Common use of CLEC to CLEC Conversions for Unbundled Loops Clause in Contracts

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LEC’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.10.1 The CLEC to CLEC conversion process for Loops may be used by US LEC AFN when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECAFN’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.10.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.10.3 The Loops converted to US LEC AFN pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC AFN when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECAFN’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC AFN pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC CCI when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECCCI’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC CCI pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC DSL when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECDSL’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC DSL pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Spectrotel when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECSpectrotel’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC Spectrotel pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC I-55 when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECI-55’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC I-55 pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.11.1 The CLEC to CLEC conversion process for Loops may be used by US LEC BTI when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECBTI’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.11.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.11.3 The Loops converted to US LEC BTI pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC OnePoint when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECOnePoint’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC OnePoint pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Utility USA when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECUtility USA’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC Utility USA pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC FPB when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECFPB’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC FPB pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Ring Connection when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECRing Connection’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC Ring Connection pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.11.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Sprint when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECSprint’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.11.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.11.3 The Loops converted to US LEC Sprint pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC UTI when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECUTI’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC UTI pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Grande when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECGrande’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC Grande pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.10.1 The CLEC to CLEC conversion process for Loops may be used by US LEC CommuniGroup when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECCommuniGroup’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.10.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.10.3 The Loops converted to US LEC CommuniGroup pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC ONS when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECONS’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC ONS pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC INET when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECINET’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC INET pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.11.1 The CLEC to CLEC conversion process for Loops may be used by US LEC U-Dial when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECU-Dial’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.11.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.11.3 The Loops converted to US LEC U-Dial pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC FLATEL when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECFLATEL’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC FLATEL pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC OnFiber when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECOnFiber’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC OnFiber pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 2.1.11.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Cinergy when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECCinergy’s Interconnection Agreement before requesting a conversion. 2.1.9.2 2.1.11.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 2.1.11.3 The Loops converted to US LEC Cinergy pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.

CLEC to CLEC Conversions for Unbundled Loops. 2.1.9.1 The CLEC to CLEC conversion process for Loops may be used by US LEC Conextel when converting an existing Loop from another CLEC for the same End User. The Loop type being converted must be included in US LECConextel’s Interconnection Agreement before requesting a conversion. 2.1.9.2 To utilize the CLEC to CLEC conversion process, the Loop being converted must be the same Loop type with no requested changes to the Loop, must serve the same End User location from the same serving wire center, and must not require an outside dispatch to provision. 2.1.9.3 The Loops converted to US LEC Conextel pursuant to the CLEC to CLEC conversion process shall be provisioned in the same manner and with the same functionality and options as described in this Agreement for the specific Loop type.