheduled between the hour ending 0700 through the hour ending 2200, Monday through Saturday, during the time period commencing on May 15 and concluding on September 15. Notice of a proposed Maintenance Outage shall include the expected start date and time of the outage, the amount of Capacity of the Facility that will not be available, and the expected completion date and time of the outage. Seller shall give Buyer notice of the Maintenance Outage as soon as Seller determines that the Maintenance Outage is necessary. Buyer shall promptly respond to such notice and may request reasonable modifications in the schedule for the outage. Seller shall use all reasonable efforts to comply with any request to modify the schedule for a Maintenance Outage. Seller shall notify Buyer of any subsequent changes in Capacity available to Buyer or any changes in the Maintenance Outage completion date and time. As soon as practicable, any notifications given orally shall be confirmed in writing. Seller shall take all reasonable measures and exercise its best efforts in accordance with Prudent Electrical Practices to minimize the frequency and duration of Maintenance Outages.